Wayne Scott Joness RC-1324 v2 Manuals

RC-1324 v2 13 to 24 Pin Bus Converter OWNER’S MANUAL _______________________________________ DESCRIPTION The RC-1324 is a unique processor designed to convert modern, 13-pin Roland guitar synthesizer signals to the 24-pin format used by vintage Roland and Roland-compatible guitar synthesizers. Because the vintage Roland guitars featured more controls than modern systems, the RC- 1324’s control panel recreates all the vital controls for a vintage system. In addition, the RC-1324 has its own built-in hex fuzz generator, with a separate hex fuzz output. To replace the LFO touch pads on a vintage guitar controller, the RC-1324 has a CV pedal input on the back for hands-free control over vibrato/LFO depth. Please read this owner’s manual carefully before using the RC-1324. The RC-1324 incorporates circuitry and concepts designed by Mark Smart. _______________________________________ IMPORTANT NOTES • When connecting a guitar and synthesizer to the RC-1324, be sure that power to the synthesizer(s) is switched off. • The 13-pin connector used with the RC- 1324 is a locking style connector, and therefore cables cannot be disconnected unless the locking pin is released. • Using the 1/4” output on the guitar while at the same time using the 13-pin output may create a ground loop or signal hum.