Panasonic DMR-EX97C Operating Instructions Manual

Please read these instructions carefully before using this product, and save this manual for future use. DVD Recorder Model No. DMR-EX97C DMR-EX97S Software (Firmware) Update To support the latest features, it’s very important you install the latest updates to maintain proper operation of your unit. For details, refer to “Software (Firmware) Update” (> 76) or http://panasonic.jp/support/global/cs/ (This site is in English only.) EG

lighted candles, on this unit. • This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone. • This unit is intended for use in moderate climates. Safety precautions WARNING Unit • To reduce the risk of fire, electric shock or product damage, - Do not expose this unit to rain, moisture, dripping or splashing. - Do not place objects filled with liquids, such as vases, on this unit. - Use only the recommended accessories. - Do not remove covers. - Do not repair this unit by yourself. Refer servicing to qualified service personnel. - Do not let metal objects fall inside this unit. - Do not place heavy items on this unit. AC mains lead • To reduce the risk of fire, electric shock or product damage, - Ensure that the power supply voltage corresponds to the voltage printed on this unit. - Insert the mains plug fully into the socket outlet. - Do not pull, bend, or place heavy items on the lead. - Do not handle the plug with wet hands. - Hold onto the mains plug body when disconnecting the plug. - Do not use a damaged mains plug or socket outlet. • The mains plug is the disconnecting device. Install this unit so that the mains plug can be unplugged from the socket outlet immediately. CAUTION • This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Placement • Place this unit on an even surface. • To reduce the risk of fire, electric shock or product damage, - Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. - Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. - Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.

accessories. (Product numbers are correct as of June 2015. These may be subject to change.) • Do not use AC mains lead with other equipment. Insert batteries Insert so the poles (i and j) match those in the remote control. Batteries • Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. • Mishandling of batteries can cause electrolyte leakage and may cause a fire. - Do not mix old and new batteries or different types at the same time. - Do not heat or expose to flame. - Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. - Do not take apart or short circuit. - Do not recharge alkaline or manganese batteries. - Do not use batteries if the covering has been peeled off. - Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. • When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. Supplied accessories Remote control (N2QAYB001047): 1 pc. Batteries for remote control: 2 pcs. AC mains lead: 1 pc. [EX97C] RF coaxial cable: 1 pc. About descriptions in these operating instructions • These operating instructions are applicable to models DMR-EX97C and DMR-EX97S. The illustrations in these Operating Instructions show images of DMR-EX97C unless otherwise indicated. • [EX97C] : indicates features applicable to DMR-EX97C only. • [EX97S] : indicates features applicable to DMR-EX97S only. • Pages to be referred to are indicated as “> ±±”. R6/LR6, AA (Alkaline or manganese batteries)

Safety precautions . . . . . . . . . . . . . . . . . . . . 2 Supplied accessories. . . . . . . . . . . . . . . . . . 3 Getting started HDD and media information . . . . . . . . . . . . 6 Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Control reference guide. . . . . . . . . . . . . . . 12 CI (Common Interface) module . . . . . . . . 14 Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 16 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 FUNCTION MENU screen . . . . . . . . . . . . 22 Watching broadcasts Watching broadcasts . . . . . . . . . . . . . . . . . 23 Recording Recording TV programmes. . . . . . . . . . . . 27 Timer recording. . . . . . . . . . . . . . . . . . . . . . 29 Playing back video Playing titles on the HDD . . . . . . . . . . . . . 34 Playing titles on the media . . . . . . . . . . . . 37 Operation during play. . . . . . . . . . . . . . . . . 38 Editing video Deleting/Editing titles . . . . . . . . . . . . . . . . . 42 Copying video Copying titles. . . . . . . . . . . . . . . . . . . . . . . . 46 Photo and Music Playing photos. . . . . . . . . . . . . . . . . . . . . . . 54 Editing photos . . . . . . . . . . . . . . . . . . . . . . . 56 Copying photos . . . . . . . . . . . . . . . . . . . . . . 57 Playing music . . . . . . . . . . . . . . . . . . . . . . . 58 Copying/Deleting music. . . . . . . . . . . . . . . 59 With Other Equipment Copying the HD Video (AVCHD) . . . . . . . 60 Registering the external HDD (USB HDD) . . . . . . . . . 61 Convenient functions VIERA Link functions . . . . . . . . . . . . . . . . . 63 Playback menu . . . . . . . . . . . . . . . . . . . . . . 64 Basic Settings . . . . . . . . . . . . . . . . . . . . . . . 66 Software (Firmware) Update . . . . . . . . . . 76 Other operations. . . . . . . . . . . . . . . . . . . . . 77 Troubleshooting Troubleshooting guide. . . . . . . . . . . . . . . . 80 Reference Specifications . . . . . . . . . . . . . . . . . . . . . . . 87 Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Editing video Copying video Photo and Music With Other Equipment Convenient functions Troubleshooting Reference SQT0989 5

Getting started For more details, refer also to the specifications. (> 87) (–: Impossible) Recordable/playable contents Media type Standard symbol Recordable contents Playable contents Built-in hard disk drive (HDD) [HDD] • Video • AVCHD/AVCHD 3D • JPEG • MPO (3D photo) • MP4 • MPEG2 • Xvid • MKV • AAC • MP3 External hard disk drive (USB HDD) (> 9) [USB_HDD] • Video§1 – • AVCHD/AVCHD 3D§2, 3 • MP4 • MPEG2 • Xvid • MKV • JPEG • AAC • MP3 • MPO (3D photo) DVD-Video§4 [DVD-V] – • Video DVD-RAM [RAM] • Video • JPEG • MPO (3D photo) – • AVCHD§2 DVD-R DVD-R DL [DVD-R] • Video • AVCHD§2 – • Xvid • MKV • JPEG • MPO (3D photo) • AAC • MP3 DVD-RW [DVD-RW] • Video – • AVCHD§2 +R/+R DL [+R] • Video – • Xvid • MKV • AVCHD§2 • JPEG • MPO (3D photo) • AAC • MP3 +RW [+RW] • Video – • AVCHD§2

• With certain recording states and folder structures, the play order may differ or playback may not be possible. • It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method, and how the files were created. Media type Standard symbol Recordable contents Playable contents Audio CD (CD-DA) [CD] – • Music CD (including CD-R/RW) – • Xvid • MKV • JPEG • MPO (3D photo) • AAC • MP3 USB memory [USB] – • AVCHD/AVCHD 3D§2, 3 • MP4 • MPEG2 • Xvid • MKV • AAC • MP3 • JPEG • MPO (3D photo) §1 It cannot be recorded directly. (Only compatible with copying from the built-in HDD) §2 Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be able to play back, add, or edit depending on the device. §3 It cannot be played back directly from the USB HDD or USB memory. Playback is possible by copying to the built-in HDD. (> 60) §4 Includes finalised DVD-R, DVD-R DL, DVD-RW, +R and +R DL. The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish to record or playback. Indemnity concerning recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content (data), and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-HDD related component).

∫Broadcast Recordings Numbers of titles that can be recorded: • Maximum numbers of titles are including recordings of HD CAMCORDER. ∫HD CAMCORDER Recordings MPEG-4 AVC/H.264 (based on AVCHD) Numbers of titles that can be recorded: • Maximum numbers of titles are including recordings of Broadcast. ∫Photo files Compatible pixels: Between 34k34 and 8192k8192 pixels Sub sampling: 4:2:2, 4:2:0 (Motion JPEG is not supported.) Maximum numbers of contents: ∫Video files/Audio files Numbers of contents that can be copied to internal HDD: USB device: • Each folder can store up to 1000 files. • We recommend that you limit the depth of folder trees to about five levels. • The video file and subtitle text files are inside the same folder, and the file names are the same except for the file extensions. • Some files may not be played back even if they have these extensions. Information about contents Media Maximum titles HDD 1000 DVD-RAM, DVD-R, DVD-RW 99 +R, +RW 49 Media Maximum titles HDD 1000 Media Folders Files HDD – 20000 DVD-RAM, DVD-R, +R, CD-R, CD-RW, USB device 500 10000 Contents Maximum numbers of folders and files Video 20000 Audio 20000 About extension of files MP4: “.mp4” “.mov” MPEG2: “.mpg” “.mpeg” “.m2ts” “.mts” “.ts” Xvid: “.avi” Subtitle text files: “.srt” “.sub” “.txt” MKV: “.mkv” Subtitle text files: “.srt” “.sub” “.txt” JPEG: “.jpg” MPO: “.mpo” AAC: “.m4a” MP3: “.mp3”

The unit automatically selects the best possible recording rate between XP mode and EP mode. §2 The SD quality programme cannot be converted to HD quality. §3 You cannot select during play whether it appears or disappears. Approximate recording times Refer to “Recording modes and approximate recording times”. (> 88) You can use an external HDD (USB HDD) in the following two ways (A single HDD cannot handle those two ways simultaneously), and a USB memory for data files. • For recorded titles Moving titles in the built-in HDD to a USB HDD to save the capacity of the built-in HDD. • The USB HDD must first be registered on this unit. (> 61) • The USB HDD over 3 TB is not usable. • For data files Playing back MP4, JPEG, MP3, etc. (data files) in a USB device with this unit. • The USB device must be formatted in FAT12, FAT16, FAT32 and NTFS file system. • The USB device over 2 TB is not usable. • This unit supports USB 2.0 High Speed. • Although this unit can use USB 3.0 devices as USB 2.0 devices, in certain cases USB 3.0 devices cannot be used due to differing connector shape, larger current ratings, etc. (Use of USB 2.0 devices is recommended.) • This unit does not recognise USB HDDs other than those in which the size of one sector is 512-bytes or 4096-bytes. (For details, consult the dealer of your USB HDD.) • This unit supports USB mass storage device class. • This unit does not guarantee connection with all USB devices. Recording mode Recording Mode DR HG/HX/HE/HL/HM XP/SP/LP/EP/FR§1 Feature Programmes can be recorded in a nearly perfect broadcasted state. Recording can be done with reduced recording volume in High definition (HD) quality§2. Recording can be done with reduced recording volume in Standard definition (SD) quality. Recordable media Multiple audio Record all multiple audio Record only one audio Subtitles / Teletext Can be recorded Can be recorded (only one subtitle or teletext)§3 Surround audio Surround audio as the broadcast Stereo audio Notes Notes for the USB device

• Region management information The unit can play back DVD-Video discs of the following regions codes, including “ALL”: • Disc recorded on another device • It may be necessary to finalise the disc, create Top Menu or close the session on the equipment used for recording to play on this unit. • [DVD-RW] Recorded in DVD Video Recording (DVD-VR) format - This unit can play back and copy to HDD. - This unit does not support editing or recording. - It is possible to record and edit with DVD-Video (DVD-V) format by formatting discs with this unit. • Recording may not be possible to discs which were used for recording on other equipment. • Play on other players • [DVD-R] [DVD-RW] [+R] Finalisation is needed. (> 78) • [+RW] If the disc failed to play on other equipment, we recommend you create a Top Menu (> 78). • [DVD-R] The disc created in AVCHD format can only be played back on AVCHD compatible equipment. • Regarding 8 cm Disc This unit cannot record or edit the 8 cm disc. Only playback or copy to the HDD is possible. • Discs that cannot be played - Blu-ray Disc - DVD-RAM in a cartridge - 2.6 and 5.2 GB DVD-RAM, 12 cm - DVD-Audio - Super Video CD, Super Audio CD, Video CD • Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed. • Do not touch the recorded surface of the discs. • Wipe with a damp cloth and then wipe dry. Notes for the disc e.g., Media handling • Do not attach labels or stickers to discs. • Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. • Do not use the following discs: - Discs with exposed adhesive from removed stickers or labels (rental discs, etc.). - Discs that are badly warped or cracked. - Irregularly shaped discs, such as heart shapes. DO DO NOT

recorded content cannot be recovered. • The unit may breakdown if cigarette smoke or bug spray/vapour, etc. gets inside the unit. Before moving the unit, ensure the disc tray is empty. 1 Switch the unit to standby mode. (Wait until “BYE” disappears from the display.) 2 Remove the AC mains lead from the household mains socket. 3 Move only after the unit has come to a complete stop (approx. 3 minutes) in order to avoid subjecting to vibration and shock. (Even after the unit is switched to standby mode, the HDD continues operating for a short time.) The registration of the USB HDD may be cancelled in the process of repairing this unit. You can use the USB HDD again by re-registering, but all recorded content already on the USB HDD will be lost. In such cases, the recorded content (data) cannot be recovered. This unit may contain private information. Before disposing of or transferring this unit, perform the following to delete the data, including personal or secret information: - Format HDD (> 71) - Perform “Shipping Condition” (> 75) HDD/USB HDD handling care • The HDD is a high precision recording instrument and is easily susceptible to damage. Therefore, be careful of the following points while the unit is turned on, especially during operation, otherwise the HDD and the recorded content may be damaged: - Do not subject the unit to any vibration and shock. - Do not remove the AC mains lead from the household mains socket. • The HDD is a temporary storage device - It is recommended to save the recorded content on a disc or to keep the original data or CDs that they were copied from. - If you notice a problem with the HDD such as repetitive strange sounds, immediately save (backup) all content and request service. If you continue using the HDD with a problem, the unit or the recorded content will be damaged. Setup precautions • Do not place on anything that generates heat like a Set Top Box, etc. • Place in an area where condensation does not occur. Conditions where condensation may occur - When there is an extreme change in temperature (e.g., when subjected to an air conditioner or when cooled air directly impacts the unit). - When there is high humidity or a lot of steam in the room. In the above situation, without turning the unit on, let the unit adjust to the room temperature and wait 2–3 hours until condensation is gone. When moving the unit Cleaning • Wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, carefully read the instructions that came with the cloth. • Use the lens cleaner (not supplied) to clean the unit’s lens. When requesting this unit for repair To dispose or transfer this unit

Instructions for operations are generally described using the remote control. 1 Transmit the remote control signal • Point it at remote control signal sensor on this unit. (> 13) 2 Switch the unit from on to standby mode or vice versa 3 Select drive (HDD, Disc or USB) 4 Select channels and title numbers, etc./Enter numbers or characters 5 Switch to the previously watched channel (> 23) 6 Basic operations for recording and play, REWIND LIVE TV/PAUSE LIVE TV (> 26) 7 Show Information (> 23, 36, 38) 8 Selection/OK, Frame-by-frame (> 39) 9 Show Video Menu (> 34), Top Menu : Show OPTION menu (> 42, 56, 64) ; Colour buttons (Use in accordance with instruction on the screen.) < Start recording (> 27) = Select a conversion mode/recording mode (> 27) > Show the Timer Recording screen (> 31) ? Create chapter (> 39) @ Show Basic Settings menu (> 66) A To delete unwanted recorded titles, timer programmes, video or music (> 42) B TV operation buttons (> 19) C Channel select (> 23)/Change pages in the Video Menu screen etc. D Switching to the radio channel list (> 23) E Exit the menu screen F Show the TV Guide screen (> 25) G Show the FUNCTION MENU screen (> 22) H Return to previous screen I Show subtitles (> 24, 40) J Show Teletext (> 24, 40) K Select audio (> 23, 40) L Skip the specified time (> 39) M Skip approx. 1 minute forward (> 39) N Skip approx. 10 seconds backward (> 39) Remote control STATUS F U N C T I O N M E N U G U I D E RETURN PLAY/x1.3 PAUSE PAUSE LIVE TV STOP SLOW/SEARCH SKIP CH PAGE TV RADIO/ CH AV INPUT  TV DRIVE SELECT  EXIT OK OPTION VOL 0 2abc 5jkl 8tuv 1 4ghi 7qrs p 3def 6mno 9xyz w TIME SLIP PROG/CHECK DELETE SETUP AUDIO -10s +60s REC MODE REC TEXT STTL CHAPTER MANUAL SKIP REWIND LIVE TV LAST VIEW                              

unit to standby mode or remove the media. Such action may result in loss of the media contents. • When inserting the media, ensure that it is facing the right way up. Main unit 1 Remote control signal sensor • Angle: Approx. 20° up and down, 30° left and right • Distance: Within approx. 7 m in front of the unit 2 Open/close disc tray 3 Standby/on switch (Í/I) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 4 CI module eject button (> 14) 5 CI slot (> 14) 6 Disc tray 7 USB port      Display Pull to flip down the front panel.   USB memory Disc Display 1 Drive (HDD or DVD) indicator 2 Disc indicator 3 Copying indicator 4 USB port indicator 5 Remote control signal indicator 6 Timer recording indicator This indicator lights up when the timer recording standby is activated. 7 Main display section indicator • Messages and other information are displayed. (> 85) 8 Playback indicator 9 Recording indicator • The indicator will light up while recording. • The indicator will blink while recording is paused and before recording starts. PLAY COPY USB HDD DVD 1 2 5 6 4 3 7 8 9

