Windsor SCX264 Manuals

Read these instructions before using the machine Lea las instrucciones antes de utilizar la máquina MODELS: SCX264 SCXC264 BSCSCX264 10052380 10052430 10052860 SCX324 SCXC324 10052390 10052440 Operating Instructions (ENG) Instrucciones de funcionamiento (SPA) 86039080 - BP 01/24/13 PRV NO. 98964 WALK BEHIND SCRUBBER IPX4 MACHINE DATA LOG/OVERVIEW CUTTER 24V 86039080 05/04/11 2 For the name and address of your dealer contact: Windsor Industries YOUR DEALER Name: __________________________________________________________________________________________________ Address: _______________________________________________________________________________________________ Phone Number: _________________________________________________________________________________________ OVERVIEW The Saber Cutter is a battery powered, self-propelled, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with brushes or pads, and then vacuums the soiled water back into the recovery tank. MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ DEALER NAME ________________________________ OPERATIONS GUIDE NUMBER ___________________ PUBLISHED __________________________________________ Warranty Registration Thank you for purchasing a Windsor product. Warranty registration is quick and easy. Your registration will allow us to serve you better over the lifetime of the product. To register your product go to: www.windsorind.com/WarrantyRegistration.aspx For customer assistance: 1-800-444-7654 TABLE OF CONTENTS CUTTER 24V 86039080 04/17/07 3 Machine Data Log/Overview.........................2 Table of Contents..........................................3 HOW TO USE THIS MANUAL How to use this Manual.................................1-1 SAFETY Important Safety Instructions ........................2-1 Hazard Intensity Level. .................................2-2 Safety Label Location. ..................................2-3 OPERATIONS Technical Specifications. ..............................3-1 How the Machine Works...............................3-3 Components..................................................3-4 Controls.........................................................3-5 Machine Operation........................................3-9 Pre-Run Machine Inspection......................3-9 Starting Machine........................................3-9 Emergency Stop Procedures .....................3-9 Filling the Solution Tank.............................3-9 Scrubbing................................................ 3-10 Emptying & Cleaning Tanks.................... 3-11 MAINTENANCE Service Schedule.............................. ........ 4-1 Batteries........................................................4-3 Battery Maintenance..................................4-3 Checking Battery Specific Gravity..............4-4 Charging the Batteries. ..............................4-4 Changing Batteries. ...................................4-5 Battery Connections...................................4-5 Squeegee Blades..........................................4-6 Adjusting Squeegee......................................4-6 Replace or Rotate Rear Squeegee Blade.. ..4-6 Replace or Rotate Front Squeegee Blade. ..4-6 Adjusting Squeegee Pitch................. ........ ..4-7 Adjusting Rear Deflection. ................ ........ ..4-7 Replacing Aqua-Mizer Squeege Blades .......4-7 Scrub Brushes. .............................................4-8 Types. ........................................................4-8 Replacing or Installing Scrub Brushes .......4-8 Float Shut-Off................................................4-8 Solution Strainer ...........................................4-9 Brush Motor Replacement ............................4-9 Traction Motor Brush Replacement.. .........4-10 Circuit Breaker.................................. .........4-10 Brush Shrouds & Brush Skirts .......... .........4-10 Vacuum Motors................................. .........4-11 Actuator Scrub Deck......................... .........4-12 Greasing Axles ................................. .........4-13 Machine Troubleshooting ................. .........4-14 GROUP PARTS LIST Control Handle............................................ 5-1 Cover (Front) & Tank Mount....................... 5-3 Cover (Top) & Tank Mount ......................... 5-5 Decal........................................................... 5-7 Electrical Panel........................................... 5-9 Lift Handle................................................... 5-11 Lift Handle Linkage..................................... 5-13 Recovery Tank............................................ 5-15 Scrub Brush/Pad Driver.............................. 5-17 Scrub Deck Aqua-Mizer-26in Scrubhead ... 5-19 Scrub Deck Aqua-Mizer-32in Scrubhead ... 5-21 Scrub Deck Motors ..................................... 5-23 Scrub Deck Skirt-26in Scrubhead............... 5-25 Scrub Deck Skirt-32in Scrubhead............... 5-27 Scrub Deck Lift Linkage-26in Scrub Deck .. 5-29 Scrub Deck Lift Linkage-32in Scrub Deck .. 5-31 Scrub Deck Lift ........................................... 5-33 Solution....................................................... 5-37 Squeegee-26in Scrubhead......................... 5-41 Squeegee-32in Scrubhead......................... 5-43 Squeegee Lift Linkage (Lower)................... 5-45 Vacuum....................................................... 5-47 Wheels & Frame......................................... 5-49 Wiring-Battery............................................. 5-51 Wiring-Control Panel................................... 5-53 Wiring-Main Harness .................................. 5-55 Wiring-Schematic-SCX264, SCX324.......... 5-57 Wiring-Schematic-SCXC264, SCXC324 .... 5-58 Brake-Option............................................... 5-59 Emergency Stop-Option ............................. 5-61 Accessory Pump-Option............................. 5-63 Battery Charger- SCXC264, SCXC324 ...... 5-65 Suggested Spare Parts............................... 5-67 EC Declaration of Conformity ..................... 5-68 Warranty ..................................................... 5-70 HOW TO USE THIS MANUAL CUTTER 24V 86039080 04/17/07 1-1 This manual contains the following sections: - HOW TO USE THIS MANUAL - SAFETY - OPERATIONS - MAINTENANCE - PARTS LIST The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts. Parts may be ordered from authorized Windsor dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual. The model and serial number of your machine is on the back panel of the machine. The SAFETY section contains important information regarding hazard or unsafe practices of the machine. Levels of hazards are identified that could result in product or personal injury, or severe injury resulting in death. The OPERATIONS section is to familiarize the operator with the operation and function of the machine. The MAINTENANCE section contains preventive maintenance to keep the machine and its components in good working condition. They are listed in this general order: - Batteries - Scrub Brushes - Adjusting Squeegee - Scrub Deck Skirt - Squeegee Blade/Brush Head Options - Service Schedule The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information: - REF – column refers to the reference number on the parts illustration. - PART NO. – column lists the part number for the part. - PRV NO. – reference number. - QTY – column lists the quantity of the part used in that area of the machine. - DESCRIPTION – column is a brief description of the part. - SERIAL NO. FROM – column indicates the first machine the part number is applicable to. When the machine design has changed, this column will indicate serial number of applicable machine. The main illustration shows the most current design of the machine. The boxed illustrations show older designs. If column has an asterisk (*), call manufacturer for a serial number. - NOTES – column for information not noted by the other columns. NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts. MODEL _____________________________________ DATE OF PURCHASE ________________________ SERIAL NUMBER ____________________________ SALES REPRESENTATIVE # ___________________ DEALER NAME ______________________________ OPERATIONS GUIDE NUMBER __________________ PUBLISHED ________________________________ Copyright 2002 Windsor Industries, Printed in USA