marsden MS2300 Operator's Manual

This product has been manufactured in accordance with the harmonized European standards, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 89/336/EEC Low Voltage Directive 73/23/EEC Marsden Group Holdings Ltd. IN-0881 5038B MS2300 Baby Scale OPERATOR’S MANUAL

4 TABLE OF CONTENTS Introduction …………………………………………………………2 Power supply ……………………………………………………… 2 Low battery ………………………………………………………… 2 Specifications ……………………………………………………… 2 Display and key function ……………………………………….. 3 Calibration ………………………………………………………….. 4 Trouble error measures ………………………………………..5 & 6 1 START Press Test pin twice which at rear of the scale to enter Test mode. Press ON/OFF/ZERO key to zero the scale. Display shows span count (4000~~14000). Display shows CAL Press ON/OFF/ZERO key once. Display shows calibration weight in normal mode. End Load calibration weight

soft steel handles. The keyboard has three easy to use function keys: ON/ZERO/OFF, TARE, RECALL. With the standard DC adaptor included and the 9V battery, the scale can be used in a fixed location or as a portable scale. zMODEL NUMBER: MS2300 zPOWER The baby scale uses 9V battery or 9V 100mA DC adapter. zLOW BATTERY 1. (Low battery indication) will display on LCD display when battery’s power is insufficient to power the scale. 2. When is displayed, the operator has to replace battery or plug in DC adaptor to instead of 9V battery. zSPECIFICATIONS 2 ϥ ϥ ϥ ϥ DISPLAY AND KEY FUNCTIONS Key function: 1. ON /ZERO/OFF: 1) Power on the scale. 2) Power off the scale by pressing 3 seconds. 3) Zero the scale (±2% of full capacity). 2. TARE : 1) Before weighing baby, the weight of any protective paper or napkin placed on the platform can be deducted by pressing the start switch and obtaining zero. Baby can then be weighed. 2) Press this key for 3 seconds to enter setting function mode. 3) In setting mode, this key means “select”. 3. RECALL: 1) Press this key to call the memory value and the arrow of “MR” will appear. (Meanwhile, the memory value will be cleared by software). 2) In setting mode, this key means “confirm”. 3) Disable the feature, please press ON/ZERO/OFF key. 3 Model# MS2300 Capacity 20 kg x 20g Weight units Kg Power Supply 9V battery / 9V 100mA DC adaptor Display Easy to read 1.0” LCD display with 4 1/2 active digits Operation Temperature 5к ~ 35к Function Key ON/ZERO/OFF,TARE, RECALL Dimensions Scale with handle: 24 x 14 x 2 in. (620 x 350 x 50 mm) Platform surface: 20 x 14 x 2 in. (500 x 350 x 50 mm)

ʳ ˈˁ Power on zero count under calibration zero –10% 6. Power on zero count over calibration zero +10% 5 1. LOW BATTERY If battery is discharged, the display will show LOW. The operator should replace the battery. 2. OVER ZERO If zero count is higher than the setting range, the display will show “Err” message. The scale will turn off in 30 seconds if the status continues. cocontinues. 4. OVERLOAD 3. UNDER ZERO If zero count is below the setting range, the display will show “Errl” message. The scale will turn off in 30 seconds if the status continues. If the total load exceeds the maximum capacity of the scale, the display will show “Err” message. The weight must be removed immediately from the surface.