Watchguard Firebox SSL Core Manuals

Firebox® SSL Core Hardware Guide Firebox® SSL VPN Gateway

1 Hard Drive Installation Instructions Firebox X® Core™ and Firebox® SSL Core Installing the Hard Drive Read all instructions before beginning the installation procedure. If you purchased the hard drive as an upgrade option, keep a copy of your reseller invoice for the hard drive upgrade. You must supply this proof of purchase to WatchGuard with any warranty claims. 1 Turn off the Firebox. CAUTION The hard drive is not a hot swap device. Failure to turn the Firebox off before installing the hard drive can result in damage to the hard drive. 2 On the front right side of the Firebox, look for the door covering the hard drive slot. 3 Lift the door and find the two release tabs for the hard drive tray. System Requirement Hardware The hard drive will only operate on a Firebox®X Core™ model X700, X1000, X2500, or Firebox®SSL Core. The hard drive upgrade will not operate on a Firebox X500. To use the hard drive on a Firebox X500, you must first purchase a Firebox model upgrade. Appliance Software The Firebox® must have an approved version of appliance software installed. For Firebox®SSL Core, the appliance software is included on the hard drive. To make sure your Firebox has the most current approved version of appliance software, refer to http://www.watchguard.com/help/docs/ firebox_hdd_install.asp. Environment The hard drive is not a hot swap device. The Firebox®must be turned off during the procedure.