Yamaha QL5 Manuals

EN CL/QL series V4.5 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1 and QL5/QL1 firmware V4.5. Use it in conjunction with the CL5/CL3/CL1 and QL5/QL1 V4 Owner’s Manual and Reference Manual. CL/QL Editor V4.5 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL/QL Editor V4.5. NOTE • The explanations in this supplementary manual reference the CL5. • Keep in mind that in the case of the CL3/CL1 or QL5/QL1, certain channels and faders shown in example screens do not exist on those models and will not be shown on those displays.

101 QL5/QL1 JK Circuit Board to DSP32-CN751 (QL5) to DSP16-CN751 (QL1) Component side（部品側） 2NA-WY63490 1

EN Owner’s Manual Keep This Manual For Future Reference.

SERVICE MANUAL HAMAMATSU, JAPAN SERVICE MANUAL 201404-オープンプライス PA 012121 Copyright (c) Yamaha Corporation. All rights reserved. PDF ’14.06 SPECIFICATIONS（総合仕様） ................................. 4 DIMENSIONS（寸法図） ............................................ 5 PANEL LAYOUT（パネルレイアウト） ...................... 6 QL5 CIRCUIT BOARD LAYOUT （QL5 ユニットレイアウト） ......................................11 QL1 CIRCUIT BOARD LAYOUT （QL1 ユニットレイアウト） ..................................... 15 QL5 DISASSEMBLY PROCEDURE（QL5 分解手順） ... 18 QL1 DISASSEMBLY PROCEDURE（QL1 分解手順） ... 40 LSI PIN DESCRIPTION（LSI 端子機能表） ............. 59 CIRCUIT BOARDS（シート基板図） ....................... 82 INSPECTIONS（検査） ....................................116/121 SETTINGS FOR SHIPMENT（出荷設定） ...... 120/125 SERVICE CHECK PROGRAM （サービス検査プログラム） ............................ 126/140 UPDATING FIRMWARE （FIRMWARE のアップデート） ............................. 154 INITIALIZATION（イニシャライズ） ............... 155/156 TOUCH SCREEN CALIBRATION （タッチスクリーンのキャリブレーション） ... 157/158 FADER CALIBRATION （フェーダーキャリブレーション） .................. 159/160 CONTENTS（目次） COLOR BAR AND CH NAME LCD CALIBRATION （カラーバーと CH NAME LCD のキャリブレーション） ........................................................................ 161/163 SCREEN SHOT（スクリーンショット） ............... 165 USB OVER CURRENT （USB OVER CURRENT について） ...................... 165 UPDATING DANTE MODULE (Brooklyn2) （DANTE モジュール（Brooklyn2）のアップデート） ......................................................................... 166/168 DANTE SOUND OUTPUT CHECK （DANTE 音出し検査） ...................................... 170/172 STARTING SEQUENCE（起動シーケンス） ... 174/178 MEMORY INITIALIZATION（メモリ初期化） ... 182/183 OPERATING APPLICATIONS ON SERVICE TEST PCS （サービス検査用 PC アプリの操作説明） ....... 184/188 PARTS LIST BLOCK DIAGRAM（ブロックダイアグラム） OVERALL CONNECTOR CIRCUIT DIAGRAM （総コネクタ接続回路図） CIRCUIT DIAGRAM（回路図） / QL1 QL5

QL5/QL1 Firmware Update Guide 1 QL5/QL1 Firmware Update Guide Thank you for choosing a Yamaha product. This guide explains how to update the QL series (QL5 and QL1) firmware and its built-in Dante module firmware. ■ Precautions (Please be sure to read this section first!) ・ The user assumes full responsibility for the update. ・ Update the firmware components one unit at a time. ・ Please note that the device may be damaged if you fail to follow these instructions properly, or turn off the device or disconnect the cable while the update is in progress. ・ If the update fails, and the device still does not operate correctly even after you execute the update once again, please contact your Yamaha dealer. ・ Yamaha Corporation owns exclusive copyrights for the QL series firmware, its update program, and the update guide. ・ Audinate owns exclusive copyrights for the Dante firmware and its update program. ・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety, without permission from the copyright owner. ・ The screen shots in this guide are for use with this update procedure only and may be different from the actual screen shots. ・ Dante is a registered trademark of Audinate. ・ Windows is a registered trademark of Microsoft ® Corporation in the United States and other countries. ・ The company names and product names in this document are the trademarks or registered trademarks of their respective companies.

EN CL/QL series V5.1 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1 and QL5/QL1 firmware V5.1. Use it in conjunction with the CL5/CL3/CL1 and QL5/QL1 Owner’s Manual and Reference Manual. NOTE • The explanations in this supplementary manual reference the CL5. • Keep in mind that in the case of the CL3/CL1 or QL5/QL1, certain channels and faders shown in example screens do not exist on those models and will not be shown on those displays.