Winmate E500 Series Manuals

E500 Series PDA Quick Start Guide v1.3 For the complete user manual and other helpful resources, go to www.winmate.com To change scanning settings 1) Open WDC application. 2) In Barcode Settings tap Trigger Settings. 3) Choose scan type and read time options. TRIGGER MODE OPTIONS Auto Scan – auto-scanning once the user leaves the WDC application. Multiple Scan – continuously scanning and reading multiple codes within the read time duration (2-9 sec) after pressing button. Continuing Scan (Default) – scanning only the single code within the read time duration (2-9 sec) after pressing button. To change the symbologies of barcode 1) Open WDC application. 2) Tap Barcode Setting. 3) Tap Barcode Preference. 4) Change the symbologies of barcodes. To add command with the output of barcode 1) Open WDC application. 2) In Barcode Settings tap Prefix / Suffix. 3) Enter special characters at the beginning (prefix) or end (suffix) of the scanned barcodes. 4) Tap Set to add to the data. To change scanning settings 1) Tear off protective film from the barcode. 2) Press power button located on the side and swipe up from bottom to unlock the screen. 3) Open Search application or other which can edit text. 4) Press button located on the side. 5) Scan the following barcode to check if your reader is working properly. Result will be displayed in Search application. To scan barcode Optimum scanning Code-39 3) Remove the Battery Pull the plastic strap on the battery, and then remove it. 6) Put back the Battery Reinsert the battery by latching the bottom first and then put it down. 7) Check the Sealing Security. 4) Insert SIM Card Insert the SIM card (with its gold contacts facing down and cut-off corner facing inside) all the way into the SIM card slot. 5) Insert Micro SD Card Open the SD card holder by pushing the metal cover backward and lift it. Put the Micro SD card into the socket, close the metal cover, and push forward till it locked. There's more here. • Keep your E500 updated, and find the latest PC software, user manual, online help and more at: http://www.winmate.com/DownCenter/DownLoadCenter.asp?Do wnType=2021 • Find more accessories for your E500 at: http://www.winmate.com/TabletPC/E500-Series.asp?showblock= Accessories Hot swap battery If your device has the hot swap feature, you can swap batteries without powering off your device. Note: When hot swapping the battery the system will enter suspend mode. Note: Don’t remove the battery for more than 30 seconds in hot swap mode or press the battery detector to avoid shutdown. Note: Please ensure your device is powered off before swapping SIM card. Note: Don’t remove the battery for more than 30 seconds in hot swap mode or press the battery detector to avoid shutdown.