Panasonic CQ-C1405W Operating Instructions

essories Operating Instructions (English : YFM284C618CA) (êÛÒÒÍËÈ : YFM284C619CA) ( : YFM284C620CA) (Arabic : YFM284C498CA) Q'ty: 1 set Installation Instructions (YFM294C075CA) Q'ty: 1 Installation kit (ZZBISC1101U-J) Lock Cancel Plate (FX0214C385ZA) Q'ty: 2 Mounting Bolt (YEJV014C002N) Q'ty: 1 Rubber Bushing (YFS014C095ZA) Q'ty: 1 Mounting Collar (FX0214C384ZB) Q'ty: 1 Trim Plate (YFC054C081ZA) Q'ty: 1 Power Connector (YGAJ021009) Q'ty: 1 Removable Face Plate Case (YFC054C061ZB) Q'ty: 1 number in parentheses underneath each accessory part e is the part number for maintenance and service. ssories and their part numbers are subject to modifica- without prior notice due to improvements. nting Collar and Trim Plate are mounted on the main unit ipment. al upply :DC 12 V (11 – 16 V), test voltage 14.4 V, negative ground consumption :Less than 2.2 A (CD mode; 0.5 W x 4 channels) m power output :50 W x 4 channels (at 1 kHz), vol- ume control maximum utput :18 W x 4 channels (1 kHz, 1 %, 4 Ω) ustment range :Bass: ±12 dB at 100 Hz, Treble: ±12 dB at 10 kHz impedance :4 – 8 Ω p output voltage :2.5 V (CD mode, 1 kHz, 0 dB) p output impedance :200 Ω ons (W x H x D) :178 x 50 x 155 mm :1.3 kg UX input pedance :10 kΩ e external input :2.0 V or :3.5 mm ø stereo mini-pin Player g frequency :8 times oversampling erter :1 bit DAC System type :Astigma 3-beam urce :Semiconductor laser ngth :790 nm cy response :20 Hz – 20 kHz (±1 dB) o noise ratio :96 dB rmonic distortion :0.01 % (1 kHz) d flutter :Below measurable limits separation :75 dB FM Stereo Radio Frequency range :87.50 MHz – 108.00 MHz Usable sensitivity :6 dB/µV (S/N 30 dB) Frequency response :30 Hz – 15 kHz (±3 dB) Alternate channel selectivity :75 dB Stereo separation :35 dB (1 kHz) Image rejection ratio :75 dB IF rejection ratio :100 dB Signal to noise ratio :62 dB AM Radio Frequency range :531 kHz – 1 602 kHz Usable sensitivity :28 dB/µV (S/N 20 dB) Notes: ¡ Specifications and design are subject to modification without notice due to improvements. ¡ Some figures and illustrations in this manual may be different from your product. Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net MP3 CD Player/Receiver Model: CQ-C1405W Operating Instructions V O L SRC/PWR 1 2 3 4 5 6 CQ-C1405W T U N E / T R A C K F O L D E R SCROLL RANDOM SCAN REPEAT AUX P U S H S E L SQ ¡Please read these instructions carefully before using this product and keep this manual for future reference. English TEXT Safety Information Warning Observe the following warnings when using this unit. ❑The driver should neither watch the display nor operate the system while driving. Watching the display or operating the system will distract the driv- er from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before watching the display or operating the system. ❑Use the proper power supply. This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other bat- tery systems, especially a 24 V DC battery system. ❑Protect the Deck Mechanism. Do not insert any foreign objects into the slot of this unit. ❑Do not disassemble or modify the unit. Do not disassemble, modify the unit or attempt to repair the prod- uct yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Servicenter. ❑Do not use the unit when it is out of order. If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer. ❑Refer fuse replacement to qualified service personnel. When the fuse blows out, eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualified service engi- neer. Incorrect replacement of the fuse may lead to smoke, fire, and damage to the product. Observe the following warnings when installing. ❑Disconnect the lead from the negative (–) battery termi- nal before installation. Wiring and installation with the negative (–) battery terminal con- nected may cause electrical shock and injury due to a short circuit. Some cars equipped with the electrical safety system have specific procedures of battery terminal disconnection. FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH. ❑Never use safety-related components for installation, grounding, and other such functions. Do not use safety-related vehicle components (fuel tank, brake, suspension, steering wheel, pedals, airbag, etc.) for wiring or fix- ing the product or its accessories. ❑Installing the product on the air bag cover or in a location where it interferes with airbag operation is prohibited. ❑Check for piping, gasoline tank, electric wiring, and other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if pos- sible. ❑Never install the product in a location where it interferes with your field of vision. ❑Never have the power cord branched to supply other equipment with power. ❑After