Morso 3112 Installation And Operation Instructions Manual

Page no. 1.1 Unpaking the stove 4 1.2 Checking loose parts in the stove 5 1.3 The chimney / flue system 6 1.4 Flue connection 6 1.5 Connection to the existing chimney 8 1.6 Positioning the stove 10 2.0 Operation 11 2.1 Before you start firing 11 2.2 Lighting & loading intervals 12 3.0 Maintenance 15 3.1 Exterior maintenance 15 3.2 Internal maintenance 15 3.3 Cleaning the stove & the flue 17 3.4 Leaving the stove for extended periods 18 3.5 Parts diagram 19 3.6 Parts list 20 Contents Congratulations on the purchase of your new Morsø stove! Morsø, which ...

proof paint) are available for use with your Morsø stove. They help with day-to-day running and maintenance. Contact your Morsø dealer for more information. The Morsø 3112 & 3142 meets the U.S. Environmental Protection Agency’s emission limits for wood heaters sold on or after July 1, 1990. The Morsø 3112 & 3142 have been tested by OMNI-Test Laboratories, Inc. The test standards are ANSI/UL-1482 for the United States and ULC S627 for Canada. The stove is listed for burning ...

utes, the door should be closed. A suitable ember bed will be formed after a further 15-20 minutes. 5. When ready to reload, use a poker to spread the ember across the firebox floor, bringing plenty towards the front of the stove. 6. Lay three pieces of wood (see dimensions above) onto the embers. Leave half an inch (1 cm) or more between each piece. Place the ends of your logs towards the open- ing, but not too close to the front. 7. Close the door. Leave the primary air supply fully open. 8. After a few minutes, and adjust the pri ...

Primary Air is controlled using the lever situated under the ash lip of the stove. Moving the con- trol lever into a downward position will open the air inlet and will allow a supply of preheated air to enter the firebox via the ‘airwash’ system situated inside the stove and the above glass. Secondary Air is delivered to the firebox using the specially designed baffle at the back of the fire- box. The secondary air is injected into the flue gases both above and in front of the fire resulting in a cleaner, more effi ...

E-Mail: [email protected] · Website: www.morsoe.com Morsø Jernstøberi A/S - 12.11.2015 - 72311600 IMPORTANT! How to heat safely for the environ- ment and yourself! • Use only dry wood Use only dry (max. 20% moisture content) and untreated wood. The fuel must be split and 8 - 12 cm thick. • Light Light with dry kindling (use 1 - 2 kg). Leave the door ajar and stay close to the stove during the lighting phase. • Good layer of embers Be certain to have a good layer of em- bers before refilling. The wood should light within 2 minutes. ...

Guarantee Product Registration MORSØ 10 YEAR GUARANTEE CERTIFICATE Behind every Morsø stove is more than 160 years of dedicated stove design and manufacturing experi- ence. Quality control has always been at the heart of the production process and detailed measures have been put into place at all key stages of the build. Accordingly, provided that the stove has been supplied by an authorised Morsø dealer, Morsø will offer a 10-Year Manufacturers Guarantee against manufacturing defect to any of the main exterior body parts of its stoves. Re ...