Viking E-1600A Manuals

1600A Series 1600A Series ADA Compliant Emergency Phones July 3, 2001 PPhhoonnee......771155..338866..88886611 iinnffoo@ @vviikkiinnggeelleeccttrroonniiccss..ccoom m hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom m ADA* Compliant Emergency Phone with Built-In Digital Voice Announcer The 1600A series can also be used with Central Station Monitoring equipment. All parameters, phone numbers and location numbers are stored in non-volatile E2 memory. All units are phone line powered, requiring no batteries or external power sources. Attention Panasonic DBS Users: The 576 DBS systems do not conform to analog telecom standards and are incompati- ble with the 1600A Series Emergency Phones and E-30 Handsfree Phones unless modified. To use these products with a Panasonic 576 DBS System, please retrieve Fax Back Document 857. • Non-volatile digital voice announcer with 10 seconds of voice memory • Advanced call progress detection • Can automatically light the “Call Connected” LED for the hearing impaired • Handsfree operation • Phone line powered • Non-volatile E2 memory (no batteries required) • Touch Tone or pulse dialing • Dials up to 5 different numbers on busy or no answer • Transmits a unique location I.D. code • Grade 2 Braille label for the visually impaired • Hangs up on CPC, silence, busy signal, dial tone, time out or Touch Tone command • Programmable to auto-answer on incoming calls • Remotely programmable • Extended temperature range (-15°F to 130°F) • 5 different chassis or board only available • Central Station Monitoring capability • Separate central station voice speed dial number • Optional PB-100 Polling System available • Elevators • Parking ramps • ATM machines • Area of refuge locations • Lobbies • Entryways • Campus emergency stations • Roadside emergency stations • Stadiums • Convention centers The 1600A series emergency phones are designed to provide quick and reli- able handsfree communication over the public switched telephone network. The 1600A series meets ADA* requirements for elevator telephones, and can be pro- grammed from any Touch Tone phone. The 1600A series phones can automat- ically send the digital announcement to identify the location of the emergency call, then automatically light the call connected LED. PPrraaccttiiccee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY TECHNICAL TECHNICAL FFeeaattuurreess AApppplliiccaattiioonnss * Americans with Disabilities Act of 1992 contains federal reg- ulations regarding elevator telephones (Public Law 101-336). E-1600-45A K-1600-EHFA E-1600A E-1600-02A E-1600-03A ! Sold by: http://www.TWAcomm.com Toll Free: (877) 892-2666

grammed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, includ- ing phone numbers and location numbers, are stored in non-volatile E2 memory. All units are phone line powered, requiring no batteries or external power and are compatible with common Central Station Monitoring equipment. For outdoor or harsh environments, select 1600A Series phones are available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, hand soldered silicon sealed connections, gel-filled butt connectors, as well as urethane potted circuit boards with weather sealed, field-adjustable trim pots and DIP switch- es for easy on-site programming. The 1600A Series ADA Compliant Emergency Phones are designed to provide quick and reliable handsfree communi- cation for any standard analog telephone line or analog phone system station port. All 1600A Series phones meet ADA requirements for elevator/ emergency tele- phones, and can be programmed from any Touch Tone phone. The phones can dial up to 5 program- mable emergency numbers, as well as 2 central station numbers. In addition, the E- 1600-20A and E-1600-52A feature a sec- ond "INFO" button that will dial up to 3 non- emergency numbers. The 1600A Series phones can be pro- 1600A 1600A Series Series ADA Compliant Emergency Phones June 3, 2004 ADA* Compliant Emergency Phones with Built-In Digital Voice Announcer • Meets ADA requirements for Emergency Phones: - Can automatically light the “Call Connected” LED for the hearing impaired - Transmits a unique location I.D. code or voice announcement - Grade 2 Braille label for the visually impaired • Non-volatile digital voice announcer