An appropriate CI module is required to view or record the encrypted broadcast. You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a subscription with the corresponding broadcaster. • If not viewing/recording an encrypted broadcast, you do not need to insert the CI module. CI module TV service encryption is automatically decrypted and the broadcast can be viewed or recorded. (The recording might be prohibited by broadcasters.) • Turn off the unit before you insert or remove the CI module. • Insert the CAM and the Smart Card with the correct direction. • When removing the CI module, press the CI module eject button and pull it straight out. • For more details, see the manual of the CAM and Smart Card, or consult the dealer. Insert the CI module into the CI slot of this unit. CI slot This unit Smart Card CAM

contents protection, etc. When the CI Plus compatible broadcast is recorded, the title may be contents protected. There are following types of the contents protection depending on the broadcast: • Copying not restricted Depending on the programme, you can copy/move only to USB HDD or DVD-RAM (CPRM compatible discs only). • One generation copy is permitted You can copy to DVD-RAM (CPRM compatible discs only) only once. • The original title will be deleted. • You cannot copy from the copied DVD-RAM (CPRM compatible discs) to HDD or another disc. When convert recording mode, the original title will be deleted. • icon will appear on the Video Menu screen. (> 35) • Copying is prohibited You cannot copy/move to the USB HDD or disc. The content of these media may also have the following playback restrictions. - Retention limit (> right) - Content License (> right) There are some titles for which the playback will be disabled after a predetermined time. (e.g., Permitted playback period is 90 minutes after recording.) • When the title does not have playback period, icon will appear on the Video Menu screen after decrypting. (> 35) • When the title has playback period, or icon will appear on the Video Menu screen after decrypting. (> 35) Playing back a title with this restriction requires a CAM with a playback licence for it. • The number of times the title can be played back may also be limited. • When the title does not have playback period, icon will appear on the Video Menu screen after decrypting. (> 35) • When the title has playback period, icon will appear on the Video Menu screen after decrypting. (> 35) Playing back a title with this restriction requires a CAM and enter the PIN code. • icon will appear on the Video Menu screen. (> 35) Depending on your CAM, the channel list can be updated to the one recommended by the CAM. For details, refer to “About Operator profile”. (> 24) • All CI Plus compatible broadcasts are encrypted. It may take some time to display them. About CI Plus compatible broadcast CI Plus contents protection Retention limit Content License Parental Control Operator profile

3D compatible TV. • Keep the RF coaxial cables as far away as possible from other cables. • Before connection, turn off all equipment and read the appropriate operating instructions. • Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 24p signal, please use HDMI cables 5.0 meters or less. • When the unit is not to be used for a long time To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when the unit is in standby mode. (> 87) [EX97C] Basic connections HDMI VHF/UHF RF IN This unit’s rear panel Household mains socket (AC 220 to 240 V, 50 Hz) AC mains lead (supplied) • Connect only after all other connections are complete. HDMI cable TV To the CATV terminal or the aerial CATV coaxial cable or aerial cable RF coaxial cable 　(supplied)

The following two connection methods are available. Choose a method suited to your environment. A Using a single cable router. B Connecting a satellite cable directly. HDMI This unit’s rear panel Household mains socket (AC 220 to 240 V, 50 Hz) AC mains lead (supplied) • Connect only after all other connections are complete. HDMI cable TV Satellite dish Satellite dish Single cable router

images with this connection if your amplifier/receiver is not 3D compatible. HDMI cable HDMI cable TV Amplifier/ receiver ∫Amplifier/receiver not compatible with 3D 3D programmes can be played back when this unit is connected to a 3D compatible TV. • This connection only supports up to 5.1ch. • When using a TV or an amplifier/receiver that does not display “ARC” on the HDMI terminal, it is necessary to connect the TV and the amplifier/receiver with a digital audio cable to enjoy the TV audio on the amplifier/receiver. HDMI cable HDMI cable TV Amplifier/ receiver

buttons of the remote control. • Perform the setting if you cannot operate the TV with the TV operation buttons. While pressing [TV Í], enter the code with the number buttons. Manufacturer and Code No. • If your TV brand has more than one code listed, select the one that allows correct operation. • If the brand of your TV is not listed or the code number is invalid for your TV, this remote control is not compatible with your TV. TV operation buttons Brand Code Brand Code AIWA 35 BENQ 58/59 BRANDT 10/15 CENTREX 66 CURTIS 05 DESMET 05 ELEMIS 05 FINLUX 61 Panasonic 01/02/03/04 AKAI 27/30 BEKO 05/71/72/73/74 BUSH 05 DAEWOO 64/65 DUAL 05 FERGUSON 10/34 FISHER 21 MITSUBISHI 05/19/20/47 METZ 05/28/79 MIVAR 24 NEC 36 NOKIA 25/26/27/60/61 OLEVIA 45 ORION 05 PHILCO 41/48/64 PHONOLA 05 PROVIEW 52 RADIOLA 05 NOBLEX 33 NORDMENDE 10 ONWA 30/39/70 PEONY 49/69 PHILIPS 05/06/46 PIONEER 37/38 PYE 05 SABA 10 FUJITSU 53 ITT LG GOLDSTAR 05/50/51 GRADIENTE 36 25 JVC 17/30/39/70 KOLIN 45 05/50/51 MAG 52 FUNAI 63/67 GOODMANS 05 GRUNDIG 09 IRRADIO 30 KDS 52 KONKA 62 HITACHI 05/22/23/40/41 SALORA 26 SANSUI 05 32/42/43/65/68 SAMSUNG SCHNEIDER 05/29/30 SELECO 05/25 SIEMENS 09 SONY 08 TELEFUNKEN 10/11/12/13/14 TOSHIBA 16/57 YAMAHA 18/41 05 WHITE WESTINGHOUSE SANYO 21/54/55/56 05/69/75/76/77/78 SEG SINUDYNE 05 31/33/66/67/69 TCL TEVION 52 THOMSON 10/15/44 SHARP 18

Cable broadcast services and digital terrestrial broadcast services. • In these operating instructions, [DVB-C] : indicates features applicable to digital cable broadcasts (DVB-C). [DVB-T] : indicates features applicable to digital terrestrial broadcasts (DVB-T). • This unit can receive only one of the two services at a time. 1 Turn on the TV, then select the appropriate AV input to suit the connections to this unit. 3 Select language, then press [OK]. 4 Select country, then press [OK]. 5 Select “Digital Cable (DVB-C) Channels” or “Digital Terrestrial (DVB-T) Channels”, then press [OK]. 8 Set Quick Start to “On”, “Off” or “Timer Setting for Quick Start”, then press [OK]. 9 Select the item to match the type of TV connected. (> 73, TV Aspect) When “Easy Setting has been completed.” appears, Easy Setting is complete. To stop partway Press [RETURN ]. To restart setup or change TV signal type (> 67, Auto Setup) To confirm that channels have been tuned correctly (> 25, Using Channel List) • If tuning is cancelled partway through, it may not be possible to receive the channels. Restart setup again. [EX97C] Easy Setting 2 Press [Í] on the remote control or [Í/I] on this unit. • The Easy Setting will start at the initial power on. 1 [DVB-C] Select the channel number allocation, then press [OK]. • For Germany and Austria: Normally set to “Preset Channel Number”. • For Switzerland: Normally set to “Operator’s Channel Number ( LCN )”. • To change channel allocation, restart Auto Setup in Basic Settings menu and change channel number allocation selection. (> 67) • If channel is not found, restart Auto Setup in Basic Settings menu. (> 67) 2 [DVB-C] Select “Start Auto Setup”, then press [OK]. • Frequency Auto The preset frequency will be automatically used. Manual Enter the frequency specified by your cable provider with number buttons. • Network ID Auto The preset Network ID will be automatically used. Manual Enter the Network ID specified by your cable provider with number buttons. • Frequency and Network ID settings may be necessary depending on the cable provider. For details, consult the cable provider. 6 Auto Setup will start automatically. (This operation may take some time.) [DVB-C] When tuning is completed, press [OK]. 7 Clock will be set automatically. If the clock setting screen appears, set the time manually (> 75, Clock).

AV input to suit the connections to this unit. 3 Select language, then press [OK]. 4 Select country, then press [OK]. 5 Select the search mode, then press [OK]. 7 Set Quick Start to “On”, “Off” or “Timer Setting for Quick Start”, then press [OK]. 8 Select the item to match the type of TV connected. (> 73, TV Aspect) When “Easy Setting has been completed.” appears, Easy Setting is complete. To stop partway Press [RETURN ]. To restart setup (> 69, Auto Setup) To confirm that channels have been tuned correctly (> 25, Using Channel List) • If tuning is cancelled partway through, it may not be possible to receive the channels. Restart setup again. [EX97S] Easy Setting 2 Press [Í] on the remote control or [Í/I] on this unit. • The Easy Setting will start at the initial power on. 6 Select “Single Cable System” or “DiSEqC” then press [OK]. When selecting “Single Cable System” 1 Make the settings of user band. • User Band You can set C1 to C8. Set to a User Band not used by any other device. • User Band Frequency Set the User Band Frequency with number buttons. • User Band PIN If the single cable router requires a PIN to access an user band, enter the PIN. • For details, read the manual of the single cable router, etc. User Band Settings OK Select RETURN Start Auto Setup Please confirm user band settings before starting Auto Setup. Tuner C1 1284 MHz (preset: 1284 MHz) User Band Frequency Off User Band PIN User Band 2 Select “Start Auto Setup”, then press [OK]. Auto Setup starts. These operations (Searching Satellite and Searching Channels) may take some time. • When selecting “Single Cable System” After tuning has been completed, clock will be set automatically. If the clock setting screen appears, set the time manually (> 75, Clock). Auto Setup RETURN Satellite Progress This will take up to 40 minutes. Checking LNB1 Satellite LNB Press RETURN to skip Satellite installation Searching Satellite Checking... 0% 100% • When selecting “DiSEqC” Auto Setup RETURN Satellite Progress This will take up to 40 minutes. Checking LNB1 Satellite Tuner Press RETURN to skip Satellite installation Searching Satellite Checking... 0% 100%

You can easily access the desired functions, such as playback, timer recording, the unit’s settings etc. via the FUNCTION MENU. 1 Press [FUNCTION MENU]. 2 Select the item, then press [OK]. • TV Guide (> 25) • Contents on HDD - Recorded Programmes (> 34) - Video ( AVCHD ) (> 34) - Video ( MP4 / Xvid / MKV ) (> 36) - Photo (> 54) - Music (> 58) • Timer Recording (> 31) • Setup - Basic Settings (> 66) • You can change the unit’s settings of DVB Tuning, Sound, Display, Connection, etc. - Wallpaper Personalize a background of the FUNCTION MENU. • To select from among “Photo”, register photo in advance. (> 55) • Media - Disc - USB device - USB HDD • Copy Video - Copy Menu (> 48) - Copy Video (AVCHD) to DVD-R (> 53) RETURN FUNCTION MENU OK Media TV Guide Copy Video Setup Timer Recording Contents on HDD FUNCTION MENU list

watched Press [LAST VIEW ]. • This function will work only for the channels you have watched for more than 10 seconds. To switch to the radio channels or to the all channels Press [RADIO/TV]. • Selection of channel is made easy by creating a Favourite of the channels. (> 66, 69, Favourites Edit) Enter the PIN with the number buttons by following the on-screen instructions. • If you decide on a PIN, make a note it in case you forgot it. • PIN (except CAM’s) can be changed via “PIN Entry”. (> 75) • For CAM’s PIN, refer to your CAM’s operating instructions. To watch an encrypted broadcast, insert the CI module into the CI slot. (> 14) • Set “Common Interface”. (> 73) While watching a programme Press [STATUS ]. Channel information appears. 1 Current Category 2 Encrypted broadcast 3 Set timer (> 32) 4 Subtitle 5 Teletext 6 Multiple audio/Sub Channel To show detailed information Press [STATUS ] again. To hide the information screen Press [EXIT ]. To switch between the current programme and the next programme Press [2, 1]. To switch to another channel Press [3, 4], then press [OK]. Press [AUDIO]. • Audio will switch according to the contents of the programme every time it is pressed. Press [CH W X] to select the channel. • You can also select the channel by the following operations. - Using number buttons - Using Channel List (> 25) - Using TV Guide system (> 25) - Using channel information (> right) If this unit requests a PIN If encrypted channels do not appear Using channel information To change Category Press the blue button. • To register your favourite channels 1 Press [OPTION]. 2 Select “Digital TV Menu”, then press [OK]. 3 Select “Favourites Edit”, then press [OK]. 4 Refer to “Favourites Edit”. (> 66, 69) Switching audio 10:30 1 Now Dolby D Change category All DVB Channels NEWS 9:00 - 11:00 Set timer    e.g.,

(> 23) Press [STTL ]. • Press again to hide subtitle. • Some subtitle contents can be displayed using Teletext. (> below) When “ ” appears in channel information (> 23) 2 Use [3, 4, 2, 1], number buttons or colour buttons, etc. according to on-screen instructions. • You can change the display mode. (> 72, Teletext) You can switch the screen mode. Refer to “Switching the aspect ratio of the screen”. (> 79) When a programme includes audio signals etc., you can select signals. 1 Press [OPTION]. 2 Select “Digital TV Menu”, then press [OK]. 3 Select “Multi Audio” or “Sub Channel”, then press [OK]. 4 Select the item. Depending on your CAM, the channel list can be updated to the one recommended by the CAM. To perform an update, operate following the instructions on the screen. • If cancelled, the notification is instead displayed on the channel information (> 23). e.g., To execute channel list upgrade, press the red button. • Performing an update will delete the existing channel list. To return to the original channel list, restart “Auto Setup” in “Basic Settings” menu. (> 67, 69) • The timer recording programmes may be cancelled. Please confirm a timer programme. (> 33) To show subtitle To change subtitle language 1 Press [OPTION]. 2 Select “Subtitle Language” in “Digital TV Menu”, then press [OK]. 3 Select the desired language. • Press [EXIT ] to exit the screen. To show the Teletext 1 Press [TEXT ]. • When the Teletext of data service is displayed, press [TEXT ] again. Aspect To select the contents in the broadcast About Operator profile 10:30 1 Now Dolby D Change category All DVB Channels NEWS 9:00 - 11:00 Operator Profile Info

2 Select the channel, then press [OK]. To skip unwanted channels The channel is skipped next time you select the channel. 1 While watching the broadcast to skip, press [DELETE]. 2 Press [OK]. • [EX97C] [DVB-T] You cannot skip channels. • You can select the channel you have skipped with the number button that corresponds to the channel. • When you want to restore the skipped channel, edit the channel list. (> 67, 69) To edit the channel list Refer to “Channel List”. (> 67, 69) 2 Select the programme, then press [OK]. 3 Select “View”, then press [OK]. To change TV Guide view Press [GUIDE] to switch between “Landscape” view and “Portrait” view. Page up/down Press [CH W X]. To view a programme list for another day Press the green button (Previous) or the yellow button (Next). To see programme information Press [STATUS ]. To retrieve the programme data for the area where data have not been acquired Select the area, then press [STATUS ]. To set a timer Recording using the TV Guide System (> 29) To search the programmes Refer to “To search the programmes”. (> 30) Using Channel List 1 Press [OK]. • To sort the channel, press the red button. • To change the category, press the blue button. All DVB Channels Select View RETURN 7 6 5 4 3 2 1 Category 123/ABC Sorting 123... Page up Page down Channel names Encrypted channel Using TV Guide system 1 Press [GUIDE]. e.g. Landscape view Page Down Information Page Up Search / Select +24 hours Timer Rec. Portrait/Landscape GUIDE TUE 06.01 TV Guide 8:00 - 9:45 TUE 06.01.2015 8:05 Landscape Category: All DVB Channels 8:00 8:30 9:00 9:30 10:00 10:30 OK RETURN

you are watching with this unit’s tuner on HDD. REWIND LIVE TV You can rewind live TV programme to the point where temporary save has started (up to 1.5 hours). PAUSE LIVE TV You can pause live TV programme and restart watching from the paused position. While pausing or rewinding a broadcast: Press [STATUS ]. • Press [STATUS ] again. 1 The time that you can rewind the live programme. 2 The amount of time temporarily saved on HDD. 3 The time of the current playback position. To stop REWIND LIVE TV or PAUSE LIVE TV 1 Press [STOP ∫]. 2 Select “Yes”, then press [OK]. To hide the display information Press [EXIT ]. • Temporary save stops in the following cases: - When switching to other channels or other screen - When performing PAUSE LIVE TV or REWIND LIVE TV for more than 8 hours (This may vary depending on the HDD free space.) • These functions do not work in the following cases: - When the clock is not set - When setting clock manually (Contents protected title (Retention limit) only) (> 15) - While copying - While watching a programme being recorded - When a radio programme is selected - While watching an encrypted programme - REWIND LIVE TV: When “REWIND LIVE TV” is set to “Off” (> 70) REWIND LIVE TV/PAUSE LIVE TV 1 While watching TV REWIND LIVE TV: Press [SLOW/SEARCH 6] to rewind. PAUSE LIVE TV: Press [PAUSE ;] to pause. • The maximum amount of the temporary save is 1.5 hours. 2 When you want to resume: Press [PLAY/a1.3 1]. • You can perform search or Quick View, etc. • If temporary save stops (> right), playback will be performed by that point. Display information Pause 8:05 9:35 8:50    8:50:55 06.01.2015 Play  8:50.50

Recording To convert the recording mode after recording in DR mode Refer to “File Conversion”. (> 44) To confirm whether the conversion is completed Refer to “To confirm whether the conversion is completed”. (> 45) To cancel a conversion Refer to “To cancel a “During standby” conversion”. (> 44) • To record an encrypted broadcast, insert the CI module into the CI slot. (> 14) • If a timer recording reaches its start time when the tuner is being used for recording (OTR), the recording (OTR) terminates. • Following contents or media cannot be played back while recording. - 3D video - video file - photo - USB HDD (For data files, > 9) and USB memory • Copying cannot be performed while recording. • When “Automatic Standby after OTR” is set to “On” (> 74), this unit is turned to standby mode if this unit is not operated for approximately 5 minutes after completing “Automatic Stop” or “Recording Time”. • The title before conversion (the title recorded in DR mode) will be deleted once the conversion is completed. • Conversion will take about the same time as the recorded duration. • When the HDD does not have enough remaining space, conversion will not start. • Conversion is stopped when this unit is turned on. Conversion will start from the beginning again once the unit is switched to standby mode. • When converted, audio content and subtitle will be converted with the same settings as at the start of recording. • When the programme recorded in DR mode is converted, teletext will not be recorded. • About CI Plus restriction (> 15) 1 Select the channel to record. 2 Press [REC MODE] and select the conversion mode, then press [OK]. • This unit will record the programmes in DR mode once, and then automatically convert to the selected recording mode while this unit is in standby. • Recording mode (> 9) • The conversion mode set here is used as an initial value for the next recording. 3 Press [REC ¥]. Recording will start. 4 Select “Automatic Stop”, then press [OK]. • One touch recording (OTR) Recording stops automatically when the programme ends. HG HX HE HL HM XP SP LP EP Off (DR) Conversion Mode Setting OK RETURN HDD Remain (DR) m h High Definition Data Size Large Small Large Small Standard Definition Automatic Stop at 8:45 REC/OTR Recording Time Continuous recording 30 min 8:00 - 8:45 To set the recording time 1 Select “Recording Time” or “Continuous recording” in step 4 (> left). Recording Time: You can set the length of recording time from 30 minutes to 4 hours. • You can select the recording time with [2, 1]. 2 Press [OK].

