Panasonic RX-ES29 Operating Instructions Manual

Model No. RX-ES29 Table of Contents Supplied Accessories...........................................2 Precautions ..........................................................2 CD Selection ........................................................2 IMPORTANT SAFETY INSTRUCTIONS..............3 Location of Controls .............................................4 Use of Batteries....................................................6 Power Sources .....................................................6 Memory Batteries.................................................6 The Radio.............................................................7 CDs and MP3.......................................................8 Cassette Tape Play.............................................10 Cassette Tape Recording...................................10 Setting the Clock ................................................12 The Play and Record Timer ...............................12 The Sleep Timer.................................................13 Sound Quality.....................................................14 3-D Sound with the Sound Virtualizer ................14 Maintenance.......................................................15 Troubleshooting ..................................................16 Specifications .....................................................16 Warranty.............................................................17 Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. RQT7967-1Y [_PC_]

For optimum performance and safety, please read these instructions carefully. User memo: Supplied Accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of January 2005. These may be subject to change.) Remote control transmitter (N2QAHB000048).............1 pc. AC power supply cord (polarized).........................1 pc. (K2CB2CB00006) Note: ≥The included AC power supply cord is for use with this unit only. Do not use it with other equipment. Precautions CD Selection Choose CDs with this mark: (A). This unit can play CD-DA (digital audio) format audio CD-R and CD-RW that have been finalized (a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW) upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. Do not ≥use CDs with irregular shapes. ≥use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. ≥attach scratch-proof covers or any other kind of accessory. ≥write anything on the CD. ≥clean CDs with liquids. (Wipe with a soft, dry cloth.) ≥use CDs printed with label printers available on the market. The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER RX-ES29 SERIAL NUMBER DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. Inside of product CAUTION A

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11)Only use attachments/accessories specified by the manufacturer. 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Product Service 1. Damage requiring service — The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing — Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts — When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check — After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. Product information For product information or assistance with product operation: Contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or vist the website (www.panasonic.ca), or an authorized Servicentre closest to you. Listening Caution Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion--and, most importantly, without affecting your sensitive hearing. We recommend that you avoid prolonged exposure to excessive noise. Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: ≥Start your volume control at a low setting. ≥Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: ≥Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. EST. 1924

(not included) Location of Controls Main Unit 1 Deck 2 Deck eject button (< DECK) .................................(l 10) • Press [< DECK] to open the deck. (The unit comes on.) Then, load a cassette and close the deck by hand. 3 Record/record pause button (¥/;) ................(l 10, 11) 4 Cassette play button (1TAPE)..............................(l 10) • Press [1TAPE] to start play. 5 Band button (TUNER BAND) ...................................(l 7) • Press [TUNER BAND] to select “FM” or “AM”. 6 CD play/pause button (CD 1/;).........................(l 8, 9) • Press [CD 1/;] to start play. Plays to the end of the CD and stops. • Press [CD 1/;] to pause halfway during play. Press again to resume play. 7 CD recording mode button (CD REC MODE)....... (l 11) 8 Play timer/record timer button ( PLAY/REC) .... (l 13) 9 Clock/timer button (CLOCK/TIMER) ............... (l 12, 13) : CD program/clear, tuner preset button ( MEMORY CLEAR) ........................................... (l 7, 9) ; Speaker Note: • These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. < Standby/on switch ( ) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. = Sound equalizer button (SOUND EQ)................... (l 14) > Tuning/CD search, Rewind/fast-forward, Album skip buttons (REW/–/6, 5/+/FF)..................... (l 7, 8, 10) POWER POWER Remote Control 1 Transmission window Aim at the sensor, avoiding obstacles, at a maximum range of 7 meters directly in front of the unit. 2 Sleep timer button (SLEEP)...................................(l 13) 3 Numeric buttons...............................................(l 7, 8, 9) 4 CD/MP3 play mode/FM mode button (PLAY MODE)..............................................(l 7, 8, 9, 11) 5 Auto scan button (AUTO SCAN)..............................(l 7) 6 Display select button (DISPLAY).....................(l 10, 12) • Press [DISPLAY] to display the clock on the Display panel B. 7 Preset channel select/album skip buttons (C/: ALBUM, ALBUM9/D).......................(l 7, 8) 8 Tuning/CD skip, search/MP3 track skip/clock/timer adjust buttons (–/:, 9/+)...................(l 7, 8, 9, 12) 9 MP3 intro play button (INTRO) ................................(l 9) : Tape counter reset button (C.RESET) ..................(l 10) • Press [C.RESET] to reset the tape counter. The counter resets to “000”. ; Tape rewind/fast-forward buttons (6/REW, 5/FF )................................................(l 10) < Sound virtualizer button (S.VIRTUALIZER)..........(l 14) When the unit is supplied with AC Power, the button such as 4 function in the same way as the controls on the main unit. To save power, the unit cannot be turned on from the remote control when batteries are used.

