Zamel Exta SOS-01 Manuals

LIGHT SENSOR SOS-01 INSTRUCTION Zakład Mechaniki i Elektroniki ZAMEL sp.j. J.W. Dzida, K. Łodzińska ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: [email protected] VER. 001_31.03.2010 The device must be installed in accordance with standards valid in a particular country. The device should be connected according to the details included in this operating manual. Installation, connection and control should be car- ried out by a qualified electrician staff, who act in accordance with the servi- ce manual and the device functions. Disassembling of the device is equal with a loss of guarantee and can cau- se electric shock. Before installation make sure the connection cables are not under voltage. The cruciform head screwdriver 3,5 mm should be used to instal the device. Improper transport, storage, and use of device influence its wrong functioning. It is not advisa- ble to instal the device in the following cases: if any device part is missing or the device is damaged or deformed. In case of improper functioning of the de- vice contact the producer. CAUTION APPEARANCE FEATURES TECHNICAL DATA DESCRIPTION SOS-01 light sensor is used to co- operate with twilight switches WZM- 01, WZM-02, WZH-01, WZN-01 pro- duced by ZAMEL. It measures the luminous flux density outside and passes/ directs the signal straight to the twilight switch. The light sensor is set in a herme- tic casing in order to work in difficult weather conditions (IP 54). It is mo- unted by means of attached screws on the surface. SOS-01 Terminal clamps: IN, IN Maximum sensor cable length: 50 m (MTY 2 x 0,5 mm2) Light sensor: inner Number of terminal clamps: 2 Section of connecting cables: 0,2 ÷ 2,50 mm2 Ambient temperature range: -20 ÷ +45 oC Operating position: freely Casing mounting: 2x stretcher 6x(3,5x35) Casing protection degree: IP54 (EN 60529) Protection level: II Overvoltage category: II Pollution degree: 2 Surge voltage: 1 kV (EN 61000-4-5) Dimensions: 84x68x43 mm Weight: 0,05 kg Reference standard: EN 60669-1 EN 60669-2-1 EN 61000-4-2,3,4,5,6,11 ● Hermetic casing (IP 54), ● cooperation with twilight switches WZM-01, WZM-02, WZH-01, WZN-01 produced by ZAMEL, ● surface mounting, ● terminal clamps 0,2 ÷ 2,50 mm2. Light sensor Output terminals (IN, IN) Photoresistor The symbol means selective collecting of electrical and electronic equipment. It is forbidden to put the used equipment together with other waste.