Qwizdom Interact Quick Start Manual

The quick start guide is designed to help you set up your Qwizdom set. A more extensive guide is available at www.qwizdom.com under Support. Table of Contents Check the set contents Installing Qwizdom Interact Installing the USB Drivers Setting up your remotes Assigning Fixed Numbers Common Screen Displays If you need assistance: Phone Email Web 253.770.1285 [email protected] www.qwizdom.com Live Support Hours: 6am-4:30pm PST

You should have the following items: Q5RF Instructor Remote Q4RF Remote Q5RF Remote USB Host Charger Unit for Q5RF Instructor Remote, Screws, and Screwdriver Multiple Remote Charger for Q5RF Set USB Cable OR Q2RF Remote OR OR Batteries for Q2RF & Q4RF Set

Thank you for ordering from Qwizdom! We strive to offer first quality products, and want you to be completely satisfied with your purchase. Qwizdom products are guaranteed to be free from defects and workmanship for one (1) year from the date of purchase. This warranty is not valid if product has been damaged from misuse or abuse by the end-user. Qwizdom representatives and dealers who have specific territories have the option of offering a limited warranty of three (3) years. Please check with your local representative for this information. Please inspect your Qwizdom order carefully to make sure it is complete. If you believe you are miss- ing any portion of the order, please contact the Qwizdom representative who you placed the order with, or call our customer service department at (253) 845-7738 within 30 days from receipt of the order. Any damaged or defective products will be replaced with the same product. Please contact our tech support staff at (253) 770-1285 if you need assistance in setting up your system. If for any reason you are unsatisfied with your purchase and product is not defective, simply obtain an RMA number from your representative and return it within 30 days of the invoice date. Please note that there is a 10% restocking fee for all returned products that must be paid prior to receiving an RMA number. A credit memo will be issued once the product is returned in good, resalable condition. In order to return products, you must: Please contact the Qwizdom representative who you placed the order with, or call our • service department at (253) 845-7738 to obtain an RMA number. Return authorizations are valid 30 days from the date of issue. Please repack item(s) with the original packing boxes and the RMA number clearly marked • on the outer carton. Products returned with no RMA number will be refused. For your benefit, please return via UPS, Federal Express, or insured mail so you can track • the package, and insure the product. If any package is lost in transit on its return, you will still be responsible for the complete costs of the product. Again, thank you for your business. We trust you will find Qwizdom to be a great help in your classroom! Software Site License Upon the purchase of 25 or more sets of Qwizdom RF remotes, Qwizdom Interact (Windows or Mac), Qwizdom Actionpoint, and Qwizdom Mactionpoint software is provided as a site(school) license. Instructors may also install Qwizdom Interact (Windows or Mac), Qwizdom Actionpoint, or Qwizdom Mactionpoint on their home computers to work on school activities. Additional software licenses are available for purchase; contact your sales representative for pricing. The curriculum (content) CDs carry a general licensing agreement, consisting of one computer user, but can be installed on two computers. A site (school) license for each title may be obtained at an ad- ditional cost. Please contact your representative for additional pricing. QWIZDOM, INC. 12617 Meridian East Puyallup, WA 98373-3427 P: 253-845-7738 ~ F: 253-845-1909 Tech Support ~ (253) 770-1285 Cleveland Office 15711 Madison Ave. Lakewood, Ohio 44107 P: 216-228-3999 or 877-QWIZDOM Interact Stand-Alone 1.0 US EXAM-PLE-ONLY-4CVY 01 02 03 04 05 06 Interact Stand-Alone 1.0 US EXAM-PLE-ONLY-4CVY 01 02 03 04 05 06 Qwizdom Set also includes: Remote Index Card Qwizdom Interact Curriculum* License Agreement & Warranty Documentation * Depending on your order Software

............................................................ 2 INSTALLING QWIZDOM INTERACT Place the Qwizdom Interact disc into your CD-ROM drive • Click on • “Install Interact” Follow the InstallShield wizard • You may need to restart your computer when finished • Go to the CD-ROM drive • Right-click on the Qwizdom • Interact Icon Double-click the Setup.exe file • Note: The Qwizdom Interact icon will appear on your desktop after installation.

