Mitel 6867i Administrator's Manual

A-121 PARAMETER – sip silence suppression CONFIGURATION FILES startup.cfg, .cfg, .cfg DESCRIPTION Silence suppression is enabled by default on the IP phones. The phone negotiates whether or not to use silence suppression. Disabling this feature forces the phone to ignore any negotiated value. FORMAT Boolean DEFAULT VALUE 1 (enabled) RANGE 0 (disabled) 1 (enabled) EXAMPLE sip silence suppression: 0 PARAMETER – sip remove silence suppression offer CONFIGURATION FILES startup.cfg, .cfg, .cfg DESCRIPTION Specifies whether or n ...

4-67 The IP phone issues a DNS query for an SRV record when the IP address of the server is FQDN and the corresponding port is 0. For example, if the phone is configured with sip proxy ip of "ana.mitel.com", and sip proxy port of "0", the SRV lookup may return multiple servers, based on the priorities if one is selected as primary and others are selected as secondary. However, if the IP address is an FQDN and the corresponding server port is non-zero, then the phone issues a DNS "A" Name Query to resolve the FQDN into dot notation f ...

A-17 EMERGENCY DIAL PLAN SETTINGS PARAMETER – emergency dial plan CONFIGURATION FILES startup.cfg, .cfg, .cfg DESCRIPTION Allows you to specify an emergency number to use on your IP phone so a caller can contact emergency services in the local area when required. The default emergency numbers on the IP phones is 911, 999, 112, and 110. 911 - A United States emergency number. 999 - A United Kingdom emergency number. 112 - An international emergency telephone number for GSM mobile phone networks. In all European Union countries it is also ...

1. Press on the phone to enter the Options List. 2. Press the Credentials icon. 3. Press the left and right arrow keys to navigate to the desired Directory source tab (e.g. LDAP, Microsoft Exchange, BroadSoft Xsi). 4. In the Username field enter in the username applicable to the Directory source. 5. In the Password field enter in the password applicable to the Directory source. 6. Press the Directory source tab and repeat Steps 3 to 5 for any other sources you want to configure. 7. Press the Directory source tab, and press the right arrow key until yo ...