(∫ TAPE/CD) .............................................(l 8, 9, 10, 11) • Press [∫ TAPE/CD] to stop play. @ Time adjust, Preset channel select/CD track select dial (TIME/PRESET TUNE TRACK SKIP )...................... ...............................................................(l 7, 8, 9, 11, 12) A Volume control buttons (+, – VOLUME)........(l 7, 8, 10) • Press [+, – VOLUME] to adjust to the desired volume for CD, Tuner or Cassette. B Display panel C CD tray open/close button (< CD) ................... (l 8, 11) • Press [< CD] to open the tray. (The unit comes on.) Load a CD and press [< CD] to close the tray. D CD tray E Remote control signal sensor (SENSOR) 30° 30° 7 m Use ≥Keep the transmission window and the unit’s sensor free from dust. ≥Operation can be affected by strong light sources, such as direct sunlight, and the glass doors of cabinets. Batteries Insert so the poles (+ and –) match those in the remote control. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Replace if the unit does not respond to the remote control even when held close to the front panel. To Use Headphones (not included) Reduce volume before connection. Plug type: 3.5 mm (1/8 in.) stereo Note: ≥Avoid listening for prolonged periods of time to prevent hearing damage. PHONES PHONES e.g. CD Do not ≥put heavy objects on the remote control. ≥take the remote control apart. ≥spill liquids onto the remote control.

≥If this unit is not used for a long period of time or is used only from an AC power source, remove all the batteries to prevent potential damage due to possible battery leakage. ≥Align the poles (+ and –) correctly when inserting the batteries. ≥Do not mix old and new batteries or different types of batteries. ≥Do not recharge ordinary dry cell batteries. ≥Do not heat or disassemble the batteries. Keep them away from flame or water. ≥Do not keep together with metallic objects such as necklaces. ≥Do not use rechargeable type batteries. ≥Do not use batteries if the covering has peeled off. Mishandling of batteries can damage other items, cause damage to the unit, and may cause a fire through short-circuiting or electrolyte leakage. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. Power Sources To operate the unit on AC power (1) Connect the AC power supply cord. Conserving power The unit consumes 2.7 W even when it is turned off with [ ]. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. Remember to reset the radio stations and any other memory items before using the unit again if you haven’t inserted memory batteries. 1: Household AC outlet (AC 120 V, 60 Hz) 2: AC power supply cord (included) To use batteries (not included) (2) Disconnect the AC power supply cord from unit to operate on battery power. The remote control cannot turn the unit on when batteries are used. To remove the batteries [A] Open the battery cover, insert a finger into the hole in the bottom of the unit and push the batteries out. Memory Batteries Memory batteries retain memory (clock/timer/CD/radio settings) during power supply interruption. These batteries do not power the unit. * Memory batteries are not included. To replace the batteries (3) ≥The memory batteries last for about 1 year. ≥Connect the unit to AC power before replacing the batteries. ≥Extend the memory battery life by always pressing [ ] to turn the unit off before disconnecting the unit from the AC power source or replacing the power batteries. To remove the batteries (4) Lift the negative end of the number 4 battery to remove batteries. POWER POWER Battery life “ ” flashes on the display when the batteries are running down. Then, the unit turns itself off and displays “U01”. Replace all the batteries with new ones. POWER POWER (1) AC IN 2 1 2 1 3 4 (3) (R6/LR6, AA, UM-3) (R20/LR20, D, UM-1) 5 1 2 4 3 6 8 7 (2) [A] outer row inner row (4) 1 2 4 3

