NEC SL100 Programming Manual

without notice. NEC Corporation has prepared this document for use by its employees and customers. The informa- tion contained herein is the property of NEC Corporation and shall not be reproduced without prior writ- ten approval of NEC Corporation. Windows is a registered trademark of Microsoft Corporation. Copyright 2011 NEC Corporation Printed in Japan

Section 1 BEFORE YOU START PROGRAMMING .................................................... 1-1 Section 2 HOW TO USE THIS MANUAL ................................................................. 1-1 Section 3 HOW TO ENTER PROGRAMMING MODE .................................................. 1-2 Section 4 HOW TO EXIT PROGRAMMING MODE ..................................................... 1-3 Section 5 USING KEYS TO MOVE AROUND IN THE PROGRAMS ................................. 1-3 Section 6 PROGRAMMING NAMES AND TEXT MESSAGES ........................................ 1-4 Section 7 USING SOFTKEYS FOR PROGRAMMING ................................................. 1-5 Section 8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN ....................................... 1-5 Section 9 SYSTEM NUMBER PLAN/CAPACITIES ..................................................... 1-6 Section 10 CONCEPT OF SLOT NUMBER .............................................................. 1-9 Chapter 2 Programming the SL1000 Section 1 PROGRAMMING YOUR SYSTEM ............................................................ 2-1 Program 10 : System Configuration Setup 10-01 : Time and Date ................................................................................ 2-3 10-02 : Location Setup ............................................................................... 2-4 10-03 : ETU Setup .................................................................................... 2-5 10-04 : Music On Hold Setup ....................................................................... 2-11 10-06 : ISDN BRI Setup .............................................................................2-12 10-07 : Conversation Recording Resource ......................................................2-13 10-08 : Pre-Ringing Setup .......................................................................... 2-14 10-09 : DTMF and Dial Tone Circuit Setup .......................................................2-15 10-12 : CPU Network Setup ........................................................................2-16 10-13 : In-DHCP Server Setup .....................................................................2-18 10-14 : Managed Network Setup ..................................................................2-19 10-15 : Client Information Setup ...................................................................2-20 10-16 : Option Information Setup ..................................................................2-21 10-17 : H.323 Gatekeeper Setup ..................................................................2-24 10-18 : H.323 Alias Address Setup ................................................................2-25 10-19 : VoIPDB DSP Resource Selection ........................................................2-26 10-20 : LAN Setup for External Equipment .......................................................2-27 10-23 : SIP System Interconnection Setup .......................................................2-28 10-24 : Daylight Savings Setup ....................................................................2-29 10-25 : H.323 Gateway Prefix Setup ..............................................................2-30 10-26 : IP System Operation Setup ...............................................................2-31 10-28 : SIP System Information Setup ............................................................2-32 10-29 : SIP Server Information Setup .............................................................2-33 10-30 : SIP Authentication Information Setup ....................................................2-35 10-33 : SIP Registrar/Proxy Information Basic Setup ...........................................2-36 10-36 : SIP Trunk Registration Information Setup ...............................................2-37 10-37 : UPnP Setup ................................................................................. 2-38 10-39 : Fractional Setup ............................................................................ 2-39 10-40 : IP Trunk Availability .........................................................................2-40 10-42 : Virtual Loop Back Port Setting ............................................................2-41 10-45 : IP Routing Table Setup ....................................................................2-43 10-46 : DR700 Server Information Setup .........................................................2-43 10-48 : License Activation .......................................................................... 2-45 10-49 : License File Activation .....................................................................2-46 10-50 : License Information ........................................................................ 2-47 10-51 : PRI/T1/E1 Selection of PRI ...............................................................2-48 10-52 : Free/Demo License Information ..........................................................2-49 10-61 : Relay Port Setup ............................................................................2-52 TABLE OF CONTENTS Programming Manual i

10-63 : DHCP Client Setting ........................................................................2-52 Program 11 : System Numbering 11-01 : System Numbering ......................................................................... 2-53 11-02 : Extension Numbering ...................................................................... 2-59 11-04 : Virtual Extension Numbering ..............................................................2-60 11-07 : Department Group Pilot Numbers ........................................................2-61 11-09 : Trunk Access Code .........................................................................2-62 11-10 : Service Code Setup (for System Administrator) ........................................2-63 11-11 : Service Code Setup (for Setup/Entry Operation) .......................................2-66 11-12 : Service Code Setup (for Service Access) ...............................................2-69 11-14 : Service Code Setup (for Hotel) ...........................................................2-72 11-15 : Service Code Setup, Administrative (for Special Access) .............................2-74 11-16 : Single Digit Service Code Setup ..........................................................2-75 11-19 : Remote Conference Pilot Number Setup ................................................2-76 11-20 : Dial Extension Analyze Table .............................................................2-77 Program 12 : Night Mode Setup 12-01 : Night Mode Function Setup ...............................................................2-78 12-02 : Automatic Night Service Patterns ........................................................2-79 12-03 : Weekly Night Service Switching ..........................................................2-81 12-04 : Holiday Night Service Switching ..........................................................2-82 12-05 : Night Mode Group Assignment for Extensions .........................................2-83 12-06 : Night Mode Group Assignment for Trunks ..............................................2-84 12-07 : Text Data for Night Mode ..................................................................2-85 12-08 : Night Mode Service Range ................................................................2-86 Program 13 : Abbreviated Dialing 13-01 : Speed Dialing Option Setup ...............................................................2-87 13-02 : Group Speed Dialing Bins .................................................................2-88 13-03 : Speed Dialing Group Assignment for Extensions ......................................2-89 13-04 : Speed Dialing Number and Name .......................................................2-90 13-05 : Speed Dial Trunk Group ...................................................................2-92 13-06 : Speed Dial Number and Name ...........................................................2-93 13-11 : Abbreviated Dial Group Name ............................................................2-94 Program 14 : Trunk, Basic Setup 14-01 : Basic Trunk Data Setup ....................................................................2-95 14-02 : Analog Trunk Data Setup ..................................................................2-99 14-04 : Behind PBX Setup ........................................................................ 2-102 14-05 : Trunk Group ................................................................................2-103 14-06 : Trunk Group Routing ..................................................................... 2-104 14-07 : Trunk Access Map Setup ................................................................ 2-106 14-08 : Music on Hold Source for Trunks ....................................................... 2-108 14-09 : Conversation Recording Destination for Trunks ...................................... 2-109 14-11 : ID Setup for IP Trunk ......................................................................2-110 14-12 : SIP Register ID Setup for IP Trunk ......................................................2-111 14-15 : ISDN Call Forward Method ...............................................................2-112 14-16 : ISDN Call Transfer Method ...............................................................2-113 Program 15 : Extension, Basic Setup 15-01 : Basic Extension Data Setup .............................................................2-114 15-02 : Multiline Telephone Basic Data Setup ..................................................2-116 15-03 : Single Line Telephone Basic Data Setup .............................................. 2-122 15-05 : IP Telephone Terminal Basic Data Setup .............................................. 2-125 15-06 : Trunk Access Map for Extensions ...................................................... 2-128 15-07 : Programmable Function Keys .......................................................... 2-129 15-08 : Incoming Virtual Extension Ring Tone Setup ......................................... 2-135 15-09 : Virtual Extension Ring Assignment ..................................................... 2-136 TABLE OF CONTENTS Programming Manual ii

15-11 : Virtual Extension Delayed Ring Assignment .......................................... 2-138 15-12 : Conversation Recording Destination for Extensions ................................ 2-139 15-13 : Loop Keys ..................................................................................2-140 15-16 : SIP Register ID Setup for Extension ................................................... 2-141 15-17 : CO Message Waiting Indication ........................................................ 2-142 15-18 : Virtual Extension Key Enhanced Options ............................................. 2-143 15-22 : Mobile Extension Setup .................................................................. 2-144 Program 16 : Department Group Setup 16-01 : Department Group Basic Data Setup .................................................. 2-145 16-02 : Department Group Assignment for Extensions ....................................... 2-147 16-03 : Secondary Department Group .......................................................... 2-148 16-04 : Call Restriction Between Department Groups ........................................ 2-149 Program 20 : System Option Setup 20-01 : System Options ............................................................................2-150 20-02 : System Options for Multiline Telephones .............................................. 2-151 20-03 : System Options for Single Line Telephones .......................................... 2-153 20-04 : System Options for Virtual Extensions ................................................ 2-155 20-05 : System Options for Charging Cost Service ........................................... 2-156 20-06 : Class of Service for Extensions ......................................................... 2-157 20-07 : Class of Service Options (Administrator Level) ...................................... 2-158 20-08 : Class of Service Options (Outgoing Call Service) ................................... 2-160 20-09 : Class of Service Options (Incoming Call Service) ................................... 2-163 20-10 : Class of Service Options (Answer Service) ........................................... 2-165 20-11 : Class of Service Options (Hold/Transfer Service) .................................... 2-166 20-12 : Class of Service Options (Charging Cost Service) ................................... 2-169 20-13 : Class of Service Options (Supplementary Service) .................................. 2-170 20-14 : Class of Service Options for DISA/E&M ............................................... 2-174 20-15 : Ring Cycle Setup ......................................................................... 2-176 20-16 : Selectable Display Messages ........................................................... 2-178 20-17 : Operator Extension ........................................................................2-180 20-18 : Service Tone Timers ...................................................................... 2-181 20-19 : System Options for Caller ID ............................................................ 2-182 20-20 : Message Setup for Non-Caller ID Data ................................................ 2-183 20-21 : System Options for Long Conversation ............................................... 2-184 20-23 : System Options for CTI .................................................................. 2-185 20-25 : ISDN Options ...............................................................................2-186 20-26 : Multiplier for Charging Cost ............................................................. 2-188 20-28 : Trunk to Trunk Conversation ............................................................ 2-189 20-29 : Timer Class for Extension ............................................................... 2-190 20-30 : Timer Class for Trunks ................................................................... 2-191 20-31 : Timer Class Timer Assignment ......................................................... 2-192 20-34 : Remote Conference Group Setup ...................................................... 2-195 20-35 : Extension's Operator Setting ............................................................ 2-196 20-36 : Trunk's Operator Setting ................................................................. 2-197 20-37 : Operator Extension Group Setup ...................................................... 2-198 20-38 : Operator Group Setting .................................................................. 2-199 20-39 : Shortcut Operation Setup ............................................................... 2-200 20-40 : Function Key List Setup ................................................................. 2-201 20-41 : Service Code Setup ...................................................................... 2-202 20-42 : Night Mode for each package ........................................................... 2-203 20-43 : Power supply for each package ........................................................ 2-204 20-44 : Watch Mode Setup ....................................................................... 2-205 20-45 : Remote Watch Setup .................................................................... 2-206 20-46 : Security Sensor Setup ................................................................... 2-207 TABLE OF CONTENTS Programming Manual iii

20-48 : Time pattern setting for Security Sensor .............................................. 2-209 20-49 : Caller ID Shared Group Basic Data Setup ............................................ 2-210 Program 21 : Outgoing Call Setup 21-01 : System Options for Outgoing Calls .....................................................2-211 21-02 : Trunk Group Routing for Extensions ................................................... 2-214 21-03 : Trunk Group Routing for Trunks ........................................................ 2-215 21-04 : Toll Restriction Class for Extensions ................................................... 2-216 21-05 : Toll Restriction Class ..................................................................... 2-217 21-06 : Toll Restriction Table Data Setup ....................................................... 2-219 21-07 : Toll Restriction Override Password Setup ............................................. 2-221 21-08 : Repeat Dial Setup ........................................................................ 2-222 21-09 : Dial Block Setup .......................................................................... 2-223 21-10 : Dial Block Restriction Class Per Extension ........................................... 2-224 21-11 : Extension Ringdown (Hotline) Assignment ............................................ 2-225 21-12 : ISDN Calling Party Number Setup for Trunks ........................................ 2-226 21-13 : ISDN Calling Party Number Setup for Extensions ................................... 2-227 21-14 : Walking Toll Restriction Password Setup .............................................. 2-228 21-15 : Individual Trunk Group Routing for Extensions ....................................... 2-229 21-17 : IP Trunk (SIP) Calling Party Number Setup for Trunk ............................... 2-230 21-18 : IP Trunk (H.323) Calling Party Number Setup for Extension ....................... 2-231 21-19 : IP Trunk (SIP) Calling Party Number Setup for Extension .......................... 2-232 21-20 : SIP Trunk Call Discernment Setup for Extension .................................... 2-233 21-21 : Toll Restriction for Trunks (Seized Trunk Basis Setting) ............................. 2-234 21-22 : CO Message Waiting Indication - Call Back Settings ................................ 2-235 21-24 : Forced Access Dial Data ................................................................ 2-236 Program 22 : Incoming Call Setup 22-01 : System Options for Incoming Calls .................................................... 2-237 22-02 : Incoming Call Trunk Setup .............................................................. 2-239 22-03 : Trunk Ring Tone Range .................................................................. 2-240 22-04 : Incoming Extension Ring Group Assignment ......................................... 2-241 22-05 : Incoming Trunk Ring Group Assignment .............................................. 2-242 22-06 : Normal Incoming Ring Mode ............................................................ 2-243 22-07 : DIL Assignment ............................................................................2-244 22-08 : DIL/IRG No Answer Destination ........................................................ 2-245 22-09 : DID Basic Data Setup .................................................................... 2-246 22-10 : DID Translation Table Setup ............................................................ 2-247 22-11 : DID Translation Number Conversion ................................................... 2-248 22-12 : DID Intercept Ring Group ............................................................... 2-251 22-13 : DID Trunk Group to Translation Table Assignment .................................. 2-252 22-14 : VRS Delayed Message for IRG ......................................................... 2-253 22-15 : VRS Delayed Message for Department Group ....................................... 2-254 22-16 : Private Call Refuse Target Area Setup ................................................ 2-255 22-17 : Dial-In Conversion Table Area Setup for Time Pattern .............................. 2-256 22-18 : Private Call Assignment Setup .......................................................... 2-257 22-19 : DID MFC Dialing Options ................................................................ 2-258 22-20 : Flexible Ringing by Caller ID Setup .................................................... 2-259 Program 23 : Answer Features Setup 23-02 : Call Pickup Groups ....................................................................... 2-260 23-03 : Universal Answer/Auto Answer ......................................................... 2-261 23-04 : Ringing Line Preference for Virtual Extensions ...................................... 2-262 Program 24 : Hold/Transfer Setup 24-01 : System Options for Hold ................................................................. 2-263 24-02 : System Options for Transfer ............................................................ 2-264 24-03 : Park Group .................................................................................2-266 TABLE OF CONTENTS Programming Manual iv

24-05 : Department Group Transfer Target Setup ............................................. 2-268 24-09 : Call Forward Split Settings .............................................................. 2-269 Program 25 : VRS/DISA Setup 25-01 : VRS/DISA Line Basic Data Setup ...................................................... 2-270 25-02 : DID/DISA VRS Message ................................................................ 2-271 25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing ............................. 2-272 25-04 : VRS/DISA Transfer Ring Group With No Answer/Busy ............................. 2-273 25-05 : VRS/DISA Error Message Assignment ................................................ 2-274 25-06 : VRS/DISA One-Digit Code Attendant Setup .......................................... 2-275 25-07 : System Timers for VRS/DISA ........................................................... 2-276 25-08 : DISA User ID Setup ...................................................................... 2-278 25-09 : Class of Service for DISA Users ........................................................ 2-279 25-10 : Trunk Group Routing for DISA .......................................................... 2-280 25-11 : DISA Toll Restriction Class .............................................................. 2-281 25-12 : Alternate Trunk Group Routing for DISA .............................................. 2-282 25-13 : System Option for DISA ................................................................. 2-283 25-15 : DISA Transfer Target Setup ............................................................. 2-284 Program 26 : ARS Service & Least Cost Routing 26-01 : Automatic Route Selection (ARS/F-Route) Service ................................. 2-285 26-02 : Dial Analysis Table for ARS/LCR ....................................................... 2-286 26-03 : ARS Dial Treatments ..................................................................... 2-287 26-04 : ARS Class of Service .................................................................... 2-288 26-05 : LCR Carrier Table ........................................................................ 2-289 26-06 : LCR Authorization Code Table .......................................................... 2-290 26-07 : LCR Cost Center Code Table ........................................................... 2-291 26-08 : LCR Manual Override Access Code Table ............................................ 2-292 26-09 : LCR Manual Override Exemption Table ............................................... 2-293 26-11 : Transit Network ID Table ................................................................. 2-294 26-12 : Network Specific Parameter Table for ARS ........................................... 2-295 Program 30 : DSS/DLS Console Setup 30-01 : DSS Console Operating Mode .......................................................... 2-296 30-02 : DSS Console Extension Assignment .................................................. 2-297 30-03 : DSS Console Key Assignment .......................................................... 2-298 30-05 : DSS Console Lamp Table ............................................................... 2-303 Program 31 : Paging Setup 31-01 : System Options for Internal/External Paging ......................................... 2-305 31-02 : Internal Paging Group Assignment ..................................................... 2-307 31-03 : Internal Paging Group Settings ......................................................... 2-308 31-04 : External Paging Zone Group ............................................................ 2-310 31-05 : Universal Night Answer/Ring Over Page ...............................................2-311 31-06 : External Speaker Control ................................................................ 2-312 31-07 : Combined Paging Assignments ........................................................ 2-313 31-08 : BGM on External Paging ................................................................ 2-314 31-10 : External Paging Group Basic Setting .................................................. 2-315 Program 32 : Door Box and Sensor Setup 32-01 : Door Box Timers Setup .................................................................. 2-316 32-02 : Door Box Ring Assignment .............................................................. 2-317 32-03 : Door Box Basic Setup .................................................................... 2-318 32-04 : Door Box Name Setup ................................................................... 2-319 Program 34 : Tie Line Setup 34-01 : E&M Tie Line Basic Setup ............................................................... 2-320 34-02 : E&M Tie Line Class of Service .......................................................... 2-321 34-03 : Trunk Group Routing for E&M Tie Lines ............................................... 2-322 34-04 : E&M Tie Line Toll Restriction Class .................................................... 2-323 TABLE OF CONTENTS Programming Manual v

34-06 : Add/Delete Digit for E&M Tie Line ...................................................... 2-325 34-07 : E&M Tie Line Timer ....................................................................... 2-326 34-08 : Toll Restriction Data for E&M Tie Lines ................................................ 2-327 34-09 : ANI/DNIS Service Options .............................................................. 2-328 34-11 : E1 Trunk Basic Setup .................................................................... 2-331 Program 35 : SMDR Account Code Setup 35-01 : SMDR Options .............................................................................2-332 35-02 : SMDR Output Options ................................................................... 2-333 35-03 : SMDR Port Assignment for Trunk Group .............................................. 2-336 35-04 : SMDR Port Assignment for Department Groups ..................................... 2-337 35-05 : Account Code Setup ..................................................................... 2-338 35-06 : Verified Account Code Table ............................................................ 2-339 Program 40 : Voice Recording System 40-01 : Voice Mail Basic Setup ................................................................... 2-340 40-07 : Voice Prompt Language Assignment for VRS ........................................ 2-341 40-10 : Voice Announcement Service Option .................................................. 2-342 40-11 : Preamble Message Assignment ........................................................ 2-344 Program 42 : Hotel Setup 42-01 : System Options for Hotel/Motel ........................................................ 2-345 42-02 : Hotel/Motel Telephone Setup ........................................................... 2-346 42-03 : Class of Service Options (Hotel/Motel) ................................................ 2-347 42-04 : Hotel Mode One-Digit Service Codes ................................................. 2-348 42-05 : Hotel Room Status Printer ............................................................... 2-349 42-08 : Text Message Setup for Hotel Room Status .......................................... 2-350 Program 44 : ARS/F-Route Setup 44-01 : System Options for ARS/F-Route ...................................................... 2-352 44-02 : Dial Analysis Table for ARS/F-Route Access ......................................... 2-353 44-03 : Dial Analysis Extension Table ........................................................... 2-355 44-04 : ARS/F-Route Selection for Time Schedule ........................................... 2-356 44-05 : ARS/F-Route Table ........................................................................2-357 44-06 : Additional Dial Table ...................................................................... 2-359 44-07 : Gain Table for ARS/F-Route Access ................................................... 2-360 44-08 : Time Schedule for ARS/F-Route ....................................................... 2-361 44-09 : Weekly Schedule for ARS/F-Route .................................................... 2-362 44-10 : Holiday Schedule for ARS/F-Route .................................................... 2-363 Program 45 : Voice Mail Integration 45-01 : Voice Mail Integration Options .......................................................... 2-364 45-02 : NSL Option Setup ........................................................................ 2-366 45-04 : Voice Mail Digit Add Assignment ....................................................... 2-367 45-05 : Voice Mail Send Protocol Signal Without Additional Digits ......................... 2-368 Program 47 : InMail 47-01 : InMail System Options ................................................................... 2-369 47-02 : InMail Station Mailbox Options ......................................................... 2-373 47-03 : InMail Group Mailbox Options .......................................................... 2-377 47-06 : Group Mailbox Subscriber Options .................................................... 2-378 47-07 : InMail Routing Mailbox Options ........................................................ 2-382 47-08 : Call Routing Mailbox Options ........................................................... 2-384 47-09 : Announcement Mailbox Options ........................................................ 2-386 47-10 : InMail Trunk Options ..................................................................... 2-387 47-11 : InMail Answer Table Options ............................................................ 2-389 47-12 : InMail Answer Schedules ................................................................ 2-392 47-13 : InMail Dial Action Tables ................................................................. 2-396 47-15 : Routing Directory Mailbox Options ..................................................... 2-399 47-17 : Routing Distribution Mailbox Options .................................................. 2-400 TABLE OF CONTENTS Programming Manual vi

47-19 : InMail POP3 Setup ....................................................................... 2-402 47-20 : Station Mailbox Message Notification Options ....................................... 2-403 47-21 : Station Mailbox Find-Me Follow-Me Options ......................................... 2-404 47-22 : Group Mailbox Message Notification Options ........................................ 2-405 47-23 : Group Mailbox Find-Me Follow-Me Options .......................................... 2-406 Program 80 : Basic Hardware Setup for System 80-01 : Service Tone Setup ....................................................................... 2-407 80-02 : DTMF Tone Setup ........................................................................ 2-412 80-03 : DTMF Tone Receiver Setup ............................................................. 2-413 80-04 : Call Progress Tone Detector Setup .................................................... 2-415 80-05 : Date Format for SMDR and System ................................................... 2-417 80-06 : Reference Impedance Setup ........................................................... 2-418 80-07 : Call Progress Tone Detector Frequency Setup ....................................... 2-419 80-08 : MFC Tone Setup .......................................................................... 2-420 80-09 : Short Ring Setup ......................................................................... 2-421 80-11 : MFC Tone Receiver Setup ............................................................... 2-423 80-12 : Caller ID Receiver Setup ................................................................ 2-425 Program 81 : Basic Hardware Setup for Trunk 81-01 : CO Initial Data Setup ..................................................................... 2-426 81-04 : ISDN BRI Layer 1 (T-Point) Initial Data Setup ........................................ 2-428 81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup ................................ 2-429 81-06 : ISDN BRI & PRI Layer 3 (T-Point) Timer Setup ...................................... 2-430 81-07 : CODEC Filter Setup for Analog Trunk Port ........................................... 2-432 81-08 : T1 Trunk Timer Setup .................................................................... 2-433 81-09 : COT CODEC (QSLAC) Filter Setting .................................................. 2-436 81-13 : E1 Trunk Timer Setup .................................................................... 2-438 Program 82 : Basic Hardware Setup for Extension 82-01 : Incoming Ring Tone ...................................................................... 2-440 82-02 : Key Telephone LED Pattern Setup ..................................................... 2-442 82-04 : ASTU Initial Data Setup .................................................................. 2-444 82-05 : ISDN BRI & PRI Layer2 (S-Point) Initial Data Setup ................................. 2-445 82-06 : ISDN BRI & PRI Layer3 (S-point) Timer Setup ....................................... 2-446 82-07 : CODEC Filter Setup for Analog Station Port .......................................... 2-447 82-08 : Sidetone Volume Setup .................................................................. 2-448 82-09 : SLIU CODEC Filter Data Setup ........................................................ 2-449 82-13 : Volume Level Data Setup for TXD TEL2 [LKTS] ..................................... 2-451 82-14 : Handset/Headset Gain Setup for Multi Line Telephone ............................. 2-452 82-18 : KST CODEC Filter Data Setup ......................................................... 2-453 82-19 : KST CODEC Filter Data Setup ......................................................... 2-454 82-20 : Volume level Data Setup for KST ....................................................... 2-456 82-21 : Sensor Setup ...............................................................................2-457 Program 84 : Hardware Setup for VoIPDB 84-01 : H.323 Trunk Basic Information Setup .................................................. 2-458 84-02 : H.225 and H.245 Information Basic Setup ............................................ 2-460 84-07 : Firmware Download Setup .............................................................. 2-462 84-09 : VLAN Setup ................................................................................2-463 84-10 : ToS Setup ...................................................................................2-464 84-13 : SIP Trunk CODEC Information Basic Setup .......................................... 2-465 84-14 : SIP Trunk Basic Information Setup ..................................................... 2-468 84-15 : H.323/SIP Phone Keep Alive Setup .................................................... 2-469 84-16 : VoIPDB Limiter Control Gain Setup .................................................... 2-470 84-19 : SIP Extension CODEC Information Basic Setup ..................................... 2-471 84-20 : SIP Extension Basic Information Setup ............................................... 2-474 84-22 : DR700 Multiline Logon Information Setup ............................................ 2-475 TABLE OF CONTENTS Programming Manual vii

84-24 : DR700 Multiline CODEC Basic Information Setup ................................... 2-478 84-26 : VoIP Basic Setup (DSP) ................................................................. 2-480 84-27 : VoIP Basic Setup ......................................................................... 2-481 84-28 : DR700 Multiline Firmware Name Setup ............................................... 2-483 84-29 : SIP-MLT CODEC Information Fixed Mode Setup .................................... 2-484 84-31 : VoIPDB Echo Canceller Setup .......................................................... 2-485 Program 90 : Maintenance Program 90-01 : Installation Date ............................................................................2-488 90-02 : Programming Password Setup ......................................................... 2-489 90-03 : Save Data ...................................................................................2-491 90-04 : Load Data ...................................................................................2-492 90-05 : Slot Control .................................................................................2-493 90-06 : Trunk Control ...............................................................................2-494 90-07 : Station Control .............................................................................2-495 90-08 : System Reset ..............................................................................2-496 90-09 : Automatic System Reset Time Setup .................................................. 2-497 90-10 : System Alarm Setup ...................................................................... 2-498 90-11 : System Alarm Report ..................................................................... 2-504 90-12 : System Alarm Output .................................................................... 2-505 90-13 : System Information Output .............................................................. 2-506 90-16 : Main Software Information .............................................................. 2-507 90-17 : Firmware Information .....................................................................2-508 90-19 : Dial Block Release ....................................................................... 2-509 90-20 : Traffic Report Data Setup ................................................................ 2-510 90-21 : Traffic Report Output ......................................................................2-511 90-23 : Deleting Registration of IP Telephones ................................................ 2-512 90-24 : System Alarm Report Notification Time Setup ........................................ 2-513 90-25 : System Alarm Report CC Mail Setup .................................................. 2-514 90-26 : Program Access Level Setup ........................................................... 2-515 90-28 : User Programming Password Setup ................................................... 2-516 90-31 : DIM Access over Ethernet ............................................................... 2-517 90-33 : Preselected Data Setup ................................................................. 2-518 90-34 : Firmware Information .....................................................................2-536 90-35 : Wizard Programming Level Setup ..................................................... 2-537 90-36 : Firmware Update Time Setting ......................................................... 2-538 90-38 : User Programming Data Level Setup .................................................. 2-539 90-39 : Virtual Loop Back Port Reset ........................................................... 2-542 90-41 : Server Setting to Update Terminal Local Data ........................................ 2-543 90-42 : DR700 Multiline Terminal Version Information ........................................ 2-544 90-43 : Deleting Terminal License of DR700 ................................................... 2-545 90-44 : Deleting Terminal License of TCP Interface ........................................... 2-546 90-45 : Temporary Password Change for Multiline Telephone .............................. 2-547 90-50 : System Alarm Display Setup ............................................................ 2-548 90-51 : Alarm Setup for Maintenance Exchange .............................................. 2-549 90-52 : System Alarm Save ...................................................................... 2-550 90-53 : System Alarm Clear ...................................................................... 2-551 90-54 : PC/Web Programming ....................................................................2-552 90-55 : Free License Select ...................................................................... 2-553 90-56 : NTP Setup ..................................................................................2-554 90-57 : Backup Recovery Data .................................................................. 2-555 90-58 : Restore Recovery Data .................................................................. 2-556 90-59 : Delete Recovery Data .................................................................... 2-557 90-60 : T1/ISDN Layer Status Information ..................................................... 2-558 90-63 : DR700 Control .............................................................................2-559 TABLE OF CONTENTS Programming Manual viii

90-66 : FTP Firmware Update setup ............................................................ 2-561 90-67 : Backup Data Auto-save Interval Time Set ............................................. 2-563 90-68 : Side Tone Auto Setup .................................................................... 2-563 Program 92 : Copy Program 92-01 : Copy Program ..............................................................................2-564 92-02 : Delete All Extension Numbers .......................................................... 2-567 92-03 : Copy Program by Port Number ......................................................... 2-568 92-04 : Extension Data Swap .................................................................... 2-569 92-05 : Extension Data Swap Password ....................................................... 2-571 92-06 : Fill Command ..............................................................................2-572 92-07 : Delete Command ..........................................................................2-573 TABLE OF CONTENTS Programming Manual ix