Press [STATUS ]. Press [STOP ∫]. After displaying the recording programme, press [PAUSE ;]. • Press again to restart recording. (A title is not split into separate titles.) • Timer recording programme cannot be paused. You can play the recording title from the beginning or the titles previously recorded to the HDD. Operation during Recording To check the recording programme e.g., To stop recording HDD REC/OTR AUTO Recording programme displayed on the TV To pause recording Simultaneous rec and play 1 Press [VIDEO MENU]. “[” is displayed on the recording programme. 2 Select the title, then press [OK]. Page Select Start Time Prog.Type: Rec Time Play RETURN Channel Date Title Name Delete Drama 9:00 0:10(DR) 04.10 04.10 29.10 29.10 Channel Date Title Name

When programme information is not displayed correctly, use manual timer recording. (> 31) • You can set the start and finish time to make the timer recording work successfully. (> 70, Timer Record Start Buffer, Timer Record Stop Buffer) Refer to “Using TV Guide system”. (> 25) 1 Select the programme to edit, then press the red button. 2 Select “Timer Rec Edit”, then press [OK]. 3 Go to step 3 on page 31, “Manually programming timer recording”. 1 Select the programme to cancel, then press the red button. 2 Select “Timer Rec Cancel”, then press [OK]. (“F” disappears) Refer to “Operation during Recording”. (> 28) • You can enter up to 32 programmes within a month in advance. (Each daily or weekly programme is counted as one programme.) • About CI Plus restriction (> 15) Preparation If you want to change the recording mode: Press [REC MODE] and select the recording mode, then press [OK]. 1 Press [GUIDE]. TV Guide screen appears. 2 Select the programme, then press the red button. The timer icon “F” (red) is displayed. • If on-screen instructions are displayed, follow them. To use TV Guide system To edit the timer recording on the TV Guide screen To cancel a timer recording on the TV Guide screen Operation during Recording

Press the blue button. 2 Select the item, then press [OK]. Keyword Search Displays programmes including the input keyword. • Refer to “Entering text”. (> 79) Prog.Type Search Displays programmes of the selected type. • Select the programme type, then press [OK]. Category Selection Displays programmes in the selected category. • To return to the previous TV Guide list Select “All DVB Channels”. 3 Select the programme, then press the red button for timer recording. • Category may not be assigned correctly depending on the programme information. • “Keyword Search”, “Prog.Type Search” and “Category Selection” search the First 250 channels on “All DVB Channels”. The recording’s start and stop times can be controlled by the broadcaster, e.g. delayed start. • To use this function, set “Signal Supported Recording” to “ON”. (> 31) • The Signal Supported Recording function may not work if you manually change the start time or the stop time over 10 minutes. • If the signal is not sent correctly, the recording may lack the beginning or the ending part of the programmes. To search the programmes To use Signal Supported Recording If “Overlapped Timer Recording” screen appears To resolve an Overlapped Timer Recording 1 Select “Change”, then press [OK]. 2 Follow the on-screen instructions. Red: Delete programme Yellow: Exit (Overlapping is not resolved) Timer programme overlaps with others. Some part or all of programmes may not be recorded completely. Overlapped Timer Recording Keep Change Repeat Please delete unnecessary programme to resolve. OK RETURN Overlapped Timer Recording New Programme Confirm Delete WED 11.10 TWO Wales Existing Programmes WED 11.10 Holiday 9:00 - 9:45 9:20 - 9:55

[OK]. To confirm and edit the timer programme Refer to “To confirm and edit a timer programme”. (> 33) Operation during Recording Refer to “Operation during Recording”. (> 28) • Signal Supported Recording is disabled when a manually programmed timer recording is set. Select the items and change the items. Channel • You can select Category with the red button. Start/Stop • Press and hold [3, 4] to alter in 15-minute increments. Mode/Conv. Refer to step 2. (> 27) Subtitles You can choose whether or not to record the subtitle at conversion. (Only when item other than “OFF” is selected in “Conv.”) Title Name 1 Select “Title Name”, then press [OK]. 2 Refer to “Entering text”. (> 79) To use Signal Supported Recording You can choose whether or not to use the Signal Supported Recording function by pressing the blue button. Manually programming timer recording 3 Select the items and change the items. (> right, Timer recording options) 4 Press [OK]. The timer programme is stored. Channel Name Schedule Mode Space Timer Recording 30:30 DR HDD TUE 06.01.2015 8:05 New Timer Programme Channel Name Schedule Mode Space Timer Recording 30:30 DR HDD TUE 06.01.2015 8:05 New Timer Programme OK Programme Name WED 07.01 8:00 - 9:00 DR Timer recording options Day/Date • You can select “Date” or “Weekly” by pressing the green button. • Auto Renewal Recording (Only daily/weekly timer recording) The unit will record the new programme over the old one. Press the yellow button. “Renew : ON” is displayed. Timer Recording TUE 06.01.2015 8:05 30:24 DR Channel 1 WED 07.01 Day/Date Stop 8:00 9:00 Start RETURN Title Name DR OFF Mode OFF Conv. Subtitles OK Category HDD Signal Supported Rec Date or Weekly? Signal Supported : OFF e.g.,

next programme. 1 While watching a programme Press [STATUS ]. 3 Press the yellow button. 4 Go to step 3 on page 31, “Manually programming timer recording”. Timer recording from channel information 2 Display the channel information of a programme to record. • Switch the programme with [2, 1]. • Switch the channel with [3, 4]. 10:30 1 Now Dolby D Change category All DVB Channels NEWS 9:00 - 11:00 Set timer e.g., Notes on timer recording • When the programme recorded in DR mode is converted, the audio content and subtitle language will be selected according to the following settings: - “Multi Audio” of “Preferred Language” (> 68, 70) - “Subtitles” of “Preferred Language” (> 68, 70) • When the programme recorded in DR mode is converted, teletext will not be recorded. • (Only when recording broadcast in other than DR mode) This unit will record in the DR mode once, and then convert to the selected mode automatically during standby. • Even if you switch the unit to standby mode during the timer recording, the recording is continued. • When you programme successive timer recordings to start, about last 1 minute of earlier programme will not be recorded. • Timer recording will not start while: - copying a title in high speed mode [with finalising or creating Top Menu ([+RW])] - copying a title in normal speed mode - converting a title in “File Conversion” (Only when “Now” is selected) - copying HD Video (AVCHD) from USB device - copying video/photos/music files - formatting - finalising/creating Top Menu

operations. To exit the timer recording list Press [EXIT ]. To confirm and edit a timer programme To deactivate a timer programme Press the red button. • The timer icon “F” will change from red to grey. • Press the red button again to activate timer recording standby. (The timer icon “F” will change to red.) To delete a timer programme Press [DELETE]. To resolve an overlap timer programme Press the green button. • The overlapped timer recording list will appear. (> 30) To edit a timer programme 1 Press [OK]. 2 Change the timer recording options. • Refer to “Timer recording options”. (> 31) 3 Press [OK]. To show programme information Press [STATUS ]. Channel Name Schedule Mode Space OK RETURN Page Up Page Down Turn Timer Off Total 3/32 Timer Recording 30:30 DR HDD TUE 06.01.2015 8:05 Delete Info Resolve overlap New Timer Programme MON 13.01 MON 13.01 10:00 - 11:50 11:00 - 11:45 11:30 - 1:00 8:00 - 10:45 MON 13.01 TUE 07.01 DR HG DR DR OK OK Guide Guide e.g., Screen icons F Red: Timer recording standby is activated. Grey: Timer recording standby is deactivated. [ Currently recording programme A part or all of the programme will not be recorded since the programme is overlapping. The HDD is full. Copy-protected programme It was not recorded. The recording of the programme was not completed because of some reason. Auto Renewal Recording is set (> 31). Signal Supported Recording (> 31) Displayed if timer recording of two encrypted programmes is overlapping. A part or all of the programme will not be recorded since the encrypted programme is overlapping. OK Displayed if the recording can fit in the remaining space (Date) Daily or weekly timer programme is set. ! It may not be possible to record because: - there is not enough space left. - the number of possible titles has reached its maximum. (> 8) - programmes are deactivated, etc. Guide

SQT0989 34 Playing titles on the HDD Playing back video AVCHD tab • [USB_HDD] When connecting registered USB HDD, “USB HDD” tab and registration number appears. Select “USB HDD” tab. § “For recorded titles (> 9)” only 1 Press [FUNCTION MENU]. 2 Select “Contents on HDD”, then press [OK]. e.g., 3 To play recorded titles: Select “Recorded Programmes”, then press [OK]. The Video Menu screen appears (> right). To play HD Video (AVCHD): Select “Video ( AVCHD )”, then press [OK]. The AVCHD tab appears on the Video Menu screen (> right). To play video files: Select “Video ( MP4 / Xvid / MKV )”, then press [OK]. The video list screen appears (> 36). 4 Select the title, then press [OK]. § Contents on HDD Recorded programmes can be played. OK RETURN Video ( AVCHD ) Recorded Programmes Video ( MP4 / Xvid / MKV ) Photo Music Video Menu screen e.g., 1 Tab (> 36) 2 Programme type 3 AVCHD tab e.g., Time Remaining 45:54 (DR) HDD Page Select Copy Grouped Titles Start Time Prog.Type: Rec time Play RETURN Sport AVCHD Movie Not Viewed Video Menu Channel Date Title Name Titles All Delete Page Up Page Down Movie 9:00 0:01(DR) Social/Economic    Time Remaining 45:54 (DR) Registration number 1 USB-HDD Grouped Titles Sport AVCHD Movie Not Viewed Video Menu All USB-HDD Social/Economic

SQT0989 35 §1 Title cannot be edited (except deleting) or copied. §2 The contents are played back in 1080i. Screen icons [ Currently recording programme Protected title Title was not recorded due to recording protection t Title cannot be played (When data is damaged etc.) Title is copy protected (One generation copy is permitted) §1 Title requires a CAM with a playback licence to play back. • The number of times the title can be played back may also be limited. §1 Title cannot be played back when a certain time has elapsed after the recording. The icon turns grey after the playback period has passed. • Playback period limit can be checked in the information of that title. (> 36, Showing Information) §1 Title is copy restricted. §1 Title requires a CAM with a playback licence to play back. If a certain time has elapsed after the recording, the title cannot be played back. • The number of times the title can be played back may also be limited. Grouped titles Title has not yet been played Title is recorded using a different encoding system from that of the unit. Change the “TV System” (> 73). Radio programme 3D contents Recorded in 1080/50p contents§2 Recorded in 1080/60p contents§2 Recording did not complete as the timer recording has started. Title has a rating level set by the CAM. [EX97C] Title is restricted by Child Lock List or Parental Rating (> 68). &

SQT0989 36 Playing titles on the HDD You can quickly find the recorded titles by selecting the tab. To select the tab Press [2, 1]. To change the displayed programme type tab 1 Select the programme type, then press the green button. 2 Select the item, then press [OK]. Select the title, then press [STATUS ]. To edit the chapter in Chapter View Refer to “Editing chapters”. (> 45) e.g., Tab Showing Information Showing grouped titles 1 Press [OPTION]. 2 Select “Grouped Titles” or “All Titles”, then press [OK]. Grouped Titles: • Two or more titles recorded in the daily/weekly timer recording mode are bundled and displayed as one item. All Titles Playing back grouped titles 1 On the Grouped Titles screen: Select the item marked with . 2 When playing all titles: Press [PLAY/a1.3 1]. When playing the individual title: Press [OK] and select the title, then press [OK]. Editing the grouped titles 1 Select the title or the group, then press the yellow button. • A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 2 Press [OPTION]. 3 Select the item, then press [OK]. Create Group: Selected titles are bundled to form a group. Release Grouping: All the titles in the group are released. Remove: Selected titles are removed from the group. Playback from Chapter View 1 Select the title, then press [OPTION]. 2 Select “Chapter View”, then press [OK]. e.g., [HDD] 3 Select the chapter, then press [OK]. Video list screen Screen icons Folder Titles Move to the parent folder Press OK to start playing from the selected chapter. Selected chapter can be edited via OPTION. Press RETURN to go back to previous menu. Page 001/001 0:00.00 001 0:12.29 Play Select Edit Chapter Mark Play RETURN Delete Parent Folder Videos \ Video \ Folder 01 Folder 02 video01.mpeg video02.mpeg video03.mpeg video04.mpeg HDD Page 0001/0003 Select Parent Folder Play RETURN Delete Page Up Page Down DELETE Play 00.00.0000 00:00 00.00.0000 00:00 00.00.0000 00:00 00.00.0000 00:00

SQT0989 37 Playing titles on the media To play back the playlist created on other equipment 1 Press [FUNCTION MENU]. 2 Select “Disc” in “Media”, then press [OK]. 3 Select “Playlists”, then press [OK]. 4 Select the playlist, then press [OK]. Selecting screen for each operation is displayed when the media is inserted, and you can access the operation screen easily. e.g., [USB] • Display items differ depending on what is recorded in each media. If the menu screen is not displayed, display it by performing the following operation. 1 While stopped Press [FUNCTION MENU]. 2 Select “Media”, then press [OK]. 3 Select the media, then press [OK]. e.g., About screen icons (> 36) e.g., Showing Information Select the title, then press [STATUS ]. § “For data files (> 9)” only 1 Insert the media. • AVCHD: If the menu screen is not displayed Press [PLAY/a1.3 1]. 2 When the Video Menu screen or menu screen etc., appears: Select the item or title, then press [OK]. • Repeat this step if necessary. Menu screen § USB Device OK RETURN USB device is inserted. View Photos Play / Copy Video Play / Copy Music Copy Video ( AVCHD ) Copy New Photos Video list screen Video Menu screen Playback from Chapter View (> 36) USB Parent Folder Videos \ Video \ Folder 01 Folder 02 video01.mpeg video02.mpeg video03.mpeg video04.mpeg Page 0001/0003 Select Copy Parent Folder Play RETURN Page Up Page Down Play 00.00.0000 00:00 00.00.0000 00:00 00.00.0000 00:00 00.00.0000 00:00 Time Remaining 10:30 (DR) DVD-RW Page 003/003 Copy Select All Titles Birds World news Football Dogs and Cats 04.10 04.10 29.10 29.10 Start Time 22:46 Rec time 0:10(HM) Play RETURN Video Menu Channel Date Title Name All Delete Page Up Page Down

