Zamel EXTA ASP-01 Manuals

ASP - 01 STAIRCASE TIMER INSTRUCTION MANUAL Zakład Mechaniki i Elektroniki ZAMEL sp.j. J.W. Dzida, K. Łodzińska ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: [email protected] APPERANCE FEATURES DESCRIPTION یStaircase lighting control, یContinuous ON-time adjustment of 10 seconds to 16 minutes, یSoft start and switch-OFF (0.8 s), یLoad ON indicator – red LED, یDevice triggering by means of the L wire, یApplicable together with single pole push buttons, illuminated, یTwo-conductor control system, یEasy applicable together with any existing electrical system, یSupplied in series with load. The ASP-01 staircase timer is designed ASP - 01 for corridor and staircase lighting control. After the circuit triggerring the timer keeps the light ON for the preset time and then switches it OFF. It has an adjustable ON-time setting of 10 seconds to 16 min- utes. ON-time may be adjusted by means of a potentiometer. The ASP-01 staircase timer may by applied as a time relay for delayed switch-OFF. It is possible to mount the device under a push button, in a deep junction box of 60 mm diameter. TECHNICAL DATA ASP - 01 Power leads: L(black), brown - in series with the load Rated voltage: 230 V~ Rated voltage tolerance: -15 ÷ +10 % Rated frequency: 50 Hz Rated current: 8 mA Trigger conductor: IN (red) Load supply: brown ON-time adjustment range: 10 s ÷ 16 min ON-time setting accuracy: ±3 % ON-time setting repeatability: ±5 % ON-time setting: continuous (potentiometer) Load supply indicator: red LED Permissible load: 30 ÷ 300 W Fuse technical specification: 5 x 20 mm, ultra-fast, 2 A / 250 V Control: triac Connection wires quantity: 3 Connection wire section: 1 mm2 Connection wire length: 10 cm Operating temperature: -20 ÷ +45 oC Operating position: optional Casing fastening: for 60 mm junction box Casing IP: IP40 Protection class: II Overvoltage category: II Pollution level: 2 Dimensions: 50 x 50 x 15 mm Weight: 28 g Standard conformity: PN-EN 60669-1; PN-EN 60669-2-1 PN-EN 61000-4-2,3,4,5,6,11 Load ON indicator ON-time setting Load supply lead Power lead (L) Fuse socket Trigger lead (IN) br o wn re d bl ac k The device should be connected to a single- phase system accordin- gly to current standards. The device connection swill be described in this manual. Only qualified electricians are allowed to connect, assembly and adjust the timer. It is ne- cessary to read this manual before the timer mounting. Do not disassembly the timer casing or you will lose any war- ranty rights and expose yourself to the electric shock hazard. Before mounting operation make sure of disconnecting the connection wires from the electric network. Use a cross-head screwdriver of 3.5 mm diameter to mount the devi- ce. The timer should be carried, stored and used in an appropriate way. Do not mount the timer in case of any device parts lack, damage or deformation. In case of malfunction please notify the manufacturer. CAUTION