Table 1-2 Keys for Entering Names ....................................................................... 1-4 Table 1-3 Softkey Display Prompts ....................................................................... 1-5 Table 1-4 System Number Plan/Capacities .............................................................. 1-6 Table 2-1 System Numbering Default Settings .........................................................2-54 Table 2-2 Function Number List ........................................................................ 2-130 Table 2-3 Function Number List ........................................................................ 2-133 Table 2-4 Ringing Cycles .................................................................................2-176 Table 2-5 Program 22-03 - Incoming Signal Frequency Patterns ................................. 2-240 Table 2-6 Function Number List .........................................................................2-298 Table 2-7 Function Number List .........................................................................2-301 Table 2-8 47-02-16 Default Table .......................................................................2-376 Table 2-9 47-06-14 Default Table .......................................................................2-380 Table 2-10 47-07-03 Default Table ......................................................................2-383 Table 2-11 47-10-03 Default Table ......................................................................2-388 Table 2-12 Basic Tones ...................................................................................2-407 Table 2-13 Frequency 1/2 Table .........................................................................2-421 Table 2-14 Ring Cycle Table .............................................................................2-421 Table 2-15 Default Table ..................................................................................2-422 Table 2-16 Default Table ..................................................................................2-423 Table 2-17 Description of Alarm .........................................................................2-498 LIST OF TABLES Programming Manual x

Before customizing your system be sure to read this chapter first. This chapter provides you with detailed information about the system programs. By changing a pro- gram, you change the way the feature associated with that program works. In this chapter, you find out about each program, the features that the program affects and how to enter the program data into sys- tem memory. This Manual is created for System : SL1000 SECTION 2 HOW TO USE THIS MANUAL This section lists each program in numerical order. For example, Program 10-01 is at the beginning of the section and Program 92-01 is at the end. The information on each program is subdivided into the following headings : Description describes what the program options control. The Default Settings for each program are also included. When you first install the system, it uses the Default Setting for all programs. Along with the Description are the Conditions which describe any limits or special considerations that may apply to the program. The program access level is just above the Description heading. You can only use the program if your access level meets or exceeds the level the program requires. Refer to How to Enter Programming Mode on the next page for a list of the system access levels and passwords. Feature Cross Reference provides you with a table of all the features affected by the program. You will want to keep the referenced features in mind when you change a program. Customizing a feature may have an effect on another feature that you did not intend. Telephone Programming Instructions shows how to enter the program data into system memory. For example : 1 Enter the programming mode. Introduction 1 Introduction Programming Manual 1-1

will see the message “15-07-01 TEL” on the first line of the telephone display. This indicates the pro- gram number (15-07), item number (01), and that the options are being set for the extension. The sec- ond row of the display “KY01 =* 01” indicates that Key 01 is being programmed with the entry of* 01. The third row allows you to move the cursor to the left or right, depending on which arrow is pressed. To learn how to enter the programming mode, refer to How to Enter Programming Mode on this page. SECTION 3 HOW TO ENTER PROGRAMMING MODE To enter programming mode : 1 Go to any working display telephone. In a newly installed system, use extension (port 1). 2 Do not lift the handset. 3 Press Speaker. 4 #* #* . 5 Dial the system password + Hold. Refer to the following table for the default system passwords. To change the passwords, use 90-02 : Programming Password Setup on page 2-489. Password User Name Level Programs at this Level ****** nec-i 1 (MF) Manufacture Level (MF) : 80-02, 81-04, 81-05, 82-02, 82-05 12345678 tech 2 (IN) Installation (IN) : All programs in this section not listed for MF, SA, & SB 0000 admin1 3 (SA) System Administrator - Level 1 (SA) : 10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-23, 10- 24, 10-25, 10-28, 10-29, 10-45, 12-02, 12-03, 12-04, 12-08, 15-01, 15-07, 15-09, 15-10, 15-11, 20-16, 20-34, 21-07, 21-14, 22-04, 22-11, 22-17, 25- 08, 30-03, 30-04, 32-02, 45-02, 84-22, 90-03, 90-04, 90-06, 90-07, 90-19, 90-57, 90-58, 90-59, 90-65 9999 admin2 4 (SB) System Administrator - Level 2 (SB) : 13-04, 13-05, 13-06, 13-11, 21-20 15-07-01 TEL200 KY01 = *01 (Multiline Telephone) 15-07-01 TEL KY01 = *01 - + (IP Phone) (Version 1.5) Program Mode ISSUE 1.1 SL1000 Introduction 1-2

To-exit the programming mode : When you are done programming, you must be out of a program option to exit (pressing the Mute key will exit the program option). 1 Press Mute key to exit the program options, if needed. 2 Press Speaker. If changes were to the system programming, "Saving System Data" is displayed. 3 The display shows "Complete Data Save" when completed and exits the telephone to an idle mode. To save a customer’s database, a blank Compact Flash (CF) Card is required. Insert the CF Card into the CPU and, using Program 90-03, save the software to the CF Card. (Program 90-04 is used to reload the customer data if necessary.) Note that a CF Card can only hold one customer database. Each database to be saved re- quires a separate drive. CF card CF Slot (CN2) CPU card VMDB-C1 SECTION 5 USING KEYS TO MOVE AROUND IN THE PROGRAMS Once you enter the programming mode, use the keys in the following chart to enter data, edit data and move around in the menus. Table 1-1 Keys for Entering Data When you want to ... Telephone Programming Enter Data into program 0 ~ 9,* , #, Line Key (1 ~ 6) Next Index Cursor Key (Up) Prior Index Cursor Key (Down) Select Data Line Key (1 ~ 6) Program Mode ISSUE 1.1 SL1000 Programming Manual 1-3

Telephone Programming All Clear Flash Register Hold Enter Go Back to Prior Screen Mute Clear / Back Move Cursor Jump Up/Down DND (V1.5 Added) or DND / CONF Delete single character Clear / Back Next Page - Toggle between Number/Character Help While in a Entering Number Prior Page - Quit the programming Speaker Exit Move Cursor to Left Cursor Key (Left) Change Program Number - Change Index Number Change Program Number - Change Index Number Move Cursor to Right Cursor Key (Right) SECTION 6 PROGRAMMING NAMES AND TEXT MESSAGES Several programs (e.g., Program 20-16 : Selectable Display Messages) require you to enter text. Use the following chart when entering and editing text. When using the keypad digits, press the key once for the first character, twice for the second character, etc. For example, to enter a C, press the key 2 three times. Press the key six times to display the lower case letter. The name can be up to 12 digits long. Table 1-2 Keys for Entering Names Use this keypad digit ... When you want to ... 1 Enter characters : 1 @ [ ¥ ] ^ _ ` { | } Á À Â Ã Å Æ Ç É Ê ì ó 0 2 Enter characters : A-C, a-c, 2. 3 Enter characters : D-F, d-f, 3. 4 Enter characters : G-I, g-i, 4. 5 Enter characters : J-L, j-l, 5. 6 Enter characters : M-O, m-o, 6. 7 Enter characters : P-S, p-s, 7. 8 Enter characters : T-V, t-v, 8. 9 Enter characters : W-Z, w-z, 9. 0 Enter characters : 0 ! “ # $ % & ’ ( ) ô õ ú å ä æ ö ü α ε θ В * Enter characters :* + , - . / : ; < = > ? π Σ σ Ω ∞¢ £ # # = Accepts an entry (only required if two letters on the same key are needed - ex : TOM). Pressing # again = Space. (In system programming mode, use the right arrow Softkey instead to accept and/or add a space.) ISSUE 1.1 SL1000 Introduction 1-4

When you want to ... Clear/Back Clear the character entry one character at a time. Flash Clear all the entries from the point of the flashing cursor and to the right. SECTION 7 USING SOFTKEYS FOR PROGRAMMING (This Feature is available for V1.5 IP Phone Only.) Each Display telephone with Softkeys provides interactive Softkeys for intuitive feature access. The options for these keys will automatically change depending on where you are in the system program- ming. Simply press the Softkey located below the option you wish and the display will change accord- ingly. Pressing the Cursor key Up or Down will scroll between the menus. SECTION 8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN (This Feature is available for V1.5 IP Phone Only.) When using a display telephone in programming mode, various Softkey options are displayed. These keys will allow you to easily select, scan, or move through the programs. Table 1-3 Softkey Display Prompts Softkey Display Prompts If you press this Softkey ... The system will ... back Go back one step in the program display. You can press Cursor Key (UP) or Cursor Key (Down) to scroll forward or backward through a list of programs. Scroll down through the available programs. Scroll up through the available programs. select Select the currently displayed program. Move the cursor to the left. Move the cursor to the right. - 1 Move back through the available program options. _ Program Mode Base Service OP1 OP2 _ Program Mode Hard Mtnance ISSUE 1.1 SL1000 Programming Manual 1-5

If you press this Softkey ... The system will ... + 1 Move forward through the available program options. SECTION 9 SYSTEM NUMBER PLAN/CAPACITIES The following table provides the capacities for the SL1000 system. Table 1-4 System Number Plan/Capacities System Number Plan/Capacities Note System Type Number Plan/Capacities Related Pro- gram System Analog Caller ID Detector (de- tected by DSP) 132 channels Classes of Service 15 20–06 Day/Night Mode Numbers 8 12–07 Day/Night Service Patterns 4 12–07 Dial Tone Detector DTMF Receiver 132 Toll Restriction Classes 15 Verifiable Account Code Table 800 35–06 Trunk Trunk Port Number 126 Trunk Ports (Total) : 126 • Analog Trunks 48 • BRI Trunk Ports 36 • T1/E1/PRI Trunk Ports 90 • VoIPDB Trunk Ports (VoIPDB & MEMDB is re- quired. Need license to be Max.) 16 • External Paging (Use Analog Trunk ports) 3 • External MOH (Use Analog Trunk ports) 1 • BGM Trunk Port (Use Analog Trunk ports) 1 DID Translation Tables 20 22–10 DID Translation Table Entries 800 22–10 DISA : • Classes of Service • Users 15 15 20–14 25–09 Ring Groups 25 22–04 Trunk Access Maps 126 14–07 Trunk Group Numbers 25 14–05 ISSUE 1.1 SL1000 Introduction 1-6

Note System Type Number Plan/Capacities Related Pro- gram Trunk Routes 25 14–06 Extension Telephone Extension Ports 128 • Multiline Terminals 96 • Single Line Phones/Analog Devices 128 • VoIPDB Extensions (SIP- MLT/Std) (VoIPDB & MEMDB is re- quired. Need license to be Max. (SIP-Std)) 32 Hybrid Extension Ports: • Physical Ports 01 ~ 08 Telephone Extension Number Range 1 ~ 8999* (* Extension cannot start with 0 or 9) Virtual Extension Ports 50 11–04 Virtual Extension Number Range 1 ~ 8999* (* Extension cannot start with 0 or 9) 11–04 Door Boxes 8 32–02 Door Box Numbers 1 ~ 8 32–02 DSS Consoles Numbers : • 60 Button DSS Console 12 30–01 Operator Access Number 0 (Default) Operator Extension 15 Speed Dialing Speed Dialing Groups 32 13–02 Speed Dialing Bins 0 ~ 999 13–02 Speed Dialing Table-Common 900 13–01–03 Automated Attendant VRS Message Numbers 1 ~ 100 25–06 Conference Conference Circuits 32 : maximum (16 Parties Per Conference) Department and Pickup Groups Department (Extension) Group Numbers 1 ~ 32 16–01 Call Pickup Group Numbers 1 ~ 32 23–02 Hotline Internal Hotline 128 External Hotline 128 Paging and Park Internal Page Group Numbers 0, 01 ~ 32 31–02 External Page Group Numbers 1 ~ 3 31–04 External Speakers 1 ~ 3 31–04 ISSUE 1.1 SL1000 Programming Manual 1-7

Note System Type Number Plan/Capacities Related Pro- gram Park Group Numbers 1 ~ 64 24–03 Park Orbits 1 ~ 64 24–03 SMDR SMDR Ports 1 ~ 2 35–03 VRS/VM InMail VRS/VM InMail 1 VRS/VM Ports (Need license and MEMDB) 16 VRS Port (Need MEMDB) 16 VRS Attendant Messages 3 VRS Recordable Messages 100 40–10–02 VRS Ports 16 VoIPDB RTP Ports 0 ~ 65534 RTCP Ports 0 ~ 65535 DSP Resources 16 Passwords Programming Passwords : Level 1 (MF) PCPro/WebPro User Name : ****** nec-i Level 2 (IN) PCPro/WebPro User Name : 12345678 tech Level 3 (SA) PCPro/WebPro User Name : 0000 admin1 Level 4 (SB) PCPro/WebPro User Name : 9999 admin2 Programming Password Users 8 Extension numbers can be one to eight digits long. Refer to the Flexible System Numbering feature in the SL1000 Features and Specifications Manual. SL1000 needs Power Calculation depending on the system configuration. ISSUE 1.1 SL1000 Introduction 1-8

Each unit installed to the system has a slot number assigned. Some of slot number are fixed to a unit that be installed. For example, VoIP has a Slot 0 assigned. (Version 1.5) Other slots are not fixed to unit but fixed to location where it is installed. Below chart shows the slot and its number : Expansion KSU 1-3 Slot 0 Base Unit Main KSU Slot 1 Base Unit Slot 2 2nd Unit Slot 3 3rd Unit Slot 4 4th Unit C P U E X I F E Slot 5/9/13 Base Unit Slot 6/10/14 2nd Unit Slot 7/11/15 3rd Unit Slot 8/12/16 4th Unit ISSUE 1.1 SL1000 Programming Manual 1-9

The information contained in this chapter provides the information necessary to properly program your system. The programming blocks are organized into the following programming modes. Program Number : Program Name Program 10 : System Configuration Setup on page 2-3 Program 11 : System Numbering on page 2-53 Program 12 : Night Mode Setup on page 2-78 Program 13 : Abbreviated Dialing on page 2-87 Program 14 : Trunk, Basic Setup on page 2-95 Program 15 : Extension, Basic Setup on page 2-114 Program 16 : Department Group Setup on page 2-145 Program 20 : System Option Setup on page 2-150 Program 21 : Outgoing Call Setup on page 2-211 Program 22 : Incoming Call Setup on page 2-237 Program 23 : Answer Features Setup on page 2-260 Program 24 : Hold/Transfer Setup on page 2-263 Program 25 : VRS/DISA Setup on page 2-270 Program 26 : ARS Service & Least Cost Routing on page 2-285 Program 30 : DSS/DLS Console Setup on page 2-296 Program 31 : Paging Setup on page 2-305 Program 32 : Door Box and Sensor Setup on page 2-316 Program 34 : Tie Line Setup on page 2-320 Program 35 : SMDR Account Code Setup on page 2-332 Program 40 : Voice Recording System on page 2-340 Program 42 : Hotel Setup on page 2-345 Program 44 : ARS/F-Route Setup on page 2-352 Program 45 : Voice Mail Integration on page 2-364 Program 47 : InMail on page 2-369 Program 80 : Basic Hardware Setup for System on page 2-407 Programming the SL1000 2 Programming the SL1000 Programming Manual 2-1

Program 81 : Basic Hardware Setup for Trunk on page 2-426 Program 82 : Basic Hardware Setup for Extension on page 2-440 Program 84 : Hardware Setup for VoIP on page 2-458 Program 90 : Maintenance Program on page 2-488 Program 92 : Copy Program on page 2-564 ISSUE 1.1 SL1000 Programming the SL1000 2-2