SQT0989 38 Operation during play • Discs continue to rotate while menus are displayed. Press [STOP ∫] when you have finished playback to protect the unit’s motor, your TV screen, etc. Press [STATUS ] twice. e.g., Press [STOP ∫]. Press and hold [PLAY/a1.3 1]. • Press again to return to normal speed. • Xvid, MKV, MP4 and MPEG2: Quick View is not effective. • Quick View is not effective when playing back the DVD-RW disc. • Quick View may not work when recording in XP or FR mode. Press [SLOW/SEARCH 6] or [SLOW/SEARCH 5]. • Press [PLAY/a1.3 1] to restart play. • The speed increases up to 5 steps. ([+R] [+RW]: Up to 3 steps) • Xvid, MKV, MP4 and MPEG2: Audio is not heard during all levels search. Press [PAUSE ;]. • Press [PLAY/a1.3 1] to restart play. While paused, press [SLOW/SEARCH 6] or [SLOW/SEARCH 5]. • Press [PLAY/a1.3 1] to restart play. • The speed increases up to 5 steps. • Xvid, MKV, MP4 and MPEG2: Slow-motion is not effective. • AVCHD ([DVD-R]): Forward direction [SLOW/SEARCH 5] only. General operations Status messages Stop Resume play function Press [PLAY/a1.3 1] to restart from the stopped position. • Discs: Only previous stopped position is memorised. The position may be cleared if the tray is opened or the unit is switched to standby mode. 8:05:50 06.01.2015 0:05.14 DR 0:30.00 Remain HDD Quick View Search Pause Slow-motion

SQT0989 39 While paused, press [2] (2;) or [1] (;1). • Each press shows the next frame. • Press and hold to change in succession forward or backward. • Press [PLAY/a1.3 1] to restart play. • Xvid, MKV, MP4 and MPEG2: Frame-by-frame is not effective. • AVCHD ([DVD-R]): Forward direction [1] (;1) only. Skip forward 1 minute: Press [MANUAL SKIP +60s]. Skip backward 10 seconds: Press [MANUAL SKIP -10s]. • Xvid and MKV: Manual Skip is not effective. 1 Press [TIME SLIP]. 2 Select the time with [3, 4]. • Press and hold [3, 4] to change the time by 10-minute. 3 Press [OK]. • Play skips the specified time. • [DVD-V], Xvid, MKV, AVCHD, MP4 and MPEG2: [TIME SLIP] is not effective. [DVD-V] 1 Press [OPTION]. 2 Select “Playback Menu”, then press [OK]. 3 Select “Top Menu” or “Menu”, then press [OK]. Press [SKIP :] or [SKIP 9]. • [HDD] [USB_HDD] (For recorded titles, > 9): It will not skip the title. But the title in the grouped titles will be skipped. (> 36) [HDD] [USB_HDD] (For recorded titles, > 9) [RAM] During the playback or pause Press [CHAPTER]. [HDD] [USB_HDD] (For recorded titles, > 9) [RAM] 1 While paused Press [SKIP :] or [SKIP 9] and skip to the location you want to delete. 2 Press [CHAPTER]. 3 Select “Yes”, then press [OK]. Frame-by-frame Manual Skip Skipping the specified time To display menu Skipping the title or chapter To create Chapter Marks To delete the Chapter Mark

SQT0989 40 Operation during play Press [AUDIO]. • It will switch depending on the contents recorded every time it is pressed. [HDD] [USB_HDD] (For recorded titles, > 9) 1 Press [STTL ]. 2 Press [OK]. 3 Select “On” or “Off”, then press [OK]. • If you want to switch the subtitle language, select it in the Basic Operation menu (> 64). [DVD-V], Xvid and MKV: Display with “Subtitle Settings” in the Basic Operation menu (> 64). • Xvid and MKV: If the subtitles text are not displayed correctly, try changing the language settings (> 70, Subtitle Text). [HDD] [USB_HDD] (For recorded titles, > 9) Press [TEXT ]. • Teletext display mode is TOP (FLOF) only. • Some functions may not work. • Teletext cannot be displayed when the subtitles are set to ON. You can switch the aspect ratio of the screen. (> 79) Preparation Connect 3D compatible TV to this unit. (> 16, 17) • Perform the necessary preparations for the TV. Play back following the instructions displayed on the screen. 3D Type If 3D video cannot be played back in 3D, you may be able to play it in 3D by changing the setting. (> 73) 3D AVCHD Output If 2D AVCHD video is recognised as 3D video and cannot be played back correctly, you may be able to play it by changing the setting. (> 73) 3D Playback Message Hide the 3D viewing warning screen. (> 73) Changing audio Switching subtitles Displaying the Teletext Aspect 3D video playback Preparatory 3D settings

SQT0989 41 Change this setting when the screen is not correctly displayed for 3D compatible programmes. 1 Press [OPTION]. 2 Select “Playback Settings” in “Playback Menu”, then press [OK]. 3 Select “3D Settings”, then press [OK]. 4 Select the item, then press [OK]. Signal Format - Original: Keep original picture format. - Side by side: 3D picture format comprising of left and right screens. Graphic Display Level Adjust the 3D position for the playback menu or message screen etc. • Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue. In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes. • This unit only guarantees the playback of the Frame Sequential and the Side-by-Side (Half) programme types. • Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the 3D setting on the TV. • It may display as Side-by-Side (2 screen structure) when playback of the 3D video is started. Select “Side by side” in “Signal Format”. (> left) • 3D video cannot be played back while recording. 3D settings during playback

content cannot be restored to its original state. Make certain before proceeding. § “For recorded titles (> 9)” only • If the disc is protected, release the protection. (> 77, Disc Protection) [EX97C] • PIN is required to edit the titles with in some functions. (> 35) 1 On the Video Menu screen: Select the title. 2 Press [DELETE]. 3 Select “Delete”, then press [OK]. Multiple selection Select the title, then press the yellow button. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 1 Press [DELETE] while playing. 2 Select “Delete”, then press [OK]. • Available disc space after deleting: - [HDD] [USB_HDD] [RAM] The space deleted becomes available for recording. - [DVD-R] [+R] Available space does not increase even after the contents are deleted. - [DVD-RW] [+RW] Available recording space increases only when the last recorded title is deleted. • Even after deletion is completed, it may take time until the updated available space is displayed. • If the title is contents protected, you may not perform editing other than deleting. (> 15) 1 On the Video Menu screen: Select the title. • Multiple selection (> left) 2 Press [OPTION]. 1 Select “Enter Title Name” in “Edit”, then press [OK]. 2 Refer to “Entering text”. (> 79) Deleting recorded titles Deleting during play § Time Remaining 45:54 (DR) HDD Page Select Copy Grouped Titles Start Time Prog.Type: Rec time Play RETURN Sport AVCHD Movie Not Viewed Video Menu Channel Date Title Name Titles All Delete Page Up Page Down Movie 9:00 0:01(DR) Social/Economic Editing recorded titles 3 Select the item, then press [OK]. e.g., Entering title name Set up Protection Cancel Protection Partial Delete Divide Title File Conversion Enter Title Name Delete Title Playback Information Chapter View Create Group Release Grouping Edit All Titles

Protection setting prevents the title from accidental deletion. [HDD] [USB_HDD] [RAM] [HDD] [USB_HDD] [RAM] To confirm the division point After performing step 2. Select “Preview”, then press [OK]. • The unit plays 10 seconds before and after the division point. To change the division point After performing step 2. Restart play and select “Divide”, then press [OK] at the division point. Setting protection 1 Select “Set up Protection” or “Cancel Protection” in “Edit”, then press [OK]. 2 Select “Yes”, then press [OK]. appears when setting the protection. Partial deleting 1 Select “Partial Delete” in “Edit”, then press [OK]. 2 Press [OK] at the start point and end point to delete. • You can find the desired point by using play, search, etc. (> 38) 3 Select “Continue”, then press [OK]. • Select “Next”, then press [OK] to delete other sections. Up to 20 sections can be set. (> go to step 2) 4 Select “Delete”, then press [OK]. 5 Press [RETURN ]. • Chapter Mark is generated in the scene that was partially deleted. Dividing title 1 Select “Divide Title” in “Edit”, then press [OK]. 2 Press [OK] at the point to divide the title. • You can find the desired point by using play, search, etc. (> 38) 3 Select “Continue”, then press [OK]. 4 Select “Divide”, then press [OK]. • [HDD] [USB_HDD] Divided titles will become a group of titles.

recording mode of the title in DR mode and AVCHD contents. The size of the converted title will be small regularly. It will take about the same time as the recorded duration. To cancel a “Now” conversion Press and hold [RETURN ] for more than 3 seconds. To cancel a “During standby” conversion After performing steps 1–2 (> 42, Editing recorded titles) 1 Select “File Conversion” in “Edit”, then press [OK]. 2 Select “Yes”, then press [OK]. File Conversion 1 Select “File Conversion” in “Edit”, then press [OK]. e.g., 2 Set the conversion options, then press [OK]. Recording Mode (> 9): • [USB_HDD] You cannot select XP, SP, LP and EP mode. Subtitles: • Automatic Subtitles will be recorded if they are included in the title. • Off Subtitle will not be recorded. Timing: • Now Conversion begins immediately after step 4. • Timer recording will not be performed during conversion. • During standby Conversion will be performed after the unit is switched to standby mode. File Conversion Convert the selected title by changing its recording mode. Please select recording mode and other options, then press OK. RETURN Subtitles Off Recording Mode HL -- Longer Play Timing During standby OK 3 Select the item, then press [OK]. Convert & Delete: The original title will be deleted to save HDD capacity after conversion. Convert Only: The original title remains after conversion. • The original title will be deleted after File Conversion, if the selected title is indicated with . (> 15) 4 “Now” conversion: Select “Start”, then press [OK]. “During standby” conversion: Press [OK]. • Conversion will be performed after the unit is switched to standby mode. “COPY” or “CONV” on the front panel display remains lighted during conversion.

completed Press [VIDEO MENU]. e.g., When “±± > ±± (Recording mode for conversion)” is displayed, the conversion has not finished. • To use “File Conversion”, the HDD needs enough storage capacity. • Teletext will not be recorded. • File Conversion is stopped when this unit is turned on during performing “During standby” conversion. Conversion will start from the beginning again once the unit is switched to standby mode. • When converted, the audio content and subtitle language will be selected according to the following settings: - “Multi Audio” of “Preferred Language” (> 68, 70) - “Subtitles” of “Preferred Language” (> 68, 70) • When converted, 3D information may not be retained. [HDD] [USB_HDD] [RAM] 1 Select “Chapter View”, then press [OK]. 2 Perform the editing operations. Playback from Chapter View Refer to “Playback from Chapter View”. (> 36) • The maximum number of chapters: (Depends on the state of recording.) [HDD] [USB_HDD]: Approx. 1000 per title [RAM]: Approx. 1000 per disc • [HDD] [USB_HDD] When the title has the maximum number of chapters, you cannot perform the Resume play function (> 38) with the title. [HDD] 2 Press [DELETE]. 3 Select “Yes”, then press [OK]. • All files in the folder will be deleted. Editing chapters Edit Chapter Mark: Select the point where you want to start a new chapter while viewing the title. 1 Press the green button. 2 Press [OK] at the point you want to divide. • Repeat this step. 3 Press [RETURN ] to go to Chapter View screen. To delete the chapter: 1 Select the chapter, then press [DELETE]. • Multiple selection (> 42) 2 Select “Delete”, then press [OK]. Start Time Prog.Type: Rec time Channel Date Title Name Titles Movie 9:00 0:01(DR HL) 04.10 04.10 29.10 29.10 To combine chapters (Delete chapter mark): 1 Select the chapter, then press [OPTION]. 2 Select “Combine Chapters”, then press [OK]. 3 Select “Combine”, then press [OK]. The selected chapter is combined to the next chapter. Deleting video files on the HDD 1 On the video list screen: Select the file or folder. • Multiple selection (> 42) e.g., Parent Folder Videos \ Video \ Folder 01 Folder 02 video01.mpeg video02.mpeg video03.mpeg video04.mpeg HDD Page 0001/0003 Select Parent Folder Play RETURN Delete Page Up Page Down DELETE Play 00.00.0000 00:00 00.00.0000 00:00 00.00.0000 00:00 00.00.0000 00:00

Refer to “Registering the USB HDD”. (> 62) To copy HD Video (AVCHD) to the DVD-R in High Definition Refer to “Copying HD Video (AVCHD) to the DVD-R in High Definition”. (> 53) To copy video files Refer to “Copying video files”. (> 53) Release the disc protection Refer to “Disc Protection”. (> 77) • If you wish to choose the audio language, select the language from “Multi Audio” of “Preferred Language” before copying (> 68, 70). • Simultaneous operation is not possible while copying with finalising or creating Top Menu. §1 “For recorded titles (> 9)” only §2 The title in the source media will be deleted. §3 The recording mode cannot be changed. 1 Insert or connect the media. 2 Press [FUNCTION MENU]. 3 Select “Recorded Programmes” or “Video ( AVCHD )” in “Contents on HDD”, then press [OK]. 4 Select the title. • Multiple selection Select the title, then press the yellow button. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 5 Press the blue button. If the copy direction selection screen is displayed: Select the copying direction, then press [OK]. 6 Select “Yes”, then press [OK]. • If you select “No”, you can change the selection. (> 47, To change the selection) 7 Set other settings, then press [OK]. (> 47, Setting the copying options) 8 Select “Yes”, then press [OK]. §1, 2, 3

4 Go to step 6. (> 46) Screen icons About screen icons on the Video Menu Refer to “Screen icons”. (> 35) 1 Select the item in step 7 (> 46). e.g., 2 Press [2, 1] to change the settings. • You can perform “Finalise” or “Create Top Menu” later. (> 78) To change the selection 1 Select “No”, then press [OK] in step 6 (> 46). e.g., [HDD] > [DVD-RW] 2 To change the selected titles: Select the title, then press the yellow button. Repeat this step to select titles. To change the picture quality: [HDD] > [RAM] [DVD-R] [DVD-RW] [+R] [+RW] 1 Select the title, then press [OPTION]. 2 Select “Conversion Select”, then press [OK]. 3 Select the picture quality, then press [OK]. Repeat steps if necessary. Titles that will be copied to the disc in normal speed Titles that cannot be copied HDD Page Select Copy Grouped Titles DVD-RW Remain Start Time Prog.Type: Rec time OK RETURN Drama AVCHD Movie Not Viewed Copy Channel Date Title Name Titles All Page Up Page Down Movie 9:00 0:01(DR) 1 2 90% Social/Economic Remaining space The order of copying Setting the copying options • Automatic Standby after Copy On: This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing copy. • Subtitles Automatic: Subtitles will be recorded if they are included in the title. • If you wish to choose the subtitle, select the language from “Subtitles” of “Preferred Language” before copying (> 68, 70). • Finalise On: [DVD-R] [DVD-RW] [+R] The discs become play-only and you can also play them on other DVD equipment. • Create Top Menu On: [+RW] You can play the disc on other DVD equipment. Standby status can be changed if required. Please press OK to start copying. OK RETURN Automatic Standby after Copy Off

2 Select “Play Video”, then press [OK]. 5 Select “Start Copying”, then press [OK]. 6 Select “Yes”, then press [OK]. §1 “For recorded titles (> 9)” only §2 The title in the source media will be deleted. §3 The recording mode cannot be changed. Copying from media other than HDD with Video Menu 1 Insert a disc. The menu screen appears. (> 37) 3 Select the title. • Multiple selection (> 46) 4 Press the blue button. • To change the detailed settings for copy, refer to “Copying titles with copying list”. (> right) Copy 1 2 3 Cancel All Copy Direction Copy Mode Create List Start Copying HDD High Speed RETURN OK 2 Press OK to start copying. Disc Copying titles with copying list [HDD] ,. [USB_HDD]§1, 2, 3 [HDD] > [RAM] [DVD-R] [DVD-RW] [+R] [+RW] [RAM] [+RW] > [HDD] 1 [HDD] ,. [USB_HDD]: 1 Press [FUNCTION MENU]. 2 Select “Copy Menu” in “Copy Video”, then press [OK]. Except “[HDD] ,. [USB_HDD]”: 1 Insert a disc. The menu screen appears. (> 37) 2 Select “Copy”, then press [OK]. 2 Set the copy direction. 1 Select “Copy Direction”, then press [1] (right). 2 Set “Source” and “Destination”. 3 Press [2]. 3 Set the recording mode (> 9). 1 Select “Copy Mode”, then press [1] (right). 2 Set “Recording Mode”. 3 Press [2]. Copy HDD Disc 2 3 Source Destination Cancel All Copy Mode Create List Start Copying High Speed Select the copy direction. RETURN 0 Information of the copy destination - DVD-RW - Copy restricted titles cannot be copied on to disc 1 Copy Direction HDD Disc

