WhatsGPS S06U Manuals

Model:S06U User Manual 2G Vehicle GPS Tracker Installation instructions S06U - 1 Power line - 1 Relay - 1 Microphone - 1 SOS line - 1 User manual - 1 1) Wiring instructions 1. Accessories list 2. Installation instructions 2.1 SIM card installation Confirm whether the accessories are complete before using , including: Open the face shell according to the instructions in figure 1 and load the SIM card. The device USES the SIM card of standard specification. The device has three sets of interfaces, interface 1 for microphone connection, interface 2 for power supply connection, and ACC detection and relay. Interface 3 is used to connect the SOS keys. Interface 2 is a 4-core wire, which are relay wire (yellow), power positive pole (red), power negative pole (black), and ACC detection wire (green). Notes for wiring Interface description 1. The power supply range supported by the equipment is 6-30v, please use the power cord provided by the original factory. The red wire is the positive pole and the black wire is the negative pole. When installing the negative pole of the power supply, please choose separate grounding or connecting the iron. 1) ACC line (green line) is connected to the ACC switch of the vehicle, and ACC line is used for starting/flameout status detection of the vehicle. 2) The coil ends of the relay are respectively thin white line (85) and thin yellow line (86), the thin white line is connected to the positive of the automobile power supply (+12V), and the thin yellow line is connected to Port 1：Micphone Port 2： Power/ACC/Relay Port 3：SOS botton Port 1 Port 2 Port 3