10-01 : Time and Date Level SA Description Use Program 10-01 : Time and Date to change the system Time and Date through system program- ming. Extension users can also dial Service Code 828 to change the time if allowed by an extension Class of Service. Input Data Item No. Item Input Data Default Description 01 Year 07 ~ 96 No setting Enter 2 digits for year (07 ~ 96). 02 Month 01 ~ 12 No setting Enter 2 digits (01 ~ 12) for the month. 03 Day 01 ~ 31 No setting Enter 2 digits (01 ~ 31) for the day. 04 Week 1 ~ 7 (Sun ~ Sat) No setting Enter digit for the day of the week (1 = Sunday, 7 = Saturday). 05 Hour 00 ~ 23 No setting Enter 2 digits for the hour (00 ~ 23). 06 Minute 00 ~ 59 No setting Enter 2 digits for the minute (00 ~ 59). 07 Second 00 ~ 59 No setting Enter 2 digits for the second (00 ~ 59). Conditions None Feature Cross Reference • Clock/Calendar Display/Time and Date ISSUE 1.1 SL1000 Program 10 Programming Manual 2-3

10-02 : Location Setup Level SA Description Use Program 10-02 : Location Setup to define the location of the installed system. Input Data Item No. Item Input Data Default Description 01 Country Code Dial (up to four digits) : 0 ~ 9,* , # No setting Enter the country code. 02 International Access Code Dial (up to four digits) : 0 ~ 9,* , # 00 Enter the international access code. 03 Other Area Ac- cess Code Dial (up to two digits) : 0 ~ 9,* , # 0 Enter the other area access code. 04 Area Code Dial (up to six digits) : 0 ~ 9,* , # No setting Enter the local area code. 05 Trunk Access Code Dial (up to eight digits) : 0 ~ 9,* , # No setting Enter the trunk access code digits required to place an outgoing call. Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-4

10-03 : ETU Setup Level IN Description Use Program 10-03 : ETU Setup to setup and confirm the Basic Configuration data for each unit. When changing a defined terminal type, first set the type to 0 and then plug the new device in to have the system automatically define it or you may have to reseat the unit. The items highlighted in gray are read only and cannot be changed. Input Data For HBI PKG Setup Physical Port Number 01 ~ 08 Item No. Item Input Data Default 01 Terminal Type 0 = No setting 1 = Multi-Line Telephone 2 = SLT 8 = Door Phone 10 = DSS Console 3 ~ 7, 9, 11, 12 = Not Used 2 02 Logical Port Number 1 ~ 128 03 Transmit Gain level for SLT 1 ~ 63 (- 15.5 ~ + 15.5dB) 32 04 Receive Gain level for SLT 1 ~ 63 (- 15.5 ~ + 15.5dB) 32 05 Select port type 0 = Hybrid Port 1 = Door Phone 0 06 Multi-Line Telephone Line 0 = None 1 = 12 Line 2 = 24 Line For COIU Unit Setup Physical Port Number 1 ~ 4 Item No. Item Input Data Default Note 01 Logical Port Number 1 ~ 48 0 02 Select port type 0 = Trunk 1 = Audio Port 0 For BRIU PKG Setup ISDN Line Number 01 ~ 02 Item No. Item Input Data Default Note 01 ISDN Line Mode 0 = No setting 1 = T-Point 2 = S-Point 3 ~ 5= Not Used 6 = S-Point (Leased Line) 1 ISSUE 1.1 SL1000 Program 10 Programming Manual 2-5

The starting port num- ber of a BRI line is dis- played. Two logic ports are automatically as- signed to a BRI line. [0 : No setting] = 0 [1 : T-Point] = 1 ~ 126 [2 : S-Point] = 1 ~ 128 [3 ~ 5] = Not Used [6 : S-Point (Leased Line)] = 1 ~ 128 0 (V1.5 Changed) 03 Connection Type 0 = Point-to-Multipoint 1 = Point-to-Point 0 04 Layer 3 Timer Type Each timer value of Layer 3 is set up for ev- ery type using Program 81-06 (T-Bus). 1 ~ 5 1 05 CLIP Information Announce- ment Based on this setting, the system includes a Presentation Allowed (1) or Presentation Restricted (0) in the Setup message to allow or deny the Calling Party Number. Program 15-01-04 must also be set to 1 if this option is enabled. 0 = No 1 = Yes 1 06 Connection Bus Mode 0 = Extended passive bus 1 = Short passive bus 0 07 S-point DDI digits 0 ~ 4 0 08 Dial Sending Mode ISDN Protocol definition 0 = Enblock Sending 1 = Overlap Sending 1 09 Dial Information Element ISDN Protocol definition [Only when Dialing Sending Mode (10-03-08) is set for 1 (Overlap Sending] 0 = Keypad Facility 1 = Called Party Number 1 10 Master/Slave System If set to 0, system is synchro- nized to network clock. If set to 1, system is not synchronized to the network clock. 0 = Slave System 1 = Master System 0 (V1.5 Deleted) 11 Networking System No. 0 ~ 50 0 (V1.5 Deleted) 14 Service Protocol for S-point 0 = Keypad facility 1 = Specified Protocol for Aspire system 0 15 Call Busy Mode for S-point 0 = Alerting 1 = Disconnect 0 17 ISDN Line Ringback Tone System can provide ringback tone, if set to 1 : Enable. 0 = Disable 1 = Enable 0 18 Type of Number ISDN Protocol definition 0 = Unknown 1 = International number 2 = National number 3 = Network specific number 4 = Subscriber number 5 = Abbreviated number 0 19 Numbering Plan Identification ISDN Protocol definition 0 = Unknown 1 = ISDN numbering plan 2 = Data numbering plan 3 = Telex numbering plan 4 = National standard numbering plan 5 = Private numbering plan 0 ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-6

0 = Disable 1 = Enable 0 (V1.5 Deleted) 24 Power feeding for S-point 0 = Disable 1 = Enable 0 For PRIU PKG Setup ISDN Line Number 01 ~ 30 Item No. Item Input Data Default Note 01 ISDN Line Mode 0 = No setting 1 = T-Point 2 = S-Point 6 = S-Point (Leased Line) 1 02 Logical Port Number The start port number of a PRI line is displayed. [0 : No setting] = 0 [1 : T-Point] = 1 ~ 126 [2 : S-Point] = 1 ~ 128 [6 : S-Point (Leased Line)] = 1 ~ 128 0 03 CRC Multi-frame (CRC4) (Only for 2M = 30ch Mode) 0 = off 1 = on 1 04 Layer 3 Timer Type Each timer value of Layer 3 is set up for each type in Program 81-06 (T-Bus) 1 ~ 5 1 05 CLIP Information Based on this setting, the system includes a Presentation Allowed (1) or Presentation Restricted (0) in the Setup message to allow or deny the Calling Party Number. Program 15-01-04 must also be set to 1 if this option is enabled. 0 = No 1 = Yes 1 06 Length of Cable 0 = Level 1 1 = Level 2 2 = Level 3 3 = Level 4 4 = Level 5 2 07 S-point DDI digits 0 - 4 0 08 Dial Sending Mode ISDN Protocol definition 0 = Enbloc Sending 1 = Overlap Sending 1 09 Dial Information Element ISDN Protocol definition Only when Dial Sending Mode (10-03- 08) is set for 1 (Overlap Send- ing). 0 = Keypad Facility 1 = Called Party Number 1 10 Master/Slave System If set to 0, system is synchro- nized to network clock. If set to 1, system is not synchronized to the network clock. 0 = Slave System 1 = Master System 0 (V1.5 Deleted) 11 Networking System No. 0 ~ 50 0 (V1.5 Deleted) ISSUE 1.1 SL1000 Program 10 Programming Manual 2-7

If the transmit/receive voltage is less than the setting in 10-03-13, the system considers this as Loss-Of-Signal and the PRI does not come up. Note that there are different values based on the setting in 10-03-12 for the PRI. 0 = Level 0 (lowest sensitivity) 1 = Level 1 2 = Level 2 3 = Level 3 4 = Level 4 5 = Level 5 6 = Level 6 7 = Level 7 (highest sensitivity) 2 14 Service Protocol for S-point 0 = Keypad facility 1 = Specified Protocol for Aspire system 0 15 Call Busy Mode for S-point 0 = Alerting 1 = Disconnect 0 16 Two B-Channel Transfer for PRI Service 0 = off 1 = on 0 17 ISDN Ringback Tone System can provide ringback tone, by setting 10-03-17 is set to 1 : Enable. 0 = Disable 1 = Enable 0 18 Type of Number ISDN Protocol definition. Select the number type for the ISDN circuit. 0 = Unknown 1 = International number 2 = National number 3 = Network Specific number 4 = Subscriber number 5 = Abbreviated number 0 19 Numbering Plan Identification ISDN Protocol definition. Select the Numbering Plan used for the ISDN circuit. 0 = Unknown 1 = ISDN numbering plan 2 = Data numbering plan 3 = Telex numbering plan 4 = National standard numbering plan 5 = Private numbering plan 0 20 Network Exchange Selection Select the ISDN protocol for the ISDN circuit 0 = Standard (same as NI-2) 1 = reserved 2 = reserved 3 = DMS (A211) 4 = 5ESS 5 = DMS (A233) 6 = 4ESS 7 = NI-2 0 21 Number of Ports 0 = Auto 1 = 4 Ports 2 = 8 Ports 3 = 12 Ports 4 = 16 Ports 5 = 20 Ports 6 = 24 Ports 7 = 28 Ports 0 22 QSIG Operation Mode 0 = Disable 1 = Enable 0 (V1.5 Deleted) For PRI (T1) PKG Setup Physical Port Number 01 ~ 24 Item No. Item Input Data Default 01 Logical Port Number The start port number of a T1 line is dis- played, and 24 logic ports are automatically assigned to a DTI (T1) line. 1 ~ 126 0 02 T1 Signal Format Selection 0 = D4 (12 Multi Frame) 1 = ESF (24 Multi Frame) 0 03 Zero Code Suppression 0 = B8ZS 1 = AMI/ZCS 0 ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-8

0 = 0 feet ~ 133 feet 1 = 133 feet ~ 266 feet 2 = 266 feet ~ 399 feet 3 = 399 feet ~ 533 feet 4 = 533 feet ~ 655 feet 0 05 T1 Clock Source 0 = Internal 1 = External 1 06 Number of Ports 0 = Auto 1 = 4 Ports 2 = 8 Ports 3 = 12 Ports 4 = 16 Ports 5 = 20 Ports 0 For E1 PKG Setup Physical Port Number 01 ~ 30 Item No. Item Input Data Default 01 Logical Port Number 1 ~ 126 0 02 Number of channels 0 ~ 30 0 04 E1 Clock Source 0 = Internal 1 = External 1 05 Transmit Pulse Mask 0 = 01 to 133 feet 1 = 133 to 266 feet 2 = 266 to 399 feet 3 = 399 to 533 feet 4 = 533 to 655 feet 0 06 Frame Type 0 = Double Frame (no CRC-4) 1 = Multiframe Structure (CRC-4) 0 07 Line Coding 0 = AMI 1 = HDB3 1 10 Receive Input Threshold 0 = 0.91/1.70 V 1 = 0.74/0.84 V 2 = 0.59/0.84 V 3 = 0.42/0.45 V 4 = 0.32/0.45 V 5 = 0.21/0.20 V 6 = 0.16/0.10 V 7 = 0.10/not defined 2 For VoIPDB PKG Setup Physical Port Number 01 ~ 16 Item No. Item Input Data Default 01 Trunk Logical Port Number 1 ~ 126 0 02 Trunk Type 0 = H.323 1 = SIP 1 Conditions • When changing a defined terminal type, first set the type to 0 and then plug the new device in to have the system automatically define it, or redefine the type manually. • The system must have a unit installed to view/change the options for that type of unit. ISSUE 1.1 SL1000 Program 10 Programming Manual 2-9

None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-10

10-04 : Music On Hold Setup Level IN Description Use Program 10-04 : Music on Hold Setup to set the Music on Hold (MOH) source. For internal Music on Hold, the system can provide a service tone callers on hold or one of eleven synthesized se- lections. Input Data Item No. Item Input Data Default Description 01 Music on Hold Source Selection 0 = Internal MOH 1 = External MOH 2 = Service Tone 3 = VMDB 0 • Internal Music Tune - The tune is set by Program 10-04-02. • External Source - ACI input via ana- log trunk port (COI3) (Program10- 03-02; COIU). • Silence - Callers on hold hear si- lence. 02 Music on Hold Tone Selection [In case Item 1 is 0.] 1 = Download File1 2 = Download File2 3 = Download File3 [In case Item 1 is 1, 2, or 3.] 1 ~ 100 = VRS Message Num- ber 1 Download File1 : Farewell Song (by Chopin) Download File2 : Die Forelle (by F. Schubert) Download File3 : Plaisir d’amour (by J.P.E.Martini) 03 Audio Gain Setup 1 ~ 63 (- 15.5 ~ + 15.5 dB) 32 (0 dB) Conditions None Feature Cross Reference • Background Music • Music on Hold ISSUE 1.1 SL1000 Program 10 Programming Manual 2-11

10-06 : ISDN BRI Setup Level IN Description Use Program 10-06 : ISDN BRI Setup define the TE1 selection and DID mode for DID callers when the BRI feature is used. Input Data Slot No. 01 ~ 16 ISDN Line No. 01 ~ 04 Item No. Item Input Data Default 01 TEI selection 0 = Select by SPID number 1 = Select by Channel ID number 0 02 DID mode 0 = Route by Called Party Number 1 = Route by Redirecting Number 0 03 SPID1 Maximum 20 digits No setting 04 SPID2 No setting Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-12

10-07 : Conversation Recording Resource Level IN Description Use Program 10-07 : Conversation Record Resource to select the number of Conference circuits to be used for Conversation Recording. Even if this program is set to ‘0', the telephone conversation recording function can be used. In this case, 32 (16 x 2) circuits will be shared by conference recording and conversation recording. The num- ber of the conference circuits occupied by a conversation recording is two. Input Data The number of Conversation Recording Default 0 ~ 16 (0 = No setting, 1 ~ 16 = 2 ~ 32 Conference Resource) 0 Conditions None Feature Cross Reference • Conference ISSUE 1.1 SL1000 Program 10 Programming Manual 2-13

10-08 : Pre-Ringing Setup Level IN Description Use Program 10-08 : Pre-Ringing Setup to enable or disable pre-ringing for trunk calls. This sets how a trunk initially rings a telephone. With pre-ringing, a burst of ringing occurs as soon as the trunk LED flashes. The call then continues ringing with the normal ring cadence cycle. Without pre-ringing, the call starts ringing only when the normal ring cadence cycle occurs. This may cause a ring delay, depending on when call detection occurs in reference to the ring cycle. Input Data Item No. Description Input Data Default 01 Pre-Ringing 0 = No 1 = Yes 0 Conditions • Used with Analog Trunks only. Feature Cross Reference • Central Office Calls, Answering ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-14