6 Select “Start Copying”, then press [OK]. 7 Select “Yes”, then press [OK]. To cancel all registered copying settings and lists After performing step 1 1 Select “Cancel All”, then press [OK]. 2 Select “Yes”, then press [OK]. • If you wish to choose the audio language and subtitle language, select the language from “Multi Audio” of “Preferred Language” before copying (> 68, 70). • Titles in the grouped titles and other titles cannot be registered simultaneously. 4 Register titles for copy. 1 Select “Create List”, then press [1] (right). 2 Select “New item”, then press [OK]. 3 Select the title, then press the yellow button. Repeat this step to select titles. e.g., [HDD] • To change the appearance of the list or show information of the title • The titles will be copied in the order of the copying list. If you want to specify the order, edit the copying list after the titles are selected. (> 50, Editing the copying list) 4 Press [OK]. 5 Press [2]. Data size of each registered title Data size recorded to the copy destination RETURN Time Rec time Size 1360 MB 0:30 (DR) 9:00 Page Select Page Up Page Down HDD OK 001/003 Create List Grouped Titles 01.01 15:00 1 02.01 9:30 1 03.01 10:00 1 03.01 18:30 1 04.01 2:00 1 05.01 11:00 1 05.01 15:00 1 06.01 3:45 1 06.01 9:00 1 01.01 9:00 1 Date Channel Time Title Name Titles Page 01/01 Size: Destination Capacity: No. Size New item (Total=0) Title ( 0% ) 0 MB 3200 MB 5 Make other settings. 1 Select “Other Settings”, then press [1] (right). e.g., • This screen does not appear depending on the copying mode. (> go to step 6) 2 Select the copying option, then press [OK]. (> 47, Setting the copying options) 3 Select the item, then press [OK]. 4 Press [2]. Copy 1 2 3 Cancel All Copy Direction Copy Mode Create List 4 Other Settings Start Copying HDD Disc SP Press OK to change the setting. RETURN 1 Off Off Subtitles Finalise OK

2 Press [OPTION]. 3 Select the item, then press [OK]. About other screen icons (> 35) Editing the copying list Delete All: All titles that you registered to copy are deleted. Add: Add new items to the copying list. 1 Select the titles with the yellow button. 2 Press [OK]. Delete: Selected titles are deleted. • Select the title, then press the yellow button before step 2. Repeat this step to select titles. Move: Change the order of items on the copying list. • Select the title to move before step 2. Select the destination, then press [OK]. Copy 1 2 3 Cancel All Copy Direction Copy Mode Create List 4 Other Settings Start Copying HDD Disc SP Create copy list. 2 Page 01/01 Size: Destination Capacity: No. Size New item (Total=2) Title ( 50% ) 1:00 2:00 01 0:30 DR (25%) 0:30 DR (25%) 02 RETURN OK Screen icons Titles that cannot be copied in high speed mode Titles that cannot be copied Title contains photos • Photos cannot be copied. (NTSC) (PAL) Title recorded using a different encoding system from that of the unit. • Titles displaying these marks cannot be selected.

title to disc in high speed while maintaining the original record mode and recording length. • Converting the recording mode will result in a normal speed copy. • The following recording mode and media combinations support high speed copying. • High speed copy is possible only when there is enough recording capacity on the destination media. • When copying title recorded in 1080/50p or 1080/60p, it cannot copy in progressive. You cannot copy the following titles. - [USB_HDD] Protected titles - [USB_HDD] HD Video (AVCHD) - [RAM] Radio programme • It may not display correctly in 3D when a copied 3D programme is played back. In such a case, change the “Signal Format” during the playback of the title. (> 41) • 3D information may not be copied. Notes for copying Notes for high speed copy Original title’s recording mode Media DR HG HX HE HL HM XP SP LP EP FR § DVD-RAM only • It is impossible to copy at high speed in the following cases: - [HDD] > [DVD-R] [DVD-RW] [+R] [+RW] : • Titles that contain many deleted segments - [HDD] > [+R] [+RW] : • Titles recorded in “EP” mode and “FR (recordings 5 hours or longer)” mode • Titles recorded in 16:9 aspect § Notes for normal speed copy • [DVD-R] [DVD-RW] [+R] [+RW] You cannot copy to the disc in the following cases. - When there is not enough free space on the HDD. - When the number of titles recorded on the disc will exceed its maximum limit if copying is performed. (> 8) • Copying will continue up to the point cancelled. - [DVD-R] [DVD-RW] [+R] [+RW] If copy is cancelled during the step while temporarily copying to the HDD, then nothing will be copied. - [DVD-R] [DVD-RW] [+R] [+RW] Even if the title was not copied to the disc, the amount of remaining writable disc space becomes less. Notes for copying Notes for copying 3D programmes About maintaining the chapter mark • The position of the chapter might shift slightly. • Maximum number of chapters on the disc is limited. - [RAM] [DVD-R] [DVD-RW] : Approx. 1000 - [+R] [+RW] : Approx. 254 (Depends on the state of recording.)

While playing a disc, the content being played is copied to the HDD according to the set time. 1 Press [FUNCTION MENU]. 2 Select “Copy Menu” in “Copy Video”, then press [OK]. 5 Select “Start Copying”, then press [OK]. To stop copying Press [STOP ∫]. • If stopped partway, copying will be up to that point. • Operations and on-screen displays during copy are also recorded. 2 Press [OPTION]. 3 Select “Copy Title Playing”, then press [OK]. To stop copying Press and hold [RETURN ] for 3 seconds. • You can record to or play HDD while high speed copying. Press [OK] to exit the screen display. • Press [STATUS ] to confirm the current progress. Copying a finalised disc 3 Set “Copy Mode”. 1 Select “Copy Mode”, then press [1] (right). 2 Press [OK], then select the recording mode (XP/SP/LP/EP). 3 Press [2]. 4 Set “Copy Time”. 1 Select “Copy Time”, then press [1] (right). 2 Select “Time Setting”, then press [OK]. 3 Select “On” or “Off”. On: Set the copying time. • Set a few minutes longer than the source title, in order to include the operation time before play begins. Off: Copying all the content on the disc. 4 Press [2]. 6 Select “Yes”, then press [OK]. • When the Top Menu is displayed: Select the title you want to start copying, then press [OK]. After the last title on the disc has finished playing the Top Menu is recorded until the set time is reached. 01/02 01 Mouse 03 02 04 Cattle Copying Title Playing [HDD] > [RAM] [DVD-R] [DVD-RW] [+R] [+RW] 1 Play back the title to copy. • Multiple audio, subtitle and Teletext displayed during playback will be copied. - Select the multiple audio with “Multi Audio” in the Basic Operation menu (> 64) - Select the subtitles with “Subtitle Language” in the Basic Operation menu. (> 64) 4 Select “Start”, then press [OK]. Copying will start from the beginning of the title regardless of the playing position. • Speed and recording mode when copying The high speed copy is performed if available. Refer to “Notes for copying”. (> 51) • [RAM] [DVD-R] [DVD-RW] [+R] [+RW] When copying the titles in DR, HG, HX, HE, HL or HM modes, copy will be performed at normal speed in FR mode. • When copying the titles in XP, SP, LP, EP or FR modes and the copy destination does not have enough space, copy will be performed at normal speed in FR mode.

HDD to a DVD-R in High Definition quality. [HDD] > [DVD-R] 1 Insert an unformatted DVD-R or DVD-R DL. The menu screen appears. (> 37) 2 Select “Copy Video ( AVCHD ) to Disc”, then press [OK]. 3 Go to step 4 on page 49, “Copying titles with copying list”. To copy HD Video (AVCHD) from other equipment Refer to “Copying the HD Video (AVCHD)”. (> 60) • When a disc is named, formatting will be automatically performed. Therefore, do not name a disc before this operation. (> 77, Disc Name) • Discs will be automatically finalised after copy. • The following HD Videos (AVCHD) cannot be copied to the disc in high definition. - Exceeding 18 Mbps - 1080/50p or 1080/60p - Without the AVCHD information (video recorded with certain non-Panasonic equipment, etc.) • 3D video may not be copied correctly. 2 Press the blue button. 3 Select “Yes”, then press [OK]. To stop copying Press and hold [RETURN ] for 3 seconds. • While copying, no other operations can be performed. Timer recordings will not proceed. • All files in the folder will be copied. • The names of folders/files cannot be changed after they are copied to the HDD. We recommend that you create a folder with an easily identifiable name on a PC or other device first and use the folder to perform copying. • Up to 1000 files can be copied at once. Copying HD Video (AVCHD) to the DVD-R in High Definition Copying video files [USB] > [HDD] 1 On the video list screen: Select the file or folder. • Multiple selection (> 46) e.g., USB Parent Folder Videos \ Video \ Folder 01 Folder 02 video01.mpeg video02.mpeg video03.mpeg video04.mpeg Page 0001/0003 Select Copy Parent Folder Play RETURN Page Up Page Down Play 00.00.0000 00:00 00.00.0000 00:00 00.00.0000 00:00 00.00.0000 00:00

SQT0989 54 Playing photos Photo and Music Photos imported to the HDD (> 57) are managed using folders. Folders and photos can be edited by pressing [OPTION]. (> 56) • To select the tab Press [2, 1]. • To start Slideshow Refer to “Slideshow settings”. (> 55) • [HDD] To display or exit the Calendar screen Press [PAUSE ;]. §1 “For data files (> 9)” only (JPEG, MPO) §2 [RAM] [DVD-R] [+R] only 1 [HDD] 1 Press [FUNCTION MENU]. 2 Select “Photo” in “Contents on HDD”, then press [OK]. Except [HDD] 1 Insert or connect the media. The menu screen appears. (> 37) 2 Select “View Photos”, then press [OK]. 2 Select the folder, then press [OK]. 3 Select the photo, then press [OK]. • Press [2, 1] to display the previous or next photo. §2 §1 Photo Menu screen Screen icons 3D (Tab) 3D photos (MPO) • Select from this tab to play back in 3D. Photo protected New photo which is not viewed HDD Page Select Slideshow Calendar 03.01.2012 29.10.2012 25.02.2013 15.03.2013 0002/0002 Copy OK RETURN 8 12 18 4 Photo Menu All 3D Page Up Page Down CH e.g., [HDD] Tab

SQT0989 55 1 While displaying a photo: Press [OPTION]. 2 Select the item, then press [OK]. 1 On the Photo Menu screen: Press the green button. 2 Select the item, then press [OK]. To pause the Slideshow Press [PAUSE ;]. • Press [PAUSE ;] again to restart. To stop the Slideshow Press [RETURN ]. Photo play option Graphic Display Level You can change the 3D position of the screen display, etc., during the 3D photo playback. Photo Menu • Start Slideshow You can start a slideshow. • Rotate RIGHT/Rotate LEFT • The information of the rotated photos will not be stored depending on the media. • This function is not available during the 3D photo playback. • Information Information (shooting date etc.) is shown. • Wallpaper A photo being played back is registered as wallpaper on the FUNCTION MENU screen. (> 22) Slideshow settings Start Slideshow You can start a slideshow. Interval You can set up the time until the next photo is to display. Transition Effect§ Effect for the next photo to display can be set. Repeat Play You can set up to play back repeatedly. Music Selection§ You can select background music on (either from HDD or USB) or off. Background Music§ You can select background music from HDD or USB (Folder). Random BGM§ You can play back the BGM (Background Music) in random order. § This function is not available during the 3D photo playback. Slideshow OK RETURN Start Slideshow Interval Transition Effect Repeat Play Normal Fade On Music Selection No background music Background Music No List Random BGM Off

SQT0989 56 Editing photos § [RAM] only 2 Press [OPTION]. • Selectable items will change depending on the media and the type of file. 3 Select the item, then press [OK]. 1 On the Photo Menu screen: To edit the folder: Select the folder. To edit the photo: 1 Select the folder, then press [OK]. 2 Select the photo to edit. • To select multiple folders or photos Press the yellow button when selecting the folder or photo. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. § Enter Folder Name Refer to “Entering text”. (> 79) Combine Folders [HDD] Delete Folder Move Photos [HDD] Select “Move to new folder” or “Move to another folder”, then press [OK]. • If “Move to another folder” is selected, set a destination folder. Delete Photos Set up Protection [RAM] appears. • Even if the protection is set, the photo may be deleted by another unit. Cancel Protection [RAM]

SQT0989 57 Copying photos §1 “For data files (> 9)” only (JPEG, MPO) §2 [RAM] [DVD-R] [+R] only • The name of the copied photos will be changed. If the copy destination selection screen is displayed: Select the copying destination, then press [OK]. To stop copying Press and hold [RETURN ] for 3 seconds. Newly added photos will automatically be copied to the HDD. 4 Once the copy is completed, select “Yes” or “No”, then press [OK]. To stop copying Press and hold [RETURN ] for 3 seconds. • Photos without shooting date will be categorised using the creation date. Selecting and copying the photos [HDD] > [RAM] [RAM] [DVD-R] [+R] [CD] > [HDD] [USB_HDD] [USB] > [HDD] [RAM] 1 On the Photo Menu screen: To copy the folder: Select the folder, then press the blue button. To copy the photo: 1 Select the folder, then press [OK]. 2 Select the photos to copy, then press the blue button. • To select multiple folders or photos Press the yellow button when selecting the folder or photo. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 2 Select “Yes”, then press [OK]. Copying starts. §2 §1 Copying automatically [USB_HDD] [RAM] [DVD-R] [+R] [CD] [USB] > [HDD] 1 Insert the media. The menu screen appears. (> 37) 2 Select “Copy New Photos”, then press [OK]. e.g., [USB] 3 Select “Yes”, then press [OK]. Copying starts. Yes No Start copying ? Copy New Photos OK RETURN HDD USB

SQT0989 58 Playing music §1 “For data files (> 9)” only §2 [DVD-R] [+R] only [CD] (CD-DA) Insert the disc. Playback will automatically start. To play other music (track) Select the item, then press [OK]. [USB_HDD] [DVD-R] [+R] [CD] [USB] 1 Insert or connect the media. The menu screen appears. (> 37) • The track/artist/album name will be displayed if the information is contained in music file. • If there is a large amount of photo data etc. within a music file, play may not be possible. [HDD] 1 Press [FUNCTION MENU]. 2 Select “Music” in “Contents on HDD”, then press [OK]. The music list screen appears. 3 Go to step 3 (> left), “Playing music file on the media”. Press [STOP ∫]. Press [PAUSE ;]. • Press [PLAY/a1.3 1] to restart play. Press [SLOW/SEARCH 6] or [SLOW/SEARCH 5]. • Press [PLAY/a1.3 1] to restart play. Press [SKIP :] or [SKIP 9]. Refer to “Repeat Play” or “Random” in Basic Operation menu (> 64). Refer to “Sound Effects” in Sound Settings menu (> 65). To play music continuously even if the Power off link works Refer to “Playing music continuously even after turning off power to the TV”. (> 63) Playing music CD (CD-DA) Playing music file on the media 2 Select “Play / Copy Music”, then press [OK]. The music list screen appears. 3 Select the item, then press [OK]. • Repeat this step if necessary. Playback will start. §1 §2 Music Menu No. Track Name Play Time Track List 01 02 03 04 05 CD 3.43 0.02 Track 1 e.g., e.g., Parent Folder Music \ Music \ Folder 01 Folder 02 music01.mp3 music02.mp3 music03.mp3 music04.mp3 Page 0001/0003 Select Copy Play RETURN Parent Folder USB Page Up Page Down Screen icons Folder Music Move to the parent folder Playing music file on the HDD Operations during music play Stop Pause Search Skip Repeat Play/Random Sound Effects

SQT0989 59 Copying/Deleting music §1 §2 §1 “For data files (> 9)” only §2 [DVD-R] [+R] only [USB_HDD] [DVD-R] [+R] [CD] [USB] > [HDD] 2 Press the blue button. 3 Select “Yes”, then press [OK]. To stop copying Press and hold [RETURN ] for 3 seconds. Multiple selection Select the file or folder, then press the yellow button. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. • While copying, no other operations can be performed. Timer recordings will not proceed. • All files in the folder will be copied. • Up to 1000 files can be copied at once. [HDD] 1 On the music list screen: Select the file or folder. • Multiple selection (> left) 2 Press [DELETE]. 3 Select “Yes”, then press [OK]. • All files in the folder will be deleted. Copying 1 On the music list screen: Select the file or folder. e.g., Parent Folder Music \ Music \ Folder 01 Folder 02 music01.mp3 music02.mp3 music03.mp3 music04.mp3 Page 0001/0003 Select Copy Play RETURN Parent Folder USB Page Up Page Down Deleting

SQT0989 60 Copying the HD Video (AVCHD) With Other Equipment § “For data files (> 9)” only e.g., Connecting to the Panasonic video camera 2 Select “Copy Video ( AVCHD )”, then press [OK]. 4 Press [OK]. To stop copying Press and hold [RETURN ] for 3 seconds. USB connection cable (optional) 1 Connect the video camera or insert the media. • Make the video camera ready for data transfer. The menu screen appears. (> 37) 3 Select the title, then press the yellow button. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. (All the recordings on the same date become a title.) 5 Select “Start”, then press [OK]. § video camera, etc. Screen icons (NTSC) (PAL) Title recorded using a different encoding system from that of the unit. • Titles displaying these marks cannot be selected.

