Makita DF030D Technical Information

TECHNICAL INFORMATION 10.8 1.3 115 0 - 1,300 6.35 (1/4) Hex 0 - 350 High Low Li-ion Models No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment Optional accessories DF030D (FD01*) 10.8V Cordless Driver Drill Dimensions: mm (") Width (W) Height (H) Length (L) 157 (6-3/16) 53 (2-1/16) 183 (7-1/4) No load speed: min-1 = rpm Max. output: W Battery 18 stages + drill mode Torque adjustment Type of cell Voltage: V Capacity: Ah Driving shank: mm (") 14 (120) Max. fastening torque: N.m (in.lbs) Capacities: mm (") 0.5 - 3.5 (4 - 30) Clutch torque setting: N.m (in.lbs) Steel Wood Soft joint 24 (210) Hard joint 10 (3/8) 21 (13/16) Driver bits, Socket bits, Hex shank drill bits for wood, Hex shank drill bits for steel, Bit piece, Drill chuck, Charger DC10WA, Battery BL1013 Model DF030D is a 10.8V cordless driver drill compact and lightweight for easy handling, but featuring 2-speed gear selection with variable speed in each range for a wide range of applications. Uses new 10.8V Li-ion battery of stick type as a power unit. The models also includes the accessories listed below in "Standard equipment". L H W Yes Yes 0.88 (1.9) Reverse switch LED job light 22 (200) Lock torque: N.m (in.lbs) Yes Yes Yes Electric brake Variable speed control by trigger Mechanical 2-speed Net weight [with battery BL1013]: kg (lbs) Note: The standard equipment for the tool shown above may differ by country. Phillips bit 2-50 (double-end) ........ 1 pc (for countries using M-type spindle) Phillips bit 2-45 (double-end) ........ 1 pc (for countries using N-type spindle) Holster ............................................ 1 pc This product is available in the following variations. DF030D DF030DW DC10WA Model No. type quantity Charger 2 BL1013 (Li-ion 1.3Ah) Battery Makita-blue white DF030DWE DF030DWEW Makita-blue white Housing color 50 with DC10WA Charging time (approx.): min. Yes Plastic carrying case Offered to USA, Canada Mexico, Panama All countries except the four listed above * Model number for North and Central American countries except Mexico and Guam

another as follows: Insert a small slotted screwdriver through the punched hole of Set plate and move Set plate in the direction of the arrow using the screwdriver. (Fig.1) 2) Remove Housing (R) from Housing (L) by loosening six Bind PT3x6 tapping screws. 3) Remove Speed change lever assembly from Gear assembly. (Fig. 2) 4) Remove DC motor from Gear assembly as illustrated in Fig. 3 5) Separate DC motor from Bracket by loosening two M3x6 Pan head screws. (Fig. 4) 1) Fix Motor bracket to DC motor with two M3x6 Pan head screws. Note: Align the red marking on DC motor with non-convex portion of Motor bracket. (Fig. 5) 2) Fix Gear assembly to DC motor with bracket and turn Gear assembly clockwise. Note: Align the change lever of Gear assembly with the red marking on DC motor. (Fig. 3) 3) Fix Speed change lever assembly to the change lever of Gear assembly as illustrated in Fig. 2. Note: Set the change lever of Gear assembly in place between two Compression springs 4 on the reverse side of Speed change lever assembly, and insert the emboss of the change lever into one of Compression spring 4. (Fig. 6) Repair P 2/ 4 [2] DISASSEMBLY/ASSEMBLY [3]-1. DC Motor, Gear Assembly, Speed Change Lever Assembly Fig. 2 Fig. 4 Fig. 3 DISASSEMBLING ASSEMBLING [1] NECESSARY REPAIRING TOOLS CAUTION: Remove the bit and the battery from the machine for safety before repair/ maintenance in accordance with the instruction manual! Description Code No. Use for 1R291 Removing/ Installing Bit sleeve Fig. 1 Handle (R) Handle (L) small slotted screwdriver Set plate (2pcs.) Retaining ring S and R pliers Speed change lever assembly convex portion of Motor bracket change lever of Gear assembly change lever of Gear assembly Emboss of change lever of Gear assembly DC motor Turn Gear assembly counterclockwise. Pull out Gear assembly from DC motor with Bracket. DC motor Motor bracket M3x6 Pan head screws (2pcs.) 1 Shift the change lever of Gear assembly to the high speed position. 2 3 Fig. 5 Fig. 6 non-convex portion Compression spring 4 Speed change lever assembly red marking on terminal of positive pole convex portions Viewed from the upper position

position or high speed position. (5) Fixing Housing (R) to Housing (L) with six Bind PT3x16 tapping screws. (6) Insert two Set plates in place. (Fig. 1) Set Leaf spring in place. (Fig. 8) Note: Do not face the center edge of Leaf spring to Housing L. Link the notch of F/R change lever and the protrusion of Switch, then install them in Housing L. (Fig. 9) Repair P 3/ 4 [2] DISASSEMBLY/ASSEMBLY [3]-1. DC Motor, Gear Assembly, Speed Change Lever Assembly (cont.) ASSEMBLING Fig. 9 Fig. 8 Fig. 7 [3]-3. Assembling Leaf Spring [3]-4. Assembling F/R Change Lever [3]-2. Disassembling Bit Holder of Gear Assembly Sleeve Ring spring 10 (1) While pushing the top of sleeve by your thumb to prevent Compression spring 13 from popping out from Bit holder, expand Ring spring 10 using 1R291 and raise the opposite of the expanded Ring spring 10 by your index finger. (Fig. 7) (2) Ring spring 10 can be removed. And Flat washer 11, Compression spring 13, Bit sleeve and Steel ball 3 (2pcs.) can be removed. 1R291 Leaf spring center edge Housing L notch of F/R change lever protrusion of Switch Circuit diagram Fig. D-1 Switch Terminal White DC motor red marking Red Color index of lead wires' sheath Black ＋ ＋ － － M1 M2 LED

Wiring diagram Fig. D-2 Fig. D-3 Pay attention to the directions of lead wires and connect Flag receptacles to electrical parts. Refer to the following illustration. Fig. D-4 Before installing Switch in Housing R, route Lead wires as illustrated below and connect two Connectors. Do not ride their Lead wires on ribs. Route Lead wires between ribs. Insert Connectors between their Lead wire holders. Bend the terminals of DC motor as illustrated. Flag receptacles and Lead wires have to be far from DC motor. Do not ride them on the ribs. Lead wires holders Do not ride Lead wires on their embosses. Face the glue-attached portion of LED to DC motor side. Terminal DC motor Connector Lead wire holders LED Lead wires in this area must be tight. red marking Connector (To Switch)