10-09 : DTMF and Dial Tone Circuit Setup Level IN Description Use Program 10-09 : DTMF and Dial Tone Circuit Setup to allocate the circuits on the CPU for ei- ther DTMF receiving or dial tone detection. The CPU has 20 circuits initially, and an additional 16 cir- cuits are added when a VMDB is installed. By Adding EXIFE system can have up to 132. These are used as follows: • Extension: DTMF receiver for single line telephone • Trunk: DTMF receiver for analog trunks, dial tone & busy tone detection for analog trunks Input Data Circuit/Resource Number 01 ~ 132 Item No. Input Data Default Setting 01 0 = Common Use 1 = Extension Only 2 = Trunk Only Resource 01 - 132 = 0 (Common) Resource 01 - 20 are Basic resource (only use Basic Board) Resource 21 - 36 are vmdb resource (only use Basic Board) Resource 37 - 68 are EXIFE1 resource (only use Expansion 1) Resource 69 - 100 are EXIFE2 resource (only use Expansion 2) Resource 101 - 132 are EXIFE3 resource (only use Expansion 3) Conditions • CPU has 20 Channel DSP resources (receivers) only for basic CPU Unit. VMDB has additional 16 DSP resources which you can add to CPU. Addition to that EXIFE also each has 32 DSP resource (receivers) only for expand unit • In case of 0 (= Common) is selected, and if 14-02-10 (Caller ID receive ability) is set to “Yes”, DSP resources are always allocated to analog trunk only, not for analog extension. If 14-02-10 is set to “No”, the DSP resources can be used for both analog trunk and analog extension commonly. Feature Cross Reference • Caller ID • Central Office Calls, Placing • Direct Inward Dialing (DID) • Direct Inward System Access (DISA) ISSUE 1.1 SL1000 Program 10 Programming Manual 2-15

10-12 : CPU Network Setup Level SA Description Use Program 10-12 : CPU Network Setup to setup the IP Address, Subnet-Mask, and Default Gate- way addresses. Caution! If any IP Address or NIC settings are changed, the system must be reset for the changes to take affect. Input Data Item No. Item Input Data Default Description 01 IP Address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 192.168.0.10 Set for CPU. 02 Subnet Mask 128.0.0.0 240.0.0.0 254.0.0.0 255.192.0.0 255.248.0.0 255.255.0.0 255.255.224.0 255.255.252.0 255.255.255.128 255.255.255.240 255.255.255.254 192.0.0.0 248.0.0.0 255.0.0.0 255.224.0.0 255.252.0.0 255.255.128.0 255.255.240.0 255.255.254.0 255.255.255.192 255.255.255.248 255.255.255.255 224.0.0.0 252.0.0.0 255.128.0.0 255.240.0.0 255.254.0.0 255.255.192.0 255.255.248.0 255.255.255.0 255.255.255.224 255.255.255.252 255.255.255.0 The setting of Subnet Mask is invalid when all Host Ad- dresses are 0. If the network section is: 0, 127, 128.0, 191.255, 192.0.0, 223.255.255 The setting of Subnet Mask is invalid. 03 Default Gateway 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 IP Address for Router. 04 Time Zone 0~24 (0 = -12 Hours and 24 = +12 Hours) 12 Determine the offset from Greenwich Mean Time (GMT) time. Then enter its respective value. For example, Eastern Time (US and Canada) has a GMT offset of -5. The program data would then be 7 (0 = - 12, 1 = - 11, 2 = - 10, 3 = - 9, 4 = - 8, 5 = - 7, 6 = - 6, 7 = - 5, : 24 = + 12) ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-16

1 = 100Mbps, Full Duplex 2 = 100Mbps, Half Duplex 3 = 10Mbps, Full Duplex 4 = 10Mbps, Half Duplex 0 NIC Auto Ne- gotiate (CPU) 06 Network Ad- dress Port Translation (NAPT) Router Setup 0 = No (Disable) 1 = Yes (Enable) 0 If using an ex- ternal NAPT Router or not. 07 NAPT Router IP Address(De- fault Gateway [WAN]) 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 Set the IP ad- dress on the WAN side of router. 08 ICMP Redirect 0= NO, Signaling packets will follow the ICMP redirect mes- sage. 1= YES, Signaling packets will NOT follow the ICMP redirect message. 0 When receiv- ing ICMP redi- rect message, this determines if the IP Rout- ing Table up- dates automatically or not. 09 IP Address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 172.16.0.10 Set for VoIPDB. 10 Subnet Mask 128.0.0.0 240.0.0.0 254.0.0.0 255.192.0.0 255.248.0.0 255.255.0.0 255.255.224.0 255.255.252.0 255.255.255.128 255.255.255.240 255.255.255.254 192.0.0.0 248.0.0.0 255.0.0.0 255.224.0.0 255.252.0.0 255.255.128.0 255.255.240.0 255.255.254.0 255.255.255.192 255.255.255.248 255.255.255.255 224.0.0.0 252.0.0.0 255.128.0.0 255.240.0.0 255.254.0.0 255.255.192.0 255.255.248.0 255.255.255.0 255.255.255.224 255.255.255.252 255.255.0.0 Set for VoIPDB. 11 NIC Setup 0 = Auto Detect 1 = 100 Mbps, Full Duplex 3 = 10 Mbps, Full Duplex 5 = 1 Gbps, Full Duplex 0 Set for VoIPDB. Conditions • The system must be reset for these changes to take affect. Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-17

10-13 : In-DHCP Server Setup Level SA Description Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the CPU. Input Data Item No. Item Input Data Default Description 01 DHCP Server Mode 0 = Disable 1 = Enable 0 Enable or disable the use of the built-in DHCP Server. This program cannot be enabled if PRG10-63-01 is enabled. 02 Lease Time Days 0 ~ 255 0 day Lease Time of the IP address to a cli- ent. Pressing the Hold Key incre- ments to the next setting data. Hour 0 ~ 23 0 hour Minutes 0 ~ 59 30 minutes 05 Last DHCP Data 0 = Disable 1 = Enable 1 If 10–13–01 is enabled, this setting determines if DHCP resource is en- abled or disabled. Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-18

10-14 : Managed Network Setup Level SA Description Use Program 10-14 : Managed Network Setup to set up the range of the IP address which the DHCP Server leases to a client. Input Data Item No. Item Input Data Default Related Program 01 The Range of the IP address to Lease. When Maximum has not been entered, the maximum value equals the minimum value. Minimum : 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 172.16.0.100 10-13-04 Maximum : 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 172.16.5.254 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-19

10-15 : Client Information Setup Level SA Description Use Program 10-15 : Client Information Setup to set up the client information when the DHCP server needs to assign a fixed IP address to clients. Input Data Client Number 1 ~ 16 Item No. Item Input Data Default 01 MAC Address MAC : 00-00-00-00-00-00 ~ FF-FF-FF-FF-FF-FF 00-00-00-00-00-00 IP Address The IP address should be assigned out of the scope range set up in Program 10-14. 1.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-20

10-16 : Option Information Setup Level SA Description Use Program 10-16 : Option Information Setup to set up the option given from the DHCP server to each client. Input Data Item No. Item Input Data Default 01 Router Set the Router IP address. Code number 0 ~ 255 3 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 02 DNS Server Set IP address of DNS Server. Code number 0 ~ 255 6 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 03 TFTP Server Set the name for the TFTP Server. Code number 0 ~ 255 66 (Fixed) Maximum 64 character strings No setting 05 MGC Code number 0 ~ 255 129 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 172.16.0.10 06 Client Host Name Set the Client Host Name. Code number 0 ~ 255 12 (Fixed) Maximum 64 character strings No setting 07 DNS Domain Name Set the DNS Domain Name. Code number 0 ~ 255 15 (Fixed) Maximum 20 character strings No setting 08 Download Protocol Set Download Protocol used for AutoCon- fig (for DR700 Series). Code number 0 ~ 255 43 (Fixed) Sub code number 163 (Fixed) 1 = FTP 2 = HTTP 1 09 Encryption Information Set an Encryption Information used for AutoConfig (for DR700 series). Code number 0 ~ 255 43 (Fixed) Sub code number 164 (Fixed) Maximum 128 character strings No setting 10 FTP Server Address Set a FTP Server Address used for Auto- Config. Code number 0 ~ 255 43 (Fixed) Sub code number 141 IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 11 Config File Name Set a File Name used for AutoConfig. Code number 0 ~ 255 43 (Fixed) Sub code number 151 Maximum 15 character strings No setting ISSUE 1.1 SL1000 Program 10 Programming Manual 2-21

Code number 0 ~ 255 60 (Fixed) Maximum 256 character strings NEC DR700 13 SNMP Server Code number 0 ~ 255 69 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 14 POP3 Server Code number 0 ~ 255 70 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 16 SIP Server (IP Address) Code number 0 ~ 255 120 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 172.16.0.10 17 SIP Server (Domain Name) If there is setting in 10-16-16 this setting will be ignored Code number 0 ~ 255 120 (Fixed) Maximum 20 character strings No setting 18 FTP Server Code number 0 ~ 255 141 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 19 Config File Name Code number 0 ~ 255 151 (Fixed) Maximum 15 character strings No setting 20 LDS Server 1 Code number 0 ~ 255 162 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 21 LDS Server 2 Code number 0 ~ 255 162 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 22 LDS Server 3 Code number 0 ~ 255 162 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 23 LDS Server 4 Code number 0 ~ 255 162 (Fixed) IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 24 Next Server IP Address IP address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 27 SIP Server Receive Port Code number 0 ~ 255 168 (Fixed) Port: 1 ~ 65535 5080 ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-22

10-17 : H.323 Gatekeeper Setup Level SA Description Use Program 10-17 : H.323 Gatekeeper Setup to set the H.323 Gatekeeper information. Input Data Item Name Input Data Default 01 Gatekeeper Mode Set IP Address either automatically or manu- ally if using an external Gatekeeper. 0 = No Gatekeeper 1 = Automatic 2 = Manual 0 02 Gatekeeper IP Address When Program 10-17-01 is set to 2, use this to set the IP Address of the Gatekeeper 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 04 Preferred Gatekeeper When Program 10-17-01 is set to 1, use this to set the preferred ID of multiple Gatekeep- ers. Maximum 124 characters No setting Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-24

10-18 : H.323 Alias Address Setup Level SA Description Use Program 10-18 : H.323 Alias Address Setup to set the alias address registered to the outside H.323 Gatekeeper. Input Data Number of Alias 1 ~ 6 Item Name Input Data Default 01 Alias Address Set the telephone number (Alias Address) to external gatekeeper. Dial up to 12 digits (0 ~ 9,* , #) No setting 02 Alias Address Type Set the Alias Address Type to external gate- keeper. 0 = E164 0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-25

10-19 : VoIPDB DSP Resource Selection Level IN Description Use Program 10-19 : VoIPDB DSP Resource Selection to define the criteria for each DSP resource on the VoIPDB unit. Input Data DSP Resource Number 01 ~ 16 Item No. Item Input Data Default 01 VoIPDB DSP Resource Selection 0 = Common use for both IP extensions and trunks 1 = Use for IP extensions 2 = Use for SIP trunks 5 = Blocked 6 = Common without unicast paging 7 = Multicast paging 8 = Unicast paging Resource 1 ~ 16 = 0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-26

10-20 : LAN Setup for External Equipment Level IN Description Use Program 10-20 : LAN Setup for External Equipment to define the TCP port/address/etc. for communicating to external equipment. Input Data Type of External Equipment 1 = CTI Server 5 = SMDR Output 6 = DIM Output 9 = 1st Party CTI 11 = O&M Server 12 = Traffic Report Output 13 = Room Data Output for Hotel Service Item No. Item Input Data Default 01 TCP Port 0 ~ 65535 External Device 1 (CTI Server) = 0 External Device 5 (SMDR Output) = 0 External Device 6 (DIM Output) = 0 External Device 9 (1st Party CTI ) = 0 External Device 11 (O&M Server) = 8010 External Device 12 (Traffic Report Output) = 0 External Device 13 (Room Data Output for Hotel Service) = 0 03 Keep Alive Time 1 ~ 255 seconds 30 seconds Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-27

10-23 : SIP System Interconnection Setup Level SA Description Use Program 10-23 : SIP System Interconnection Setup to determine if the system is intercon- nected and define the IP address of another system, call control port number and alias address for SL1000 system interconnection. Input Data System Number 001 ~ 1000 Item No. Item Input Data Default 01 System Interconnection 0 = No (Disable) 1 = Yes (Enable) 0 02 IP Address 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 03 Call Control Port 1 ~ 65535 1720 04 Dial Number Up to 12 digits (0 ~ 9) Not Set Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-28

10-24 : Daylight Savings Setup Level SA Description Use Program 10-24 : Daylight Savings Setup to set the options for daylight savings. As the tele- phone system is used globally, these settings define when the system should automatically adjust for daylight savings as it applies to the region in which the system is installed. Input Data Item No. Item Input Data Default 01 Daylight Savings Mode Enable (1) or disable (0) the system ability to adjust the time for daylight savings/standard time. 0 = Disable 1 = Enable 0 02 Time for Daylight Savings Enter the time of day when the system should adjust for daylight savings time. 00 : 00 ~ 23 : 59 02 : 00 03 Start Month (Summer Time) Enter the month when the system should ad- just the time for daylight savings time (01 ~ 12). 1 ~ 12 (Jan = 1, 2 = Feb, etc.) 4 04 Start of Week Enter the week of the month when the system should adjust the time for daylight savings time. The week will start on the day listed in 10-24-05. 0 = Last Week of Month 0 ~ 5 1 05 Start of Week Day Enter the day of the week when the system should adjust the time for daylight savings time (01 = Sunday, 02 = Monday, etc.). 1 ~ 7 (Sun = 1, Mon = 2, etc.) 1 06 End of Month Enter the month when the system should ad- just the time for standard time (01 ~ 12). 1 ~ 12 (Jan = 1, 2 = Feb, etc.) 10 07 End of Week Enter the week of the month when the system should adjust the time for standard time. The week will start on the Day listed in 10-24- 08. 0 = Last Week of Month 0 ~ 5 0 08 End of Week Day Enter the day of the week when the system should adjust the time for daylight savings time (01 = Sunday, 02 = Monday, etc.). 1 ~ 7 (Sun = 1, Mon = 2, etc.) 1 Conditions None Feature Cross Reference • Clock/Calendar Display/Time and Date ISSUE 1.1 SL1000 Program 10 Programming Manual 2-29

10-25 : H.323 Gateway Prefix Setup Level SA Description Use Program 10-25 : H.323 Gateway Prefix Setup to set the gateway prefix registered to the outside gatekeeper. Input Data Item No. Item Input Data Default 01 Gateway Prefix Entry 0 = Off 1 = On 0 02 Gateway Prefix Value When Program 10-25-01 is set as 1 (Off) this setting will be ignored. Up to 12 digits (0 ~ 9,* , #) No setting Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-30

10-26 : IP System Operation Setup Level IN Description Use Program 10-26 : IP System Operation Setup to enable or disable the Peer to Peer feature for SIP MLT and SIP IP stations. Input Data Item No. Item Input Data Default Note 02 RTP Forwarding Mode 0 = Disable 1 = Enable 0 03 SIP Peer to Peer Mode 0 = Off 1 = On 1 04 DR700 Peer to Peer Mode 0 = Off 1 = On 1 05 SIP CTI Mode When SIP CTI Mode is set as 1 (Mode1) it will ignore the setting at 10-26-03. 0 = Disable 1 = Mode1 0 Conditions • Disabling 10-26-04 results in SIP MLT Station-to-SIP MLT Station calls using a DSP resource. • SIP-to-SIP MLT Station does not support Peer to Peer function and will result in using a DSP re- source. • Disabling 10-26-03 results in SIP IP Station-to-SIP IP Station calls using a DSP resource. Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-31

