VXI VoxStar Manuals

IMPORTANT: CHARGE HEADSET FULLY PRIOR TO FIRST USE IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid injury, set the volume to the lowest comfortable level. If you experience ringing in your ears, or voices sound muffled, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s possible for your ears to adapt to volume that is too high, and this could result in permanent hearing damage without any noticeable discomfort. Package Contents 1. VoxStar™ Headset with Ear Hook 2. Cheek Pad 3. Foam Ear Cushion 4. Rubber Ear Cushion 5. Contoured Ear Buds (1 small, 1 medium, and 1 large) 6. Ear Bud Adapter Ring 7. USB Charging Cable** 8. Auto Adapter** 9. Quick-Start Guide** VXi VoxStar ™ Quick-Start Guide B C 2 4 A 3 6 E D 1 5 Features and Functions A. Indicator Lights B. Multifunction Button (MFB) C. Flexible Microphone Boom D. Volume Down E. Volume Up/Mute **Not pictured. Wearing Styles To get the best performance from our noise-canceling technology, position the microphone near the corner of your mouth. Positioning is important; small adjustments in microphone placement can improve performance. To attach the headset to the wearing style of your choice, please refer to the following photos. Charging Connect charger cord into the headset’s charging port. The headset LED will illuminate red when charging and blue when fully charged. Turning Headset On/Off Turn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear a voice prompt, “Power on.” The blue light will flash twice every second. Turn Headset Off: Hold down the MFB for approximately 3-4 seconds until you hear a voice prompt, “Power off.” A red light will flash 4 times and the headset will turn off. Placing Headset into Pairing Mode With VoxStar powered off, press the MFB until the light rapidly flashes blue and you hear the audio prompt “Power On.” Keep holding the MFB for approximately 10 seconds until you hear “Discovering.” Headset will be visible for pairing to devices for 120 seconds. Pairing to a Cell Phone 1) Make sure that other Bluetooth devices are turned off or out of range. 2) Place VoxStar into pairing mode. 3) Put your cellphone in Bluetooth Search/Scan Mode per the manufacturer’s instructions. 4) Select “VXi VoxStar” to pair. (Passcode is “0000” if needed.) 5) When connected, VoxStar will give you the voice prompt, “Your headset is connected.” Multi-Point Mode Multi-point mode enables the VoxStar to be simultaneously paired and connected to two cell phones. The headset will automatically switch between phones when there is an incoming call. To enable Multi-point: 1) Make sure that all Bluetooth devices are turned off or out of range. 2) Power on VoxStar, but do not place in Pairing Mode. It should not be connected to any device. 3) Press, and then immediately release all three buttons (MFB, Volume Up, Volume Down) at the same time. If successful, you should hear a four note rising tone. Earhook Optional cheek pad goes here Ear Bud Assembly Function Power On Power Off Enable Pairing Mode Volume Up Volume Down Mute (On/Off) Answer a Call/Active Call End a Call Transfer Audio Low Battery Button/Duration of Press MFB (2-3 seconds) MFB (3-4 seconds) MFB (5-15 seconds) Volume Up (quick press) Volume Down (quick press) Volume Up (2 seconds) MFB (quick press) MFB (quick press) Volume Down (1-2 seconds) n/a LED Indicator Blue, double flash (1 second) All LEDs turn off Blue, rapid flash NONE NONE NONE Blue flash, once per second Blue flash, every 4 seconds NONE Red, fast flash Quick-Reference Tables Function Power On Power Off Enable Pairing Mode Volume Up Volume Down Mute (On/Off) Answer a Call/Active Call End a Call Transfer Audio Low Battery Audio Indicator Short tone NONE NONE Single tone Single tone Single tone, reminder tone every 10 seconds Two rising tones Two falling tones NONE Long, high tone @ 20 seconds Voice Indicator “Power on” “Power off” “Discovering” NONE NONE NONE NONE “Call terminated” NONE “Battery low” Multiple Device Pairing and Advanced Features The VXi VoxStar can pair with up to eight (8) devices. However, only one device may be connected to the headset at a time, unless the headset is in Multipoint Mode. For more information on advanced features, please refer to the complete user guide, available online. For the full user guide, technical notes, and available accessories, go to www.vxicorp.com. 271 Locust Street | Dover, NH 03820 | Toll-free: 800-742-8588 | Phone: 603-742-2888 © 2013 VXi Corporation. APN 203334B 12/13 www.vxicorp.com

VXi VoxStar ™ User Guide Compatible with most Bluetooth® phones and Bluetooth enabled-computers (Windows® or Macintosh®)