]. ≥Press [TUNER BAND] to select “FM” or “AM”. Manual tuning [1] Press [REW/–/6] or [5 /+/FF] to select a station. To tune automatically Press and hold [REW/–/6] or [5/+/FF] until the frequency starts changing rapidly. ≥Auto tuning may be interrupted when there is excessive interference. ≥To cancel auto tuning, press [REW/–/6] or [5/+/FF] once again. [2] Press [+, – VOLUME] to adjust volume. To use auto scan You can search for a station by listening to all tuned-in stations for 8 seconds each. [1] Press [AUTO SCAN]. [2] Press [AUTO SCAN] when you find the desired station. Auto scan ends when it reaches the original frequency again. To stop during the process, press [AUTO SCAN]. To improve FM sound quality Press [PLAY MODE] to display “ ”. Monaural sound is selected and noise reduces when reception is weak. Press [PLAY MODE] again to cancel the mode. ≥To improve reception FM : Change the length and direction of the antenna. AM : Change the direction of the unit. ≥ AM reception is briefly interrupted if [< DECK] is pressed. ≥To improve reception when using the unit in a building or vehicle, place it near a window. To receive FM broadcasts allocated in 0.1MHz Main unit only First press [TUNER BAND] to select “AM”. Now, press and hold [TUNER BAND]. The display changes in a few seconds to show the current lowest FM frequency. Continue to hold down the button. The minimum frequency changes and the step is changed at the same time. Changing the step erases all preset stations. Repeat the above to change the step back. Preset tuning Up to 16 stations can be set in the FM and AM band. [1] Press [REW/–/6] or [5/+/ FF] to tune to the required station. [2] Press [ MEMORY CLEAR]. [3] While “ ” is flashing Turn [TIME/PRESET TUNE TRACK SKIP ] to select the channel and press [ MEMORY CLEAR] or on remote control, press the numeric buttons to select channels. ≥For channels 1 to 9, press the corresponding number. ≥For channels 10 to 16, press [S10], then the two digits. If “ ” goes off during presetting, return to step [1]. To select channels Turn [TIME/PRESET TUNE TRACK SKIP ] to select the channel or on remote control, press the numeric buttons to select channels. To use preset scan You can search for a station by listening to all preset channels for 8 seconds each. [1] Press and hold [C/: ALBUM] or [ALBUM 9/ D] until “PS” appears on the display. [2] Press [C/: ALBUM] or [ALBUM 9/D] when you find the desired channel. Preset scan ends after searching through each preset channel once. To stop during the process, press [C/: ALBUM] or [ALBUM 9/D]. To skip the preset channel, 1 Select the desired station. 2 Press [ MEMORY CLEAR]. 3 While “ ” is flashing Turn [TIME/PRESET TUNE TRACK SKIP ] to display “– –”. 4 Press [ MEMORY CLEAR]. To select the skipped channel, Press the numeric buttons. VOLUME REW POWER POWER POWER AM FM

To play a disc [CD-DA] [MP3] [1] Press [< CD] to open the tray. (The unit comes on.) ≥Label must face upward (l right). ≥Load a CD and press [< CD] to close the tray. [2] Press [CD 1/;] to start play. Plays to the end of the CD and stops. When playing MP3, “MP3” is displayed. A: Track number B: Elapsed play time [3] Press [+, – VOLUME] to adjust volume. One touch play (when using AC power) When a CD is loaded, press [CD 1/;]. * For skip tracks and skip album, Press [CD 1/;] to start play if in the stop mode. Note: ≥Keep this unit away from radios and televisions if interference occurs. Advanced CD and MP3 Functions Preparation: Press [∫ TAPE/CD] to switch to CD mode. Remote control only Direct access play [CD-DA] [MP3] ≥Starts play from a selected track. ≥Press the numeric buttons to select and play your desired track. For 2-digit number: press [S10] once, then the 2 digits. For 3-digit number: press [S10] twice, then the 3 digits. Repeat play and Random play [CD-DA] ≥Repeat : plays a track or all tracks repeatedly. ≥Random: plays each track once in the random order. Press [PLAY MODE] to select the desired mode. ≥Press [CD 1/;] to start play if in the stop mode. ≥Random can only be selected in the stop mode. ≥The play mode is also canceled if the CD tray is opened. Notes: (For Random Play) ≥Random play cannot be used together with program play. ≥Search can only be done within the current playing tracks. ≥During play you cannot select tracks with the numeric buttons and skip to tracks which have already been played. To Operations stop play Press [∫ TAPE/CD]. pause play Press [CD 1/;] during play. skip tracks* Turn [TIME/PRESET TUNE TRACK SKIP ] clockwise (forward) or counter-clockwise (backward). On remote control, press [–/:] or [9/+]. search through tracks [CD-DA] Press and hold [REW/–/6] or [5/+/FF] during play. On remote control, press and hold [–/:] or [9/+] during play. skip album [MP3] * Press [REW/–/6] or [5/+/FF]. On remote control, press [C/: ALBUM] or [ALBUM 9/D]. VOLUME CD REW TAPE ⁄ CD A B e.g. MP3 To Operations repeat the desired track Press [PLAY MODE] to select “ ”. repeat programmed tracks 1 Start program play. (l 9) 2 Press [PLAY MODE] to select “ ”. cancel repeat play Press [PLAY MODE] until “ ” and “ ” are cleared. cancel random play Press [PLAY MODE] to clear “ ”. If canceled during play, play continues to the end of the CD. : (1 track-repeat) (No display) : (All-track repeat) # ] n , (=== ] n , ===

