Service manual [PDF] (204 pages)
- Updated: 21.08.2026
Document Preview & Text Transcription
2002
SERVICE MANUAL
CS50/Z 5RW1-AE1
CS50/Z
SERVICE MANUAL
© 2002 by Yamaha Motor España, S.A.
1st Edition, September 2002
Any reprinting or use of this material
without the prior authorisation of
Yamaha Motor España, S.A.
is expressly prohibited.
Printed in Spain.
EAS00001
EAS00002
NOTICE
This manual was produced by the Yamaha Motor España, S.A., primarily for use by Yamaha/MBK
dealers and their qualified mechanics. It is not possible to include all the knowledge of a mechanic
in one manual. Therefore, anyone who uses this book to perform maintenance and repairs on
Yamaha/MBK vehicles should have a basic understanding of the mechanics and the techniques to
repair these types of vehicles. Repair and maintenance work attempted by anyone without this
knowledge is likely to render the vehicle unsafe and unfit for use.
Yamaha Motor España, S.A., is continually striving to improve all of its models. Modifications and
significant changes in specifications or procedures will be forwarded to all authorized Yamaha/MBK
dealers and will appear in future editions of this manual where applicabe.
NOTE:
Designs and specifications are subject to change without notice.
EAS00005
IMPORTANT INFORMATION
Particularly important information is distinguished in this manual by the following.
The Safety Alert Symbol means ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLDED!
Failure to follow WARNING instructions could result in severe injury
or death to the scooter operator, a bystander, or a person inspec-
ting or repairing the scooter.
A CAUTION indicates special precautions that must be taken to
avoid damage to the scooter.
A NOTE provides key information to make procedures easier or cle-
arer.
t
s WARNING
CAUTION:
NOTE :
EAS00007
HOW TO USE THIS MANUAL
FORMAT OF THIS MANUAL
This manual consists of chapters for the main subject categories (See “Illustrated Symbols”).
First heading :
This is a chapter with a symbol at the top right-hand side of each page.
Second heading :
This title appears at the top of each page to the left of the chapter symbol.
(For the “Inspection and periodic adjustments”, chapter the third heading
appears.)
Third heading :
This is a final heading.
MANUAL FORMAT
All the procedures in this manual are organized sequentially, step by step. The information has been
compiled to make reading easy for the mechanic and to provide useful reference material which
contains ample explanations of all disassembly, repair, assembly and inspection procedures. A par-
ticularly important procedure is placed between a lines of asterisks “**” with each procedure pre-
ceded by “•”.
IMPORTANT CHARACTERISTICS
• Data and special tools are put in a box preceded by a corresponding symbol .
• A number within a circle indicates the number of a part, and a alphabetical letter within a cir-
cle indicates data or an alignment mark , everything else is indicated by a letter within a box .
• The conditions of defective components will precede an arrow symbol and the course of action
to be followd will follow the symbol
.
DETAILED DIAGRAM
Each chapter provides detailed diagrams before each disassembly section, for the easy identifica-
tion of disassembly/assembly procedures.
Pages Preview: