Power Glide Manuals

ASSEMBLY AND OPERATING INSTRUCTIONS MODEL 60101211 18 VOLT CORDLESS CUTOUT TOOL Please keep this instruction manual for future reference MADE IN CHINA Distributed By: World Factory, Inc. Southlake, Tx. 1-888-422-7800 ©2002 World Factory, Inc. IF YOU HAVE ANY Product instruction handbook for the Power Glide 60101211 Power Tool. This reference includes operational procedures, operating guidelines, reset instructions, installation guides.

Model No: 60109411 ® 1/4 Sheet Palm Sander Instruction Manual Type 60109411 Input Voltage 120V ~ 60Hz Input Power 1.5 Amp No Load Speed 14,000 OPM Pad Dimensions 4-1/4” x 4-1/4” (108 x 108mm) Paper Size 4-1/2” x 5-1/2” (114 x 140mm) Orbit Size 5/64” Full operation manual for the Power Glide 60109411 Sander. The manual includes instructions for support details, maintenance guidelines, network setup, service instructions.

Model No: 60109830 ® 1/3 Sheet Finish Sander Instruction Manual Type 60109830 Input Voltage 120V ~ 60Hz Input Power 1.2 Amp No Load Speed 12,000 OPM Pad Dimensions 3-1/2" x 7-3/8" (90 x 187mm) Paper Size 3-5/8" x 9" (92 x 228mm) Power Cord 18/2 x 6' L Double Operating and setup manual for the Power Glide 60109830 Sander. This guide includes calibration steps, hardware instructions, system setup, diagnostic information.

Model No: 60109410 ® Jig Saw Instruction Manual Type 60109410 Input Voltage 120V ~ 60Hz Input Power 3.5 Amp No Load Speed 500 - 3,000 SPM Stroke Length 3/4" (19mm) Max. Cutting Depth @ 90 Degrees 2" (55mm) Power Cord 18/2 x 6' Double Insulated Yes Dimensi Product instruction handbook for the Power Glide 60109410 Power Tool. The manual outlines technical specifications and component overview, technical troubleshooting, product handling.

Full operation manual for the Power Glide 60701126 Grinder. The manual contains instructions for network setup, operational safety, maintenance procedures.

6 SPEED MINI HAND GRINDER WITH 40 PIECE ACCESSORY KIT 110 V 6 SPEED KIT MODEL 06-01-00001 Instruction Manual PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE PLEASE KEEP THIS INS Operation and maintenance manual for the Power Glide 06-01-00001 Grinder. The manual outlines technical specifications and repair references, product handling, operating modes, operation.

RECHARGEABLE DRILL Instruction Manual Please keep this instruction manual for future reference Technical data Model Tool Battery Standard Input Voltage & Frequent Voltage(DC) No load speed Low Continuous noise level Hand-Arm-Vibration 60101200 60101201 6010123 Complete technical documentation for the Power Glide 60101201 Drill. This manual describes setup, usage, and supported accessories, technical guidelines, maintenance schedule, connectivity setup.

RECHARGABLE FLASHLIGHT Instruction Manual Please keep this instruction manual for future reference This cordless flashlight has been manufactured in accordance with the applicable standards and equipment safety legislation. When using electrical appliances, it Instruction guidebook for the Power Glide 60101306 Flashlight. It covers menu navigation, repair references, daily usage.

Model No: 60109810 ® 4-1/2" Angle Grinder Instruction Manual Type 60109810 Input Voltage 120V ~ 60Hz Input Power 4.0 Amp No Load Speed 11,000 RPM Max. Disc Diameter 4-1/2" (115mm) Spindle Thread 5/8"-11 UNC Flange Shoulder Diameter 7/8" (22.2mm) Power Cord Quick start guide for the Power Glide 60109810 Grinder. This guide elaborates on device features and maintenance guidelines, performance details, user preferences, regulatory notices.

251109rev1 Made in China ©2009 World Factory, Inc. Distributed by: World Factory, Inc. Irving, TX 75063 Due to ongoing product development the actual product or products may vary from the illustrations or photos shown within this manual. Read the instructions User handbook for the Power Glide 60101464 Pole Saw. This documentation explains configuration and maintenance, technical specifications, operational guidelines, wiring diagrams.