You can play ( ) or repeat play ( ) tracks only in the selected album. Press [PLAY MODE] before or during playback to select the desired mode. ≥( ): play all tracks in the selected album one time. ≥( ): play all tracks in the selected album repeatedly. ≥You can select another album with album skip. ≥You cannot use random play with MP3. MP3 Intro play Intro functions allow you to start playing the 1st track of all albums for 10 seconds each in the stop mode. Press [INTRO] to start intro play. Intro function is canceled after playing the 1st track of last album in the disc. To stop during the process, press [INTRO] or [∫ TAPE/CD]. Program play [CD-DA] [MP3] You can program up to 24 tracks. On the main unit Preparation: Press [∫ TAPE/CD] to switch to CD stop mode. [1] Turn [TIME/PRESET TUNE TRACK SKIP ] to select the track. [2] Press [ MEMORY CLEAR]. C: Programmed track D: Play sequence [3] Repeat steps [1] and [2] to program other tracks. [4] Press [CD 1/;] to start play. On the remote control Preparation: Press [STOP ∫] to switch to CD stop mode. [1] Press [PROGRAM/ CLEAR]. “ ” appears on the display. [2] Press the numeric button(s) to select the desired track. For 2-digit number: press [S10] once, then the 2 digits. For 3-digit number: press [S10] twice, then the 3 digits. Repeat this step to program other tracks. [3] Press [CD 1/;] to start play. The program remains intact even if play is stopped or the unit is turned off. “Cd-P” for [CD-DA] or “P” for [MP3] appears when play is stopped to indicate the contents are in the memory. * The mode is also canceled if the CD tray is opened. Notes: ≥“FULL” is displayed If 24 tracks have already been programmed. ≥“– –:– –” is displayed [CD-DA] You can still program and play tracks if the total elapsed play time of the program exceeds 200 minutes. This unit can play MP3, a method of compressing audio without affecting audio quality. ª When creating MP3 files to play on this unit Disc format: ISO9660 level 1 and level 2 (except for extended formats) Title names and album names are not displayable on this unit. ª Limitation on MP3 ≥This unit is compatible with multi-session but if there are a lot of sessions it takes more time for play to start. Keep the number of sessions to a minimum to avoid this. ≥This unit cannot play files recorded using packet write. ≥If a CD-ROM format CD contains MP3 and files other than MP3, only the MP3 files will be playable. ≥Depending on how you create MP3 files, they may not play in the order you numbered them or may not play at all. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. OFF (no indication) # # # ] n (==== , To Operations cancel* Press and hold [ MEMORY CLEAR] in the CD stop mode until “CLEAR” is displayed. On remote control, press and hold [PROGRAM/ CLEAR]. check the program contents (while “Cd-P” for [CD-DA] or “P” for [MP3] is displayed) Turn [TIME/PRESET TUNE TRACK SKIP ]. On remote control, press [–/:] or [9/+]. C D e.g. MP3

