Viking DVA-2W Manuals

600 OHM E & M USE ONLY LISTED CLASS 2 POWER SOURCE 12V -------- 0.5 A MAX CO/PABX LINE E & M PROTOCOLS VIKING ELECTRONICS INC. HUDSON, WI 54016 1 2 3 4 VIKING © MODEL DVA-LP LINE POWERED ANNOUNCER R BK W G Y R G APPLICATION APPLICATION Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes. Fax Back Doc 849 Rev A Printed in the U.S.A. The DVA-1002 has been discontinued. This application note will explain how to replace the DVA-1002 with more versatile digital announcers. Our complete line of profession- al, cost-effective Digital Announcers suit every application! For applications requiring 4 wire E & M and a ring trip night message, a combination of the DVA-500A and the DVA-LP is recommended. For applications requiring both day and night ring messages, two DVA-LPs with a 16 second maxi- mum record time are suggested. For applications requiring messages up to 60 seconds, the DVA- 500A and a ERAM-60 memory expansion kit are recommended. These solutions provide superior sound quality with non-volatile E 2 memory, and remote record capabilities, all at a reduced cost. NNoottee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY Ring Trip R/G DVA-1002 Replacement Solution January 21, 2000 Replacing the DVA-1002 with other Digital Voice Announcers DVA-500A DVA-LP Four Wire E&M Six wire cable G and R BK Y W 600 Ohm Audio M lead (start) E lead (busy) Earth Ground Four Wire E&M DVA-LP Rear View of the DVA-500A Fax Back Number 825 110 115 125 127 128 129 813 PPhhoonnee......771155..338866..88886611 hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom m PPrroodduucctt SSuuppppoorrtt LLiinnee......771155..338866..88666666 FFaaxx BBaacckk LLiinnee......771155..338866..44334455 Model All DVA-2W DVA-500A DVA-1003B DVA-3003 DVA-LP DVA-TNT ERAM-60 Description and Features Comparison of all announcers Promotion on Hold Single Channel Digital Announcer 3 Channel Digital Announcer 3 Channel Long Play Announcer Line Powered Digital Announcer Time and Temperature Announcer Memory Expansion Kit For more information on Viking’s Digital Announcers, call the Fax Back Line at 715-386-4345 and follow the simple directions. Viking also offers Technical Practices and Application Notes on the web. Check it out: http://www.vikingelectronics.com

110 128 115 125 127 129 Digital Digital Announcers Announcers December 30, 1999 PPhhoonnee......771155..338866..88886611 hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom m APPLICATION APPLICATION NNoottee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes. Fax Back Doc 825 Rev B Printed in the U.S.A. PPrroodduucctt SSuuppppoorrtt LLiinnee......771155..338866..88666666 FFaaxx BBaacckk LLiinnee......771155..338866..44334455 Digital Announcers for Every Application! Model DVA-2W DVA-LP DVA-500A DVA-1003B DVA-3003 DVA-TNT Fax Back Document Number Viking features a complete line of professional, cost-effective Digital Announcers! These announcers range from multi-port, multi-channel ACD/UCD announcers to promotion on hold announcers to store casters to simple ring-trip announcers to time and temperature announc- ers. All Viking Digital Announcers feature high-quality non-volatile E2 memory and range from 16 seconds to 12 minutes of record time. For expandable units, Viking offers simple memory expansion modules. 1 1 1 3 3 1 Number of Ports 1min 16sec 16sec 16sec 1min 30sec Factory Record Time Maximum Record Time       Non-Volatile Memory      Remote Recording/Programming      Locally Recordable     Tape Download     Multiple Messages     Message Repeater n/a n/a n/a  n/a Record All Channels at Once 16 16 16 1 E & M Protocols    Programmable “BOM” Duration       Ring -Trip Interface n/a    Programmable Ring Delay 64K 64K 64K 64K 64K 64K Sampling Rate (Equivalent) n/a     CPC Disconnect    Transfer After Announcement A L A A/D A/D A 120VAC(A)/48VDC(D)/Line Power (L)   19” Rack Mountable 4min 16sec 1min 1min 12min 100sec 1 4 2 3 1 1 1 2 4 3 3 3 Per channel. The DVA-3003 can be expanded to 4 minutes per channel or configured as a 4-12 minute single channel announcer. The DVA-2W is designed for promotion on hold applications and provides a 1.5 watt output. For a single port, long play, ring trip announcer, the DVA-2W must be used in combination with the RAD-1 (Fax Back Document 410). Includes factory default canned messages. FFeeaattuurreess aanndd O Oppttiioonnss DVA-3003 DVA-1003B DVA-500A DVA-TNT DVA-2W DVA-LP