with 16 seconds of voice memory • Advanced call progress detection • Handsfree operation • Phone line powered • Non-volatile E2 memory (no batteries required) • Touch Tone or pulse dialing • Dials up to 5 emergency numbers • E-1600-20A and E-1600-52A dial up to 3 non-emergency “INFO” numbers • Cycles through backup emergency and non-emergency numbers on busy or no-answer • Optional Enhanced Weather Protection (EWP) • Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command • Programmable to auto-answer on incoming calls • Remotely programmable • Extended temperature range (-15°F to 130°F) • 7 different chassis or board only available • Available in a 42” tall tower phone model E-1600-BLT-EWP • Central Station Monitoring capability (dials 2 numbers) • Separate central station voice speed dial number • Optional PB-100 Polling System available • Optional BLK-3-EWP strobe light kit available PPrraaccttiiccee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY TECHNICAL TECHNICAL FFeeaattuurreess E-1600-45A K-1600-EHFA E-1600A E-1600-02A E-1600-03A E-1600-20A Power: Telephone line powered, 24V DC talk battery with 20mA loop current minimum Dimensions: See Installation and Specifications Operating Temperature: -26° C to 54° C (-15° F to 130° F) Humidity - Standard Products: 5% to 95% non-condensing Humidity - EWP Products: Up to 100% SSppeecciiffiiccaattiioonnss * Americans with Disabilities Act of 1992 contains federal reg- ulations regarding elevator telephones (Public Law 101-336). • Elevators • Parking ramps/lots • ATM machines • Area of refuge locations • Lobbies • Entryways • Campus emergency stations • Roadside emergency stations • Stadiums • Convention centers AApppplliiccaattiioonnss ? Need More Information on EWP? Call (715) 386-4345 and select 859. CAUTION - When installing on an analog extension of a phone system: Some phone systems do not conform to analog telecom standards and might not be compatible with the 1600A Series emergency phones. For a detailed description of the telephone line specifications required for any of the 1600A Series phones, retrieve Fax Back Document 869. E-1600-55A

grammed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile E2 memory. All units are phone line powered, requiring no batteries or external power and are compatible with common Central Station Monitoring equipment. For outdoor or harsh environments, select 1600A Series phones are available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, hand soldered silicon sealed connections, gel-filled butt connectors, as well as ure- thane potted circuit boards with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming. The 1600A Series ADA Compliant Emergency Phones are designed to provide quick and reliable handsfree communi- cation for any standard analog telephone line or analog phone system station port. All 1600A Series phones meet ADA requirements for elevator/ emer- gency telephones, and can be programmed from any Touch Tone phone. The phones can dial up to 5 programmable emergency numbers, as well as 2 central station numbers. In addi- tion, the E-1600-20A and E-1600-52A feature a second "INFO" button that will dial up to 3 non-emergency numbers. The 1600A Series phones can be pro- 1600A Series 1600A Series ADA Compliant Emergency Phones January 5, 2009 ADA* Compliant Emergency Phones with Built-In Digital Voice Announcer • Meets ADA requirements for Emergency Phones: - Can automatically light the “Call Connected” LED for the hearing impaired - Transmits a unique location I.D. code or voice announcement - Grade 2 Braille label for the visually impaired • Non-volatile digital voice announcer with 16 seconds of voice memory • Advanced call progress detection • Handsfree operation • Phone line powered • Non-volatile memory (no batteries required) • Touch Tone or pulse dialing • Dials up to 5 emergency numbers • E-1600-20A and E-1600-52A dial up to 3 non-emergency “INFO” numbers • Cycles through backup emergency and non-emergency numbers on busy or no-answer • Optional Enhanced Weather Protection (EWP) • Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command • Programmable to auto-answer on incoming calls • Remotely programmable • Extended temperature range (-15°F to 130°F) • 9 different chassis or board only available • Available in a 42” tall tower phone model E-1600A-BLT-EWP • Central Station Monitoring capability (dials 2 numbers) • Separate central station voice speed dial number • Optional PB-100 Polling System available • Optional BLK-3-EWP strobe light kit available PPrraaccttiiccee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY TECHNICAL TECHNICAL FFeeaattuurreess E-1600-45A K-1600-EHFA E-1600A E-1600-02A E-1600-03B E-1600-20A Power: Telephone line powered. Minimum 24V DC talk battery voltage, with a minimum loop current of 20mA loop. Loop current may be boosted on low current lines with a Viking Model TBB-1A talk battery booster (Fax Back # 630). Dimensions: See Installation and Specifications Operating Temperature: -26° C to 54° C (-15° F to 130° F) Humidity - Standard Products: 5% to 95% non-condensing Humidity - EWP Products: Up to 100% SSppeecciiffiiccaattiioonnss * Americans with Disabilities Act of 1992 contains federal reg- ulations regarding elevator telephones (Public Law 101-336). • Elevators • Parking ramps/lots • ATM machines • Area of refuge locations • Lobbies • Entryways • Campus emergency stations • Roadside emergency stations • Stadiums • Convention centers AApppplliiccaattiioonnss ? Need More Information on EWP? Call (715) 386-4345 and select 859. CAUTION - When installing on an analog extension of a phone system: Some phone systems do not conform to analog telecom standards and might not be compatible with the 1600A Series emergency phones. For a detailed description of the telephone line specifications required for any of the 1600A Series phones, retrieve Fax Back Document 869. E-1600-55A E-1600-30A E-1600-60A

APPLICATION APPLICATION NNoottee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY EWP EWP Enhanced Weather Protection March 3, 2004 Standard practice for manufacturing emergency phones is to provide them with standard uncoated circuit boards (like the ones in your PC). A few man- ufacturers, including Viking, spray the circuit boards with a water resistant material such as acrylic conformed coating to protect them. Some emergency phone applications demand extra protection. Phones that are mounted outside exposed to the elements in salty air near the ocean, in high humidity, exposed to a corrosive atmosphere or vehicle exhaust all need an extra measure of weather and corrosion resistance. Our EWP (Enhanced Weather Protection) phones are designed with total reliability in mind. First, we use weather-sealed push button switches, trim pots and DIP switches so FFeeaattuurreess • Urethane potting for: - Maintaining flexibilty at low temperatures - Excellent electrical insulation - Low stress on sensative componenants - Unaffected by moisture at high temperatures - Thermal cycling ability - Hydrolytic stability - No shrinkage • Sealed switch, LED, trim pots, push button and microphone connections • All wires are hand soldered • Mylar speaker with special weather-proof boot • Field adjustable trim pots and DIP switches • Closed cell foam gasketing to prevent water penetration • Weatherproof connectors filled with anti-corosive sealing gel PPhhoonnee......771155..338866..88886611 Enhanced Weather Protection Now Available on Selected Viking Products you can adjust microphone and speaker volumes and set program- ming features right at the installation site. Then, we hand solder all wires to eliminate the kind of corrosion that can occur in ordinary electrical connectors. We also hand seal the connections at the push button switch, microphone, and "Call Connected" LED using a special non-corrosive silicone sealant. We use a special microphone boot that acts as a shield against water penetration. A mylar speaker is used with rubber mounting gasket. Closed cell foam gasketing is used behind front panels to prevent water penetration. Finally we "Pot" the entire board in a clear flexible urethane encapsulating material leaving the weather sealed field- adjustable trim pots and DIP switches accessible. Our flexible polyurethane sealant allows the circuit board and it’s components to expand and contract, while maintaining weather resistance. To protect tip and ring connections, we include connectors filled with anti-corrosive sealing gel. Model BLK-3-EWP E-10/20A-EWP E-1600A-EWP E-1600-03A-EWP E-1600-20A-EWP E-1600-45A-EWP