10-28 : SIP System Information Setup Level SA Description Use Program 10-28 : SIP System Information Setup to set up basic SIP trunking. Input Data Item No. Item Input Data Default 01 Domain Name Set the domain name of the SIP-URL. Up to 64 Characters (ex. : [email protected]) None 02 Host Name Set the host name of the SIP-URL. Up to 48 Characters (ex. : [email protected]) None 03 Transport Protocol Set the protocol for the connection. 0 = UDP 1 = TCP 0 04 UserID User ID in the SIP Invite Setup message. Use it for outbound caller ID information if no information is assigned in commands 21-17, 21-19, 15-16, 14-12 and 10-36. A call cannot be completed across the span if there is no outbound CID info. The reason for this is: the from and display portion of the invite message would be blank, and it would not know where the call originated from. Up to 32 Characters When assigning the User ID, the ID may contain only alpha characters. (A space and/or special characters are not al- lowed in the User ID field). (ex. : [email protected]) None 05 Domain Assignment If the information from Telco was a domain name ([email protected]) then set to domain. If the infor- mation for Telco was a IP address then set to IP Address. 0 = IP Address 1 = Domain Name 0 06 IP Trunk Port Binding Trunk port binding is only used for SIP trunks to the provider in Non-Registration Mode only. When this is disabled, an inbound call comes in and fol- lows your DID routing but it comes in on the first available trunk. When enabled, the inbound call comes in and follows your normal DID routing but maps to that specified trunk. If that trunk is busy, it sends back a busy unless you build a hunt group. To build the hunt group, it references command 14-12-02 (pilot register ID). This then points you to command 10-36-02. All the numbers with the same pilot are in the same hunt group. 0 = Disable 1 = Enable 0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-32

10-29 : SIP Server Information Setup Level SA Description Use Program 10-29 : SIP Server Information Setup to define the SIP Proxy setup for outbound/ inbound. The 10-29 commands are not used in non-registration mode. If entries are made in Program 10-29-xx for a SIP Server and the SIP Server is then removed or not used, the entries in Program 10-29-xx must be set back to their default settings. Even if 10-29-01 is set to 0 (off), the sys- tem still checks the settings in the remaining 10-29 programs. Input Data Item No. Item Input Data Default Note 01 Default Proxy (Outbound) This sets whether the SIP message is al- ways sent through the Default Proxy. 0 = Off 1 = On 0 02 Default Proxy (Inbound) Need to be registered in registration mode. This sets whether the SIP message is al- ways received through the Default Proxy. 0 = Off 1 = On 0 03 Default Proxy IP Address This is optional and used if the provider gives you a proxy address that is different than the registration address. If the provider is using domain names instead of IP ad- dresses, leave this at default. 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 04 Default Proxy Port Number The port number of the Default Proxy is set. 0 ~ 65535 5060 05 Registrar Mode The mode registered in the registration server is set. 0 = None 1 = Manual 0 06 Registrar IP Address IP address of the SIP registration server is set. 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 07 Registrar Port Number The port number of the SIP registration server is set. 0 ~ 65535 5060 08 DNS Server Mode This setting determines if the DNS server is used. 0 = Off 1 = On 0 09 DNS Server IP Address If 10-29-08 is 1, this is effective. This sets the IP address of the DNS server. 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 10 DNS Port Number If 10-29-08 is 1, this is effective. This sets the port number of the DNS server. 0 ~ 65535 53 11 Registrar Domain Name This sets the domain name of the registra- tion server. Up to 128 Characters None 12 Domain Name This specifies the domain name of the SIP server. Up to 64 Characters None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-33

This specifies the host name of the SIP server. Up to 48 Characters None 14 SIP Carrier Choice This selects the carrier type of the SIP server. When Carrier A, B, or C is selected in PRG10-29-14, PRG10-29-16 Register Sub Mode is set "On" automatically. 0 ~ 7 0 = Standard 1 = Carrier A 2 = Carrier B 3 = Carrier C 4 = Carrier D 5 = Carrier E 6 = Carrier F 7 = Carrier G 0 15 Registration Expiry (Expire) Time This sets the expiration time when the SIP trunk registers to the Sip server. When half the time set here passes, the registration update is automatically done. 120 ~ 65535 seconds 3600 16 Register Sub Mode Prevents an invalid Invite message. If the "register information that system send to SIP server" and the "Invite information that system receive" are different, system sends "404 Not Found" message. If PRG10-29-05 Register Mode is 0; Off, it is necessary to set 0; Off in PRG10-29-16. 0 = Off (Allow invalid Invite message) 1 = On (Deny invalid Invite message) 0 17 DNS Source Port (10-29-08 must be On) This sets the DNS source port number. 0 ~ 65535 53 18 Registration Retry Interval This sets interval time to re-send SIP Regis- ter once the SIP Register fails 30 ~ 65535 seconds 60 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-34

10-30 : SIP Authentication Information Setup Level IN Description Use Program 10-30 : SIP Authentication Information Setup to set the authentication options for SIP trunks. Input Data Item No. Item Input Data Default 02 User Name This sets the user name of the SIP trunk. Up to 64 Characters None 03 Password This sets the SIP trunk password. Up to 32 Characters None 04 Authentication Trial This is how many times it will try an authenti- cate before timing out and not registering. 0 ~ 9 1 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-35

10-33 : SIP Registrar/Proxy Information Basic Setup Level IN Description Use Program 10-33 : SIP Registrar/Proxy Information Basic Setup to set the registrar/proxy op- tions for SIP extensions. Input Data Item No. Item Input Data Default 01 Registration Expire Time After this time expires, the UA’s are forced to reregister with the CPU. This allows the CPU to keep a current location of the entire end UA’s. 60 ~ 65535 3600 02 Authentication Mode Check here if a password is desired for the IP SIP phones to register. When checked, 15- 05-16 must have a password entered and also the SIP phone must have the same password. When using Authentication, the station number is the authorization name. 0 = Disable 1 = Enable 0 03 Registrar/Proxy Domain Name Set the domain name of the SIP proxy. Up to 64 Characters None 04 Registrar/Proxy Host Name Set the domain name of the SIP proxy. Up to 48 Characters None Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-36

10-36 : SIP Trunk Registration Information Setup Level IN Description Use Program 10-36 : SIP Trunk Registration Information Setup to set the SIP trunk registration in- formation. Input Data Register ID 1 ~ 31 Item No. Item Input Data Default 01 Registration This setting determines if the SIP trunk infor- mation is registered. 0 = Disable 1 = Enable 0 02 User ID This sets the SIP trunk User ID. Up to 32 Characters None 03 Authentication User ID This sets the SIP trunk Authentication User ID. Up to 64 Characters None 04 Authentication Password This sets the SIP trunk authentication pass- word. Up to 32 Characters None Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-37

10-37 : UPnP Setup Level IN Description Use Program 10-37 : UPnP Setup to set the UPnP (Universal Plug and Play) options for SIP trunks. Input Data Item No. Item Input Data Default 01 UPnP Mode Router must support UPnP. 0 = Disable 1 = Enable 0 02 Retry Time Set interval time to re-check the Router for the WAN IP address. When this set as 0 it will not retry. 0, 60 ~ 3600 (1 ~ 59 cannot be input) 60 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-38

10-39 : Fractional Setup Level IN Description Use Program 10-39 : Fractional Setup to enable or disable the ability to use fractional T1 or PRI. Input Data Item No. Item Input Data Default 01 Fractional 0 = Disable 1 = Enable 0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-39

10-40 : IP Trunk Availability Level IN Description Use Program 10-40 : IP Trunk Availability to enable or disable the ability to use SIP trunks and as- sign the number of ports if IP Trunk is enabled. Input Data Slot Number 0 Item No. Item Input Data Default 01 IP Trunk Availability 0 = Disable 1 = Enable 0 02 Number of Ports 0 ~ 16 (Port) 0 = 0 Port 4 = 4 Port 8 = 8 Port : 16 = 16 Port 0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-40

10-42 : Virtual Loop Back Port Setting Level IN Description Use Program 10-42 : Virtual Loop Back Port Setting to set the data for the Virtual Loop Back Port. Input Data Item No. Item Input Data Default 01 Number of Loop Back Ports 0 ~ 30 (0 = No setting) 0 02 Logical Trunk Port Number 1 ~ 126 0 03 Logical Station Port Number 1 ~ 128 0 04 Layer 3 Timer Type 1 ~ 5 1 05 Calling Party Number 0 = No 1 = Yes 1 06 S-point DDI digits 0 ~ 4 0 07 Call Busy Mode for S-point 0 = Alerting Message 1 = Disconnect Message 0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-41

10-45 : IP Routing Table Setup Level SA Description Use Program 10-45 : IP Routing Table Setup to set up the IP Routing Table. Input Data Routing Table Number 001 ~ 100 Item No. Item Input Data Default 01 Network Address 0.0.0.0 ~ 126.255.255.254 128.0.0.0 ~ 191.255.255.254 192.0.0.0 ~ 223.255.255.254 0.0.0.0 02 Subnet Mask 128.0.0.0 240.0.0.0 254.0.0.0 255.192.0.0 255.248.0.0 255.255.0.0 255.255.224.0 255.255.252.0 255.255.255.128 255.255.255.240 255.255.255.254 192.0.0.0 248.0.0.0 255.0.0.0 255.224.0.0 255.252.0.0 255.255.128.0 255.255.240.0 255.255.254.0 255.255.255.192 255.255.255.248 255.255.255.255 224.0.0.0 252.0.0.0 255.128.0.0 255.240.0.0 255.254.0.0 255.255.192.0 255.255.248.0 255.255.255.0 255.255.255.224 255.255.255.252 0.0.0.0 03 Default Gateway 0.0.0.0 ~ 126.255.255.254 128.0.0.1 ~ 191.255.255.254 192.0.0.1 ~ 223.255.255.254 0.0.0.0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-42

10-46 : DR700 Server Information Setup Level IN Description Use Program 10-46 : DR700 Server Information Setup to set up the information of DR700 Server. Input Data Item No. Item Input Data Default Related Program 01 Register Mode Normal: When the phone boots up, it re- ports the ext. assigned in the phone or chooses the next avail- able extension in the system. Password is not required. Auto: If set to Auto, the SIP user name and password must be entered on the actual IP phone. These settings must match 84-22/15-05-27, or the phone does not come on-line. Manual: When the phone boots up, it prompts user to enter a user ID and password before logging in. It checks this user ID/password against 84-22/15-05-27. If there is no match, the phone does not come online. 0 = Normal 1 = Auto 2 = Manual 0 04 Server Name Assign the Server name to be used in the SIP URL. Up to 32 characters sipphd 06 Register Port Assign the port number in which the SIP messages are sent to on the VoIPDB. This same port number must be assigned in the SIP Multiline termi- nals. If this command is changed, it re- quires a CPU reset. 0 ~ 65535 5080 07 Encryption Mode 0 = Off 1 = On 0 08 Encryption Type 0 = Mode 1 0 09 One Time Password Up to 10 characters (0 ~ 9,* , #) None 10-46-07 10 Start Port 1 ~ 128 1 10-46-01 11 Multicast IP Address This sets the Multicast IP address so that two or more main devices don’t overlap on the same network, or if Multicast is used by other IP services. 224.0.0.0 ~ 239.255.255.255 224.0.0.10 12 Multicast Port 0 ~ 65535 30000 13 Subscribe Session Port 0 ~ 65535 5081 ISSUE 1.1 SL1000 Program 10 Programming Manual 2-43

multiline terminal via the NAT router, this system data is set to On. 0 = Off 1 = On 0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-44

10-48 : License Activation Level IN Description Use Program 10-48 : License Activation to turn on the license issued from the license server. Input Data Item No. Item Input Data Default 01 Software Key Code 20-digit character None 02 Activation Code 8-digit hexadecimal number None 03 Feature Code 7-digit number None Conditions The Key Operation for input item 03 is as follows; Hold Key Edit next feature code • Up to 10 features code is possible to input at once. • Register the license when 10th feature code is edited. Line Key1 Edit previous feature code Line Key2 Register the license Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-45

10-49 : License File Activation Level IN Description Use Program 10-49 : License File Activation to enable the command to save the license file via CF Card which is issued from the license server. Input Data Item No. Item Input Data 01 Save License File on CF Card Dial 1 + Hold (Press Hold to cancel.) Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-46

10-50 : License Information Level IN Description Use Program 10-50 : License Information to confirm license information that is stored in a system. Input Data Item No. Item Read Data 01 License Name None 02 License Quantity 0 ~ 32767 03 Campaign License Quantity 0 ~ 32767 04 Campaign License Remaining Days 0 ~ 9999 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-47

10-51 : PRI/T1/E1 Selection of PRI Level IN Description Use Program 10-51 : PRI/T1/E1 Selection of PRI to select whether the unit works as PRI, T1 or E1. Input Data Slot Number 01 ~ 12 Item No. Item Input Data Default 01 PRI/T1/E1 Selection Chose whether the unit works as PRI, T1 or E1. 0 = PRI 1 = T1 2 = E1 0 = PRI Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-48

10-52 : Free/Demo License Information Level IN Description Use Program 10-52 : Free/Demo License Information to display information on free of charge/Demo license. Input Data Item No. Item Read Data 01 Remaining days of Free/Demo License 0 ~ 9999 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-49

10-61 : Relay Port Setup Level IN Description Use Program 10-61 : Relay Port Setup to defines the relay port type on the 408M. Input Data Relay Port No. 1 ~ 8 Item No. Item Input Data Default 01 Relay Type 0 = No setting 1 = External MOH 2 = BGM resource 3 = External Speaker 4 = Door Phone 0 02 Destination Selection 10-61-01 = 1 or 2 : Not Use 10-61-01 = 3 : 1 ~ 3 External Speaker Message No. 10-61-01 = 4 : 1 ~ 8 Door Phone No. 0 (Not Used) Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-50

10-62 : NetBIOS Setting Level IN (This Program is available for V1.5) Description Use 10-62 : NetBIOS Setting to set the data of NetBIOS. Input Data Item No. Item Input Data Default 01 NetBIOS Mode 0 = Disabled 1 = Enabled 1 02 NetBIOS Name Maximum 15 characters Please avoid using Space between the words. Also when you create name please use all upper letters. SL1000 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Programming Manual 2-51

10-63 : DHCP Client Setting Level IN (This Program is available for V1.5) Description Use 10-63 : DHCP Client Setting to set the data of DHCP Client. Input Data Item No. Item Input Data Default 01 DHCP Client Mode If you are using IP phones/trunks it is recom- mended to not use the DHCP client function, a static IP address would be preferred. If you are going to still use the DHCP client function then the DHCP server should be setup so that the same IP address is always provided to the system. When changing this program a system reset is required. 0 = Disabled 1 = Enabled 0 Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 10 Program 10 : System Configuration Setup 2-52

