Worcester danesmoor 12/14 Manuals

4 pdf manual(s) Worcester danesmoor 12/14 for free download (Document Types: Installation and servicing instructions, Installation and servicing instrucnions, User instructions & customer care manual)

Worcester danesmoor 12/14 Installation and servicing instructions [PDF] (28 pages)

  • Identifier: id-2077662
  • Brand: Worcester
  • Device: danesmoor 12/14 Boiler
  • Type: PDF
  • Key Aspects: Information on Regular Maintenance, Performance Optimization Tips, Basic Configuration Guidelines
  • UPD Date: 15.04.2026
  • Source File: 2210194.pdf
  • Pages: 28
  • Description: Setup and usage guide for the Worcester danesmoor 12/14.
Pages Preview:
  • 1.1 General installation information and advice may be obtained from the Oil Firing Technical Association for the Petroleum Industry (OFTEC). Training courses are also offered by OFTEC, leading to inclusion on their list of registered engineers. 1.2 The appliance should be installed by a competent person. The person installing the appliance should be aware of the Health and Safety at Work Act and take appropriate action to ensure that the regulations are a
  • 3 3. Technical Data re-setting the speed control knob. This is located on the pump electrical connection block. Three pump speeds are available, number 1 being the lowest. Expansion Vessel A 10 litre expansion vessel is included within the appliance cabinet. Pressure Gauge A 4 bar pressure gauge is included to allow the system pressure to be checked and set to the correct level. Pressure Relief Valve A 3 bar relief valve is fitted to protect the appliance
  • 4 * NOTE: For use on conventional flue only. ** NOTE: The flue gas temperature is measured in the gas sampling hole on the flue outlet plate. The probe should be inserted to a depth of 50mm and angled towards the flue outlet. The temperature measured is not an absolute flue gas temperature and is for general guidance purposes only! NOTE: The pump pressure given is for general guidance only as variations in nozzle output can be up to ± 15%. It is, therefor
  • 4.1 The appliance is not suitable for external installation unless a suitable enclosure is provided. 4.2 The appliance should be positioned on a non-combustible solid base as near to the flue location point as possible. Care should be taken to ensure that the appliance is level; use packing at the corners where necessary. 4.3 When fitting a LLD or RS model, the rear of the appliance must be positioned against an external wall such that the flue terminal c
  • 6 Fig. 2. Conventional Flue Appliance. (CF/LLD) Manual air vent Electrical top cover Manual reset overheat thermostat System pressure gauge Side panel Side panel locking screw (A) Burner seal gasket Burner locking screw Pressure relief valve Central heating flow Pump Burner Front panel Expansion vessel Electrical panel User operating switch (Optional programmer position) Top panel Thermostat knob Fire valve clip Manual reset over- heat thermostat phial Aut
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DANESMOOR SYSTEM BOILER CONVENTIONAL FLUE AND ROOM SEALED BF FLOOR STANDING OIL-FIRED PRESSURE JET APPLIANCES INSTALLATION AND SERVICING INSTRUCTIONS BOILER OUTPUT Hot Water and Central Heating 12/14 MINIMUM 12 kW (41,000 Btu/h) MAXIMUM 14 kW (48,000 Btu/h) 15/19 MINIMUM 15 kW (51,000 Btu/h) MAXIMUM 19 kW (65,000 Btu/h) 20/25 MINIMUM 20 kW (68,000 Btu/h) MAXIMUM 25 kW (85,000 Btu/h) THESE INSTRUCTIONS APPLY TO UK MODELS ONLY THESE INSTRUCTIONS ARE TO BE LEFT WITH THE APPLIANCE

Worcester danesmoor 12/14 Installation and servicing instrucnions [PDF] (32 pages)

  • Identifier: id-788924
  • Brand: Worcester
  • Device: danesmoor 12/14 Boiler
  • Type: PDF
  • Key Aspects: Common Issue Diagnostic Flows, Environmental Factors and Restrictions, End-of-Life Handling and Disposal
  • UPD Date: 09.05.2026
  • Source File: 789507.pdf
  • Pages: 32
  • Description: Installation guide for the Worcester danesmoor 12/14.
Pages Preview:

Worcester danesmoor 12/14 Installation and servicing instructions [PDF] (28 pages)