E-1600-50A-EWP E-1600-52A-EWP E-1600-55A-EWP E-1600A-BLT-EWP E-30-EWP K-1700-3-EWP W-1000/2000A-EWP W-3000-EWP Fax Back # 653 210 215 215 215 215 215 215 215 217 212 157 170 180 Description Line Status Strobe Light Kit Speaker Phones ADA Compliant Handsfree Emergency Phone ADA Compliant Handsfree Emergency Phone ADA Compliant Handsfree Emergency Phone ADA Compliant Handsfree Emergency Phone ADA Compliant Emergency Phone Kit ADA Compliant Emergency Phone Kit Univeral Emergency Phone Kit Emergency Tower Phone with Strobe Light Stainless Steel Handsfree Phone Stainless Steel Handsfree Phone with Keypad Handsfree Doorboxes Vandal-Resistant Stainless Steel Doorbox AApppplliiccaattiioonnss • Exposure to harsh elements (outdoor emergency phones) • Exposure to a salty atmoshere near the ocean (beach, board- walk or lifeguard emergency phones) • High-humidity environments (tropical environments and areas where it gets very hot and humid) • Corrosive-atmosphere environments • High-pollution environments • High-vehicle exhaust environments (roadside assistance and emergency phones)

APPLICATION APPLICATION NNoottee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY Pool Area Emergency Phones December 5, 2002 A swimming pool is fun and relaxing for the whole family, but it brings a variety of safety concerns to atten- tion. Many states require pool areas to have two-way voice communication sys- tems. This ensures that in the event of an emergency, assistance is only a push of a but- ton away! Viking emergency phones offer cost- effective, easy solutions for your poolside safety concerns. All 1600A Series phones meet ADA requirements for elevator/emergency telephones. The phones can dial up to 5 emergency numbers (of your choice), as well as 2 central station numbers if Central Station Monitoring is used. For outdoor or harsh environments, select 1600A Series phones are available with Enhanced Weather Protection (EWP). EWP products are ideal for swimming pool areas - where heat and humidity are always an issue! Every EWP product features rubber gaskets and boots, hand soldered silicon sealed connections, gel-filled butt connectors, as well as urethane potted circuit boards with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming. Poolside Emergency Phones Can Help Save Lives! PPhhoonnee......771155..338866..88886611 hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom m E-1600-45A K-1600-EHFA E-1600A E-1600-02A E-1600-03A E-1600-20A E-1600-55A • Meets ADA requirements for Emergency Phones • Digital voice announcer with 16 seconds of memory • Advanced call progress detection • Handsfree operation • Phone line powered • Non-volatile memory (no batteries required) • Touch Tone or pulse dialing • Dials up to 5 emergency numbers • Cycles through backup emergency numbers on busy or no-answer • Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command • Programmable to auto-answer on incoming calls • Locally or remotely programmable • Extended temperature range (-15°F to 130°F) • Central Station Monitoring capability • Separate central station voice speed dial number 11660000AA FFeeaattuurreess

Emergency PPhones aand the Americans with Disabilities AAct ((ADA) In PPlain EEnglish Telecom & Security Solutions for the 21st Century! Emergency PPhones aand the Americans with Disabilities AAct ((ADA) In PPlain EEnglish Telecom & Security Solutions for the 21st Century! VIKING Electronics, Inc. VIKING Electronics, Inc. Manufacturer of a wide variety of ADA-Compliant Emergency Phones to fit almost any application and a full line of money-saving components. Phone: ((715) 3386-88861 E-m mail: [email protected] Web: wwww.vikingelectronics.com E-11600-003B E-11600-220A E-11600-555A K-11600-EEHFA E-11600-550A E-11600A-BBLT-EEWP E-11600A E-11600-445A E-11600-002A