SQT0989 61 Registering the external HDD (USB HDD) § “For recorded titles (> 9)” only If you intend to move recorded titles to a USB HDD, the USB HDD must be registered to this unit first. Limitation information • A USB HDD with a capacity of less than 160 GB cannot be used. • Registering of a USB HDD will format the USB HDD and all the content already recorded will be deleted. • Up to eight USB HDDs can be registered on this unit. If you have already registered eight USB HDDs, it will be necessary to delete one or more of them before registering a new USB HDD. • Registered USB HDDs cannot be used with devices other than this unit. • Certain non-confirmed USB HDDs cannot be used with this unit. • If a problem occurs with the USB HDD, please contact the manufacturer of the device. Connect this unit with optional USB HDD. • Do not connect additional HDDs using a USB hub. • For details about connection method, refer to the instructions supplied with the USB HDD. Regarding the external HDD (USB HDD) Please use a confirmed USB HDD. For the latest information on confirmed USB HDDs, please check the following website. http://panasonic.jp/support/global/cs/ § Connecting the USB HDD This unit e.g., USB HDD

SQT0989 62 Registering the external HDD (USB HDD) Disconnecting without following this procedure may result in the loss of recorded content from the USB HDD or the internal HDD. 1 Press [SETUP]. 2 Select “Settings for USB HDD” in “HDD / Disc / USB HDD”, then press [OK]. 3 Select “USB HDD Disconnection”, then press [OK]. 4 Select “Yes”, then press [OK]. 5 Disconnect the USB HDD from this unit. • If the registering screen appears when connecting the USB HDD, go to step 4. 1 Press [SETUP]. 2 Select “Settings for USB HDD” in “HDD / Disc / USB HDD”, then press [OK]. 3 Select “USB HDD Registration”, then press [OK]. 5 When the registering is complete, message screen appears. Press [OK]. 6 The confirmation screen appears. Press [OK]. To cancel all USB HDD registrations (> 71) • It is not possible to play back the content on the USB HDD whose registration has been cancelled. • You can check the registration number of the USB HDD on the Video Menu. (> 34) Disconnecting the USB HDD Registering the USB HDD 4 Select “Yes”, then press [OK].

Convenient functions What is VIERA Link? VIERA Link is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or an amplifier/receiver. You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment. When the following operations are performed, the input channel of the TV will be automatically switched and the screen of this unit will be displayed. Additionally when the TV is off, the TV will automatically turn on. - When play starts on this unit - When an action that uses Video Menu etc, is performed When you set the TV to standby mode, this unit is also automatically set to standby mode. • Power off link function does not work when recording, copying etc. The following operations make it possible to keep the power of the unit on and to play music continuously. When the unit is directly connected to an amplifier/receiver. 1 While playing music Press [OPTION]. 2 Select “TV Power Off”, then press [OK]. • Sound may be discontinued for several seconds when the power to the TV is turned off. You can operate this unit using the TV remote control. Refer to the operating instructions of the TV about the buttons that you can use. • VIERA Link, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. • These functions may not work normally depending on the equipment condition. • Use the remote control supplied with this unit if you cannot operate this unit using buttons on the TV remote control. Automatic input switching/ Power on link Power off link Playing music continuously even after turning off power to the TV Easy control only with Panasonic TV’s remote control

be performed from this menu. Available options differ depending on the playing contents and the condition of the unit. 1 Press [OPTION]. 2 Select “Playback Settings” in “Playback Menu” or select “Playback Settings”, then press [OK]. 3 Select the menu, then press [OK]. 4 Select the item, then press [OK]. 5 Change the setting. To clear the Playback menu Press [RETURN ] until the Playback menu disappears. Language ENG English JPN Japanese ARA Arabic FRA French CHI Chinese HIN Hindi DEU German KOR Korean PER Persian ITA Italian MAL Malay IND Indonesian ESP Spanish VIE Vietnamese MRI Maori NLD Dutch THA Thai BUL Bulgarian SVE Swedish POL Polish RUM Romanian NOR Norwegian CES Czech GRE Greek DAN Danish SLK Slovak TUR Turkish POR Portuguese HUN Hungarian ¢ Others RUS Russian FIN Finnish Basic Operation Multi Audio Audio1 (Dolby D) Subtitle Language eng (MPEG) Subtitle Settings On Audio Channel LR Repeat Play Off Aspect Normal Menu Item Setting e.g., Basic Operation Soundtrack§ Show or change the soundtrack. Multi Audio Switch in the case of multiple audio. Audio Channel Change audio (LR/L/R) during playback. Subtitle Settings§ Turn the subtitle on/off, and change the language depending on the media. Subtitle Settings Subtitle Position Subtitle Luminance Subtitle Language Select the subtitle language in the case of multiple languages. Angle§ Change the number to select an angle. Repeat Play Select the item which you want to repeat. Random Select whether to play random or not. Video The original video recording method (MPEG-4 AVC etc.) appears. Aspect (> 79) § With some discs, you may only be able to make changes using the menus on the disc.

Picture Settings Sharpness Adjustment Adjusts the sharpness of images. The greater the value is, the sharper images will be. Noise Reduction Reduces unnecessary noise in videos. The greater the value is, the less noise will appear. Luminance/Colour Adjustment Adjusts the contrast, brightness, white gamma, black gamma, colour saturation and hue. Progressive Select the method of conversion for progressive output to suit the type of title being played. • Auto Automatically detects the film and video content, and appropriately converts it. • Video Select this setting when the content is distorted if “Auto” is selected. • Film Select this if the edges of the film content appear jagged or rough when “Auto” is selected. However, if the video content is distorted, then select “Auto”. Reset to Default Picture Settings Restores the default settings of the Picture Settings menu. Sound Settings Sound Effects • This function is effective when “Digital Audio Output” is set to “PCM”. (> 72) Night Surround Enjoy a movie with powerful sound even when the volume is kept low at night. Re-master 1-2 Sound becomes more natural by adding higher frequency signals not recorded on the track. Dialogue Enhancer The volume of the centre channel is raised to make dialogue easier to hear. 3D Settings (> 41) Signal Format Graphic Display Level

Sound, Display, Connection etc. in the menu. 1 Press [SETUP]. 2 Select the menu, then press [OK]. To return to the previous screen Press [RETURN ]. 3 Select the item, then make the setting. • Follow the instructions on the screen if further operations are necessary. • Depending on the connection or the status of this unit some items cannot be selected or changed. Basic Settings OK RETURN DVB Tuning HDD / Disc / USB HDD Picture Sound Display Connection Others [EX97C] DVB Tuning Favourites Edit You can create four favourites of channels for making viewing and recording easier. After editing as follows, save the Favourites. Press [RETURN ], then press [OK]. • To select the other Favourites list: Press the green button. • To add channels to the Favourites list: Select the channel in the “All DVB Channels” column, then press [OK]. Repeat this step. • Red: Change the sorting mode. • Yellow: Add continuous block of channels to the list at once. • Press [3, 4] to make the block, then press [OK]. • Blue: Select the Category. • To change the order of the channels list: 1 Select the channel in the “Favourites” column to move, then press the green button. 2 Select the new position, then press the green button. • To delete channels: Select the channel in the “Favourites” column, then press [OK]. • Yellow: Delete all channels. • To change the name of the Favourites list: 1 Press the red button in the “Favourites” column. 2 Press [3, 4, 2, 1] to select a character, then press [OK]. Repeat this step to enter other characters. • Red: Delete a character. • Blue: Delete all characters. 3 Press [RETURN ].

1 Select “Yes”, then press [OK]. • If the country selection screen appears: Select the country, then press [OK]. 2 Follow the on-screen instructions and make the following settings. [DVB-C] 1 Select “Digital Cable (DVB-C) Channels”, then press [OK]. 2 Select “Preset Channel Number” or “Operator’s Channel Number ( LCN )”, then press [OK]. 3 Select the items and change the items. (For details, consult the cable provider.) Search Mode • All Channels • Free Channels Scan Mode • Quick: Scans the suitable frequency for the selected country. • Full: Scans the whole frequency range. Frequency/Symbol Rate/Network ID Normally set to “Auto”. If “Auto” is not displayed or if necessary, enter the value specified by your cable provider with number buttons. 4 Select “Start scan”, then press [OK]. Auto Setup starts. [DVB-T] Select “Digital Terrestrial (DVB-T) Channels”, then press [OK]. Auto Setup starts. • The timer recording programmes are cancelled. • If the channel you are looking for is not found, select “Full” for “Scan Mode”. (> above) [DVB-C] Settings for DVB-C Channels [DVB-T] Settings for DVB-T Channels Channel List You can edit the channel list. • To hide/reveal channels 1 Select the channel. 2 Press [OK]. The check mark is removed/displayed. • Red: Change the sorting mode. • Yellow: Reveal all channels. • Blue: Change the Category. • To move the channel number assignment 1 Select the channel to move, then press the green button. 2 Enter the channel number to reassign with the number buttons. 3 Press [OK]. Manual Tuning You can add new channels manually. [DVB-C] 1 Adjust the frequency, symbol rate and service ID. (For details, consult the cable provider.) • Adjust the frequency by checking the signal strength and signal quality displays. 2 Select “Start scan”, then press [OK]. • The set channel is displayed in the table. [DVB-T] 1 Press [3, 4] to select the frequency. • Adjust the frequency by checking the signal strength and signal quality displays. 2 Press [OK] to start scan. • The set channel is displayed in the table. [DVB-C] • This function is not available during an Operator profile update. (> 24)

You can update the channel list to the latest one. [DVB-C] • This function is not available during an Operator profile update. (> 24) Signal Condition You can check the quality and strength of signals. Press [CH W X] to select the channel. [DVB-C] • When the signal is too strong (red bar), reduce the CATV signal. (For details, consult your dealer or the cable provider.) • When the signal is weak, check that the current broadcast channel is correctly broadcasting. [DVB-T] • The channels you can receive are affected by weather conditions, seasons, time (day/night), region, length of the cable that is connected to the aerial, etc. • When the signal is too strong (red bar), reduce the signal amplification at your aerial. (For details, consult your dealer.) New Channel Message Set whether to obtain the information automatically when a new DVB channel is added. Child Lock You can restrict the viewing/playback/recording of channels unsuitable to children. • PIN is required to change. (> 23) Child Lock List 1 Select the channel to lock. 2 Press [OK]. is displayed. • Press [OK] again to cancel. • Green: Lock all channels. • Yellow: Unlock all channels. Parental Rating Set a ratings level to limit broadcast viewing and playback. • Follow the on-screen instructions. Preferred Language Select the language for multi broadcast. If the selected language is not available, the original language will be selected.

Favourites Edit (> 66) Channel List (> 67) Auto Setup You can restart the Auto Setup. (> 21) 1 Select the Auto Setup method, then press [OK]. • Search by selected satellite Transponders for the already found satellite are searched for channels. • Search all satellites All satellites and transponders are searched for channels. 2 Select “Yes”, then press [OK]. • The timer recording programmes are cancelled. Manual Tuning You can add new channels manually. 1 Select the items and change the items. • Change the items by checking the signal strength and signal quality displays. 2 Select “Start scan”, press [OK] to start scan. • The set channel is displayed in the table. • This function is not available during an Operator profile update. (> 24) Update Channel List You can update the channel list to the latest one. 1 Select the method and settings. Search Mode • Free Channels • All Channels Scan Mode • Quick Scans the suitable frequency for the selected satellite. • Full Scans the whole frequency range. 2 Press [OK]. The unit starts searching for newly available satellite digital channels. • This function is not available during an Operator profile update. (> 24) • If the channel you are looking for is not found, select “Full” for “Scan Mode”. (> above) Signal Condition You can check the quality and strength of signals. • Press [2, 1] to select the LNB. • Press [CH W X] to select the channel. • The channels you can receive are affected by weather conditions, seasons, time (day/night), region, length of the cable that is connected to the aerial, etc. • When the signal is too strong (red bar), reduce the signal amplification at your aerial. • When the signal is weak: - adjust the position and direction of the dish. - check that the current digital broadcast channel is correctly broadcasting.

DiSEqC control antenna system or single cable router. 1 Select “Antenna System”. 2 Press [2, 1] to select antenna system. • One LNB Compatible with Single LNB. • MiniDiSEqC Up to 2 LNBs can be controlled. • DiSEqC1.0 Up to 4 LNBs can be controlled. • Single Cable Compatible with single cable router. LNB Configuration You can set LNB setting and User Band when necessary. • If you do not know the connected satellite, select “No Satellite” in “Satellite”. (Available satellite will be searched in Auto Setup.) • If you select “User defined” in “Satellite”, set “Test Transponder Frequency” manually. Preferred Language (> 68) HDD / Disc / USB HDD Settings for Playback Soundtrack Select the audio language. • Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 84, Language code list) Subtitles Select the language for subtitle. • Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 84, Language code list) Menu Select the language for disc menus. • Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 84, Language code list) DVD-Video Parental Control Set a rating level to limit DVD-Video play. • PIN is required to change. (> 23) Subtitle Text Select the language for Xvid and MKV subtitles text. • This item is displayed only after playing back a Xvid or MKV file with subtitle text. Settings for Recording Timer Record Start Buffer This function sets the timer recording to start earlier than the TV Guide time. Timer Record Stop Buffer This function sets the timer recording to stop later than the TV Guide time. REWIND LIVE TV Turn on/off the REWIND LIVE TV function. • When “Automatic Standby” is set to “Off” (> 74), “On” cannot be selected.

If your CAM requires a PIN for timer recording, it can be entered here in advance. Aspect for Recording Sets the aspect ratio when recording or copying except in DR mode. • “HG”, “HX”, “HE”, “HL” or “HM” mode: If “Automatic” is selected, the title will be recorded with the original aspect ratio. • “XP”, “SP”, “LP” or “FR (recordings less than 5 hours)” mode: If “Automatic” is selected, the title will be recorded with the original aspect ratio at the time when recording started (including when recording started at a commercial, etc.). • “EP” or “FR (recordings 5 hours or longer)” mode: If “Automatic” is selected, aspect is fixed to 4:3. • In the following cases, aspect is fixed to 4:3. - When recording to a +R, +R DL and +RW. Chapter Creation Set the Chapter Creation method. • Even if “Automatic” is selected, depending on the programme to be recorded, the chapter may not be created correctly. Disc Speed for High Speed Copy Select the speed of high-speed copying. HDD Management Press and hold [OK] for 3 seconds to show the following settings. Delete all titles Delete all recorded programmes and AVCHD on the built-in HDD. • Delete does not work if one or more titles are protected. Delete all videos ( MP4 / Xvid / MKV ) Delete all videos (MP4/Xvid/MKV) on the built-in HDD. Delete all photos Delete all photos on the built-in HDD. Delete all music Delete all Music on the built-in HDD. Format HDD Formatting deletes all contents on the built-in HDD, and they cannot be restored. Check carefully before proceeding. Settings for USB HDD USB HDD Registration Register the USB HDD. (> 62) USB HDD Disconnection This function puts the USB HDD in a state in which it can be safely disconnected. (> 62) USB HDD Management Press and hold [OK] for 3 seconds to show the following settings. Delete all titles Delete all titles on the USB HDD. • Delete does not work if one or more titles are protected. Format USB HDD Formatting deletes all contents, and they cannot be restored. Check carefully before proceeding. Cancellation of all USB HDD Registrations This function cancels the registrations of all the USB HDDs registered on this unit. Only do this if you are going to dispose of this unit. • Before operation, perform “USB HDD Disconnection” (> above) and remove the USB HDD.

play. • Field: Select if jittering occurs when “Automatic” is selected. (The picture is coarser.) • Frame: Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected. (The picture is clearer and finer.) Sound Dynamic Range Compression To lower the dynamic range for playback (e.g., at night). • This does not work depending on broadcasts and recorded titles. Downmix Select the downmix system of multi-channel to 2-channels sound. • Select “Surround encoded”, when the connected equipment supports the virtual surround function. • There is no effect on “Bitstream” via HDMI AV OUT terminal. • The audio will be output in “Stereo” in the following cases. - AVCHD playback Bilingual Audio Selection Select whether to record the audio type (“M1” or “M2”) when: - File Conversion (> 44) - Copying to a DVD-R, DVD-RW, +R and +RW. Digital Audio Output Dolby Digital/Dolby Digital Plus DTS MPEG Select the audio signal to output. • Select “PCM” when the connected equipment cannot decode the respective audio format. • Not making the proper settings may result in noise. System Volume Adjustment If the volume of a programme being watched through this unit is different than the volume of a programme being watched directly on the TV, changing this setting may reduce the gap. (This function works only while you are watching a programme or playing back a programme recorded in DR mode with this unit.) Audio Delay Mis-sync between the video and audio is corrected by delaying the audio output. Display Language Select the language for on-screen menus. On-Screen Information Select the time until the channel information screen (> 23) disappears automatically. Front Panel Display Changes the brightness of the front panel display. • If “Automatic” is selected, the display turns dark during play and disappears when the unit is in standby mode. While using this mode, the standby power consumption can be reduced. • When “Quick Start” is set to “Off” or “Timer Setting for Quick Start” (> 74), this function is fixed to “Automatic”. Screen Saver This is to prevent image retention on the screen. Teletext Select the Teletext (> 24) display mode.

