Voda Plumbingware Proline VPLNSC1 Manuals

9 421027 594951 Voda Plumbingware (NZ) Ltd | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz Proline 15mm Shower Taps VPLNSC1 Congratulations on your purchase of this high quality product from Voda Plumbingware. Please read the following before installation and retain (along with your receipt) for future reference. TECHNICAL SPECIFICATIONS Suitable for All Pressures Minimum Pressure = 17kPa Maximum operating Pressure = 500kPa Maximum operating Temperature = 65 deg. Celsius For domestic use only. CONFIGURATION Mains Pressure systems Install as supplied. Unequal Low systems Install as supplied. Equal Low systems Install as supplied. INSTALLATION For pressures exceeding 500kPa, install a pressure reducing valve. Failure to do so will void the warranty. • Before commencing installation, turn off the water supply. • Remove the indicator and screw. Remove handle. • Remove the flange and mounting washer. • Fit the manifold to wall recess, ensuring all brackets are secured (i.e. tap bodies). • Connect inlets to plumbing with either Crox or compression fittings. • Make sure to have 10mm thread protruding when the wall lining is installed. • Screw on the headworks (jumper should be attached), then the flanges, then the handles. • Screw on the handles. Tighten handle using the screw and finally put on the indicator. • Turn on the water supply. • Check for leaks. Indicator Screw Flange Headworks Body Outlet