installation and wiring, you should check the nor- mal operation of other electrical equipment. The continuation of their using in abnormal conditions may cause fire, electrical shock or a traffic accident. ❑In the case of installation to an airbag equipped car, con- firm warnings and cautions of the vehicle manufacturer before installation. ❑Make sure the leads do not interfere with driving or get- ting in and out of the vehicle. ❑Insulate all exposed wires to prevent short circuiting. This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death. ■Read the operating instructions for the unit and all other compo- nents of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any prob- lems resulting from failure to observe the instructions given in this manual. ■This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. The meanings of the pictographs are explained below. It is important that you fully understand the mean- ings of the pictographs in order to use this manual and the system properly. Warning This pictograph intends to alert you to the presence of important operating instructions and installation instruc- tions. Failure to heed the instructions may result in injury or material damage. Caution Caution Observe the following cautions when using this unit. ❑Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. ❑This unit is designed for use exclusively in automo- biles. ❑Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery. ❑Do not expose the unit to direct sunlight or excessive heat. Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit. ❑Do not use the product where it is exposed to water, moisture, or dust. Exposure of the unit to water, moisture, or dust may lead to smoke, fire, or other damage to the unit. Make especially sure that the unit does not get wet in car washes or on rainy days. ❑Set the volume level to low enough before the AUX con- nection is completed. Failure to observe this, the loud noise may come out and dam- age your speakers and your hearing. Direct connection of the speaker/headphone output of an external device without any attenuator may distort sound or damage the connected external device. Observe the following cautions when installing. ❑Refer wiring and installation to qualified service per- sonnel. Installation of this unit requires special skills and experience. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. ❑Follow the instructions to install and wire the product. Not following the instructions to properly install and wire the product could cause an accident or fire. ❑Take care not to damage the leads. When wiring, take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not run them near heat sources or place heavy objects on them. If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection. ❑Use the designated parts and tools for installation. Use the supplied or designated parts and appropriate tools to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit. Faulty installation may lead to an accident, a malfunction or fire. ❑Do not block the air vent or the cooling plate of the unit. Blocking these parts will cause the interior of the unit to over- heat and will result in fire or other damage. ❑Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. ❑Installation Angle The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details. ❑Wear gloves for safety. Make sure that wiring is com- pleted before installation. ❑To prevent damage to the unit, do not connect the power connector until the whole wiring is completed. ❑Do not connect more than one speaker to one set of speaker leads. (except for connecting to a tweeter) Caution THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. eparation The 24-hour system is used for the clock. 1 Press [DISP] (CLOCK). (clock display) 2 Hold down [DISP] (CLOCK) for more than 2 seconds. Hours blinks 3 Adjust the hour. Hours set [[]: sets the hour ahead. []]: sets the hour back. 4 Press [DISP] (CLOCK). Minutes blinks 5 Adjust the minute. Minutes set [[]: sets the minute ahead. []]: sets the minute back. 6 Press [DISP] (CLOCK). Complete Notes: ¡ “ADJUST” is displayed before adjusting the clock. ¡ Hold down []] or [[] to change numbers rapidly. Clock Display at Power Off Press [DISP] to change the display. Display off Clock display 1 Set your car's ignition switch to the ACC or ON position. 2 Press [SRC] (PWR: Power). ACC ON efore Reading These Instructions c welcomes you to our constantly growing family of electronic products owners. vor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, mbled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours ent, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family. Maintenance This unit is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exteri- or cleaning. Never use benzine, thinner, or other solvents. Cleaning the Unit Fuse Anti-Theft System This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable. Removing 1 Turn off the power. 