ZIEHL TR1200 Manuals

ZIEHL industrie – elektronik GmbH + Co KG Daimlerstraße 13, D – 74523 Schwäbisch Hall + 49 791 504-0, [email protected], www.ziehl.de Temperature Relays and MINIKA®, Mains Monitoring, Digital Panelmeters MINIPAN®, Switching Relays and Controls Operating Instructions TR1200 updated: 130215 Ba/Fz from Firmware: -02 TR1200 12320-0702-03 Page 1 / 20 www.ziehl.de - Pt 100 thermostat with 12 sensor ports and Interface RS485 --- Archive document---

ZIEHL industrie – elektronik GmbH + Co KG Daimlerstr.13, 74523 Schwäbisch Hall, Germany + 49 791 504-0, [email protected], www.ziehl.de Temperature Relays and MINIKA® Mains Monitoring Digital Panelmeters MINIPAN® Switching Relays and Controls Measuring Transducers Grid- and Plant Protection Quick Guide TR1200 updated: 2017-11-09/Fu from Firmware: -03 TR1200 12320-0752-04 Page 1 / 8 www.ziehl.de - Pt 100 thermostat with 12 sensor ports and Interface RS485 Detailed operating manual see: http://www.ziehl.com/en/Products/detail/TR1200-39 1 Display and controls 1 LED relay state (yellow) OFF The relay is released Illuminated The relay is picked up 2 LED sensors (yellow) Illuminated Displays the sensor value belonging to the LED in the digital display flashes, 8Er18or8Er28 Sensor error in the corresponding sensor circuit All illuminated Displays the value of the warmest sensor in the digital display 3 Digital display 3 digits (red) Display of sensor value Display of error codes e.g. 8Er98 4 Hindmost decimal point (red) OFF Display mode Illuminated Menu mode flashes Parameter mode 5 LED error (red) OFF normal operation Illuminated with 8Er18 , 8Er28 , 8Er88 or 8Er98 Sensor error, malfunction, invalid parameter 6 Button Up / Down (display mode, normal operation) Press briefly Change into the menu mode (see Operating instructions Point 8.4) Press for > 2s Displays the stored MAX value (Up) / MIN value(Down) – press also button Set for ≥ 2s to erase the stored value 7 Button Set / Reset (display mode, normal operation) Press briefly Displays the value of next sensor (sensor LED illuminates) Press for > 2s Reset, back to display mode Press for > 10s Displays the software version (e.g. 000) 8 LED RS485 Interface (yellow) Rx flashes briefly Unit is receiving data via the RS485 interface Tx flashes briefly Unit is transmitting data via the RS485 interface