  • Identifier: id-1547155
  • Brand: Worcester
  • Device: danesmoor 12/14 Boiler
  • Type: PDF
  • Key Aspects: Manufacturer Contact and Support Data, Pre-Deployment Preparation Steps, Risk Mitigation and Accident Prevention
  • UPD Date: 13.03.2026
  • Source File: 1454120.pdf
  • Pages: 28
  • Description: Complete service manual for the Worcester danesmoor 12/14.
Pages Preview:
  • 1.1 General installation information and advice may be obtained from the Oil Firing Technical Association for the Petroleum Industry (OFTEC). Training courses are also offered by OFTEC, leading to inclusion on their list of registered engineers. 1.2 The appliance should be installed by a competent person. The person installing the appliance should be aware of the Health and Safety at Work Act and take appropriate action to ensure that the regulations are a
  • B A 3 MODEL A B C D E F G 12/14 370 600 855 780 110 92 56 15/19 370 600 855 780 110 92 56 20/25 370 600 855 780 110 92 56 26/32 520 600 855 775 110 92 56 32/50 520 775 997 917 110 120 56 50/70 520 935 997 917 110 160 56 3. Technical Da
  • 4 28 Sec. Kerosene 0.40 60°ES 135 1.11 1.41 195 9.5 8.0 13.5 46,000 12 41,000 28 Sec. Kerosene 0.50 60°ES 100 1.30 1.64 210 10.5 8.5 15.5 53,000 14 48,000 NOMINAL BOILER RATING AT NORMAL OPERATING TEMPERATURE 12/14 Table 2. Electro Oil Inter B9A Burner (See Fig. 21) Fuel Nozzle Pump Pressure (p.s.i.) Fuel Flow Rate Flue Gas Temp. (°C)** %CO2 Approx. Air Setting Appliance Input kW Btu/hr kW Btu/hr Output Kg/h l/h 28 Sec. Kerosene 0.50 60°ES 110 1.40 1.7
  • 5 * NOTE: For use on conventional flue only. ** NOTE: The flue gas temperature is measured in the gas sampling hole on the flue outlet plate. The probe should be inserted to a depth of 50mm and angled towards the flue outlet. The temperature measured is not an absolute flue gas temperature and is for general guidance purposes only! NOTE: The pump pressure given is for general guidance only as variations in nozzle output can be up to ± 15%. It is, therefor
  • 6 4.1 The appliance is not suitable for external installation unless a suitable enclosure is provided. 4.2 The appliance should be positioned on a non-combustible solid base as near to the flue location point as possible. Care should be taken to ensure that the appliance is level; use packing at the corners where necessary. 4.3 When fitting a LLD or RS model, the rear of the appliance must be positioned against an external wall such that the flue terminal
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DANESMOOR 12/14, 15/19, 20/25, 26/32, 32/50, 50/70 CONVENTIONAL FLUE AND ROOM SEALED BF FLOOR STANDING OIL-FIRED PRESSURE JET APPLIANCES INSTALLATION AND SERVICING INSTRUCTIONS BOILER OUTPUT Hot Water and Central Heating 12/14 MINIMUM 12 kW (41,000 Btu/h) MAXIMUM 14 kW (48,000 Btu/h) 15/19 MINIMUM 15 kW (51,000 Btu/h) MAXIMUM 19 kW (65,000 Btu/h) 20/25 MINIMUM 20 kW (68,000 Btu/h) MAXIMUM 25 kW (85,000 Btu/h) 26/32 MINIMUM 26 kW (89,000 Btu/h) MAXIMUM 32 kW (109,000 Btu/h) 32/50 MINIMUM 32 kW (109,000 Btu/h) MAXIMUM 50 kW (170,000 Btu/h) 50/70 MINIMUM 50 kW (170,000 Btu/h) MAXIMUM 70 kW (239,000 Btu/h) THESE INSTRUCTIONS APPLY TO UK MODELS ONLY THESE INSTRUCTIONS ARE TO BE LEFT WITH THE APPLIANCE

Worcester danesmoor 12/14 User instructions & customer care manual [PDF] (12 pages)

  • Identifier: id-802158
  • Brand: Worcester
  • Device: danesmoor 12/14 Boiler
  • Type: PDF
  • Key Aspects: Technical Data and Parameters, Regulatory Compliance and Standards, End-of-Life Handling and Disposal
  • UPD Date: 31.08.2026
  • Source File: 838029.pdf
  • Pages: 12
  • Description: Comprehensive setup guide for the Worcester danesmoor 12/14.
Pages Preview:
  • 2 EXCELLENCE COMES AS STANDARD Thank you for purchasing a Worcester Danesmoor oil-fired ral central heating boiler. Danesmoor oil boilers are made by Worcester Heat Systems and the strictest quality control standards ever demanded are applied throughout every stage of production. Indeed, Worcester Heat Systems have led the field in innovative boiler design and performance for more than 30 years. The result is that your new Danesmoor boiler offers you the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DANESMOOR UTILITY 12-14, 15-19- 20-25, 26-32, 32-50, 50-70 FLOOR-STANDING OIL-FIRED PRESSURE-JET BOILERS USER INSTRUCTIONS & CUSTOMER CARE GUIDE

Worcester danesmoor 12/14: Boiler Category Related Instructions

UltraGas (35-650)
Hoval UltraGas (35-650)
15.06.2026 48 pages

ENG Condensing gas heating boiler UltraGas® (35-650) Operating instructions Subject to modifications 4 205 044/00 - 03/06 Hoval Switzerland Hoval Herzog AG CH-8706 Feldmeilen General-Wille-Strasse 201 Telefon 044 / 925 61 11 Telefax 044 / 923 11 39 Hoval Aus Installation instructions for the Hoval UltraGas (35-650) Boiler. This manual outlines basic operation, device overview, energy usage, maintenance procedures.

Flexicom 24cx
Glow-worm Flexicom 24cx
28.03.2026 64 pages

1 Installation and Servicing www.glow-worm.co.uk High Efficiency Condensing Combination Boilers Flexicom 30cx G.C. No. 47-047-34 24cx G.C. No. 47-047-33 35cx G.C. No. 47-047-35 12801 Device guide for the Glow-worm Flexicom 24cx Boiler. The manual highlights hardware components, product maintenance, component replacement, interface navigation.

omni DUO
Franke omni DUO
18.05.2026 16 pages

Product reference manual for the Franke omni DUO Boiler. The guide explains operation and network configuration, setup tips, internal layout, wiring setup.

GF 200
NTI GF 200
18.04.2026 40 pages

* Lead Free Keep this manual near this appliance for future reference whenever maintenance or service is required. * The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight. GF 2 Instruction guidebook for the NTI GF 200 Water Heater. The guide provides instructions on safety, hardware setup, support details.