2 Press [ ]. The face plate will open. 3 Pull it out toward you. 4 Put the face plate in the case. Mounting 1 Slide the left side of the face plate in place. 2 Press the right end of face plate until a “click” is heard. Caution ¡ This face plate is not waterproof. Do not expose it to water or excessive moisture. ¡ Do not remove the face plate while driving your car. ¡ Do not place the face plate on the dashboard or nearby areas where the temperature rises high. ¡ Do not touch the contacts on the face plate and the main unit, since this may result in poor electrical contact. ¡ If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth. Face Plate Removing/Mounting (Anti-Theft System) If the replaced fuse fails, contact your nearest authorized Panasonic Service Center. Warning ¡ Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest authorized Panasonic Service Center. [ ] Notes on Discs Notes on CD/CD Media (CD-ROM, CD-R, CD-RW) Notes on CD-Rs/RWs ¡ You may have trouble playing back some CD-R/RW discs recorded using CD recorders (CD-R/RW drives), either due to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface. ¡ CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them inside a car for extended periods may damage them and make playback impossible. ¡ Some CD-R/RWs cannot be played back successfully due to incompatibility among writing software, a CD recorder (CD-R/RW drive) and the discs. ¡ This player cannot play the CD-R/RW discs if the session is not closed. ¡ This player cannot play the CD-R/RW discs which contain other than CD-DA or MP3 data . ¡ Be sure to observe the instructions of the CD-R/RW disc for handling it. Recording MP3 files on a CD-media ¡ You are recommended to minimize the chances of mak- ing a disc that contains both CD-DA files and MP3 files. ¡ If CD-DA files are on the same disc as MP3 files, the songs may not play in the intended order, or some songs may not play at all. ¡ Do not record files other than MP3 files and unnecessary folder on a disc. ¡ The name of MP3 file should be added by rules as shown in the following descriptions and also comply with the rules of each file system. ¡ You may encounter trouble in playing MP3 files or display- ing the information of MP3 files recorded with certain writ- ing software or CD recorders. ¡ The file extension “.mp3“ should be assigned to each file depending on the file format. ¡ This unit does not have the play list function. ¡ Although Multi-session recording is supported, the use of Disc-at-Once is recommended. Supported file systems ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet, Romeo Note: Apple HFS, UDF 1.50, MIX mode CD, CD Extra is not supported. Compression formats (Recommendation: “Points to remember when making MP3 files” on the right.) ¡ MPEG 1 audio layer 3 Bit rate: 32 k – 320 kbps VBR: Yes Sampling frequency: 32, 44.1, 48 kHz ¡ MPEG 2 audio layer 3 Bit rate: 8 k – 160 kbps VBR: Yes Sampling frequency: 16, 22.05, 24 kHz How to hold the disc ¡ Do not touch the underside of the disc. ¡ Do not scratch on the disc. ¡ Do not bend the disc. ¡ When not in use, keep the disc in a case. Do not leave discs in the following places: ¡ In direct sunlight ¡ Near car heaters ¡ Dirty, dusty and damp areas ¡ On seats and dashboards Disc cleaning Use a dry, soft cloth to wipe from the center outward. Do not write on the disc label with a ballpoint pen or other hard-point pens. If you use commercial CDs, they must have either of these labels shown at right. Some copy-protected music CDs are not playable. TEXT Labels created by a printer, Protective films or sheets Irregularly shaped discs Printed side Disc with adhered stickers or tape Discs with cracks, scratches or parts missing Notes on MP3 Note: MP3 encoding and writing software is not supplied with this unit. Points to remember when making MP3 files MP3 ¡ High bit rate and high sampling frequency are recom- mended for high quality sounds. ¡ Selecting VBR (Variable Bit Rate) is not recommended because playing time is not displayed properly and sound may be skipped. ¡ The playback sound quality differs depending on the encoding circumstances. For details, refer to the user manual of your own encoding software and writing soft- ware. ¡ It is recommended to set the bit rate to “128 kbps or more” and “fixed”. Display Information Displayed items ¡ CD-TEXT ¡ MP3 (ID3 tag) Disc title Album name Track title Title name/Artist name ¡ MP3 Folder name File name Displayable characters ¡ Displayable