[1] Press [< DECK] to open the deck. (The unit comes on.) Load a cassette and close the deck by hand. A: Side to be played back facing up. B: Insert the cassette with the exposed tape facing you. [2] Press [1TAPE] to start play. [3] Press [+, – VOLUME] to adjust volume. * when using AC power. Cassette Tape Recording Before Recording Notes: ≥Use household AC power or new batteries when recording to avoid poor recordings caused by the batteries running down. ≥Televisions can cause interference to recordings made on this unit if they are too close to each other. Selection of tapes Use normal position tapes. High position and metal position tapes can be played, but the unit will not be able to record or erase correctly. Volume and sound quality in recording ≥Recording level is set automatically. ≥Recordings are unaffected by changes to sound quality. To display the tape counter while recording Press [DISPLAY]. Each time you press the button in the CD or radio mode: To reset the tape counter Press [C.RESET]. The counter resets to “000”. Erasure prevention The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown. A Side A B Tab for side “B” C Tab for side “A” D Adhesive tape To erase recordings 1 Press [< DECK] to open the deck and insert the cassette with the side to be erased facing up. 2 Press [∫ TAPE/CD] to switch to TAPE mode. 3 Press [¥/;]. Recording CDs Normal recording Preparation: Wind on the leader tape. [1] Press [< DECK] to open the deck. [2] Press [∫ TAPE/CD] to switch to CD mode. [3] Press [¥/;] to start recording. CD play and recording start at the same time. The cassette stops when the CD finishes. To Operations stop play Press [∫ TAPE/CD]. start one touch play* Press [1TAPE] when a cassette is loaded. fast-forward Press [5/+/FF]. On remote control, press [5/FF]. rewind Press [REW/–/6]. On remote control, press [6/REW]. REW TAPE ⁄ CD VOLUME A B Present state Present time Tape counter # # ] n ========== ] n , ===== A B C A D

finishes before CD, recording and CD pauses for you to resume recording on the opposite side. [1] Press [∫ TAPE/CD] to switch to CD mode. [2] Press [CD REC MODE] to display “ALL-REC”. Each time you press the button: The display shows the tape length needed. “C – – – –” indicates the tape needed exceeds 100 minutes. You can still record, but some tracks may not be recorded if the tape is not long enough. [3] Press [< DECK] to open the deck and load a cassette with the side for recording facing up. [4] Press [¥/;] to start recording. The unit rewinds the tape, records 10 seconds of silence, and then starts recording. To stop recording, press [∫ TAPE/CD]. The CD also stops. If a track is interrupted at the end of the side facing up, Recording and CD pauses. * The unit records 10 seconds of silence, and resumes recording from the beginning of the cut-off track. Note: ≥Random play and repeat play cannot be used with “ALL-REC”. 1-REC [CD-DA] [MP3] Records a selected track from the CD and stops. Preparation: Wind on the tape to where you want to start recording. [1] Press [∫ TAPE/CD] to switch to CD mode. [2] Press [CD REC MODE] to display “1-REC”. [3] Turn [TIME/PRESET TUNE TRACK SKIP ] to select the track you want to record. [4] Press [¥/;] to start recording. CD play and recording start at the same time. Note: ≥Recording and CD will stop when the tape reaches its end, even if the track has not finished. Recording the Radio Preparation: To record from the beginning of the tape; Wind on the leader tape. To record from part or half way through the tape; Wind on the tape to where you want to start recording. [1] Load a cassette with the side for recording facing up. [2] Tune to the station. [3] Press [¥/;] to start recording. To reduce noise when recording AM (Beat Proof function) Remote control only 1 Press [PLAY MODE] while recording. Each time you press the button: bP1 ,-. bP2 Choose the setting with the least noise. To Operations stop recording Press [∫ TAPE/CD]. pause recording Press [¥/;]. continue recording from another CD on the same cassette 1 Press [< CD] and replace the CD. 2 Press [¥/;]. Press again to resume recording. record selected tracks 1 Do step [1] and [2], then program the tracks. (l 9) 2 Press [¥/;]. skip unwanted tracks 1 Press [¥/;] to pause recording. (The CD also pauses.) 2 Turn [TIME/PRESET TUNE TRACK SKIP ] so the next track you want to record is displayed. 3 Press [¥/;] to resume recording. To Operations record the track again on the opposite side 1 Press [< DECK], flip the cassette, and insert it. 2 Press [¥/;]*. To Operations stop recording Press [∫ TAPE/CD]. (The CD also stops.) continue recording from another CD 1 Press [< CD] and replace the CD. 2 Do steps [3] and [4]. record a track in play 1 Press [CD REC MODE] to display “1-REC”. 2 Press [¥/;]. Recording starts from the beginning of the track and stops when the track finishes. To Operations stop recording Press [∫ TAPE/CD]. pause recording Press [¥/;]. Press again to resume recording.

