Zoom Studio 1202 Manuals

Thank you for selecting the ZOOM STUDIO 1202 (hereafter called “The 1202”). The 1202 is a sophisticated effect processor with the following features: • A total of 512 preset effect programs (32 effects x 16 patterns) makes the unit immediately usable for a wide variety of creative applications. • 44.1 kHz sampling frequency assures high performance, ideal for processing sound sources such as guitar, bass, synthesizer, etc. • Full stereo configuration—a first in this class— creates rich, natural reverb sounds. Using the two channels individually is also possible. Please take the time to read this manual carefully, in order to get the most out of your 1202 and to ensure optimum performance and reliability. Safety Precautions Please observe the following safety tips and precautions to ensure hazard-free use of the 1202. • Power requirements The 1202 is powered by the supplied AC adapter. Do not use any other kind of AC adapter to prevent malfunction and safety hazards. When using the 1202 in an area with a different line voltage, please consult your local ZOOM distributor about acquiring a proper AC adapter. • Environment Avoid using your 1202 in environments where it will be exposed to: • Temperature extremes • High humidity or moisture • Excessive dust or sand • Excessive vibration or shock • Handling Since the 1202 is a precision electronic device, avoid applying excessive force to the switches and buttons. Also take care not to drop the unit, and do not subject it to shock or excessive pressure. • Alterations Never open the case of the 1202 or attempt to modify the product in any way since this can result in damage to the unit. • Connecting cables and input and output jacks You should always turn off the power to the 1202 and all other equipment before connecting or disconnecting any cables. Also make sure to disconnect all cables and the AC adapter before moving the 1202. Usage Precautions • Electrical interference The 1202 uses digital circuitry that may cause interference and noise if placed too close to other electrical equipment, such as TV sets and radio receivers. If such problems occur, move the 1202 further away from the affected equipment. Also, when fluorescent lights or devices with built-in motors are close to the 1202, the unit may not function properly. • Cleaning Use a soft, dry cloth to clean the 1202. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull the finish or damage the surface. Please keep this manual in a convenient place for future reference. ZOOM STUDIO Operation Manual

Thank you for selecting the ZOOM STUDIO 1202 (hereafter called “The 1202”). The 1202 is a sophisticated effect processor with the following features: • A total of 512 preset effect programs (32 effects x 16 patterns) makes the unit immediately usable for a wide variety of creative applications. • 44.1 kHz sampling frequency assures high performance, ideal for processing sound sources such as guitar, bass, synthesizer, etc. • Full stereo configuration—a first in this class— creates rich, natural reverb sounds. Using the two channels individually is also possible. Please take the time to read this manual carefully, in order to get the most out of your 1202 and to ensure optimum performance and reliability. Safety Precautions Please observe the following safety tips and precautions to ensure hazard-free use of the 1202. • Power requirements The 1202 is powered by the supplied AC adapter. Do not use any other kind of AC adapter to prevent malfunction and safety hazards. When using the 1202 in an area with a different line voltage, please consult your local ZOOM distributor about acquiring a proper AC adapter. • Environment Avoid using your 1202 in environments where it will be exposed to: • Temperature extremes • High humidity or moisture • Excessive dust or sand • Excessive vibration or shock • Handling Since the 1202 is a precision electronic device, avoid applying excessive force to the switches and buttons. Also take care not to drop the unit, and do not subject it to shock or excessive pressure. • Alterations Never open the case of the 1202 or attempt to modify the product in any way since this can result in damage to the unit. • Connecting cables and input and output jacks You should always turn off the power to the 1202 and all other equipment before connecting or disconnecting any cables. Also make sure to disconnect all cables and the AC adapter before moving the 1202. Usage Precautions • Electrical interference The 1202 uses digital circuitry that may cause interference and noise if placed too close to other electrical equipment, such as TV sets and radio receivers. If such problems occur, move the 1202 further away from the affected equipment. Also, when fluorescent lights or devices with built-in motors are close to the 1202, the unit may not function properly. • Cleaning Use a soft, dry cloth to clean the 1202. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull the finish or damage the surface. Please keep this manual in a convenient place for future reference. ZOOM STUDIO Operation Manual