Pro-Ject Audio Systems CD Box S Instructions For Use
Text of the manual
© Audio Trade GmbH · Pro-Ject CD Box · Revision 2012.3.1
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO CD Box S.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Caution! Laser diode
This product
© Audio Trade GmbH · Pro-Ject CD Box · Revision 2012.3.1
3
Remote control
1
2
3
6
9
8
5
4
7
0
VOL+
VOL-
ON/OFF
STOP
+10
To switch on from standby or to standby
1
ON/OFF
turns the unit on or back into standby
Volume control
0
_
VOL
or 0 +
VOL
adjust the sound volume of your Pro-Ject Audio amplifier
Stop
STOP stops playback
Play / Pause
8
starts and pa
© Audio Trade GmbH · Pro-Ject CD Box · Revision 2012.3.1
4
Front panel controls
CD Box S
A
B
C
D
To switch on from standby or to standby
A short press of the push button C switches the player to its fully operational status. To return to standby,
press C for more than three seconds. The display shows STANDBY when the unit is in standby.
To switch to stand
© Audio Trade GmbH · Pro-Ject CD Box · Revision 2012.3.1
5
Replacing batteries
Proceed as follows:
Unlock and slide open the battery case cover
Replace the battery.
Make sure the battery is the right way round !
Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domes