11-01 : System Numbering Level IN Description Use Program 11-01 : System Numbering to set the system numbering plan. The numbering plan as- signs the first and second digits dialed and affects the digits an extension user must dial to access other extensions and features, such as service codes and trunk codes. If the default numbering plan does not meet the site requirements, use this program to tailor the system numbering to the site. Caution! Improperly programming this option can adversely affect system operation. Make sure you thoroughly understand the default numbering plan before proceeding. If you must change the standard numbering, use the chart for Table 2-1 System Numbering Default Settings on the next page to keep careful and accurate records of your changes. Before changing your numbering plan, use PC Pro to make a backup copy of your system data. Changing the numbering plan consists of three steps: Step 1 : Enter the digit (s) you want to change You can make either single or two digit entries. In the Dialed Number column in the Table 2-1 System Numbering Default Settings on the next page, the nX rows (e.g., 1X) are for single digit codes. The remaining rows (e.g., 11, 12, etc.) are for two digit codes. • Entering a single digit affects all the Dialed Number entries beginning with that digit. For example, entering 6 affects all number plan entries beginning with 6. The entries you make in step 2 and step 3 below affect the entire range of numbers beginning with 6. (For example, if you enter 3 in step 2 the entries affected are 600 ~ 699. If you enter 4 in step 2 below, the entries affected are 6000 ~ 6999.) • Entering two digits lets you define codes based on the first two digits a user dials. For example, en- tering 60 allows you to define the function of all codes beginning with 60. In the default program, only* and # use 2-digit codes. All the other codes are single digit. If you enter a two digit code be- tween 0 and 9, be sure to make separate entries for all the other two digit codes within the range as well. This is because in the default program all the two digit codes between 0 and 9 are undefined. Defining codes based on more than 2 digits require a secondary program (Program 11-20) to define the codes. Step 2 : Specify the length of the code you want to change After you specify a single or two digit code, you must tell the system how many digits comprise the code. This is the Number of Digits Required column in the Table 2-1 System Numbering Default Settings on the next page. Step 3: Assign a function to the code selected After entering a code and specifying its length, you must assign its function. This is the Dial Type col- umn in the Table 2-1 System Numbering Default Settings on the next page. The choices are: Dial Types Dial Type Description Related Program 0 --- Not Used --- 1 Service Code 11-10 : Service Code Setup (for System Administrator) on page 2-63 11-11 : Service Code Setup (for Setup/Entry Operation) on page 2-66 11-12 : Service Code Setup (for Service Access) on page 2-69 11-14 : Service Code Setup (for Hotel) on page 2-72 11-15 : Service Code Setup, Administrative (for Special Access) on page 2-74 11-16 : Single Digit Service Code Setup on page 2-75 ISSUE 1.1 SL1000 Program 11 Programming Manual 2-53

Related Program 2 Extension Number 11-02 : Extension Numbering on page 2-59 11-04 : Virtual Extension Numbering on page 2-60 11-07 : Department Group Pilot Numbers on page 2-61 3 Trunk Access Code 11-09-01 : Trunk Access Code 4 Special Trunk Access 11-09-02 : Trunk Access Code 5 Operator Access 20-17 : Operator Extension on page 2-180 6 F-Route Access 44-xx 9 Dial Extension Analyze 11-20 : Dial Extension Analyze Table on page 2-77 Changing the Dial Type for a range of codes can have a dramatic affect on how your system operates. Assume, for example, the site is a hotel that has room numbers from 100 ~ 399. To make extension numbers correspond to room numbers, you should use Program 11-02 to reassign extension numbers on each floor from 100 to 399. (Other applications might also require you to change entries in Program 11-10 ~ 11-16.) Default See the following tables for default settings. Table 2-1 System Numbering Default Settings Dial Types : 1 = Service Code, 2 = Extension Number, 3 = Trunk Access, 4 = Special Trunk Access, 5 = Operator Access, 6 = Flexible Routing, 9 = Dial Extension Analyze, 0 = Not Used Dialed Number of Digits Required Dial Type Default New Default New 1X 3 2 11 0 0 12 0 0 13 0 0 14 0 0 15 0 0 16 0 0 17 0 0 18 0 0 19 0 0 10 0 0 1* 0 0 1# 0 0 2X 3 2 21 0 0 22 0 0 23 0 0 24 0 0 25 0 0 26 0 0 27 0 0 ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-54

Operator Access, 6 = Flexible Routing, 9 = Dial Extension Analyze, 0 = Not Used Dialed Number of Digits Required Dial Type Default New Default New 28 0 0 29 0 0 20 0 0 2* 0 0 2# 0 0 3X 3 2 31 0 0 32 0 0 33 0 0 34 0 0 35 0 0 36 0 0 37 0 0 38 0 0 39 0 0 30 0 0 3* 0 0 3# 0 0 4X 3 2 41 0 0 42 0 0 43 0 0 44 0 0 45 0 0 46 0 0 47 0 0 48 0 0 49 0 0 40 0 0 4* 0 0 4# 0 0 5X 4 2 51 0 0 52 0 0 53 0 0 ISSUE 1.1 SL1000 Program 11 Programming Manual 2-55

Operator Access, 6 = Flexible Routing, 9 = Dial Extension Analyze, 0 = Not Used Dialed Number of Digits Required Dial Type Default New Default New 54 0 0 55 0 0 56 0 0 57 0 0 58 0 0 59 0 0 50 0 0 5* 0 0 5# 0 0 6X 3 2 61 0 0 62 0 0 63 0 0 64 0 0 65 0 0 66 0 0 67 0 0 68 0 0 69 0 0 60 0 0 6* 0 0 6# 0 0 7X 3 1 71 0 0 72 0 0 73 0 0 74 0 0 75 0 0 76 0 0 77 0 0 78 0 0 79 0 0 70 0 0 7* 0 0 7# 0 0 ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-56

Operator Access, 6 = Flexible Routing, 9 = Dial Extension Analyze, 0 = Not Used Dialed Number of Digits Required Dial Type Default New Default New 8X 3 1 81 0 0 82 0 0 83 0 0 84 0 0 85 0 0 86 0 0 87 0 0 88 0 0 89 0 0 80 0 0 8* 0 0 8# 0 0 9X 1 3 91 0 0 92 0 0 93 0 0 94 0 0 95 0 0 96 0 0 97 0 0 98 0 0 99 0 0 90 0 0 9* 0 0 9# 0 0 0X 1 5 01 0 0 02 0 0 03 0 0 04 0 0 05 0 0 06 0 0 07 0 0 08 0 0 09 0 0 ISSUE 1.1 SL1000 Program 11 Programming Manual 2-57

Operator Access, 6 = Flexible Routing, 9 = Dial Extension Analyze, 0 = Not Used Dialed Number of Digits Required Dial Type Default New Default New 00 0 0 0* 0 0 0# 0 0 * X 4 1 * 1 0 0 * 2 0 0 * 3 0 0 * 4 0 0 * 5 0 0 * 6 0 0 * 7 0 0 * 8 0 0 * 9 0 0 * 0 0 0 ** 0 0 * # 0 0 #X 0 0 #1 2 1 #2 2 1 #3 2 1 #4 2 1 #5 2 1 #6 2 1 #7 2 1 #8 2 1 #9 2 1 #0 2 1 #* 4 1 ## 2 1 Conditions None Feature Cross Reference • Flexible System Numbering ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-58

11-02 : Extension Numbering Level IN Description Use Program 11-02 : Extension Numbering to set the extension number. The extension number can have up to eight digits. The first/second digit (s) of the number should be assigned in Program 11-01 or Program 11-20. This allows an employee to move to a new location (port) and retain the same exten- sion number. Input Data Extension Port Number 001 ~ 128 Item No. Extension Number Description 01 Dial (Up to 4 digits) Set up extension numbers for multiline telephones, single line telephones and IP telephones. Extension number assignments cannot be dupli- cated in Programs 11-02, and 11-07. Default Extension Port Number Extension Number 001 ~ 128 200 ~ 327 Conditions None Feature Cross Reference • Department Calling • Flexible System Numbering • Intercom ISSUE 1.1 SL1000 Program 11 Programming Manual 2-59

11-04 : Virtual Extension Numbering Level IN Description Use Program 11-04 : Virtual Extension Numbering to define the virtual extension numbers. The ex- tension number can have up to four digits. The first/second digit (s) of the number should be assigned in Program 11-01 or Program 11-20. Input Data Virtual Extension Numbers 001 ~ 050 Item No. Virtual Extension Number Description 01 Dial (Up to 4 digits) Set up Virtual Extension numbers. The extension number cannot be duplicated in Pro- grams 11-02 and 11-07. Default Virtual Port Number Extension Number 1 ~ 50 No setting Conditions None Feature Cross Reference • Flexible System Numbering ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-60

11-07 : Department Group Pilot Numbers Level IN Description Use Program 11-07 : Department Group Pilot Numbers to assign a pilot number to each Depart- ment Group set up in Program 16-02. The pilot number is the number users dial for Department Call- ing and Department Step Calling. The pilot number can have up to four digits. The first and second digits of the number should be assigned in Program 11-01 or Program 11-20 as type 2. Input Data Department (Extension) Group Number 01 ~ 32 Item No. Extension Group Pilot Number Description Related Program 01 Dial (Up to 4 digits) Use this program to assign department group pilot numbers. The number set up by Program 11-02 (Extension Numbering) cannot be used. The extension number cannot be dupli- cated in Programs 11-02 and 11-07. • 16-01 : Department (Extension) Group Basic Data Setup • 16-02 : Department Group Assign- ment for Extensions • 16-03 : Secondary Department Group Default • No setting Conditions None Feature Cross Reference • Department Calling • Department Step Calling ISSUE 1.1 SL1000 Program 11 Programming Manual 2-61

11-09 : Trunk Access Code Level IN Description Use Program 11-09 : Trunk Access Code to assign the trunk access code. The trunk access code can be set from 1 ~ 8 digits which is defined to type 3 and 4 in Program 11-01. This is the code exten- sion users dial to access Automatic Route Selection (ARS/F-Route). The Individual Trunk Access Code is used when Trunk Group Routing is desired for an outgoing line. Caution! The digit 9 is defined in Program 11-01 as Dial Type ( ) with the Number of Digits Required set to ( ). If you change the trunk access code in Program 11-09, you must make the corresponding changes in Program 11-01. Input Data Item No. Trunk Access Code Description Default Related Program 01 Dial (Up to four digits) Use this program to assign the trunk ac- cess code. This is the code extension users dial to access Auto- matic Route Selection (ARS/F-Route). 0 • 11-01 : System Numbering • 14-01 ~ 07 : Basic Trunk Data Setup • 14-05 : Trunk Group • 14-06 : Trunk Group Routing • 21-02 : Trunk Group Routing for Extensions 02 2nd Trunk Route Access Code Use this program to define additional trunk access codes. When a user dials the Alternate Trunk Route Access Code, the sys- tem routes their call to the Alternate Trunk Route. No setting • 11-01 : System Numbering • 14-01 ~ 07: Basic Trunk Data Setup • 14-05 : Trunk Group • 14-06 : Trunk Group Routing • 21-02 : Trunk Group Routing for Extensions • 21-15 : Individual Trunk Group Rout- ing for Extensions Conditions None Feature Cross Reference • Automatic Route Selection (ARS/F-Route) • Central Office Calls, Placing • Trunk Group Routing ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-62

11-10 : Service Code Setup (for System Administrator) Level IN Description Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service Codes for the System Administrator. You can customize additional Service Codes in Programs 11-11 ~ 11-16. The following chart shows: • The number of each code (01 ~ 50). • The function of the Service Code. • The type of telephones that can use the Service Code. • The default entry. For example, dialing item 26 allows users to force a trunk line to disconnect. Input Data Item No. Item Terminals Default Related Pro- gram Note 01 Night Mode Switching MLT, SLT 818 12-xx 20-07-01 02 Change of music on hold tone MLT 881 10-04 03 Setting the System Time MLT 828 04 Storing Common Speed Di- aling Numbers MLT 853 05 Storing Group Speed Dial- ing Numbers MLT 854 06 Setting the Automatic Trans- fer for Each Trunk Line MLT 833 24-04-01 07 Canceling the Automatic Transfer for Each Trunk Line MLT 834 24-04-01 08 Setting the Destination for Automatic Trunk Transfer MLT 835 24-04-01 09 Charging Cost Display by the Supervisor MLT 771 11 Entry Credit for Toll Restric- tion MLT 774 12 Night Mode Switching for Other Group MLT 718 12-xx 20-07-01 16 Leaving Message Waiting (Requires CPU to be li- censed for Hotel/Motel) MLT 726 11-11-09 17 Dial Block by Supervisor MLT 701 90-19 18 Off-Premise Call Forward by Door Box MLT 822 13-05 20 VRS - Record/Erase Mes- sage Define Service Code for VRS message recording or erasing. MLT, SLT 716 20-07-13 21 VRS - General Message Playback MLT, SLT 711 20-07-14 22 VRS - Record or Erase Gen- eral Message MLT, SLT 712 20-07-15 ISSUE 1.1 SL1000 Program 11 Programming Manual 2-63

lated Printout Code MLT 721 20-07-18 24 SMDR - Group Accumulated Printout Code MLT 722 20-07-19 25 Account Code Accumulated Printout Code MLT 723 20-07-20 26 Forced Trunk Disconnect MLT, SLT 724 20-07-11 27 Trunk Port Disable for Out- going Calls MLT, SLT 745 20-07-12 32 Set Private Call Refuse MLT, SLT 746 14-01-27 20-07-24 33 Entry Caller ID Refuse MLT 747 20-07-25 34 Set Caller ID Refuse MLT, SLT 748 14-01-27 20-07-25 35 Dial-In Mode Switching MLT, SLT 709 20-07-26 41 Date Setting MLT 789 20-07-30 42 Maintenance Service MLT 743 43 VRS Incoming MLT 878 13-04 15-02-55 44 Cutting the telephone power Sets the Service Code for power cutting. (for Administra- tor) PRG11-10-44 Input dial is Max 4 digits. MLT, SLT 831 45 Room Monitor Permit Sets Service Code (SC) for Room monitor on/off to termi- nal. SC+1+Extension Number ; Room Monitor enable SC+0+Extension Number ; Room Monitor disable MLT, SLT 710 46 Watch Message Setting Service Code setting for Watching message recording to VRS MLT, SLT 714 47 Warning Message Setting Service Code setting for Warn- ing message recording to VRS. MLT, SLT 715 48 Auto Dial Setting for Secu- rity Sensor Service Code setting for desti- nation number when Warning mode detected. MLT 717 49 Auto Dial Setting for Remote Inspection Service Code setting for desti- nation number when remote inspection detects no answer MLT 719 50 Night-mode Skip (Own Group) MLT, SLT 787 MLT = Multiline Terminal SLT = Single Line Telephone ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-64