length of file name/folder name: within 32 characters. (Unicoded file and folder names are reduced by half in the number of displayable characters.) ¡ Name files and folders in accordance with the standard of each file system. Refer to the instructions of writing soft- ware for details. ¡ ASCII character set and special characters in each lan- guage can be displayed. Notes: ¡ With some software in which MP3 format files have been encoded, the character information may not be displayed properly. ¡ Undisplayable characters and symbols will be converted into an asterisk ( ). Folder selection order/file playback order Maximum number of files/folders ¡ Maximum number of files: 999 ¡ Maximum number of files in one folder: 255 ¡ Maximum depth of trees: 8 ¡ Maximum number of folders: 255 (Root folder is includ- ed.) Notes: ¡ This unit counts the number of folders irrespective of the presence or absence of an MP3 file. ¡ If the selected folder does not contain any MP3 files, the nearest MP3 files in the order of playback will be played. ¡ Playback order may be different from other MP3 players even if the same disc is used. ¡ “ROOT” appears when displaying the root folder name. Caution Never assign the “.mp3”, file name extension to a file that is not in the MP3 format. This may not only produce noise from the speaker dam- age, but also damage your hearing. Copyright It is prohibited by copyright laws to copy, distribute and deliver copyrighted materials such as music without the approval of copyright holder except enjoying yourself per- sonally. No warranty Above description complies with our investigations as of September 2006. It has no warranty for reproducibility and displayability of MP3. Notes on MP3 MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. IEng(90%) 11/06/2006 03:05 PM ›¶›– 1

Functions Only on Main Unit The following functions are not available on remote control unit. ¡SQ selection ¡Scroll ¡Disc eject Battery Replacement q Remove the battery holder with the remote control unit placed on a flat surface. q Stick your thumbnail into the groove, and push the holder in the direction of the arrow at the same time. w Pull it out in the direction of the arrow using a tough pointed object. w Put a battery in the case with (+) side facing up. e Put the case back. Warning ¡Keep batteries away from children to avoid the risk of accidents. If an infant ingests a battery, please seek immediate medical attention. Caution ¡ Remove and dispose of an old battery immediately. ¡ Do not disassemble, heat or short a battery. Do not throw a battery into a fire or water. ¡ Follow local regulations when disposing of a battery. ¡Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire. Notes: Battery Information: Battery Type: Panasonic lithium battery (CR2025) (Included in the remote control) Battery Life: Approximately 6 months under normal use (at room temperature) Tough pointed object Back side struction manual explains operations for use with the buttons on the main unit. (Different operations excluded) The optional remote control unit is available from your local dealer. (CA-RC80N) MUTE MUTE PWR PWR MODE MODE VOL VOL CAR AUDIO MUTE PWR MODE BAND BAND BAND VOL TUNE TRACK POWER PWR] (Power) ggles power on/off. MODE] elects a mode (source). BAND] elects a band in the radio urce, toggls pause/play in the ayer souce, and executes APM the radio source. (Hold down for more than 2 seconds.) [MUTE] toggles mute on/off. [VOL{][VOL}] adjust the volume. [TUNE]][TUNE[] down/up the frequency. (Hold down it for more than 0.5 seconds for seek tuning.) [TRACK6][TRACK7] skip to the previous/next track/file in the player mode. Hold down it for fast reverse/fast for- ward. General General Operations Power On/Off Set your car’s ignition switch to the ACC or ON position. Power on: Press [SRC] (PWR). Power off: Hold down [SRC] (PWR) for more than 1 second. Source Selection Press [SRC] to change the source. Volume Adjustment (Setting Range: 0 to 40, Default: 18) Turn [VOL]. Mute ON: Press [MUTE]. ( lights.) OFF: Press [MUTE] again. SQ (Sound Quality) SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type. Press [SQ] to select the sound type as follows: Note: Settings of SQ, bass and treble are influenced one another. If such an influence causes distortion to the audio signal, readjust bass/treble or volume. (FLAT) flat frequency response: does not emphasize any part. (Default) (ROCK) speedy and heavy sound: exaggerates bass and treble. (POP) wide-ranged and deep sound: slightly emphasizes bass and treble. (VOCAL) clear sound: emphasizes middle tone and slightly empha- sizes treble. Radio Disc Player AUX IN V O L SRC/PWR 1 2 3 4 5 6 CQ-C1405W T U N E / T R A C K F O L D E R SCROLL RANDOM SCAN REPEAT AUX P U S H S E L SQ SRC/PWR [MUTE] toggles mute on/off. Remote Control Sensor for an optional remote control unit (CA-RC80N). [VOL] (Volume) adjusts the volume. [SQ] (Sound Quality) selects a sound type (SQ). * [SRC] (Source) selects a source. [PWR] (Power) toggles power on/off. *[AUX] (AUX IN) to a line output of an external sound/audio device. (ex. Silicon audio player, HDD audio player, etc) (for details Installation Instructions) Caution Set the volume level to low enough before the AUX connection is com- pleted. *AUX IN mode: lights when mute is on. Radio (FM/AM) Operation Flow 1 Press [SRC] to select the radio source. 