Pureit CLASSIC Quick Start Instructions

For any help on Pureit Installation or Usage, Call Pureit Helpline : 0816 4637155 / 0808 6470123 / 0805 5085566 Pureit Helpline: 0816 4637155 0808 6470123 0805 5085566 Pureit Website: www.pureitwater.com Complete Germ Protection Complete Germ Protection

purifier. The name of different components are shown alongside the image. This will help you better understand the instructions in the rest of this booklet. 1 2 4 5 11 12 10 13 14 16 3 15 7 8 9 6 Get to know your Pureit 1. Window 2. Microfibre Mesh 3. Top Lid Cover 4. Top Lid 5. Top Chamber 6. Activated Carbon Trap 7. Germkill Life Indicator Cover 8. Germkill Processor 9. Germkill Life Indicator 10. Auto Shut-off Mechanism 11. Batching Chamber 12. Polisher 13. Transparent Chamber 14. Cleansing - Collection chamber 15. Tap 16. Pedestal (optional)

Please carefully read and follow these simple steps for setting up your Pureit home water purifier. Lift the bottom half (recognized by its large Transparent Chamber). Transparent chamber Next to the Transparent Chamber in the box, you will find the other half of the purifier, packed in a plastic cover. Unpack the plastic cover. You will now find two chambers one on top of the other - the Top Chamber & the Batching Chamber below it. Setting up Pureit Keep the Transparent Chamber on a flat table and then remove the transparent cling film. Note : Please ensure that your hands are clean and germ free. DO NOT touch the inside walls of the Transparent Chamber with your hands.

The Top Chamber has a Top Lid. Remove the Top Lid from Top Chamber. Inside the Top Chamber you will find a loose plastic object which is called the 'Bellow Pump'. Note : Take the Bellow Pump out of the Top Chamber. Store the Bellow Pump at a safe place as you may need it over time while cleaning the Activated Carbon Trap. Bellow pump Remove the cover on the Top Lid. You will see the white Microfibre Mesh inside. Pour water into the Microfibre Mesh until the Top Chamber is full. You can see the water level by looking through the transparent window in the Top Lid. Note: Please ensure that you fill the Top Chamber to the brim. Microfibre Mesh Now lift the Top Chamber and the Batching Chamber together. Place it on the Transparent Chamber. Please ensure that the protruding tube in the Batching Chamber fits snugly into the opening of the Transparent Chamber. Tube Opening

Now lift the (empty) Top Chamber and place it on the Batching Chamber. To start using, fill water in the Top Chamber now. Drain away the first batch of water that collects in the Transparent Chamber. Now refill Top Chamber. Water that collects in the Transparent Chamber is now ready for drinking You may have also purchased a pedestal for your Pureit. In case you want to place Pureit on the pedestal follow these steps : Place pedestal on a flat table such that the curved surface is facing the bottom. Note: Before installing pedestal make sure there is no water inside Pureit, else it will be heavy to lift and water may spill. Now place the (empty) Transparent Chamber of Pureit on top of the pedestal such that the legs below Transparent Chamber fit snugly inside the pedestal frame. 4 Setting up Pureit on a Pedestal (optional) Pedestal Curve of Pedestal Note : Drain away the first batch of water that collects in the Transparent Chamber through the tap. Once you have filled the Top Chamber with water (9 liters); it will take about an hour for this water to get purified and collect in the Transparent Chamber. Now refill the Top Chamber. Water that gets collected now in the Transparent Chamber is ready for drinking. Your Pureit is now ready for use. Note: When you fill the purifier for the first time, you will see less water in the Transparent Chamber as compared to the 9 liters of water you poured in the Top Chamber. However, from second filling cycle onwards, full 9 liters of water will collect in the Transparent Chamber. Please read the detailed "Instructions Manual" carefully before you start using Pureit.