Voelker S 960-2 Manuals

Quick reference guide for hospital bed model S 960 Quick reference guide for hospital bed model S 960 Quick reference guide for hospital bed model S 960 Quick reference guide for hospital bed model S 960----2222 Völker AG • Wullener Feld 79 • 58454 Witten - Germany phone + 49-2302-960 960 • fax + 49-2302-960 96 16 www.voelker.de • [email protected] KA72 A. Side rails A. Side rails A. Side rails A. Side rails To raise a side rail section, To raise a side rail section, To raise a side rail section, To raise a side rail section, pull section horizontally out of its location to end-stop and fold it upwards. In order to adjust the height of the side rail, pull the telescopic part up to the stop. B. Hand control B. Hand control B. Hand control B. Hand control back section up back section up back section up back section up upper leg section up upper leg section up upper leg section up upper leg section up Anti Anti Anti Anti ----Trendelenburg Trendelenburg Trendelenburg Trendelenburg (Activation / Deactivation) height adjustment up height adjustment up height adjustment up height adjustment up back section down back section down back section down back section down upper leg section down upper leg section down upper leg section down upper leg section down Auto Auto Auto Auto –––– Contour (optional) Contour (optional) Contour (optional) Contour (optional) (back- & upper leg section move upwards at the same time) height adjustment down height adjustment down height adjustment down height adjustment down To lower a side rail section completely, To lower a side rail section completely, To lower a side rail section completely, To lower a side rail section completely, 1. Press the two buttons on the inner side of the frame, right above the cross- member, so that the height-adjustable side rail section can be put into its lowest position. 2. Operate the (2a) release button labelled “Push” at the bottom of the side rail part and (2b) tilt it horizontally to the side so that it runs parallel to the floor. 3. Push the side rail completely under the lying surface. 1 2(a) 2(b) 3