Nitecore HC30 Operation & User’s Manual

· Utilizes a CREE XM-L2 U2 LED for a maximum output up to 1000 Lumens · High efficiency circuit board provides up to 330 hours runtime on one 18650 Li-ion battery or two CR123 batteries · Five brightness levels and three concealed special modes to select from · Direct access to turbo mode · Incorporates innovative Precision Digital Optics Technology · Featuring Advanced Temperature Regulation (ATR) technology to dynamically adjust output performance based on its internal temperature · Special head switch for quick operation with one hand · Reverse polarity protection prevents damage from incorrectly inserted batteries · Toughened ultra-clear mineral glass with anti-reflective coating · Constructed from aerospace grade aluminum alloy · Robust HAIII military grade hard-anodized · Comfortable chafe-free and breathable nylon headband · Waterproof in accordance with IPX-8 (two-meter submersible) · Impact resistant to 1.5 meters · Tail-stand capability Specifications Length: 3.86” (98.0mm) Head diameter: 0.95” (24.2mm) Tube diameter: 0.94” (23.8mm) Weight: 1.42oz (40.3g, without battery) Accessories Spare O ring, button cover，clip Battery Options Thanks for purchasing NITECORE! ® The All-Round Flashlight Expert TURBO HIGH MID LOW LUMENS 400 LUMENS 1000 LUMENS 210 LUMENS 75 1h 3h30min 7h15min LOWER LUMEN 1 330h 15h15min 2h30min 4h30min 150h 10h15min 45min 162m (Beam Distance) 6600cd (Peak Beam Intensity) IPX-8, 2m (Waterproof AND Submersible) 1.5m (Impact Resistant) 1×18650 2×CR123 HC30 NOTICE The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using one x 3.7V 3400mAh Nitecore 18650 battery and 2 x 3V 1700mAh Nitecore CR123 batteries under laboratory conditions. The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors. Operating Instructions Battery Installation As illustrated, insert batteries with the positive (+) end facing towards the head. Caution DO NOT direct the beam towards human or animal eyes when using HC30. On/Off Operation To turn HC30 on in direct ultralow mode: with HC30 turned off, press the switch until a “click” is heard; To turn HC30 on in general mode: with HC30 turned off, press the switch for over one second. HC30 has memory effect for brightness in this mode. When it is turned on, HC30 will directly enter the brightness level last used. To turn HC30 off: with HC30 turned on, press the switch for over one second. Note: In standby mode, HC30 can stand by for over two years with one 18650 battery. Brightness Levels With HC30 turned on, press the switch to cycle through brightness levels: low, medium, high, turbo, ultralow. Instant Turbo With HC30 turned off, press the switch for over two seconds to enter turbo (1000 Lumens). To exit, press the switch for over one second to turn HC30 off. Special Modes (Strobe/SOS/Location Beacon) With HC30 turned off, double-click the switch to enter strobe. Press the switch to cycle through SOS-location beacon-strobe modes. To exit, press the switch for over one second to turn HC30 off. Lockout Mode Loosen the tail cover to lock out HC30 to avoid accidental activation. Advanced Temperature Regulation(ATR) Advanced temperature regulation (ATR) technology allows HC30 to dynamically adjust output performance according to its internal temperature, thus maintaining its internal temperature below 55 degree Celsius. This prevents damage from overheating and prolongs its working life. Maintenance Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant. TYPE Nominal voltage Compatible Primary Lithium battery CR123 3V Y (Recommended) 18650 Rechargeable Li-ion battery 18650 3.7V Y (Recommended) Rechargeable Li-ion battery RCR123 3.7V Y Output & Runtime

TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: [email protected] Web: www.nitecore.com Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road, Guangzhou, China 510600 ※All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occurs between this manual and information specified on www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice. ® ALL-ROUND Flashlight Expert Warranty Service All NITECORE® products are warranted for quality. Any defective / malfunctioning NITECORE® product can be repaired free of charge for a period of 60 months (5 years) from the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty is nullified in all of the following situations: 1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties. 2. The product(s) is/are damaged through improper use. 3. The product(s) is/are damaged by leakage of batteries. For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to [email protected] Thanks for purchasing NITECORE! Please find us on facebook: NITECORE Flashlights 20151009