Zamel RCR-01 Manuals

COOPERATION AND OPERATING RANGE BATTERY CHANGE * - 1-channel transmitters do not cooperate with roller blind controllers. CAUTION: The given range concerns open area - an ideal condition without any natural or artificial obstacles. If there are some obstacles between a transmitter and a receiver, it is advisable to decrease the range according to: wood and plas- ter: from 5 to 20 %, bricks: from 10 to 40 %, reinforced concrete: from 40 to 80 %, metal: from 90 to 100%, glass: from 10 to 20 %, Over- and underground medium and high electrical power lines, radio and television transmitters, GSM transmit- ters set close to a device system have also a negative influence on the range. Battery discharge status is signalled by several LED red diode flashes during transmission time. 1. Remove the upper cover of the transmitter. 2. Remove the upper print- ed-circuit board. 3. Remove the batteries. 4. Mount new batteries. Watch battery polarisa- tion marked on the latch. Wrong battery mounting may cause device dam- age. 5. Mount the upper printed-circuit board inserting the pins into the connectors. 6. Mount the upper cover’s latches into the latches of the base. Symbol ROP-01 ROP-02 ROB-01 SRP-02 SRP-03 RWG-01 RWL-01 ROМ-01 ROМ-10 RDP-01 RTN-01 RNK-02 180 м 200 м 200 м 200 м 200 м 250 м 180 м 250 м 250 м 180 м 250 м RNK-04 180 м 200 м 200 м 200 м 200 м 250 м 180 м 250 м 250 м 180 м 250 м P-256/8 230 м 250 м 250 м 250 м 250 м 300 м 200 м 300 м 300 м 230 м 300 м P-257/4 (2) 180 м 200 м 200 м 200 м 200 м 250 м 180 м 250 м 250 м 180 м 250 м RNМ-10 230 м 250 м 250 м 250 м 250 м 300 м 200 м 300 м 300 м 230 м 300 м RNP-01 160 м 180 м 180 м 180 м 180 м 200 м 160 м 200 м 200 м 160 м 200 м RNP-02 160 м 180 м 180 м 180 м 180 м 200 м 160 м 200 м 200 м 160 м 200 м RNL-01 160 м 180 м 180 м lack* lack* 200 м 160 м 200 м 200 м 160 м 200 м RTN-01 200 м 200 м 200 м 200 м 200 м 250 м 200 м 250 м 250 м 200 м 250 м RCR-01 160 м 180 м 180 м lack* lack* 200 м 160 м 200 м 200 м 160 м 200 м RTI-01 160 м 180 м 180 м 180 м 180 м 200 м 160 м 200 м 200 м 160 м 200 м RXМ-01 230 м 250 м 250 м 250 м 250 м 300 м 200 м 300 м 300 м 230 м 300 м RADIO MOTION SENSOR RCR-01 TECHNICAL DATA Input rated voltage: 3 V DC Battery type: 2 x AAA / R03 Battery life: 1 year (depending on use) Liczba kanałów: 1 Twilight sensor adjustment range: 2 ÷ 20 lx Transmission: radio 868,32 MHz Coding way: unidirectional Coding: addressing transmission Range: up to 200 m in the open area Optic signalling of transmitter’s operation: LED red diode Ambient temperature range: -10 ÷ +55 °C Operating position: free Casing mounting: wall plugs, double-sided adhesive tape Casing protection degree: IP20 (EN 60529) Protection level: III Pollution degree: 2 Dimensions: Ø70 x 40 mm Weight: 0,070 kg Reference standard: ETSI EN 300 220-1, ETSI EN 300 220-2 OPERATION The device can operate in two modes: 1. Motion sensor, 2. Motion sensor with twilight switch. Operation modes are adjusted by means of two switches which are under the top cover of the sensor. Mode 1 - adjust the switch to „C” position, Mode 2 - adjust the switch to „F” position. It is important to adjust the switches in the same position, otherwise they operate incorrectly. In the operation mode with a twilight sensor adjust luminous density by means of a potentiometer. Potentiometer adjustment to „ ” sign means operation adjustment during daylight - about 20 lx, and potentiometer adjustment to „ ” sign means operation adjustment during night - about 2 lx. Radio transmission range (up to 200 m - depending on a receiver) can be increased by means of a retransmitter or few RTN-01 retransmitters.