Zero Z01.03 Manuals

zero HOME AUTOMATION Z01 - SLIDING GATE PG1 USER MANUAL AND CONFIGURATION Z01.REV01.2018 IT | EN | FR zero HOME AUTOMATION Z01.03 - SLIDING GATE MOTOR SUPPLY 230V zero HOME AUTOMATION Z01 - SLIDING GATE PG2 zero HOME AUTOMATION zero HOME AUTOMATION Z01 - SLIDING GATE PG3 INDEX 01. SAFETY INSTRUCTIONS 02. OPERATOR TECHNICAL SPECIFICATIONS DIMENSIONS 03. INSTALLATION INSTALLATION DIMENSIONS INSTALLATION STEPS TIPICAL INSTALLATION 04. MAINTENANCE MANUEL RELEASE TORQUE TRANSMISSION 05. TROUBLESHOOTING 01. SAFETY INSTRUCTIONS ATTENTION: •To ensure the safety of people, it is important that you read all the following instructions. Incorrect installation or incorrect use of the product can cause physical injury and material damage. •Keep these instructions in a safe place for future reference. •This product was designed and produced strictly for the use indicated in this manual. Any other use, not expressly indicated here, could compromise the good condition/ operation of the product and/or be a source of danger. •ZERO SRLS. is not responsible for the improper use of the product, or other use than that for which it was designed. •ZERO SRLS. is not responsible if safety standards were not taken into account when instal- ling the equipment, or for any deformation that may occur to it. •ZERO SRLS. is not responsible for the safety and proper operation when using components not sold by them. •Do not make any modifications to the operator components and / or their accessories. •Before installation unplug the automatism from the source of power. •The installer must inform the client how to handle the product in case of emergency and provide this manual to user. •Keep remote controls away from children, to prevent the automated system from being activated involuntarily. •The customer shall not, under any circumstances, attempt to repair or tune the operator .Must call qualified technician only. •Connect the automatism to a 230V plug with ground wire. •Operator for outdoor and indoor use.