may be able to play it in 3D by changing the setting. • Change the settings for 3D on the TV also when “Side by side” is selected. 3D AVCHD Output If 2D AVCHD video is recognised as 3D video and cannot be played back correctly, you may be able to play it by changing the setting. 3D Playback Message Set to display or hide the 3D viewing warning screen. TV Aspect Set to match the type of TV connected. • Pan & Scan: Side picture is trimmed for 16:9 picture. The pictures may be shown in the letterbox style depending on the content. • Letterbox: Black bands appear for 16:9 picture. Aspect for 4:3 Video To play a 4:3 title, set how to show pictures on a 16:9 TV. • 4:3: Picture output expands left or right. • 16:9: Picture is output as original aspect with side panels. TV System Set in accordance with the TV System for the connected TV. HDMI Connection HDMI Video Format You can only select items compatible with the connected equipment. • If “Automatic” is selected, the output resolution best suited to the connected TV (1080i, 720p or 576p/480p) is automatically selected. Deep Colour Output This setting is for selecting whether to use Deep Colour output when a TV that supports Deep Colour is connected. Contents Type Flag If “Automatic” is selected, the optimal method of playback depending on the TV (e.g. cinema) will automatically be selected (only when the TV supports Contents Type Flag). VIERA Link Select “Off” when you do not want to use VIERA Link. Common Interface Access to software contained on CI module. (> 14) • Select “Slot :” and press [OK]. Follow the on-screen instructions. • On-screen instructions may not correspond to the remote control buttons. • For more information about TV service, please contact your service provider. • Depending on the card, in some cases its use together with this unit may be limited or not possible.

mode. • Off: Power consumption in standby mode is minimised. (> 87) However, startup time from standby mode will be longer. • Timer Setting for Quick Start: “Quick Start” is activated when the set time comes. • If “Off” or “Timer Setting for Quick Start” is selected, the setting for “Front Panel Display” in “Display” is fixed to “Automatic”. (> 72) Automatic Standby Set the time to turn the unit to standby mode automatically. When the unit is not operating, the unit will be turned to standby mode once the set time has passed. • When “REWIND LIVE TV” is set to “On” (> 70), “Off” cannot be selected. Automatic Standby after OTR • On: This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing “Automatic Stop” or “Recording Time” (> 27). Automatic Standby after Copy • On: This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing copy (> 48, Copying from media other than HDD with Video Menu, Copying titles with copying list). [EX97C] [DVB-C] RF OUT ( CATV Signal ) [DVB-T] RF OUT ( Aerial Signal ) Set whether to output the broadcasting signal from RF OUT or not while in standby mode (When “Quick Start” is not activated). • If “On” is selected, the broadcasting signal is output from this unit. Remote Control Change the remote control code on the main unit and the remote control if you place other Panasonic products close together. • Use “DVD 1”, the factory set code, under normal circumstances. 1 Select the code, then press [OK]. 2 While pressing [OK], press and hold the number button ([1] to [6]) for more than 5 seconds. 3 Press and hold [OK] for more than 5 seconds. 4 Press [OK].

listed in the method below. • Automatic This unit usually obtains time and date information from digital broadcasts. • Time Zone When the time is not correct, set “Time Zone”. (GMT ` 6 to r 6) • Manual Setting 1 Select “Off” of “Automatic”, then press [OK]. 2 Select the item you want to change. 3 Change the setting. 4 Press [OK] when you have finished the settings. • When the clock is set manually, you cannot perform playing/recording/PAUSE LIVE TV/REWIND LIVE TV of the programmes that are copy protected (Retention limit). (> 15) PIN Entry You can set/change the PIN for parental control. 1 Enter your 4-digit PIN with the number buttons. 2 Enter the new 4-digit PIN with the number buttons. • Make a note of PIN in case you forget it. e.g., 3 Press [OK]. OK Remember the PIN. PIN Entry 0 0 0 0 System Update Software Update in Standby When you set this unit to standby mode, software (firmware) updates (> 76) are downloaded automatically at the time you have specified. Software Update Now ( Broadcast ) Refer to “Software (Firmware) Update”. (> 76) Software Licence Information about the software licence is displayed. System Information Display Software (firmware) version of this unit. Initialize Shipping Condition All the settings except for some settings return to the factory preset. • The timer recording programmes are also cancelled. Default Settings All the settings other than the tuning settings, clock settings, disc language settings, rating PIN, remote control code, etc. return to the factory presets.

Software of this unit can be updated automatically by the following methods at the specified time. If a software (firmware) update is available, a notification is displayed. Update of the software (firmware) will start when the unit is turned to standby mode. • Use a USB device You can download the latest firmware from the following website and store it to a USB device to update the firmware. http://panasonic.jp/support/global/cs/ (This site is in English only.) • The timer recording always takes preference over the software (firmware) download; if the timer recording is scheduled to start, the downloading will be performed at the next opportunity. Software (firmware) of CAM (compatible CI Plus) can be updated automatically from broadcasts. Availability of software (firmware) update is detected while viewing the programmes that are compatible with CI Plus. 2 Follow the instructions on the screen. • Operations such as view, playback, or record cannot be performed while upgrading the CAM. Any buttons on the remote control or the unit cannot be used while upgrading the CAM. • If the timer recording is started, CAM software upgrade is cancelled to start recording. • For details, refer to your CAM’s operating instructions or consult your dealer. You cannot operate the unit until the update is complete. Don’t remove the AC mains lead during the update. Removing the AC mains lead while the update is in progress may damage the unit. Update software (firmware) of this unit • [EX97S] From broadcasts (Default setting is 3 a.m. > 75, Software Update in Standby) [EX97S] To update the software (firmware) immediately Use the “Software Update Now ( Broadcast )” function. (> 75) New software version has been found. The software will be updated automatically after this unit is switched to standby. Do not disconnect the AC mains lead. CI Plus compatible CAM software (firmware) update 1 When notification is displayed on the screen, select “Yes” and press [OK]. • If for some reason the notification is not displayed, or if cancelled, the notification is instead displayed on the channel information (> 23). e.g., To execute CAM software upgrade, press the red button. 10:30 Now Dolby D Change category All DVB Channels NEWS 9:00 - 11:00 CAM Upgrade Info

1 Press [FUNCTION MENU]. 2 Select “Media”, then press [OK]. [RAM] [DVD-R] [DVD-RW] [+R] [+RW] This function is to name a disc. Refer to “Entering text”. (> 79) • The disc name is displayed in the DVD Management window. • [DVD-R] [DVD-RW] [+R] With a finalised disc, the name is displayed on the Top Menu. • [+RW] The disc name is displayed only if you play the disc on other equipment after creating Top Menu. • Do not perform this operation before copying HD Video (AVCHD) to DVD-R or DVD-R DL. (> 53) [RAM] Select “Yes”, then press [OK]. e.g., [RAM] • Photo data (JPEG/MPO) or computer data cannot be deleted. [RAM] [DVD-RW] [+RW] [+R] (New disc only) Formatting deletes all contents (including computer data), and they cannot be restored. Check carefully before proceeding. 1 Select “Yes”, then press [OK]. 2 Select “Start”, then press [OK]. 3 Press [OK]. [RAM] To stop formatting Press [RETURN ]. • You can cancel formatting if it takes more than 2 minutes. The disc must be reformatted if you do this. • Do not disconnect the AC mains lead while formatting. This can cause the disc unusable. • The contents are deleted when you format a disc even if you have set protection. • [RAM] Formatting normally takes a few minutes; however, it may take up to a maximum of 70 minutes. • When a disc has been formatted using this unit, it may not be possible to use it on any other equipment. • It will become DVD Video format when a DVD-RW recorded in DVD Video Recording format is formatted with this unit. Media management 3 Select the media, then press [OK]. 4 Select the item, then press [OK]. • Selectable items will change depending on the selected item and inserted media. Disc Name Disc Protection • To release the protection Repeat the same steps. • The screen icon will be switched to “Off”. On Disc Name Delete all titles Disc Protection Delete all titles 1 Select “Yes”, then press [OK]. 2 Select “Start”, then press [OK]. Format Disc

You can select the background for DVD-Video Top Menu. Select the background, then press [OK]. [DVD-R] [DVD-RW] [+R] [+RW] You can select whether to show the Top Menu after finalising or creating Top Menu. Select “Top Menu” or “Title 1”, then press [OK]. Top Menu: The Top Menu appears first. Title 1: The disc content is played without displaying the Top Menu. [DVD-R] [DVD-RW] [+R] (You can play the disc on compatible DVD players by finalising it on the unit.) 1 Select “Yes”, then press [OK]. 2 Select “Start”, then press [OK]. 3 Press [OK]. After finalising • [DVD-R] [+R] The disc becomes play-only and you can no longer record or edit. • [DVD-RW] You can record and edit the disc after formatting. • Do not disconnect the AC mains lead while finalising. This can cause the disc unusable. • You cannot cancel finalising. • Finalising takes up to 15 minutes (Up to 60 minutes in case of DVD-R DL and +R DL). • Depending on the disc, it may take longer than displayed on the confirmation screen (approximately four times longer). • You cannot finalise discs recorded on other manufacturer’s equipment. • [DVD-R] [DVD-RW] [+R] If you finalise discs recorded on Panasonic equipment other than this unit, the background selected as “Top Menu” may not be displayed. • Discs finalised on this unit may not be playable on other players due to the condition of the recording. [+RW] You can create Top Menu for displaying on other equipment. Make selections from “Top Menu” and “Auto-Play Select” before creating Top Menu. 1 Select “Yes”, then press [OK]. 2 Select “Start”, then press [OK]. 3 Press [OK]. • You cannot use the Top Menu for playing on this unit. • The created menu is deleted when you record or edit the disc. The HOLD function deactivates all buttons on the unit and remote control. Press and hold [OK] and [RETURN ] simultaneously until “X HOLD” appears on the front panel display. To cancel the HOLD function Press and hold [OK] and [RETURN ] simultaneously until “X HOLD” disappears. Top Menu Auto-Play Select Finalise Create Top Menu HOLD function

To end partway Press [RETURN ]. (Text is not added.) • The maximum number of characters depends on the media. When the image does not match the screen size of the TV, you can enlarge the image to fill the screen. 1 Press [OPTION]. 2 Select “Playback Settings” in “Playback Menu”, then press [OK]. 3 Select “Aspect” in “Basic Operation”, then press [OK]. 4 Select the item, then press [OK]. • This function does not work on 3D contents. • The screen mode is switched to “Normal” in the following situations: - when you change the channel - when you start or end the playback of a title - when you switch the unit on or to standby mode. • [DVD-V] “Side cut” does not have any effect. • When “TV Aspect” (> 73) is set to “Pan & Scan” or “Letterbox”, the “Zoom” effect is disabled. Entering text 1 Select a character, then press [OK]. Repeat this step to enter other characters. • Green: Enter Alphanumeric characters • Red: Enter Symbols • Yellow: Enter Other Characters, such as umlaut mark or accent grave • [PAUSE ;]: Delete a character • [PLAY/a1.3 1]: Shift the alphabetic characters on the screen to upper case/lower case 2 Press [STOP ∫] (Finish). “Writing...” appears then the screen returns to the previous screen and so on. OK RETURN 1 q a z Delete 2 w x / 3 e c : 4 r v ~ 5 t b _ 6 y n - 7 u m , 8 i @ ; 9 o * ‘ 0 p s d f g h j k l . # “ Symbols Alphanumeric Shift Enter Title Name Finish Other Characters Name field: shows the text you have entered e.g., Switching the aspect ratio of the screen Normal: Normal output Side cut: The black bars on the right and left sides of the 16:9 image disappear and the image is enlarged. Zoom: The black bars on the top and bottom sides of the 4:3 image disappear and the image is enlarged.

checks. If the problem still persists, consult your dealer for instructions. Updating to the latest software (firmware) may solve the problem. (> 76) The remote control does not work. • The remote control and main unit are using different codes. Change the code on the remote control. The followings do not indicate a problem with this unit: • Regular disc rotating sounds or HDD rotating sounds. • Poor reception due to atmospheric conditions. • When you switch the unit on or to standby mode, there may be an unexpected sound. General operation The unit does not work. • Check the connections. (> 16, 17) • One of the unit’s safety devices may have been activated. Reset the unit as follows: 1 Press [Í/I] on the main unit to switch the unit to standby. • If the unit does not switch to standby, press [Í/I] on the main unit for about 3 seconds. The unit is forcibly switched to standby. Alternatively, disconnect the AC mains lead, wait one minute, then reconnect it. 2 Press [Í/I] on the main unit to switch it on. If the unit still cannot be operated, consult the dealer. Cannot eject a disc. 1 When the unit is Off, press and hold [OK], the yellow button and the blue button at the same time for more than 5 seconds. • “00 RET” is displayed on the front panel display. 2 Repeatedly press [1] (right) until “06 FTO” is displayed on the front panel display. 3 Press [OK]. Front panel display Press and hold [OK] and the indicated number button at the same time for more than 5 seconds. (> 74) Startup is slow. • Startup takes time in the following situations: - A disc is inserted. - The clock is not set. - Immediately after a power failure or the AC mains lead is connected. - When the “Quick Start” is not activated. (> 74)

• Set the clock. (> 75) The clock does not display on the unit when switched to standby. • The clock does not display when “Front Panel Display” is set to “Automatic”. (> 72) Screen size is wrong. • Check the “TV Aspect” or “Aspect for 4:3 Video”. (> 73) • Adjust the aspect ratio setting on TV. • Adjust the aspect ratio setting on this unit. (> 79) • Check “Aspect for Recording” before recording or file conversion. (> 71) [EX97C] TV reception is not displayed. • Broadcast signals are not output from this unit’s RF OUT terminal. Select “On” in “RF OUT ( CATV Signal )” or “RF OUT ( Aerial Signal )”. (> 74) The black screen appears on the TV. • This phenomenon may occur, depending on the TV setting, when “Quick Start” is activated. Depending on the TV, this phenomenon may be prevented by reconnecting to a different HDMI input terminal. The screen changes automatically. • If “Screen Saver” is set to “On”, the screen saver function will be activated when there is no operation for 5 minutes or more. (> 72) There is a lot of image lag when playing video. • Set to “0” all items in the “Noise Reduction”. (> 65) • Set “Audio Delay”. (> 72) • The unit’s TV System is different from that of the disc. Change the TV System. (> 73, TV System) • The picture may be distorted or a black screen may appear between scenes recorded with different aspect ratios. • Set “Deep Colour Output” (> 73) or “Contents Type Flag” (> 73) to “Off”. 3D video is not output correctly. • 3D video may be output correctly by changing the following settings: - “3D Type” of “3D Settings” (> 73) - “Signal Format” (> 41, 3D settings during playback) • Check the settings of the connected TV. • When a non-3D compatible amplifier/receiver is connected between this unit and a TV, 3D video is not output. (> 18) Displays TV screen and video The images do not appear on the TV. The picture is distorted during play, or video is not played correctly. • Check the connections. (> 16, 17) • Check the settings of the connected TV, etc. • An incorrect resolution is selected in “HDMI Video Format”. (> 73) Reset the setting as follows: 1 While the unit is on, press and hold [OK], the yellow button and the blue button at the same time for more than 5 seconds. • “00 RET” is displayed on the front panel display. 2 Repeatedly press [1] (right) until “04 PRG” is displayed on the front panel display. 3 Press and hold [OK] for at least 3 seconds. Set the item again.

• Check the settings of the connected TV, etc. • Press [AUDIO] to select the audio. (> 23, 40) Cannot change audio channel. • You cannot change the audio channel if “Digital Audio Output” is set to “Bitstream” (> 72) Cannot record. Cannot copy. • Some broadcasts are copyright protected. • You cannot record to the disc by pressing the [REC ¥] or timer recording. • The disc is protected. (> 77) • [DVD-R] [DVD-RW] [+R] [+RW] Since it will copy to HDD temporarily, copying is not possible if there is insufficient available capacity on the HDD. • This unit cannot record/copy NTSC signals to discs that already have PAL signal recordings. A part or whole of a recorded title has been lost. If there is a power failure or the AC mains lead is disconnected from the household mains socket while recording or editing, the title may be lost or the HDD may become unusable. We cannot offer any guarantee regarding lost programmes. An unusually loud sound is coming from the rotating disc. • If you want copy to perform more quietly, select “Normal ( Silent )” in “Disc Speed for High Speed Copy”. (> 71) The time recorded on the disc and the available time shown do not add up. • [DVD-R] [+R] If you record or edit many times, the remaining capacity is reduced and then recording or editing may be disabled. • Available disc space display may be different from actual. Sound Recording, timer recording and copying Timer recording does not work properly. • When is displayed on the screen. (> 33) • If your CAM requires a PIN for timer recording, you need to enter PIN in advance. (> 71, PIN Entry for Decrypt Recording) Auto Renewal Recording does not work properly. • The programme will not be overwritten in the following cases: - the programme is protected - any programme is being played back or copied - a screen such as Video Menu is displayed Instead, the programme will be saved as a separate programme and that will be overwritten.