APPLICATION APPLICATION NNoottee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY Note: This document must be used in combina- tion with the 1600A Series Technical Practice (Fax Back Document 215). The 1600A Series emergency telephones have the capability to communicate directly with several central station receiver formats. In this mode, the emergency phone will automatically relay vital information to compatible equipment at central alarm moni- toring stations. PPrrooggrraam mm miinngg 1600A Series 1600A Series Central Station Monitoring August 28, 2001 Using the 1600A Series Phones with Central Station Equipment Once the receiver has issued the proper acknowledgement tone, the “CALL CONNECTED” indicator on the front of the emergency phone will light, and the 1600A phone will then switch to two-way voice or call a voice line. The 1600A Series emergency phone may NOT be compatible with certain Central Station Monitoring equipment. If you experience problems, contact Product Support at 715-386-8666. ! The standard 1600A emergency phone is factory programmed to communicate using the “Ademco Contact I.D.”, “Ademco High Speed”, “DTMF 4+1 Express”, or the “DTMF 4+2 Express” formats. All formats use the programming memory loca- tion #20 to store the account code and alarm details. 1. Accessing the Programming Mode Before programming, you must access the programming mode (see 1600A Technical Practice, section A). 2. Enabling/Disabling Central Station Mode The 1600A Series emergency phone can be placed in the “Central Station Mode” by entering a central station phone number in position #05 while programming. To cancel the “Central Station Mode,” clear position #05 by entering #05 (see 1600A Technical Practice, section F). 3. Ring Delay When the 1600A Series emergency phone is in the “Central Station Mode”, it is best to have the ring delay set to a minimum of three. Some receivers send a long tone after answering the line that sounds like a ring back, and if the 1600A is set to a ring delay of two, the phone will disconnect (see 1600A Technical Practice, section F). 4. Speed Dial Numbers The 1600A Series phone can be programmed to dial a central station receiver only, or dial up to 5 voice numbers first, and if no answer, then dial the central station receiver. When calling the first numbers (memory positions #00- #04, see 1600A Technical Practice, section C), the phone stays in “two-way talk mode” allowing two-way conver- sation. When calling the Central Station number (memory position #05), the phone is in a “listen only mode” in order to interpret the hand shake signal of the receiver. A second central station number position has been provided in location #06 that is used when the central station receiver does not have a talk over mode. If a number is placed in position #05 and position #06 is cleared, the operation is as follows: the E-1600A will call the central station monitor receiver first. After the receiver sends a kiss-off, the E-1600A lights the “Call Connected” LED and goes into two-way talk mode. A. Programming Features E-1600-45A K-1600-EHFA E-1600A E-1600-02A E-1600-03A E-1600-20A

APPLICATION APPLICATION NNoottee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY Pool Area Emergency Phones May 8, 2007 A swimming pool is fun and relaxing for the whole family, but it brings a variety of safe- ty concerns to attention. Many states require pool areas to have two-way voice communication sys- tems. This ensures that in the event of an emergency, assistance is only a push of a button away! Viking emergency phones offer cost- effective, easy solutions for your poolside safety concerns. All 1600A Series phones meet ADA requirements for elevator/emer- gency telephones. The phones can dial up to 5 emergency numbers (of your choice), as well as 2 central station numbers if Central Station Monitoring is used. For outdoor or harsh environments, select 1600A Series phones are available with Enhanced Weather Protection (EWP). EWP products are ideal for swimming pool areas - where heat and humidity are always an issue! Every EWP product features rubber gaskets and boots, hand soldered silicon sealed connections, gel-filled butt con- nectors, as well as urethane potted circuit boards with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming. Poolside Emergency Phones Can Help Save Lives! PPhhoonnee......771155..338866..88886611 hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom m • Meets ADA requirements for Emergency Phones • Digital voice announcer with 16 seconds of memory • Advanced call progress detection • Handsfree operation • Phone line powered • Non-volatile memory (no batteries required) • Touch Tone or pulse dialing • Dials up to 5 emergency numbers • Cycles through backup emergency numbers on busy or no-answer • Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command • Programmable to auto-answer on incoming calls • Locally or remotely programmable • Extended temperature range (-15°F to 130°F) • Central Station Monitoring capability • Separate central station voice speed dial number 11660000AA--EEW WPP FFeeaattuurreess E-1600-45A K-1600-EHFA E-1600A E-1600-02A E-1600-03B E-1600-20A E-1600-55A