ERAM-60 ERAM-60 Memory Expansion Kit for the DVA-2W, DVA-500A, DVA- 1003B, DVA-3003 and FBI-1A May 7, 2001 PPhhoonnee......771155..338866..88886611 iinnffoo@ @vviikkiinnggeelleeccttrroonniiccss..ccoom m hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom m Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity Description: (1) 28-pin ERAM chip (1 minute of record time) Expand the Voice Record Time of Viking Products The ERAM-60 Memory Expansion Kit is designed to expand the voice record memory of specified Viking products using non-volatile memory. Each kit includes one 28 pin non-volatile memory chip which provides one minute of PPrraaccttiiccee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY TECHNICAL TECHNICAL SSppeecciiffiiccaattiioonnss IInnssttaallllaattiioonn Important: Electronics componants are sensitive to static electricity. Personnel and the work area should be grounded before handling. A. DVA-2W Memory Expansion 1. Disconnect the power to the DVA-2W. 2. Remove the (2) screws on the bottom of the unit, then remove the cover. 3. Insert the ERAM chip(s) carefully into the appro- priate socket(s) with the indents facing in the dir- ection shown in the diagram below. 4. Replace the cover and screws of the DVA-2W. Model DVA-2W DVA-500A DVA-1003B DVA-3003 FBI-1A # of Kits up to 3 1 up to 3 up to 9 1 Factory Record Time 1 minute 16 seconds 16 seconds per channel 1 minute per channel (3 minutes total) 16 seconds Maximum Record Time 4 minutes 1 minute 1 minute 4 minutes per channel (12 minutes total) 1 minute VIKING ELECTRONICS ERAM-60 REV B Kit 3 Kit 2 Kit 1 ERAM-60 record time. The num- ber of chips required is dependant on the record time required and the capacity of the announcer.

The DVA-2W's non-volatile E memory eliminates the need for batteries or costly built in tape decks. This provides the convenience of recording at the shop or professional studio and then shipping to the installation site. The output of the DVA-2W may also be connected directly to loudspeakers and played at the push of a button for museum displays, information booths, point of interest locations, etc. • Three playback options: 1. On demand 2. Continuous 3. Timed intervals • Non-volatile E memory (no batteries required) • 1-4 minutes of record time • Built in 2 watt amplifier • Tape or microphone input for recording • Automatic or manual record capability • Multiple message capability • AGC (Automatic Gain Control) for trouble free recording • Auxiliary music input for between message background music • Remote switch interface for on demand playback Power: 120VAC/12VDC 500 mA UL listed, adapter provided Dimensions: 119mm x 36mm x 71mm (4.7” x 1.4” x 2.8”) Shipping Weight: .67 kg (1.5 lbs.) Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non- condensing humidity Frequency: 100-3.4KHz Sampling Rate: 64K (equivalent) Message Length: 1 minute, expandable up to 4 minutes using (3) ERAM-60 memory expansion kits (Fax Back Document 130) Audio Output Power: 2 watt peak Connections: 4 position screw terminal block, (1) 3mm (1/8”) audio jack Promote Your Business While Customers Hold! VIKING© Technical Practice Telecommunication Peripheral Products DVA-2W Non-Volatile, Digital Voice Announcer February 19, 1999 Features Applications Sales...(715) 386 - 8861 Specifications The DVA-2W is a digital record and announce device with a built in 2 watt amplifier. Designed to provide music and promotion on hold, the DVA-2W can playback in a continuous loop or alternate between promotions and an auxiliary music source at 15 to 60 second intervals. Any number of multiple promotion messages may be recorded. • Promotion on Hold • Message Repeater for: 1. Museum and Informational Displays 2. Car Rental "Leave the keys in the ignition" 3. Airport "Loading and unloading only..." 4. Smoking "This is a non-smoking building..." 5. Amusement Parks “Please keep your hands in the vehicle at all times” http://www.VikingElectronics.com [email protected] 2 2