ZyXEL Communications LTE4506 Manuals

1/2 Copyright © 2016 ZyXEL Communications Corp. All Rights Reserved Quick Start Guide LTE4506 4G LTE-A HomeSpot See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings. 1 Make sure the LTE4506 is turned off. On the bottom of the LTE4506, open the cover of the micro SIM card slot. Hardware Installation 1 1 1 Gently push the SIM card into the SIM card slot. Put the cover back in place. Note: Please do NOT use a nano-SIM to micro-SIM card adapter to avoid slot pin damage. Select the type of plug used in your country. Insert the plug in the micro USB power adaptor until you hear a "click". Use the included power adaptor (that has an output of 5V at 1.5A or higher current) to connect the LTE4506 micro USB port to an appropriate power outlet. Press the power button to turn it on. LTE4506 Wi-Fi is enabled by default. To disable or enable it again, press the Wi-Fi button on the top of the LTE4506 for one second. To initiate WPS to set up a secure Wi-Fi connection between the LTE4506 and a wireless client, press the Wi-Fi button on the top of the LTE4506 for longer than five seconds. Use an Ethernet cable to connect a computer to the Ethernet port of the LTE4506 for initial configuration or Internet access. 6 POWER ON RESET SIM SSID1: ZyXEL_“last four digits of the MAC address” Key: XXXXXXXXX Key: XXXXXXXXX SSID2: ZyXEL_“last four digits of the MAC address”_5G 2 3 4 15 16 Insert SIM Card into slot Bottom RESET SIM Press for 1 Second: Turn On Wi-Fi WIFI ON > 5 Seconds: WPS ON WPS ON Optional 3 1 2 4 6 5