11-11 : Service Code Setup (for Setup/Entry Operation) Level IN Description Use Program 11-11 : Service Code Setup (for Setup/Entry Operation) to customize the Service Codes which are used for registration and setup. You can customize additional Service Codes in Pro- grams 11-10, and 11-12 ~ 11-16. The following chart shows: • The number of each code (01 ~ 69). • The function of the Service Code. • What type of telephones can use the Service Code. • The default entry. For example, users to turn on or turn off Background Music by dialing the number set at item 18. Input Data Item No. Item Terminals Default Related Program Note 01 Call Forward - All MLT, SLT 848 02 Call Forward - Busy MLT, SLT #1 03 Call Forward - No Answer MLT, SLT 845 04 Call Forward - Busy/No Answer MLT, SLT 844 05 Call Forward - Both Ring MLT, SLT 842 07 Call Forwarding - Follow-Me MLT, SLT 846 08 Do Not Disturb MLT, SLT 847 09 Answer Message Waiting MLT, SLT * 0 11-10-16 10 Cancel All Messages Waiting MLT, SLT 873 11 Cancel Message Waiting MLT, SLT 871 12 Alarm Clock MLT, SLT 827 20-01-06 13 Display Language Selection for Multiline Terminal MLT 778 15-02 14 Text Message Setting MLT 836 15 Enable Handsfree Incoming Intercom Calls MLT 821 20-09-05 20-02-12 16 Force Ringing of Incoming Intercom Calls MLT 823 20-09-05 20-02-12 17 Programmable Function Key Programming (3-Digit Ser- vice Codes) MLT 851 15-07 11-11-38 18 BGM On/Off MLT 825 19 Key Touch Tone On/Off MLT 824 20 Change Incoming CO and ICM Ring Tones MLT 820 15-02 21 Check Incoming Ring Tones MLT 811 ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-66

DID/DISA/DIL MLT 779 24 Change Station Class of Service Allows an extension user to change the COS of another extension. Must be allowed in Program 20-13-28. MLT 777 20-13-28 25 Automatic Transfer Setup for Each Extension Group MLT, SLT 702 20-11-17 24-05 26 Automatic Transfer Cancel- lation for Each Extension Group MLT, SLT 703 27 Destination of Automatic Transfer Each Extension Group MLT 704 20-11-17 24-05 28 Delayed Transfer for Every Extension Group MLT, SLT 705 20-11-17 24-05 24-02-08 29 Delayed Transfer Cancella- tion for Each Extension Group MLT, SLT 706 20-11-17 30 DND Setup for Each Exten- sion Group MLT, SLT 707 31 DND Cancellation for Each Extension Group MLT, SLT 708 33 Dial Block MLT, SLT 700 34 Temporary Toll Restriction Override MLT, SLT 875 21-07 35 Pilot Group Withdrawing MLT, SLT 750 36 Toll Restriction Override MLT, SLT 763 21-14 37 Ring Volume Set MLT 829 38 Programmable Function Key Programming (2-Digit Ser- vice Codes) MLT 852 15-07 11-11-17 41 Tandem Ringing MLT, SLT 744 15-07 30-03 42 Transfer Dial Setting for Out of Range - 889 13-06 43 Headset Mode Switching MLT, SLT 788 45 Set/Cancel Call Forward All (Split) MLT, SLT 782 24-09 46 Set/Cancel Call Forward Busy (Split) MLT, SLT 783 24-09 47 Set/Cancel Call Forward No Answer (Split) MLT, SLT 784 24-09 48 Set/Cancel Call Forward Busy No Answer (Split) MLT, SLT 785 24-09 49 Set/Cancel Call Forward Both Ring (Split) MLT, SLT 786 24-09 50 Set Message Waiting Indication SLT No setting ISSUE 1.1 SL1000 Program 11 Programming Manual 2-67

dication SLT No setting 52 Set/Cancel Call Forward All Destination (No Split) MLT, SLT 791 24-09 53 Set/Cancel Call Forward Busy Destination (No Split) MLT, SLT 792 24-09 54 Set/Cancel Call Forward No Answer Destination (No Split) MLT, SLT 793 24-09 55 Call Forward Busy No An- swer Destination (No Split) MLT, SLT 794 24-09 58 Call Forward with Personal Greeting MLT, SLT 795 59 Call Forward to Attendant except Busy MLT, SLT 796 15-01-08 60 Call Forward to Attendant/No Answer MLT, SLT 797 15-01-09 62 Adjust of Headset Ring Volume MLT No setting 11-11-37 15-02-12 15-02-41 15-02-42 65 Headset Mode Switching MLT 798 66 Dial Control Key Operation MLT 877 68 IntraMail Language Selec- tion for own extension MLT,SLT 764 47-02-16 69 IntraMail Language Selec- tion for specific extension MLT,SLT 765 20-13-53 47-02-16 70 Backlight Brightness MLT 805 15-02-61 ~ 15-02-63 (V1.5 Added) 71 Auto Backlight MLT 806 15-02-64 15-02-65 (V1.5 Added) 72 Headset V.Announce MLT 814 (V1.5 Added) MLT = Multiline Terminal SLT = Single Line Telephone Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-68

11-12 : Service Code Setup (for Service Access) Level IN Description Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes which are used for service access. You can customize additional Service Codes in Programs 11-10, 11-11, and 11-14 through 11-16. The following chart shows: • The number of each code (01 ~ 64). • The function of the Service Code. • The type of telephones that can use the Service Code. • The default entry. For example, dialing (Item 05) cancels a previously set Camp- On. • Programs that may be affected with the changing the code. Input Data Item No. Item Terminals Default Related Program Note 01 Bypass Call Activating Call Forwarding/Do Not Disturb Override. This code is avail- able only if you disable the voice mail Single Digit dialing code in Program 11-16-09. MLT, SLT 807 02 Conference MLT, SLT 826 03 Override (Off-Hook Signaling) MLT, SLT 809 04 Set Camp-On MLT, SLT 850 05 Cancel Camp-On MLT, SLT 870 06 Switching of Voice Call and Signal Call MLT, SLT 812 07 Step Call MLT, SLT 808 08 Barge-In MLT, SLT 810 09 Change to STG (Department Group) All Ring MLT, SLT 780 16-02 10 Station Speed Dialing MLT, SLT #2 11 Group Speed Dialing MLT, SLT #4 12 Last Number Dial MLT, SLT #5 13 Saved Number Dial MLT, SLT 815 14 Trunk Group Access MLT, SLT 804 15 Specified Trunk Access MLT, SLT #9 17 Clear Last Number Dialing Data MLT, SLT 876 18 Clear Saved Number Dialing Data MLT, SLT 885 19 Internal Group Paging MLT, SLT 801 31-01-01 20 External Paging MLT, SLT 803 21 Meet-Me Answer to Specified Inter- nal Paging Group MLT, SLT 864 31-02-01 ISSUE 1.1 SL1000 Program 11 Programming Manual 2-69

Paging MLT, SLT 865 23 Meet-Me Answer in Same Paging Group MLT, SLT 863 31-02-01 24 Combined Paging MLT, SLT * 1 31-02-01 31-07 25 Direct Call Pickup - Own Group MLT, SLT 856 26 Call Pickup for Specified Group MLT, SLT 868 23-02 27 Call Pickup MLT, SLT * # 23-02 28 Call Pickup for Another Group MLT, SLT 869 23-02 29 Direct Extension Call Pickup MLT, SLT ** 30 Specified Trunk Answer MLT, SLT 772 31 Park Hold MLT, SLT #6 24-03 32 Answer for Park Hold MLT, SLT * 6 24-03 33 Group Hold MLT, SLT 832 34 Answer for Group Hold MLT, SLT 862 35 Station Park Hold MLT, SLT 773 36 Door Box Access MLT, SLT 802 37 Common Canceling Service Code MLT, SLT * 9 38 General Purpose Indication MLT, SLT 883 15-07-56 15-07-57 42 Flash on Trunk lines SLT #3 43 Answer No-Ring Line (Universal Answer) MLT, SLT #0 14-05 14-06 44 Callback Test for SLT SLT 899 45 Enabled On Hook When Holding (SLT) SLT 849 15-03-07 46 Answer On Hook When Holding (SLT) SLT 859 15-03-08 47 Call Waiting Answer/Split Answer Splitting (switching) between calls SLT 894 11-12-03 48 Account Code SLT ## 51 VM Access MLT, SLT * 8 52 Live Monitoring MLT 725 (V1.5 Deleted) 53 Live Recording at SLT MLT, SLT 754 54 VRS Routing for ANI/DNIS Use when setting up ANI/DNIS Rout- ing to the VRS Automated Attendant. Using the Transfer feature, this also allows a call to be transferred to the VRS. MLT, SLT 882 56 E911 Alarm Shut Off Enter the Service Code that an ex- tension user can dial to shut off the E911 Alarm Ring. MLT 886 21-01-13 21-01-14 57 Tandem Trunking MLT, SLT #8 ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-70

Assign the Service Code a user dials to Transfer a call to a Conference call. MLT, SLT 884 59 Trunk Drop Operation for SLT SLT 760 60 Directory Dialing MLT 887 62 Security Sensor Reset Service Code setting for cancel Warning message sending and emergency call. MLT,SLT 816 63 Watch Mode Start Service Code (SC) setting for on/off watch mode. SC+1;Watch mode start SC+0; Watch mode end. MLT,SLT 817 64 Security Sensor Mode Start Service Code (SC) setting for on/off security sensor. SC+1; Start sensor detection SC+0; Ignore sensor detection MLT,SLT 819 MLT = Multiline Terminal SLT = Single Line Telephone Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 11 Programming Manual 2-71

11-14 : Service Code Setup (for Hotel) Level IN Description Use Program 11-14 : Service Code Setup (for Hotel) to customize the Service Codes which are used with the Hotel/Motel feature. You can customize additional Service Codes in Programs 11-10 ~ 11-12, 11-15 and 11-16. The Service Codes can be used only at telephones registered as hotel termi- nals in Program 42-02. The following chart shows: • The number of each code (01 ~ 19). • The function of the Service Code. • The type of telephones that can use the Service Code. • The default entry. Input Data Item No. Item Terminals Default Note 01 Set DND for Own Extension MLT, SLT 727 02 Cancel DND for Own Extension MLT, SLT 728 03 Set DND for Other Extension MLT, SLT 729 04 Cancel DND for Other Extension MLT, SLT 730 05 Set Wake Up Call for Own Extension MLT, SLT 731 06 Cancel Wake Up Call for Own Extension MLT, SLT 732 07 Set Wake Up Call for Other Extension MLT, SLT 733 08 Cancel Wake Up Call for Other Extension MLT, SLT 734 09 Set Room to Room Call Restriction MLT, SLT 735 10 Cancel Room to Room Call Restriction (Hotel) MLT, SLT 736 11 Change Toll Restriction Class for Other Extension MLT, SLT 737 12 Check-In MLT, SLT 738 13 Check-Out MLT, SLT 739 14 Room Status Change for Own Extension MLT, SLT 740 15 Room Status Change for Other Extension MLT, SLT 741 16 Room Status Output MLT 742 17 Hotel Room Monitor MLT, SLT 770 19 Hotel Room Data Set MLT, SLT No setting MLT = Multiline Terminal SLT = Single Line Telephone Conditions None ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-72

11-15 : Service Code Setup, Administrative (for Special Access) Level IN Description Use Program 11-15 : Service Code Setup, Administrative (for Special Access) to customize the special access Service Codes which are used by the administrator in the Hotel/Motel feature. You can customize additional Service Codes in Programs 11-10 ~ 11-14 and 11-16. The following chart shows: • The number of each code (01 ~ 14). • The function of the Service Code. • What type of telephones can use the Service Code. • The default entry. • Programs that may be affected when changing the code. Input Data Item No. Item Terminals Default Related Pro- gram Note 01 Remote Maintenance 830 05 System Programming Mode, Log-On MLT #* #* 11-01 09 Transfer to Incoming Ring Group No setting 11 Ethernet Port Reset No setting (V1.5 Deleted) 12 Extension Data Swap MLT No setting 92-04 13 Remote Access from DISA No setting 22-02 14 Modem Access 840 MLT = Multiline Terminal SLT = Single Line Telephone Conditions None Feature Cross Reference • Hotel/Motel ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-74

11-16 : Single Digit Service Code Setup Level IN Description Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit Service Codes used when a busy or ring back signal is heard. You can customize additional Service Codes in Pro- grams 11-10 ~ 11-15. The following chart shows: • The number of each code (01 ~ 11). • The function of the Service Code. • The default entry. For example, dialing 1 (Item 03) when calling an extension switches the call from either a voice or signal call (depending on how it is currently defined). • Programs that may be affected by changing these codes. Input Data Item No. Item Default Related Pro- gram Note 01 Step Call 4 02 Barge-In No setting 03 Switching of Voice/Signal Call 1 04 Intercom Off-Hook Signaling * 05 Camp-On # 06 DND/Call Forward Override Bypass No setting 07 Message Waiting 0 09 Access to Voice Mail 5 10 (Department) STG All Ring Mode No setting 16-01-05 11 Station Park Hold No setting Conditions None Feature Cross Reference None ISSUE 1.1 SL1000 Program 11 Programming Manual 2-75

11-19 : Remote Conference Pilot Number Setup Level IN Description Use Program 11-19 : Remote Conference Pilot Number Setup to assign the pilot number to be used for the Remote Conference. This is the number that outside parties will call in order to connect to a conference. Input Data Conference Group Number 1 ~ 4 Item No. Remote Conference Group Pilot Number Default Related Program 01 Dial (Up to 4 digits) Note 20-13-46 20-34 No Remote Conference Pilot Numbers assigned to any Conference Group (1 ~ 4). Conditions None Feature Cross Reference • Conference, Remote ISSUE 1.1 SL1000 Program 11 Program 11 : System Numbering 2-76

11-20 : Dial Extension Analyze Table Level IN Description Use Program 11-20 : Dial Extension Analyze Table to define the dial type based on three or more digits. This program is relevant only if digits in 11-01-01 are set to 9 (Dial Extension Analyze). Input Data Dial Extension Analyze Table 001 ~ 128 Item No. Dial Extension Analyze Table Default Related Program 01 Dial (Up to four digits : 0, 1 ~ 9, #,* , @) No setting 11-01 02 Type of Dials : 0 = Not used 1 = Service Code 2 = Extension Number 5 = Operator Access 6 = F-Route Access 0 11-01 Conditions • When the system uses the Dial Extension Analyze Table to determine the dial type, the lower table has priority. For example, if Table 1 has 211 defined and Table 2 has 2113 defined, Table 1 is used to determine the dial type. Feature Cross Reference None ISSUE 1.1 SL1000 Program 11 Programming Manual 2-77

12-01 : Night Mode Function Setup Level IN Description Use Program 12-01 : Night Mode Function Setup to set up the Night Mode options. Refer to the fol- lowing chart for a description of each option, its range and default setting. Input Data Item No. Item Input Data Default Description Related Pro- gram Note 01 Manual Night Mode Switching 0 = Off 1 = On 1 Allow/Prevent a activating Night Service by dialing a ser- vice code. 11-10-01 02 Automatic Night Mode Switching 0 = Off 1 = On 0 According to a preset sched- ule, enable or disable Auto- matic Night Service for the system. 12-02 12-03 03 Night mode switch operating mode 0 = Not used 1 ~ 8 (Opera- tion Mode1 - 8) 0 Use this option to set the op- eration mode of the CPU Night Service mode switch sensors (external Night Mode Selector Switch). The Night Service mode affects trunk inbound and outbound rout- ing. (V1.5 Deleted) Even if the operation mode is changed manually, the operation mode changes according to the schedule set up. Conditions None Feature Cross Reference • Night Service ISSUE 1.1 SL1000 Program 12 Program 12 : Night Mode Setup 2-78