• The disc is dirty. (> 10) • The disc is scratched or marked. • The disc may not be able to play back if it was not finalised or a Top Menu was not created on the equipment used for recording. • Refer to “Screen icons”. (> 35) Audio and video momentarily pause. • DVD-R DL and +R DL discs have two writable layers on one side. Video and audio may momentarily cut out when the unit is switching layers. Image for the Quick View is not smooth. • Image may not be played back smoothly in case of high definition titles. Cannot play the disc on other players. • Refer to “Play on other players”. (> 10) Cannot edit. • You may not be able to edit on the HDD if there is no available space. Delete any unwanted titles to create empty space. (> 42) Photos do not play back normally. • The images that were edited on the PC, such as Progressive JPEG, etc., may not play back. (> 8) This unit does not recognize the USB device correctly. • If inserted during playback the USB device may not be recognized by this unit. Disconnect and reconnect the USB device. If it still does not recognize the connection, switch the unit to standby mode and turn it on again. • USB devices connected using a USB extension cable other than a dedicated one or a USB hub may not be recognized by this unit. The TV Guide information is not displayed properly. • Set the clock correctly. (> 75, Clock) • There was a programme change, or TV Guide information from a broadcast station was possibly not correctly transmitted. • If signal quality is bad, the TV Guide system may not be able to receive any data. • It may take time until the TV Guide screen is displayed correctly. Wait for about a day. Play You have forgotten your rating PIN. • The rating level returns to the factory preset. 1 While the unit is on, press and hold [OK], the yellow button and the blue button at the same time for more than 5 seconds. • “00 RET” is displayed on the front panel display. 2 Repeatedly press [1] (right) until “03 VL” is displayed on the front panel display. 3 Press [OK]. • “INIT” is displayed on the front panel display. Edit Photo USB TV Guide

channels. • Adjust the reception with “Manual Tuning”. (> 67, 69) The channel which was once selectable cannot be selected. • Reveal the channel on the channel list. (> 67, 69) Digital broadcasts cannot be received. • To receive an encrypted broadcast, a CI module valid for the broadcast is required. [EX97S] • The dish may not be pointing in the direction of the satellite. If problem persists consult your local TV aerial installer. [EX97C] Major channels and favourite channels are not displayed on the top part of the channel list. • [DVB-C] To change channel allocation, restart Auto Setup in Basic Settings menu and change channel number allocation selection. (> 67) • You can change channel number assignment. (> 67) [EX97C] [DVB-T] [EX97S] Picture very infrequently breaks up on some or all channels. • Electrical atmospheric interference caused by bad weather may cause pictures to break up and audio to mute or distort momentarily. To return all the settings to the factory preset Perform “Shipping Condition” or “Default Settings”. (> 75) Broadcast Reset Language code list Abkhazian: 6566 Afar: 6565 Afrikaans: 6570 Albanian: 8381 Amharic: 6577 Arabic: 6582 Armenian: 7289 Assamese: 6583 Aymara: 6589 Azerbaijani: 6590 Bashkir: 6665 Basque: 6985 Bengali; Bangla: 6678 Bhutani: 6890 Bihari: 6672 Breton: 6682 Bulgarian: 6671 Burmese: 7789 Byelorussian: 6669 Cambodian: 7577 Catalan: 6765 Chinese: 9072 Corsican: 6779 Croatian: 7282 Czech: 6783 Danish: 6865 Dutch: 7876 English: 6978 Esperanto: 6979 Estonian: 6984 Faroese: 7079 Fiji: 7074 Finnish: 7073 French: 7082 Frisian: 7089 Galician: 7176 Georgian: 7565 German: 6869 Greek: 6976 Greenlandic: 7576 Guarani: 7178 Gujarati: 7185 Hausa: 7265 Hebrew: 7387 Hindi: 7273 Hungarian: 7285 Icelandic: 7383 Indonesian: 7378 Interlingua: 7365 Irish: 7165 Italian: 7384 Japanese: 7465 Javanese: 7487 Kannada: 7578 Kashmiri: 7583 Kazakh: 7575 Kirghiz: 7589 Korean: 7579 Kurdish: 7585 Laotian: 7679 Latin: 7665 Latvian, Lettish: 7686 Lingala: 7678 Lithuanian: 7684 Macedonian: 7775 Malagasy: 7771 Malay: 7783 Malayalam: 7776 Maltese: 7784 Maori: 7773 Marathi: 7782 Moldavian: 7779 Mongolian: 7778 Nauru: 7865 Nepali: 7869 Norwegian: 7879 Oriya: 7982 Pashto, Pushto: 8083 Persian: 7065 Polish: 8076 Portuguese: 8084 Punjabi: 8065 Quechua: 8185 Rhaeto-Romance: 8277 Romanian: 8279 Russian: 8285 Samoan: 8377 Sanskrit: 8365 Scots Gaelic: 7168 Serbian: 8382 Serbo-Croatian: 8372 Shona: 8378 Sindhi: 8368 Singhalese: 8373 Slovak: 8375 Slovenian: 8376 Somali: 8379 Spanish: 6983 Sundanese: 8385 Swahili: 8387 Swedish: 8386 Tagalog: 8476 Tajik: 8471 Tamil: 8465 Tatar: 8484 Telugu: 8469 Thai: 8472 Tibetan: 6679 Tigrinya: 8473 Tonga: 8479 Turkish: 8482 Turkmen: 8475 Twi: 8487 Ukrainian: 8575 Urdu: 8582 Uzbek: 8590 Vietnamese: 8673 Volapük: 8679 Welsh: 6789 Wolof: 8779 Xhosa: 8872 Yiddish: 7473 Yoruba: 8979 Zulu: 9085

appear on the front panel display when something unusual is detected. CAM is being updated. (> 76) Selected titles in the USB HDD are being converted. Do not disconnect the USB HDD from this unit. The remote control and main unit are using different codes. Change the code on the remote control. (> 80) TV Guide data is being downloaded. If there is no change after switching the unit to standby mode and turning it on, consult the dealer. You cannot delete items on this disc. The disc may be damaged. • The disc is dirty. (> 10) The unit cannot record, play, or edit. • The lens cleaner has finished cleaning. Press [< OPEN/CLOSE] on the main unit to eject the disc. You cannot write to this disc. The disc may be damaged. Use a new disc. • Displayed when the unit is started and is switched to standby mode. • There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying out its recovery process. Wait until the message disappears. There are already 32 timer programmes. Delete unnecessary timer programmes. (> 33) The USB device is drawing too much power. Remove the USB device. Update of the software (firmware) is started. You cannot operate the unit until the update is complete. (> 76) Software (firmware) is downloading. Download will stop when the unit is turned on, or the timer recording starts. (> 76) The media is not supported. Messages on the front panel display CAM-UP CONV DVD  (“∑” stands for a number.) GUIDE HARD ERR NoERAS NoREAD NoWRIT PLEASE WAIT PROG FULL REMOVE START SW-DL UNSUPPORT

You cannot operate the unit until the update is complete. (> 76) The unit is hot. The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears. Install or place this unit with good ventilation. (When a disc is not inserted) A malfunction has occurred. The unit is trying to restore to the normal operation. Once the message disappears you can use the unit again. If it remains displayed, consult the dealer. HDMI cannot be output because it is connected to a model that does not support copyright protection. Due to the current disc not having authorised copyright information, video output is not performed. (When a disc is inserted) There was something unusual detected with the disc or the unit. The unit is trying to restore to the normal operation. Once the message disappears you can use the unit again. If it remains displayed, consult the dealer. The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Now press [Í/I] on the main unit again to turn the unit on. The HOLD function is activated. (> 78) There is something unusual. (The service number displayed after H and F depends on the unit’s condition.) Reset the unit as follows: 1 Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it. 2 Press [Í/I] to turn the power on. (The unit may be fixed.) Request service from the dealer. Inform the dealer of the service number when requesting service. UPD / (“∑” stands for a number.) U59 U61 U76 U77 U88 U99 X HOLD H or F (“∑” stands for a number.)

notice. ∫General Dimensions: 430 mm (W) 59 mm (H) (including the projecting parts) 210 mm (D) Mass: Approx. 2.2 kg Power supply: AC 220 V to 240 V, 50 Hz Power consumption: [EX97C] Approx. 21 W [EX97S] Approx. 30 W “Quick Start” is not activated and “RF OUT ( Aerial Signal )” is set to “Off” [EX97C] Approx. 0.2 W “Quick Start” is not activated [EX97S] Approx. 0.2 W Operating temperature: 5 oC to 40 oC Operating humidity range: 10 % to 80 % RH (no condensation) ∫TV system [EX97C] Tuner System: DVB-C/DVB-T Country: Germany, Austria, Switzerland Channel coverage: VHF: 5 - 12 UHF: 21 - 69 CATV:S1 - S20 (M1 - U10) 7 MHz Band D051 - D073 D113 - D858 [EX97S] Tuner System: DVB-S/DVB-S2 Antenna receive frequency: 950 MHz to 2150 MHz Input impedance: Nominal 75 ≠ Demodulation: QPSK, 8PSK LNB input: F shape terminal female, power supply 13 V/18 V max. 400 mA DiSEqC: Version 1.0 or Tone burst A/B, 22 kHz 0.65 Vp-p ∫HDMI terminal HDMI out (19 pin type A): 1 pc. ∫Internal HDD capacity 500 GB ∫Other terminals USB Port (Type A): USB2.0 1 pc. Common Interface slot: 1 pc. ∫LASER specification Class 1 LASER Product Wave length: 661 nm (DVDs) 783 nm (CDs) Laser power: No hazardous radiation is emitted with the safety protection

recording time may become shorter than indicated. ∫DR mode ∫HG, HX, HE, HL, HM modes ∫XP, SP, LP, EP modes The audio output differs depending on the setting on this unit. (> 72, Digital Audio Output) • The number of channels listed is the maximum possible number of output channels when connected to amplifier/receiver compatible with the respective audio format. § The maximum possible number of Dolby® sound is 2ch PCM. Recording modes and approximate recording times Recording Mode HDD (500 GB) DR (HD quality) 75 hours DR (SD quality) 211 hours • Recording time of DR mode may vary depending on the bit rate of broadcasting: • High Definition (HD) quality: estimated bit rate is 14 Mbps • Standard Definition (SD) quality: estimated bit rate is 5 Mbps • Regarding recording time remaining: Remaining time in the DR mode is calculated with a bit rate of 14 Mbps. But the bit rate differs depending on the broadcast, so the displayed remaining time might be different from the actual remaining time. Recording Mode HDD (500 GB) HG 78 hours HX 117 hours HE 176 hours HL 235 hours HM 341 hours Recording Mode HDD (500 GB) XP 107 hours SP 215 hours LP 430 hours EP 860 hours Recording Mode DVD-RAM DVD-R, DVD-RW, +R, +RW (4.7 GB) DVD-R DL, +R DL (8.5 GB) Single- sided (4.7 GB) Double- sided (9.4 GB) XP 1 hour 2 hours 1 hour 1 hour 45 min. SP 2 hours 4 hours 2 hours 3 hours 35 min. LP 4 hours 8 hours 4 hours 7 hours 10 min. EP 8 hours 16 hours 8 hours 14 hours 20 min. • Regarding recording time remaining: This unit records using a VBR (Variable bit rate) data compression system to vary recorded data segments to match video data segments which may cause differences in the displayed amount of time and space remaining for recording. Audio information Terminal Digital Audio Output Bitstream PCM§ HDMI AV OUT Output using original audio 5.1ch PCM

Sony Corporation. DVB and the DVB logos are trademarks of the DVB Project. DiSEqCTM is a trademark of EUTELSAT. The “CI Plus” Logo is a trademark of CI Plus LLP. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or (5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1. The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the Basic Settings menu. At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof. Contact Information: [email protected] The source code and the copyright notice are also available for free in our website below. http://panasonic.net/avc/oss/ Vorbis, FLAC The software licenses are displayed when “Software Licence” in the Basic Settings menu is selected. (> 75)

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 40, 88 Auto Setup [EX97C] . . . . . . . . . . . . . . . . . . 20, 67 Auto Setup [EX97S] . . . . . . . . . . . . . . . . . . 21, 69 AVCHD . . . . . . . . . . . . . . . . . . . . . 34, 37, 53, 60 B Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . 66 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 DVB Tuning [EX97C] . . . . . . . . . . . . . . . . . . . . 66 DVB Tuning [EX97S] . . . . . . . . . . . . . . . . . . . . 69 Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 C CAM (Conditional Access Module) . . . . 14, 76 Channel information . . . . . . . . . . . . . . . . . . . 23 Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Channel List [EX97C] . . . . . . . . . . . . . . . . . . . . 67 Channel List [EX97S] . . . . . . . . . . . . . . . . . . . . 69 Chapter . . . . . . . . . . . . . . . . . . . . . 36, 39, 45, 71 Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 DVD-Video Parental Control . . . . . . . . . . . . . 70 HOLD function . . . . . . . . . . . . . . . . . . . . . . . . 78 CI Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 76 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Common Interface . . . . . . . . . . . . . . . . . . 14, 73 Connection [EX97C] . . . . . . . . . . . . . . . . . . . . . 16 Connection [EX97S] . . . . . . . . . . . . . . . . . . . . . 17 Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 AVCHD . . . . . . . . . . . . . . . . . . . . . . . . . . 53, 60 D Delete Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59, 71 Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 71 Video . . . . . . . . . . . . . . . . . . . . . . . . . 42, 71, 77 Disc Finalise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Media information . . . . . . . . . . . . . . . . . . . . . . 6 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 DVD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 E Easy setting [EX97C] . . . . . . . . . . . . . . . . . . . . 20 Easy setting [EX97S] . . . . . . . . . . . . . . . . . . . . 21 Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . 79 F Favourites [EX97C] . . . . . . . . . . . . . . . . . . . . . . 66 Favourites [EX97S] . . . . . . . . . . . . . . . . . . . . . . 69 Finalise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Format Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 USB HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 FUNCTION MENU . . . . . . . . . . . . . . . . . . . . . 22 H HDD Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Media information . . . . . . . . . . . . . . . . . . . . . . 6 L Language code list . . . . . . . . . . . . . . . . . . . . 84 Lens cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 11 M Manual Tuning [EX97C] . . . . . . . . . . . . . . . . . . 67 Manual Tuning [EX97S] . . . . . . . . . . . . . . . . . . 69 MKV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 P PAUSE LIVE TV . . . . . . . . . . . . . . . . . . . . . . . 26 Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 75 Playback menu . . . . . . . . . . . . . . . . . . . . . . . 64 Protection Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Q Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 R Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Timer recording . . . . . . . . . . . . . . . . . . . . . . . 29 Recording mode . . . . . . . . . . . . . . . . . . . . 9, 88 Recording time . . . . . . . . . . . . . . . . . . . . . . . 88 Remote control . . . . . . . . . . . . . . . . . . . . . . . 12 HOLD function . . . . . . . . . . . . . . . . . . . . . . . 78 Remote control code . . . . . . . . . . . . . . . . . . . 74 TV operation . . . . . . . . . . . . . . . . . . . . . . . . . 19 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 83, 84 REWIND LIVE TV . . . . . . . . . . . . . . . . . . . 26, 70

Auto Setup [EX97S] . . . . . . . . . . . . . . . . . 21, 69 Easy setting [EX97C] . . . . . . . . . . . . . . . . . . . . 20 Easy setting [EX97S] . . . . . . . . . . . . . . . . . . . . 21 Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Software (Firmware) Update . . . . . . . . . . . . . 76 T Timer recording . . . . . . . . . . . . . . . . . . . . . . . 29 Top Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Create Top Menu . . . . . . . . . . . . . . . . . . . . . 78 Troubleshooting guide . . . . . . . . . . . . . . . . . 80 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Tuning Channel List [EX97C] . . . . . . . . . . . . . . . . . . . . 67 Channel List [EX97S] . . . . . . . . . . . . . . . . . . . . 69 Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Manual Tuning [EX97C] . . . . . . . . . . . . . . . . . . 67 Manual Tuning [EX97S] . . . . . . . . . . . . . . . . . . 69 Signal condition [EX97C] . . . . . . . . . . . . . . . . . 68 Signal condition [EX97S] . . . . . . . . . . . . . . . . . 69 TV Guide Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Timer recording . . . . . . . . . . . . . . . . . . . . . . . 29 TV System . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 U USB HDD Cancellation of all USB HDD Registrations . . . . 71 Disconnection . . . . . . . . . . . . . . . . . . . . . 62, 71 Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Media information . . . . . . . . . . . . . . . . . . . . 6, 9 Registration . . . . . . . . . . . . . . . . . . . . . . . 62, 71 USB memories Media information . . . . . . . . . . . . . . . . . . . . 6, 9 V Video AVCHD . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 37 Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 DVD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . 37 MKV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Playback . . . . . . . . . . . . . . . . . . . . . . . . . 34, 37 Playlist created on other equipment . . . . . . . . . 37 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Video Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Xvid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 VIERA Link . . . . . . . . . . . . . . . . . . . . . . . . 63, 73 X Xvid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Note for the battery symbol (bottom symbol): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. [EX97C] [EX97S] (Inside of product) Manufactured by: Panasonic Corporation Kadoma, Osaka, Japan Importer for Europe: Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany EU Panasonic Corporation Web Site: http://www.panasonic.com © Panasonic Corporation 2015 p SQT0989 F0515TA0