Zamel EXTA ED-1 Manuals

ED - 1 SIGNALLING BELL INSTRUCTION MANUAL ZAMEL Sp. z o.o. ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: [email protected] FEATURES TECHNICAL DATA DESCRIPTION APPERANCE ی Electromechanical bell, ی Brass bell gong in a plastic casing, ی Designed for acoustic signalling at home and industrial systems, ی Either surface-mounted or TH35 rail mounted, ی Double-module casing, ی Sound level: approximately 68 dB. The ED-1 electromechanical bell may be used in various systems, where acoustic signalling is needed (e.g. phase decay signalling). The bell is designed for mounting on TH35 rail. The device should be connected to a single- phase system accordin- gly to current standards. The device connections will be described in this manual. Only qualified electricians are allowed to mount, connect and adjust the bell. It is necessary to read this ma- nual before the device mounting. Do not disassembly the timer casing or you will lose any warranty rights and expose yourself to the electric shock hazard. Before mounting operation make sure n w ri e s oitc g the conne nitc sid conne o f from the electric network. Use a cross- head screwdriver of 3.5 mm diameter to mount the device. The bell should be carried, stored and used in an ap- propriate way. Do not mount the bell in case of any device parts lack, damage or deformation. In case of malfunction please notify the manufacturer. ED - 1 Power terminals: L, N Rated voltage: 230 V~ Rated voltage tolerance: -15 ÷ +10 % Rated frequency: 50 / 60 Hz Rated current: 4,5 VA Switch-ON control: electromechanical bell Connection terminals quantity: 2 Connection wire section: 0,2 ÷ 2,50 mm2 Operating temperature: 0 ÷ +35 oC Operating position: optional Casing fastening: TH 35 rail (accordingly to PN-EN 60715) Casing IP: IP20 (PN-EN 60529) Protection class: II Overvoltage category: II Pollution level: 2 Dimensions: double-module (35 mm) 90 x 35 x 66 mm Weight: 92 g Standard conformity: PN-EN 60669-1; PN-EN 60669-2-1 PN-EN 61000-4-2,3,4,5,6,11 Power terminals (L, N) CAUTION

ED - 1 SIGNALLING BELL INSTRUCTION MANUAL Zakład Mechaniki i Elektroniki ZAMEL sp.j. J.W. Dzida, K. Łodzińska ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: [email protected] FEATURES TECHNICAL DATA DESCRIPTION APPERANCE ی Electromechanical bell, ی Brass bell gong in a plastic casing, ی Designed for acoustic signalling at home and industrial systems, ی Either surface-mounted or TH35 rail mounted, ی Double-module casing, ی Sound level: approximately 68 dB. The ED-1 electromechanical bell may be used in various systems, where acoustic signalling is needed (e.g. phase decay signalling). The bell is designed for mounting on TH35 rail. The device should be connected to a single- phase system accordin- gly to current standards. The device connections will be described in this manual. Only qualified electricians are allowed to mount, connect and adjust the bell. It is necessary to read this ma- nual before the device mounting. Do not disassembly the timer casing or you will lose any warranty rights and expose yourself to the electric shock hazard. Before mounting operation make sure of disconnecting the connection wires from the electric network. Use a cross- head screwdriver of 3.5 mm diameter to mount the device. The bell should be carried, stored and used in an ap- propriate way. Do not mount the bell in case of any device parts lack, damage or deformation. In case of malfunction please notify the manufacturer. ED - 1 Power terminals: L, N Rated voltage: 230 V~ Rated voltage tolerance: -15 ÷ +10 % Rated frequency: 50 / 60 Hz Rated current: 4,5 VA Switch-ON control: electromechanical bell Connection terminals quantity: 2 Connection wire section: 0,2 ÷ 2,50 mm2 Operating temperature: 0 ÷ +35 oC Operating position: optional Casing fastening: TH 35 rail (accordingly to PN-EN 60715) Casing IP: IP20 (PN-EN 60529) Protection class: II Overvoltage category: II Pollution level: 2 Dimensions: double-module (35 mm) 90 x 35 x 66 mm Weight: 92 g Standard conformity: PN-EN 60669-1; PN-EN 60669-2-1 PN-EN 61000-4-2,3,4,5,6,11 Power terminals (L, N) CAUTION