This is a 12-hour clock. [1] Press [ ] to turn the unit on. [2] Press [CLOCK/TIMER] to select “CLOCK”. Each time you press the button: [3] Within 10 seconds Turn [TIME/PRESET TUNE TRACK SKIP ] to set the time or on remote control, press [–/:] or [9/+]. [4] Press [CLOCK/TIMER] to start the clock. The original display is restored shortly after. Note: ≥The clock may lose or gain some time over a period. Readjust if necessary. To display the clock Remote control only Press [DISPLAY]. The Play and Record Timer You can set the timer to come on at a certain time to wake you up (play timer) or to record a radio station (record timer). Preparations: Turn the unit on and set the clock. For play timer, prepare the music source (tape/CD/radio) for listening, and set the volume. For record timer, check the cassette’s erasure prevention tab (l 10) and load the cassette with the side for recording facing up. Tune to the radio station (l 7), and set the volume. To set the start and finish times [1] Press [CLOCK/TIMER] to select the desired timer function. ON PLAY: to set the play timer ON REC : to set the record timer Proceed to step [2] before these indicators stop flashing (about 10 seconds). [2] Turn [TIME/PRESET TUNE TRACK SKIP ] to set the start time and then press [CLOCK/TIMER]. [3] Turn [TIME/PRESET TUNE TRACK SKIP ] to set the finish time and then press [CLOCK/ TIMER]. The start and finish times are now set. VOLUME TAPE ⁄ CD POWER POWER POWER CLOCK # # # # ] n ( ] n , Original display ON PLAY OFF PLAY ON REC OFF REC

[4] Press [ PLAY/REC] to display the timer indicator. Each time you press the button: PLAY: to turn the play timer on REC: to turn the record timer on (The indicator does not appear if the start and finish times have not been set.) “E” appears if the clock has not been set. [5] Press [ ] to turn the unit off. The unit must be off for timer to operate. The record timer comes on about 30 seconds earlier than the set time. * While the unit is in standby mode and connected to the household mains socket. To change the settings (when unit is on). You can enjoy your desired source after you have set the timer. Turn the unit off before the timer’s start time. Note: ≥The play and record timers cannot be used together. The Sleep Timer Remote control only You can set the unit to turn off after a certain amount of time. (e.g. when you want to fall asleep while listening to music.) Press [SLEEP] to select the time (minutes). Each time you press the button: Notes: ≥You can use sleep timer in combination with play and record timer. ≥Make sure the unit is off before the play and record timer’s start time. ≥Sleep-off time shall have higher priority than timer-off time. To Operations cancel the timer Press [ PLAY/REC]. (l A) check the settings* Press [CLOCK/TIMER]. (l B) A : When the unit is on to clear the timer indicators from the display. (The timer comes on at the set time everyday if the timer is on.) B : The settings are shown in the following order: Start time > Finish time > Music source > Volume > Original display To Operations change the times Do steps [1], [2], [3] and [5]. change the source or volume 1 Press [ PLAY/REC] to clear the timer indicator. 2 Make changes to the source or volume. 3 Do steps [4] and [5]. No display (OFF) # # ] n =========== ] n , ===== PLAY REC POWER POWER To Operations cancel Press [SLEEP] to select “SLEEP OFF”. check the remaining time Press [SLEEP] once. The remaining time is shown for about 5 seconds. change the setting Press [SLEEP] to select the new time.

1 Heavy: Adds punch to rock 2 Clear: Clarifies higher sounds 3 Soft: For background music 4 Vocal: Adds gloss to vocals Press [SOUND EQ] to select a setting. Each time you press the button: 1 Heavy > 2 Clear e v l 3 Soft l v l 4 Vocal l v EQ-OFF (canceled) Note: ≥Changes to sound quality do not affect recordings. 3-D Sound with the Sound Virtualizer Remote control only You can create a three-dimensional sound field when listening to stereo sound. Press [S.VIRTUALIZER]. Press again to cancel. Notes: ≥This feature does not affect recordings. ≥The actual effect depends on the source played. SOUND EQ 1 3 4 2

