Zhone BITSTORM HP-150 Manuals

VDSL2 High Performance IP-DSLAM Bitstorm-HP-150, Bitstorm-HP-160  Compact, 1U space efficient design with 24-Ports of VDSL2 (up to 30a) and optional integrated splitters  Backward compatible with legacy ADSL / ADSL2+ modems  Downstream Power Back-off (DPBO) minimizes interference with adjacent DSL services in the same binder group  Dual GigE Uplinks (2 SFP + 2 Built-In GE Uplink Ports) with Link Aggregation  VLAN/Bridge Forwarding with QoS and Security Features  Stacking Support with In-band Management  Hardened for Outside Plant Deployment (DC models) 24-Port G.993.2 Standards-based 100/100Mbps VDSL2 IP-DSLAM The Bitstorm-HP family of products are 24-port VDSL2 IP-DSLAMs, featuring a hardened, high performance design with efficient power and space considerations. Designed as a 1U high product, the Bitstorm-HP is ideal for deployment in space constrained indoor MDU or external cabinet locations to take advantage of short, last-mile loops which are ideal for VDSL2 rate/reach performance. The Bitstorm-HP family uses the latest VDSL2 silicon technology from Ikanos, and can support all eight (8) VDSL2 profiles (up to 30a) to deliver up to 100/100Mbps Up/Down line-rate when paired with a Zhone's VDSL2 CPE (6652-A2). The lower cost Bitstorm-HP-150 models support up to Profile 17a, delivering line rates up to 100Mbps Down / 50Mbps Up. All Bitstorm HP models fully interoperate with Zhone's VDSL2 6652-A2 (30a, Bridge/Router) and 6652-A1 (17a, Smart Bridge) modems. The Bitstorm-HP family is also backward compatible with ADSL/ADSL2+ when connected to industry-standard ADSL2+ modems, thus providing an easy migration path for users running legacy ADSL services, while providing expanded revenue opportunities when deploying new high-speed VDSL2 services. The Bitstorm-HP family delivers very high-speed line-rate performance and supports triple play services implemented on a powerful Network Processor. The Bitstorm-HP is designed with separate control and data paths to allow high bit-rate services while supporting advanced L2/L3 features such as - DHCP (Option-82), IGMP Snooping/Proxy, IP/ARP Spoofing, Forced MAC Forwarding, QoS and Security/Filtering in either Bridged or VLAN Switched operating modes. The Bitstorm-HP also supports configurable, Downstream Power Back-off (DPBO) capabilities for both ADSL and VDSL2. Sometimes used in remote cabinet applications, DPBO equips service providers with the ability to adjust the transmit power levels of each port to be at the same level as would be expected to be found at the same point in the cable if the signal had been injected at the central office exchange. This advanced functionality can be used to ensure that the ADSL2/VDSL2 services from the Bitstorm-HP do not adversely impact other DSL services that may exist in the same outside plant binder group. Available with optional, built-in POTS splitters (600 or 900 ohm) as well as DC or AC powering options, the Bitstorm-HP features an intuitive Web Graphical Interface for device configuration and management and can also be managed using Secure Shell (SSH), Telnet (CLI) or SNMPv1/v2.