Windows 2000/XP 1 From the Start menu, go to the Control Panel or go to Settings and then • Control Panel Double-click on the System icon • 2 Click on the Hardware tab • Click on the • “Device Manager” button Select • “View Devices by Type” under the View menu With the Qwizdom Interact disc in the CD-Rom drive, • connect the RF Host to your USB Port using the supplied USB Cable A window will appear indicating that the drivers have been sucessfully installed • If this does not happen follow the steps below to manually install the drivers

• following: Ports, Universal Serial Bus Controllers, Unknown or Other Devices Select • “Update Driver” 4 The • “Found New Hardware” wizard appears Select • “Install from a list or specific location” Click • “Next”

for the RF host. Follow prompts to install the second USB driver. 7 6 The RF host is now installed and the green light on the front should be lit. Select • “Search for the best driver in these locations” Check • “Include this location in search” Click on • “Browse” and the “Browse for Folder” window appears Go to My Computer and select the USB drivers folder located on • the Qwizdom Interact disc Click • “OK” and then click “Next” A prompt will appear that says the drivers have not passed the • Microsoft Windows Update testing-- click on “Continue Anyway” Click on • “Finish” 5

• then Device Manager Select • “View Devices by Type” under the View menu 2 Right-click on the RF Host found under one of the • following: Ports, Universal Serial Bus Controllers, Unknown or Other Devices Select • “Update Driver”

Click • “Next” Click on • “Browse” and the “Browse for Folder” window appears Click on My Computer, then select the USB drivers folder • located on the Qwizdom Interact disc Click • “OK” and then “Next” 5 When it’s done installing, click on • “Close” Repeat the above steps once more and then restart your computer • 4 6 The RF host is now installed and the green light on the front should be lit.

Double-click on the Qwizdom Interact icon on your Desktop. Once Qwizdom Interact is open, click on the “Remotes” button in the toolbar. 1 2 The Remote Options window will appear: Click on • “Change” to select your remote type Adjust the lowest/highest number • setting for your remote set

4 This procedure only needs to be done once, unless you change computers or hosts. Click on • “Assign Fixed Numbers” The • “Assign Remotes” window appears The Session ID is the host’s unique ID. Entering the Session ID into the remotes lets them know which host to communicate with. In the Remotes Options title bar 1. In the Assigned Fixed Numbers title bar 2. On the bottom of the RF Host 3. What is a Session ID? Where is the Session ID located? * * * *

Hold down the MENU button for a • few seconds to turn on the remote Enter Sess. ID 2 100804 3 Enter the Session ID. Use the key pad to enter • the Session ID and press the SEND button The remote may ask for a Session ID. 4 Find Net The remote will try to connect to the host. Q4RF Remotes

number will appear in the upper right of the remote’s LCD screen and display “Qwizdom.” After all remotes have connected to the host, click on “Save” at the bottom to exit the “Assign Remotes” window. 5 6 Exit remote options. To exit the Remote options • screen, press “OK”

1 Switch on your remotes. The power switch for the Q5RF is located on the top of the remote. Slide the power switch to the right to turn on. 2 The remote may ask for a Session ID. 3 Enter the Session ID. 100804 4 The remote will try to connect to the host. Q5RF Remotes Use the keypad to enter • the Session ID and the press SEND button

remote number will appear on the remote’s LCD screen and display “Remote #1.” When the instructor remote connects to the RF host, the T will light up in blue on the screen. After all remotes have connected to the host click on “Save” at the bottom to exit the “Assign Remotes” window. or 6 Exit remote options. Press • “OK” to exit the Remotes Option Window Participant Instructor

Qwizdom: • Displays when slides are non-question types such as lessons or information. Ready: • Displays on the instructor remote when remote is ready to use. Last Key: • Will appear on the instructor’s remote showing the last key that was pressed. Activity ID: • Requesting an Answer Key activity number. Prompt only appears when multiple test versions are being presented. Activity numbers should be noted on the test sheets before presenting; numbers cannot be viewed while in presentation mode. Loading: • An answer key is loading; may take a few moments. Push Key: • Remote is idle. Press any key, (except “Menu”) to reactivate. Inactive: • Remote senses the host is not in use or does not recognize the session. If remote remains inactive after starting a presentation, reenter “Session ID” by scrolling right to “Sess.ID” and pressing “Send.” When prompted, reenter the session ID and press “Send.” No Net: • Remote cannot find the network. Reenter the “Session ID.” If “No Net” continues, enter “User ID” and “Session ID.” Denied: • User denied due to incorrect session user ID, or a duplicate ID.