Rangemaster 110 Ceramic User's Manual & Installation Instructions

best possible cooking performance and years of faithful service. However, a great cooker alone cannot guarantee perfect results every time. The other vital ingredients are of course enthusiasm and quality cookware. We offer cookware to work perfectly with all fuel types manufactured by Rangemaster, including induction hobs. You can be assured of functionality with style, as well as the quality and meticulous attention to detail you expect from the pioneers of range cooking. Visit: www.rangemastercookshop.co.uk Ingredients • Oil for greasing • 100 g strawberries • 100 g raspberries • 100 g redcurrants • 100 g blackberries • or a 400 g mixture of any soft fruits • 2 medium eggs • 30 g caster sugar • 80 ml skimmed milk • 2 tsp vanilla extract • 60 g plain flour (sifted) • 1 tsp baking powder • Icing sugar to dust Method 1. Preheat the oven to 200 °C (for a conventional oven), 180 oC (for a fan oven) or gas mark 6. 2. Lightly grease a dish 26 cm wide x 4 cm deep. 3. Thickly slice any large strawberries and place them with the other fruits into an ovenproof dish, deep enough so the berries are about 2 deep. 4. Whisk the eggs and caster sugar until pale and fluffy. Beat the milk and vanilla extract into the mixture and then fold in the sifted flour and baking powder. 5. Pour the cake mix over the fruit and bake on the centre shelf of the oven for 15-20 minutes, or until the mixture is cooked through and golden on the top. 6. Dust with icing sugar and serve immediately with cream or crème fraiche. FRUITY BAKED PUDDING Serves 4–6 Ingredients • 3 kg (6½ lb) skinned and boned loin of pork • 2 x 70 g packs prosciutto • Grated zest of 2 lemons • Bay leaves • Salt and freshly ground black pepper For the sauce: • 1 tablespoons plain flour • 4 tablespoons lemon juice • Chicken stock/water Method 1. Preheat the oven to 220 °C (for a conventional oven), 200 °C (for a fan oven) or gas mark 7. 2. Spread one of the packs of prosciutto over a chopping board; place the pork on top with the outer (fat) part of the pork resting on the prosciutto. 3. Sprinkle the lemon zest onto the inside of the meat and season well. Lay the remaining prosciutto on top of the zest and roll up. 4. Secure the pork with string or silicone bands and thread bay leaves under the string, covering the whole piece of pork. Put the meat on to a trivet over a large roasting tin containing enough water to cover the base. 5. Place into the oven and cook for 30 minutes. Reduce the heat to 180 °C conventional oven/160 °C fan oven/gas 4 and continue roasting for a further 25 minutes per 500 g. Should the prosciutto start becoming too brown, cover with some foil. 6. When the pork is cooked, place onto a warm plate, cover with foil and allow to rest for at least 20 minutes. 7. Spoon off most of the fat from the roasting tin and stir the flour into the remaining. Gradually add the stock and lemon juice, adding more stock until the desired consistency is reached and simmer for 5 minutes. Check the seasoning, adding more pepper or lemon juice as necessary. 8. Remove the string or bands from the pork and carve into slices, serve with the sauce. ROAST LOIN OF PORK WITH PROSCUITTO & BAY LEAVES

1 Installation and Maintenance 1 Peculiar smells 1 Ventilation 1 Personal Safety 1 Hob Care 2 Cooker Care 3 Cleaning 3 2. Cooker Overview 4 The Hob 4 The Grill / Glide-out Grill 6 The Ovens 7 The Clock 10 Main Oven Light 14 Storage 14 3. Cooking Tips 15 Tips on Cooking with the Timer 15 General Oven Tips 15 4. Cooking Table 16 5. Cleaning Your Cooker 17 Hob 17 Grills 18 Control Panel and Doors 18 Cleaning Table 20 6. Troubleshooting 21 7. Installation 23 Dear Installer 23 Safety Requirements and Regulations 23 Provision of Ventilation 23 Location of Cooker 23 Positioning the Cooker 24 Moving the Cooker 24 Repositioning the Cooker Following Connection 25 Levelling the Cooker 25 Electrical Connection 26 Final Checks 26 Final Fitting 27 Customer Care 27 8. Circuit Diagrams 28 9. Technical Data 34 Hotplate Efficiency Data 35 Oven Data 37