2 Press [BAND] to select a band. 3 Select a station. Frequency adjustment [TUNE]]: Lower [TUNE[]: Higher Note: Hold down either of them for more than 0.5 sec- onds and release it for seek tuning. Preset station selection Press the corresponding preset button from [1] – [6] to tune in a preset station. V O L SRC/PWR 1 2 3 4 5 6 CQ-C1405W T U N E / T R A C K F O L D E R SCROLL RANDOM SCAN REPEAT AUX P U S H S E L SQ APM BAND DISP 1 2 3 4 5 6 SRC/PWR [TUNE ]] [TUNE [] Down/up the frequency. (Hold it down for more than 0.5 seconds and release it for seek tuning.) [BAND] selects a band in the radio source. (APM) (Auto Preset Memory) executes APM in the radio source. (Hold it down for more than 2 seconds.) [DISP] (Display) switches the informa- tion on the display. [SRC] (Source) selects a source. Preset buttons [1] – [6] selects a preset station in the radio source, and presets the current station. (Hold it down for more than 2 seconds.) (Stereo) indicator Station Preset Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively. Preset stations can be simply called up by pressing [1] – [6]. Auto Preset Memory (APM) With this operation, stations with good receiving conditions can be automatically stored in the preset memory. 1 Select a band. 2 Hold down [BAND] (APM) for more than 2 seconds. The preset stations under best receiving conditions are received for 5 seconds each after presetting the stations (SCAN). To stop scanning, press one of the buttons from [1] – [6]. Note: New stations overwrite existing saved stations. Manual station preset 1 Tune into a station. 2 Hold down one of the preset buttons from [1] – [6] for more than 2 seconds. (blinks once) Note: New stations overwrite existing saved stations. lights while receiving an FM stereo signal Frequency Preset Number Band Display change Press [DISP] to change the display. Radio mode display (Default) Radio Source Display Clock display sc Player 1 Press [SRC] to select the Disc Player source. 2 Select a desired portion. Track/file selection Press [6] / [7]. Note: To perform fast forward/reverse, hold down either of them. Disc Player (CD-DA disc): Previous/next track Disc Player (MP3 disc): Previous/next file Folder selection (MP3) Disc Player (MP3 disc): Press [{] / [}]. Skip to the previous/next folder. Pause Press [BAND] (y / 5). Press again to cancel. Caution not insert a disc when the indicator lights. er to the section of “Notes on Discs” and “Notes MP3. s unit does not support 8 cm discs. ¡ If you insert an 8 cm disc and cannot eject it, turn the ignition key to the ACC OFF position once and turn the key to the ACC ON position again, then press [u] (Eject). ¡Do not insert foreign objects into the disc slot. V O L SRC/PWR 1 2 3 4 5 6 CQ-C1405W T U N E / T R A C K F O L D E R SCROLL RANDOM SCAN REPEAT AUX P U S H S E L SQ APM BAND 3 4 5 6 SRC/PWR DISP ot sc in with the printed side facing up. ower will be turned on automatically when is loaded. which has both CD-DA data and MP3 n it may not be reproduced normally. Pause/Play) ause/play in the urce. [DISP] (Display) switches the information on the display. [6] [7] skip to the previous/next track/file in the player mode. Hold down either of them for fast reverse/fast forward. [SRC] (Source) selects a source. ROLL) e information on display. [{] [}] skip to the previous/next folder in MP3 mode. [u] (Eject) ejects the disc. indicator [4] (RANDOM)/[5] (SCAN)/[6] (REPEAT) toggles on/off each play mode. Printed side up Random, Repeat, Scan Random play All the available tracks/files are played in a random sequence. Press [4] (RANDOM). Press again to cancel. Folder random play (MP3) All the available files in current folder are played in a random sequence. Hold down [4] (RANDOM) for more than 2 seconds. Hold down again to cancel. Repeat play The current track/file is repeated. Press [6] (REPEAT). Press again to cancel. Folder repeat play (MP3) The current folder is repeated. Hold down [6] (REPEAT) for more than 2 seconds. Hold down again to cancel. Scan play The first 10 seconds of each track/file is played