Key Aspects: Error Code Explanations, Hardware Verification Checklists, User Training Recommendations
Updated: 11.05.2026
Source File: 1684998.pdf
Pages: 12
Description: Find answers about your Wren 600 in this Assembly manual, which covers technical specifications, connection and wiring, together with step-by-step operation. WALL UNIT 600 Adjustable Corner Assembly Guide For Internal Use: FI.WR.INS.037_WKIN00127_WALL_600_AdjCnr_Rev3.indd Page 2 Step 1. Seat dowel (F) into holes in…
Document Preview & Text Transcription
WALL UNIT
600 Adjustable Corner
Assembly Guide
For Internal Use: FI.WR.INS.037_WKIN00127_WALL_600_AdjCnr_Rev3.indd
WALL UNIT
600 Adjustable Corner
Assembly Guide
For Internal Use: FI.WR.INS.037_WKIN00127_WALL_600_AdjCnr_Rev3.indd
Page 1
BEFORE YOU START
INSTALLATION
SHOULD BE
PERFORMED BY A
COMPETENT
PERSON ONLY.
THIS PRODUCT COULD
BE DANGEROUS
IF INCORRECTLY
INSTALLED
Panel A
x1 Back Panel
REQUIRED TOOLS
NOT to be used
with CAM DOWEL
& CAM LOCK
Panel B
x2 End Panel
Panel C
x2 Base Panel
Frontal
(packed separately)
x1
Blanking Panel
x1
Loose Shelf
x2
Hanging Bracket
x2 Inc Screws
Hanging Bracket Plate
x2 (Screws Not Included)
Hinge Mounting Plate
x2 Inc Screws
Hinge
x2 Inc Screws
Corner Gusset
x2
Hanging Bracket
Cover cap
x2
(F) x8
Wooden Dowel
(G) x8
Cam Dowel
(Expanding)
(H) x8
Cam Lock
(K) x4
30mm
Screw
(L) x21
15mm
Screw
(S) x4
20mm
Screw
(M) x2
Cover Cap
(FF) x2
L Bracket
(N) x1
Door
Buffer
(Z) x8
Shelf Peg
Plastic
(T) x10
Back Panel
Support Clip
WALL UNIT
600 Adjustable Corner
Assembly Guide
For Internal Use: FI.WR.INS.037_WKIN00127_WALL_600_AdjCnr_Rev3.indd
Page 2
Step 1.
Seat dowel (F)
into holes in
end panel (B) as shown.
Step 2.
Seat cam dowel (G)
into holes in end
panel (B) as shown.
Step 3.
Attach panels x2 (C) to
panel (B), using cam
dowels (G) (in blue), and
also using dowels (F)
(in orange) in positions as
shown.
Step 4.
Slide panel (A) into the groove
of panels (B) and x 2 (C).
Step 5.
Insert cam lock (H).
Hand tighten all cam locks
(H), this will expand the
cam dowels (G) and tighten
the unit together.
NB. All Cam Locks (H) are to be positioned facing the
outside of the unit carcass, for ease of tightening.
Do not use power tools with
cam dowel (G) or cam lock (H)
Dowel (F)
& Cam Dowel (G)
location detail
B
A
C
C
G
G
F
F
F
F
G
G
B
View from underside
B
C
C
H
H
G
G
View from underside
Seat (G)
cam dowel
into hole as
shown.
Want to get more from your Wren 2070? See the Assembly manual, which offers help with product description, connection and wiring, and also cleaning instructions.
The Assembly manual for the Wren 1000 2 Drawer walks through main features, servicing and upkeep, together with compliance information across 12 pages.