The 1600A Series ADA Compliant Emergency Phones are designed to provide quick and reliable handsfree communication for any standard analog telephone line or analog phone system station port. All 1600A Series phones meet ADA requirements for elevator/ emergency telephones, and can be programmed from any Touch Tone phone. The phones can dial up to 5 programmable emergency numbers, as well as 2 central station numbers. In addition, the E-1600-20A and E-1600-52A fea- ture a second "INFO" button that will dial up to 3 non-emergency numbers. The 1600A Series phones can be programmed to automatically deliver a digital announcement to identify the location of the emer- gency call. Alternatively, a DTMF Touch Tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile E2 memo- ry. All units are phone line powered, requiring no batteries or external power and are compatible with common Central Station Monitoring equipment. For outdoor installations where the unit is exposed to precipitation or condensation, select 1600A Series phones are available with Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information, see DOD# 859. 1600A Series 1600A Series ADA Compliant Emergency Phones January 24, 2013 ADA* Compliant Emergency Phones with Built-In Digital Voice Announcer • Meets the latest ASME A17.1 code when used with the optional LV-1K Line Verification Panel, see DOD# 246 • Meets ADA requirements for Emergency Phones: - Can automatically light the “Call Connected” LED for the hearing impaired - Transmits a unique location I.D. code or voice announcement - Grade 2 Braille label for the visually impaired • Non-volatile digital voice announcer with 16 seconds of voice memory • Advanced call progress detection • Handsfree operation • Phone line powered • Non-volatile memory (no batteries required) • Marine grade 316 stainless steel prevents corrosion on stainless models • Dials up to 5 emergency numbers • E-1600-20A and E-1600-52A dial up to 3 non-emergency “INFO” numbers • Cycles through backup emergency and non-emergency numbers on busy or no-answer • Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859 • Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command • Programmable to auto-answer on incoming calls • Remotely programmable • Extended temperature range (-15°F to 130°F) • 9 different chassis or board only available • Available in 42” tall tower phone model E-1600A-BLT-EWP (DOD# 217) • Central Station Monitoring capability (dials 2 numbers) • Optional PB-100 Polling System available (DOD# 232) • Optional BLK-3-EWP strobe light kit available (DOD# 653) • Optional LC-6 Six Port Concentrator available (DOD# 245) • Optional LV-1K Line Verification Panel available (DOD# 246) PPrraaccttiiccee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY TECHNICAL TECHNICAL FFeeaattuurreess E-1600-45A K-1600-EHFA E-1600A E-1600-02A E-1600-03B E-1600-20A Power: Telephone line powered. Minimum 24V DC talk battery voltage, with a minimum loop current of 20mA loop. Loop current may be boosted on low current lines with a Viking Model TBB-1B talk battery booster, see DOD# 632. Dimensions: See Installation and Specifications Operating Temperature: -26° C to 54° C (-15° F to 130° F) Humidity - Standard Products: 5% to 95% non-condensing Humidity - EWP Products: Up to 100% SSppeecciiffiiccaattiioonnss * Americans with Disabilities Act of 1992 contains federal reg- ulations regarding elevator telephones (Public Law 101-336). • Elevators • Parking ramps/lots • ATM machines • Area of refuge locations • Lobbies • Entryways • Campus emergency stations • Roadside emergency stations • Stadiums • Convention centers AApppplliiccaattiioonnss CAUTION - When installing on an analog extension of a phone system: Some phone systems do not conform to analog telecom standards and might not be compatible with the 1600A Series emergency phones. For a detailed description of the telephone line specifications required for any of the 1600A Series phones, see DOD# 869. E-1600-55A E-1600-30A E-1600-65A E-1600-60A

