Nordpeis S-31A Operation & User’s Manual

the air vent control. FIG 7 The insert is delivered prepared for top connection. If the insert is to be connected at the back, the flue outlet collar must be placed according to FIG 8 FIG 8 Remove the cutout at the back of the radiation shield (A). Remove the flue outlet cover and smoke outlet collar (B). Mount the flue outlet collar on the back outlet and fit the flue outlet cover over the top outlet (C). The insert can now be connected at the back. Connection of the flue Please be aware when connecting the 150 mm flue to the s ...

Error Explanation Solution No draught The chimney is blocked. Contact a chimney sweeper / dealer for more information or clean the flue, smoke baffle and burn chamber. The flue is sooty or there is accumulated soot on the smoke baffle. The smoke baffle is wrongly positioned. Verify the assembly of the smoke baffle - see assembly instructions. The insert release smoke when lighting the fire and dur- ing combustion Downdraught in the room caused by no draught, that the house is too “air tight”. Light the fire with an open window. If this helps ...

9 Chimney draught 9 Air Supply 9 2. Technical information 10 3. Distance to combustible material  10 4. Assembly  10 Connection of the flue 11 Operational control 11 Painting the surround 11 5. Lighting the fire for the first time  11 6. Maintenance  11 Cleaning and inspection 11 Ashes 11 Thermotte™ plates 12 Door and glass 12 7. Warranty 12 8. Advice on lighting a fire 12 Some advice in case of combustion problems 14 INDEX 1. Prior to assembling the insert All our products are tested according to the latest European requirements and also ...

vent and have the door slightly ajar in order for the flames to establish properly on the wood. Note that the air supply for the combustion also can be too large and cause an uncontrollable fire that very quickly heats up the whole combustion chamber to an extremely high temperature (when using with a closed or nearly closed door). For this reason you should never fill the combustion chamber completely with wood. It is recommended to keep an even fire with a small amount of wood. Too many logs put on hot ember, may result in combustion ...

the air vent control. FIG 7 The insert is delivered prepared for top connection. If the insert is to be connected at the back, the flue outlet collar must be placed according to FIG 8 FIG 8 Remove the cutout at the back of the radiation shield (A). Remove the flue outlet cover and smoke outlet collar (B). Mount the flue outlet collar on the back outlet and fit the flue outlet cover over the top outlet (C). The insert can now be connected at the back. Connection of the flue Please be aware when connecting the 150 mm flue to the s ...