To clean this unit, wipe with a soft, dry cloth. ≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner crisper sound Clean the heads after every 10 hours of use to assure good quality playback and recording. Use a cleaning tape (not included). Cassette tape care ≥Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. ≥Tape slack can get caught up in the mechanism and should be taken up before the tape is played. ≥Endless tapes can get caught up in the deck’s moving parts if used incorrectly.

indicated in the chart do not solve the problem, refer to the “Product Information” on page 3. Reference pages are shown in this way (l 3). Common problems CD Cassette deck Radio Remote Control Specifications Radio Frequency range FM 87.9s107.9 MHz (200 kHz steps) (ALT) 87.5s108.0 MHz (100 kHz steps) AM 520s1710 kHz (10 kHz steps) CD player Sampling frequency 44.1 kHz Decoding 16 bit linear Beam source Semiconductor laser (wavelength 780 nm) No. of channels 2-channel, stereo Wow and flutter Below measurable limit D/A converter MASH (1 bit DAC) Tape recorder Track system Stereo Monitor system Variable sound monitor Recording system AC bias Erasing system Multi Pole magnet Frequency range Normal position 50s14000 Hz General Speakers 8 cm 5.4 ™ k 2 Jacks Output PHONES: 3.5 mm stereo (16s32 ™) Power requirement AC 120 V, 60 Hz Power consumption: 32 W Battery 12 V [Eight R20/LR20 (D, UM-1) batteries] ≥ Do not use rechargeable type batteries. Memory back-up for computer/clock 6 V [Four R6/LR6 (AA, UM-3) batteries] ≥ Do not use rechargeable type batteries. Dimensions 529 mm (W) k 144 mm (H) k 276 mm (D) (2013/16q k 521/32q k 107/8q) Mass 4.2 kg (9.3 lb) without batteries Notes: ≥Specifications are subject to change without notice. ≥Mass and dimensions are approximate. “E” is displayed. Indicates incorrect operation. Read the instructions. “U01” is displayed. Replace the batteries or use household AC power. (l 6) “U02” is displayed. Power batteries have not been inserted. Insert them or use household AC power. (l 6) CD will not play or CD display is incorrect. Place the CD with label facing up. (l 8) Wait for 1 hour for condensation to dry and try again. Certain sections are not played properly. Clean the CD. (l 2) Replace the CD if it is scratched, warped, or nonstandard. Recording is not possible. If the cassette’s tabs have removed, cover the holes with adhesive tape. (l 10) Poor sound quality. Clean the heads. (l 15) A lot of noise or tuning difficulty. Interference may be caused by other equipment or the use of its remote control. Turn the other equipment off or keep this unit away from them. The remote control does not work. Check to ensure the batteries are inserted correctly. (l 4) Replace the batteries if they are worn. (l 4) The unit cannot be turned on from the remote control. Turn the unit on from the main unit if you are using batteries to power the unit. (l 4, 6) Power consumption in standby mode: 2.7 W

5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect, or at its option, replace the product for a period as stated below from the date of original purchase. LIMITATIONS AND EXCLUSIONS This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty. This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. WARRANTY SERVICE For product operation and information assistance, please contact your Dealer or our Customer Care Centre at: Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca For product repairs, please contact one of the following: ≥Your Dealer who will inform you of an authorized Servicentre nearest you. ≥Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca ≥A Panasonic Factory Servicentre listed below: IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of date of original purchase. Technics Audio Product One (1) year, parts and labour Panasonic Audio & DVD Product One (1) year, parts and labour Accessories including rechargeable batteries Ninety (90) days Richmond, British Columbia Panasonic Canada Inc. 12111 Riverside Way Richmond, BC V6W 1K8 Tel: (604) 278-4211 Fax: (604) 278-5627 Calgary, Alberta Panasonic Canada Inc. 6835-8th St. N. E. Calgary, AB T2E 7H7 Tel: (403) 295-3955 Fax: (403) 274-5493 Mississauga, Ontario Panasonic Canada Inc. 5770 Ambler Dr. Mississauga, ON L4W 2T3 Tel: (905) 624-8447 Fax: (905) 238-2418 Lachine, Québec Panasonic Canada Inc. 3075, rue Louis A. Amos Lachine, QC H8T 1C4 Tel: (514) 633-8684 Fax: (514) 633-8020

Printed in Malaysia RQT7967-1Y F0105Ks1015 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.ca