WISEUP SHOP IDC100 Manuals

IDC100 User Guide I. Product Overview 1.Camera Lens 2.Microphone 3.USB Port 4.Red Indicator Light 5.Blue Indicator Light 6.Power/Video Recording Button 7.Reset Button 8.Camera/Audio Recording Button II. What’s in the Box -1× Spy Camera ID Card -1× USB Cable -1× Lanyard -1× Clip III. Operation >> Please make sure your camera battery is fully recharged before using. >> Please format the built-in memory card on your PC computer before using. 3.1. POWER ON/OFF 3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both the red and blue indicator lights will be illuminated, then the red one will be off while the blue one will stay illuminated, indicating the camera has entered into standby mode automatically. 3.1.2. Power off the camera by pressing the Power Button for 2 seconds again. The blue indicator light will be off, then the red indicator light will flash twice and turn off. [Note]: The camera will shut down automatically if it is in standby mode without any operation more than 1 minute. 3.2. VIDEO RECORDING 3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both the red and blue indicator lights will be illuminated, then the red one will be off while the blue one will stay illuminated, indicating the camera has entered into standby mode automatically. 3.2.2. Press the Video Recording Button once to record video. The blue indicator light will flash 3 times and then turn off. 3.2.3. Press the Video Recording Button once to stop recording video. The blue indicator light will stay illuminated, indicating the camera is back to standby mode. [Note]: 1). A video file will be generated and saved every 30 minutes automatically. 2). The camera can record video for 3 hours continuously on a full charge. 3). Video Resolution: 1280x960 Video Format: AVI 4). If the camera is in low battery, the red indicator lights will flash 4 times and the camera will shut down automatically, and the camera will save all the video files. 3.3. CAMERA/STILL PHOTOGRAPHY 3.3.1. Power on the camera by pressing the Power Button for 2 seconds. Both the red and blue indicator lights will be illuminated, then the red one will be off while the blue one will stay illuminated, indicating the camera has entered into standby mode automatically. 3.3.2. Press the Camera Button once to take a photo. The red indicator light will flash once and turn off every time you take a photo. 3.4. AUDIO RECORDING 3.4.1. Power on the camera by pressing the Power Button for 2 seconds. Both the red and blue indicator lights will be illuminated, then the red one will be off while the blue one will stay illuminated, indicating the camera has entered into standby mode automatically. 3.4.2. Press the Audio Recording Button for 2 seconds to record audio. The blue indicator light will be off, the red one will flash 4 times and then turn off. 3.4.3. Press the Audio Recording Button once to stop recording audio. The blue indicator light will stay illuminated, indicating the camera is back to standby mode. [Note]: 1). An audio file will be generated and saved every 30 minutes automatically. 2). Audio Format: WAV IV. Video/Image Files Uploads 4.1. Power off the camera and connect the camera to a proper PC computer USB port by using the USB cable provided.