in sequence. Press [5] (SCAN). Press again to cancel. Folder scan play (MP3) From the next folder, the first 10 seconds of the first file in each folder is played in sequence. Hold down [5] (SCAN) for more than 2 sec- onds. Hold down again to cancel. Display change Press [DISP] to change. Player Source Display Disc title Normal Track title Clock Disc Player (CD-DA disc) Disc Player (MP3 disc): Play time Normal Folder name/ Album* File name/ Title, artist* Clock Notes: ¡ For scrolling text, press [3] (SCROLL) . ¡ “NO TEXT” is displayed when there is no information on the disc. *ID3 Tag On/Off Hold down [3] for more than 2 seconds. album title and song title /artist name are displayed. (Default) folder name/file name are displayed. CD-DA mode display Track number Random indicator Play time Repeat indicator MP3 mode display Folder number lights when folder random/repeat/scan is on. File number Repeat indicator Random indicator Audio Settings Audio Menu Note: If the fader is set to front, the pre-amp. output (rear) is decreased. 1 Press [VOL] (PUSH SEL) to display the audio menu display. Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjustment), the display returns to the regular mode. 2 Press [VOL] (PUSH SEL) to select a mode to be adjusted. 3 Turn [VOL] clockwise or counterclock- wise to adjust. (Setting Range: 0 to 40, Default: 18) q : Up w : Down (Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB) q : Increased w : Decreased (Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB) q : Increased w : Decreased (Setting Range: 15 levels each, Default CNT (cen- ter)) q : Right enhanced w : Left enhanced (Setting Range: 15 levels each, Default CNT (cen- ter)) q : Front enhanced w : Rear enhanced Volume Bass Treble Balance Fader V O L SRC/PWR 1 2 3 4 5 6 CQ-C1405W T U N E / T R A C K F O L D E R SCROLL RANDOM SCAN REPEAT AUX P U S H S E L SQ DISP [DISP] (Display) exits from the audio menu. [VOL] selects a value in the audio menu. (PUSH SEL) (Push to Select) selects items in the audio menu. Troubleshooting Trouble Check point No power ●Start the engine. (Or turn the ignition switch to the ACC position.) ●Verify the wiring. (battery lead, power lead, ground lead, etc.) ●Fuse blown (Contact the nearest Panasonic Service Center.) ●Ask a professional for fuse replacement. ●Be sure to use the same rated fuse. No sound ●Disable the mute function. ●Verify the wiring. ●Wait until the dew disappears before turning on the unit. Noise ●Make sure that grounding is established properly. Common Frequent noise ●Tune in to another station of high-inten- sity waves. ●Make sure that the antenna mounted point is grounded properly. Radio Preset data deleted ●The preset memory is cleared to return to the original factory setting when the power connector or battery is discon- nected. No sound, or disc is automatically ejected ●Load the disc correctly. ●Clean the disc. Disc Player Sound skip, poor sound quality ●Clean the disc. Sound skip due to vibration ●The maximum permissible tilt angle is 30°. ●Secure the unit. Disc unejectable ●Press [u]. If the disc is still not ejected, contact the nearest Panasonic Service Center. No sound from left, right, front, or rear speaker ●Adjust the balance and fader. ●Verify the wiring. Trouble Check point Left and right sounds are reversed ●Connect the speaker lead correctly. Error Display Messages No operation by some cause. ●If normal operation is not restored, con- sult your dealer or the nearest Service Center to ask for repairs. Cannot read the file ●Check the file. If You Suspect Something Wrong Check and take steps as described below. If the described suggestions do not solve the problem, it is recom- mended to take the unit to your nearest authorized Panasonic Service center. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking. Warning ¡ Do not use the unit in an irregular condition, for example, with- out sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealer. ¡ Never try to repair the unit by yourself because it is dangerous to do so. Never take measures especially for those other than indicated by italic letters in “Check point” described below because those are too dangerous for users to handle themselves. (The disc is ejected automatically.) The disc is dirty, or is upside down. The disc has scratches. ●Check the disc. IEng(90%) 11/06/2006 03:05 PM ›¶›– 2

V O L SRC/PWR 1 2 3 4 5 6 CQ-C1405W T U N E / T R A C K F O L D E R SCROLL RANDOM SCAN REPEAT AUX P U S H S E L SQ 5 6 T U N E / T R A C K F O L D E R SCAN REPEAT AUX

àÒÔÓθÁÓ‚‡ÌË „pÓÏÍÓ„Ó‚ÓpËÚÂÎÂÈ Ò ÌÂÔÓ‰ıÓ‰fl˘ËÏË ÚÂıÌ˘ÂÒÍËÏË ı‡paÍÚÂpËÒÚË͇ÏË ÏÓÊÂÚ ÔpË‚ÂÒÚË Í Ó·„ÓpaÌ˲, ‚ÓÁÌËÍÌÓ‚ÂÌ˲ ‰˚χ ËÎË ÔÓ‚pÂʉÂÌ˲ „pÓÏÍÓ„Ó‚ÓpËÚÂÎÂÈ. burning, smoking or damage of the speakers.