1600A Series 1600A Series ADA Compliant Emergency Phones September 10, 2015 ADA* Compliant Emergency Phones with Built-In Digital Voice Announcer • New Automatic Noise Canceling (ANC) feature for proper operation in noisy environments • Meets the latest ASME A17.1 code when used with the optional LV-1K Line Verification Panel, see DOD# 246 • Meets ADA requirements for Emergency Phones: - Automatically lights the “Call Connected” LED - Transmits a unique location I.D. code or voice announcement - Grade 2 Braille label for the visually impaired • Non-volatile digital voice announcer with 16 seconds of voice memory • Advanced call progress detection • Handsfree operation • Phone line powered • Non-volatile memory (no batteries required) • Marine grade 316 stainless steel prevents corrosion on stainless models • Dials up to 5 emergency numbers • E-1600-20A and E-1600-52A dial up to 3 non-emergency “INFO” #’s • Cycles through backup phone numbers on busy or no-answer • Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859 • Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command • Programmable to auto-answer on incoming calls • Remotely programmable • Extended temperature range (-15°F to 130°F) • 9 different chassis or board only available • Available in 42” tall tower phone model E-1600A-BLT-EWP (DOD# 217) • Central Station Monitoring capability (dials 2 numbers) • Optional PB-100 Polling System available (DOD# 232) • Optional BLK-3-EWP strobe light kit available (DOD# 653) • Optional LC-6 Six Port Concentrator available (DOD# 245) • Optional LV-1K Line Verification Panel available (DOD# 246) • Optional E-1600A-MK-GNP Pedestal Mounting Kit (DOD# 227) • Optional PB-1 Panic Button Kit (DOD# 233) PPrraaccttiiccee TTEELLEECCO OM M SSO OLLUUTTIIO ONNSS FFO ORR TTHHEE 2211SSTT CCEENNTTUURRYY TECHNICAL TECHNICAL FFeeaattuurreess E-1600-45A K-1600-EHFA E-1600A E-1600-02A E-1600-03B E-1600-20A Power: Telephone line powered. Minimum 24V DC talk battery voltage, with a minimum loop current of 20mA loop. Loop current may be boosted on low current lines with a Viking Model TBB-1B talk battery booster, see DOD# 632. Dimensions: See Installation and Specifications Operating Temperature: -26° C to 54° C (-15° F to 130° F) Humidity - Standard Products: 5% to 95% non-condensing Humidity - EWP Products: Up to 100% SSppeecciiffiiccaattiioonnss * Americans with Disabilities Act of 1992 contains federal reg- ulations regarding elevator telephones (Public Law 101-336). • Elevators • Parking ramps/lots • Emergency pool phones • ATM machines • Area of refuge locations • Lobbies • Entryways • Campus emergency stations • Roadside emergency stations • Stadiums • Convention centers • Silent holdup alarm dialer using optional Panic Button Kit AApppplliiccaattiioonnss CAUTION - When installing on an analog extension of a phone system: Some phone systems do not conform to analog telecom standards and might not be compatible with the 1600A Series emergency phones. For a detailed description of the telephone line specifications required for any of the 1600A Series phones, see DOD# 869. E-1600-55A E-1600-30A E-1600-65A E-1600-60A The 1600A Series ADA Compliant Emergency Phones are designed to provide quick and reliable handsfree communication for any stan- dard analog telephone line or analog phone system station port. All 1600A Series phones meet ADA requirements for elevator/ emer- gency telephones, and can be programmed from any Touch Tone phone. The phones can dial up to 5 programmable emergency num- bers, as well as 2 central station num- bers. In addition, the E-1600-20A and E-1600-52A feature a second "INFO" button that will dial up to 3 non-emer- gency numbers. The 1600A Series phones can be pro- grammed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile E2 memory. All units are phone line powered, requiring no batteries or external power and are compatible with common Central Station Monitoring equipment. For outdoor installations where the unit is exposed to precipitation or condensation, select 1600A Series phones are available with Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information, see DOD# 859.