Pace Charter Installation Process & User Manual
Text of the manual
Customer Care 1-800-314-7195
charter.com
This guide is intended for owners or managers and front desk personnel.
This guide is not intended for tenants.
Thank you for choosing Charter Communications
DTA Installation Process & User
Guide for Charter consumer bulk tv
Thank you for choosing Charter Communications
This document details the steps a property manager should take to install Digital Transport Adapters (DTAs). DTAs are small,
digital devices that will allow TVs to show programming delivered by Charter’s digital network. Any TVs that are not connected to
a digital device (either a DTA or other digital receive
Thank you for choosing Charter Communications
b. If you have an SD or analog TV, connect one end of the 3-foot coax cable to the “To TV” input on the back of the DTA.
Connect the other end to the “Cable In/RF In” input on the back of your TV.
3. Power Up
a. Connect the external power supply unit to the connector marked “Power” on the DTA.
b. C
Thank you for choosing Charter Communications
4. Set the Channel (if using an HDTV, proceed to step 5)
a. Turn on your TV and tune it to channel 3.
b. Set the switch on the back of the DTA to channel 3.
Note: Some parts of the country use channel 4. If you do not have a picture after completing this step, you may need to
switch both your TV and the DTA to
Thank you for choosing Charter Communications
Option 3: Code Search Method
a. Manually turn the TV on.
b. Press and hold SETUP
SETUP on the remote control until the LED blinks twice.
c. Press and hold down OK/ENTER
OK
ENTER .
d. Release the button when the TV turns off. Setup is complete.
e. Test the remote to ensure the buttons now control the TV and
