TriMark e-Ask e-FOB System Instructions

ee--FOB FOB RF Keyless RF Keyless--entry entry System Instructions System Instructions (UM02 ~ 19571-02)

Introduction .................................................................................. 1 e-FOB Operation and Features ................................................... 2 Teaching Additional Fob Transmitters ...................................... 3 Smart Led .................................................................................. 4 Dip Switch Setting Assignment .................................................. 4 DIP Switch #1: Sustained Output .............................................. 4 DIP Switch #2: Horn/Panic Mode .............................................. 4 DIP Switch #3: Automatic Lock/Unlock ..................................... 5 DIP Switch #4: Parking Light Supervision ................................. 5 DIP Switch #5: Staggered Lock/Unlock ..................................... 5 Additional System Features ........................................................ 5 Light Activation .......................................................................... 5 2nd Unlock Output ..................................................................... 5 Panic Mode ................................................................................ 5 Vehicle Alarm ............................................................................ 6 Valet Mode ................................................................................ 6 In-Vehicle Valet Activation .............................................................. 6 Remote Valet Activation ................................................................. 6 Deactivate Horn Chirp ............................................................... 6 Starter Kill Feature ..................................................................... 7 Emergency Override .................................................................. 7 Troubleshooting ........................................................................... 8 Appendix: Installation and Mounting e-FOB System ............... I General Mounting Guidelines .................................................... I Wiring Color Code Tables and Diagrams .................................. I RF Receiver ................................................................................... I Wiring Connections for Basic System Functions ....................... IV

use of TriMark’s e-FOB transmitter/receiver system. Basic functions of the system include:  Locking and unlocking doors  Light activation  Panic mode  Auxiliary functions based upon configuration (see page 4) The e-FOB system includes:  Receiver  2 FOB transmitters  14-pin wire harness  10-pin wire harness  4-pin wire harness  Smart LED  Push button switch  Starter kill wires The receiver and FOB transmitters are shipped programmed. After making all necessary wiring connections (see appendix page IV), the e -FOB system will function as indicated in this manual. 1

Notes:  While the engine is running only the entry unlock function of the e-FOB remains activated —other functions are deactivated.  For information on changing the default configuration, see DIP Switch Setting Assignment on page 4. Lock button Horn button * button Unlock button 2 Button Function Lock Locks all entry doors and arms security system. Unlock Unlocks entry doors and disarms security system. Also activates the porch light. Horn Activates panic mode when pressed and held for 2 seconds. * button auxiliary output * button function is OEM/dealer defined. Possible assignment include: interior/exterior lighting, awning extension/retraction, gas cap, hood, etc.

1. Plug the smart LED into CN4 and the push button into CN5. 2. Apply +12 V to the yellow wire. 3. Press and hold the push button switch until the LED assembly turns on and then off (about 5 seconds). 4. Press the Lock button of each new FOB transmitter once (do not hold button). Up to 4 transmitters may be programmed at one time. 5. Disconnect the yellow wire and verify proper e-FOB transmitter and receiver reception. Notes:  If you place the system in learn mode and teach nothing, the system will exit in 10 seconds.  If the 4-transmitter limit is exceeded, the system erases the earliest trained transmitter. To erase a lost remote, teach the remaining or new remotes a total of 4 times.  It is recommended to teach all transmitters at the same time. This eliminates the potential to erase an earlier trained trans- mitter. Hold the FOBs at least 2 feet away from the controller during training.  The memory for codes is NON-VOLATILE and will not be erased if power is removed. 3