NordicTrack GX2 Sport NTEX03009.3 Operation & User’s Manual

HOW TO ADJUST THE SEAT To adjust the position of the seat, first loosen the adjustment knob and pull the adjustment knob downward. Next, move the seat forward or backward to the desired position. Then, release the adjustment knob into an adjust- ment hole in the seat carriage and firmly tighten the adjustment knob. Make sure that the adjustment knob is engaged in an adjustment hole. HOW TO ADJUST THE SEAT POST For effective exercise, the seat should be at the proper height. As you pedal, there should be a slight bend in your knees when the pedals are in the lowe ...

Locate the Adjustment Knob (23) on the front of the Frame (1). Loosen the Adjustment Knob, pull it outward, and insert the Handlebar Post (4) into the Frame. Next, move the Handlebar Post (4) upward or downward to the desired position, release the Adjustment Knob (23) into an adjustment hole in the Handlebar Post, and then tighten the Adjustment Knob. Move the Handlebar Post (4) upward or downward slightly to make sure that the Adjustment Knob (23) is firmly engaged in an adjustment hole in the Handlebar Post. 3 4 3. Identify the Right Pedal (35), w ...

7 1 Rear Stabilizer 8 1 Front Stabilizer 9 1 Brake Lever 10 1 Felt Washer 11 1 Resistance Knob 12 1 Left Crank Arm 13 7 Self-tapping Screw 14 1 Right Shield 15 1 Left Shield 16 4 Leveling Foot 17 2 Seat Post Bushing 18 4 Stabilizer Cap 19 3 Post Cap 20 1 Shield Cover 21 2 Wheel 22 1 Seat 23 3 Adjustment Knob 24 1 Brake Cap 25 1 Frame Cap 26 2 6.5mm Plastic Spacer 27 5 T1 Nut 28 1 Chain 29 2 Bracket Washer 30 1 Crank Axle 31 1 Right Crank Arm/Crank Wheel 32 2 Crank Cap 33 6 M10 Washer 34 6 M10 x 25mm ...

Locate the Adjustment Knob (23) on the front of the Frame (1). Loosen the Adjustment Knob, pull it outward, and insert the Handlebar Post (4) into the Frame. Next, move the Handlebar Post (4) upward or downward to the desired position, release the Adjustment Knob (23) into an adjustment hole in the Handlebar Post, and then tighten the Adjustment Knob. Move the Handlebar Post (4) upward or downward slightly to make sure that the Adjustment Knob (23) is firmly engaged in an adjustment hole in the Handlebar Post. 3 4 3. Identify the Right Pedal (35), w ...

HOW TO ADJUST THE SEAT To adjust the position of the seat, first loosen the adjustment knob and pull the adjustment knob downward. Next, move the seat forward or backward to the desired position. Then, release the adjustment knob into an adjust- ment hole in the seat carriage and firmly tighten the adjustment knob. Make sure that the adjustment knob is engaged in an adjustment hole. HOW TO ADJUST THE SEAT POST For effective exercise, the seat should be at the proper height. As you pedal, there should be a slight bend in your knees when the pedals are in the lowe ...

as shown. See the inset drawing. Attach the Seat (22) to the Seat Carriage (3) with two M8 Hex Nuts (66). Make sure that the nose of the Seat is pointing straight ahead before you tighten the Hex Nuts. Locate the Adjustment Knob (23) on the Seat Post (2). Loosen the Adjustment Knob, pull it downward, and insert the Seat Carriage (3) into the Seat Post. Slide the Seat Carriage (3) to the desired posi- tion, release the Adjustment Knob (23) into an adjustment hole in the Seat Carriage, and then tighten the Adjustment Knob. Make su ...

as shown. See the inset drawing. Attach the Seat (22) to the Seat Carriage (3) with two M8 Hex Nuts (66). Make sure that the nose of the Seat is pointing straight ahead before you tighten the Hex Nuts. Locate the Adjustment Knob (23) on the Seat Post (2). Loosen the Adjustment Knob, pull it downward, and insert the Seat Carriage (3) into the Seat Post. Slide the Seat Carriage (3) to the desired posi- tion, release the Adjustment Knob (23) into an adjustment hole in the Seat Carriage, and then tighten the Adjustment Knob. Make su ...

ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires an adjustable wrench and a Phillips screwdriver . Note: If a part is not in the hardware kit, check to see if it has been preattached. 1. Remove the two screws (not shown), the two washers (not shown), and the shipping bracket (not shown) from the rear of the Frame (1). Discard the screws, washers, and shipping bracket. Identify the Rear St ...