Whittier Wood 3524DUETa Manuals

P.O. Box 2827 Eugene, OR 97402 USA Production Code: VN 08/18 Model # 3524DUETa Addison Lift-Top Coffee Table Duet finish Assembly Instructions IMPORTANT NOTES:  Wood can be susceptible to changing color over time when exposed to strong sunlight. Use window shades, drapes or blinds to protect your furniture. To help the surface age evenly and avoid dark and light spots, periodically move items to expose the entire surface to an even amount of light so it may develop a uniform patina.  For normal household use only. Not recommended for commercial use.  Do not climb, sit or stand on this piece of furniture.  Unload items before you move this unit.  Do not overload the drawers.  This assembly requires two people. WARNING Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the state of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to: www.p65warnings.ca.gov/wood This product can expose you to chemicals, including formaldehyde, which are known to the State of California to cause cancer. For more information go to: www.p65warnings.ca.gov/furniture DESIGN SUBJECT TO CHANGE WITHOUT NOTICE. CUSTOMER SERVICE If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you cannot order replacement parts through your dealer, please contact our customer service department. Hours: Our friendly customer service staff can be reached: Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time). You may leave a message 24 hours a day, seven days a week. Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213 Fax: 541-687-2060• Email: [email protected] Thank you for allowing us to help you furnish your home. We are certain you will be delighted with your new furniture for many years to come. 3524DUETa Addison Lift-Top Coffee Table Parts List 3524DUETa — Page 2 — 08/18 Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and part name. Part Description Quantity A Top Assembly (attached) 1 Ba Case Assembly 1 C Drawer (inserted) 2 D Drawer Face (installed) 2 E Tray Assembly (attached) 1 F Base (attached) 1 G 16" Drawer Slide (installed sets) 2 H #6 x 3/4" Philtruss Screw (inserted) 28 I #6 x 1/2" Philtruss Screw (inserted) 12 J #8 x 1-1/8" Lo-Profile Screw (inserted) 12 K #8 x 1-1/4" Pan Head Screw (inserted) 32 L #8 x 7/8" Black Lo-Profile Screw (inserted) 8 M #8 x 1-3/4" Pan Head Screw (inserted) 14 N #8 x 1-5/8" Black Screw (inserted) 19 O #8 x 1-5/8" Machine Screw Tuscan (installed) 4 P 1/4" x 20mm Insert Nut (inserted) 4 Q 5/32" x 10mm Insert Nut (inserted) 4 R Black Walnut Pull (attached) 2 S Velvet Pad 100 x 38mm (attached) 4 T Small Adjustable Glide (installed) 4 U Lift Up Mechanism (attached) 1 V Short Spring (installed) 2 3524DUETa Addison Lift-Top Coffee Table Assembly Instructions 3524DUETa — Page 3 — 08/18 Tool Required: Phillips Screwdriver 1. Remove screws from the plywood supports and side aprons. Recycle or discard. See Figure 1. 2. Firmly hold the lift top closed and turn the table upright. Place the unit at its final destination. Rotate the Small Adjustable Glides (T) on the bottoms of the legs until the unit is level. See Figure 2. Continued on page 4 Fig. 2 T T Fig. 1 Plywood Supports 3524DUETa Addison Lift-Top Coffee Table Assembly Instructions 3524DUETa — Page 4 — 08/18 3. To remove the Drawers (C) from the Case (Ba), pull up on the left side of the Drawer Release Lever while pushing down on the right Drawer Release Lever. See Figure 3 and 3a. Note where each drawer came from to ensure correct installation. Fig. 3 Drawer Release Lever Fig. 3a