Although some of the illustrations will look different to your particular model the functions will be the same. We hope the meaning is clear. Your cooker should give you many years of trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used a ceramic cooker before. n n This appliance is designed for domestic cooking only. Using it for any other purpose could invalidate any warranty or liability claim. In particular, the oven should NOT be used for heating the kitchen – besides invalidating claims this wastes fuel and may overheat the control knobs. Installation and Maintenance In the UK the electrical installation should be in accordance with BS 7671. Otherwise, all installations must be in accordance with the relevant instructions in this booklet, with the relevant national and local regulations, and with the local electricity supply companies’ requirements. Set the clock to ensure that the ovens are functional – see the relevant section in this manual. It is recommended that this appliance is serviced annually. Only a qualified service engineer should service the cooker, and only approved spare parts should be used. Always allow the cooker to cool and then switch it off at the mains before cleaning or carrying out any maintenance work, unless specified otherwise in this guide. Peculiar smells When you first use your cooker it may give off a slight odour. This should stop after a little use. Before using for the first time, make sure that all packing materials have been removed and then, to dispel manufacturing odours, turn the ovens to 200°C and run for an hour. Before using the grill for the first time you should also turn on the grill and run for 30 minutes with the grill pan in position, pushed fully back, and the grill door open. Make sure the room is well ventilated to the outside air (see ‘Ventilation’ below). People with respiratory or allergy problems should vacate the area for this brief period. Ventilation The use of a cooking appliance results in the production of heat and moisture in the room in which it is installed. Therefore, ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a powered cooker hood that vents outside. If you have several hotplates on, or use the cooker for a long time, open a window or turn on an extractor fan. Personal Safety n n DO NOT modify this appliance. n n This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. n n Children or infirm persons should be supervised to ensure that they do not play with the appliance. n n DO NOT use a steam cleaner to clean the cooker. n n Accessible parts will become hot during use and will retain heat even after you have stopped cooking. Keep babies and children away from the cooker and never wear loose-fitting or hanging clothes while the appliance is in use. Always be certain that the controls are in the OFF position when the oven is not in use, and before attempting to clean the cooker. n n Take care when touching the marked cooking areas of the hob. n n When the oven is on, DO NOT leave the oven door open for longer than necessary, otherwise the control knobs may become very hot. n n When using the grill, make sure that the grill pan is in position and pushed fully in, otherwise the control knobs may become very hot. Always keep combustible materials, e.g. curtains, and flammable liquids a safe distance away from your cooker. n n DO NOT spray aerosols in the vicinity of the cooker while it is on. Use dry oven gloves when applicable – using damp gloves might result in steam burns when you touch a hot surface. Do not use a towel or other bulky cloth in place of a glove – it might catch fire if brought into contact with a hot surface. n n NEVER operate the cooker with wet hands. n n DO NOT use aluminium foil to cover shelves, linings or the oven roof. n n NEVER heat unopened food containers. Pressure build up may make the containers burst and cause injury. n n DO NOT use unstable saucepans. Always ensure that you position the handles away from the edge of the hotplate. n n Make sure to use adequately sized pans with flat bottoms that are large enough to cover the surface of the hotplate heating area. Using undersized pans will expose a portion of the hotplate surface to direct contact and may result in the ignition of clothing. 1. Before You Start...

ArtNo.312-0001 Not cooking surface Never leave the hotplate unattended at high heat settings. Pans boiling over can cause smoking, and greasy spills may catch on fire. Use a deep fat thermometer whenever possible to prevent fat overheating beyond the smoking point. n n NEVER leave a chip pan unattended. Always heat fat slowly, and watch as it heats. Deep fry pans should be only one third full of fat. Filling the pan too full of fat can cause spill over when food is added. If you use a combination of oils or fats in frying, stir them together before heating, or as the fats melt. Foods for frying should be as dry as possible. Frost on frozen foods or moisture on fresh foods can cause hot fat to bubble up and over the sides of the pan. Carefully watch for spills or overheating of foods when frying at high or medium high temperatures. Never try to move a pan of hot fat, especially a deep fat fryer. Wait until the fat is cool. Do not use the top of the flue (the slot along the back of the cooker) for warming plates, dishes, drying tea towels or softening butter. n n DO NOT use water on grease fires and never pick up a flaming pan. Turn off the controls and then smother a flaming pan on a surface unit by covering the pan completely with a well fitting lid or baking tray. If available, use a multipurpose dry chemical or foam-type fire extinguisher. Cooking high moisture content foods can create a ‘steam burst’ when the oven door is opened. When opening the oven stand well back and allow any steam to disperse (Fig. 1.1). Take care that no water seeps into the appliance. n n This appliance is heavy so take care when moving it. n n NEVER allow anyone to climb or stand on the hob. Hob Care n n NEVER cook directly on the hob surface (Fig. 1.2). n n DO NOT use the hob surface as a cutting board. Do not leave utensils, foodstuffs or combustible items on the hob when it is not is use (e.g. tea towels, frying pans containing oil). n n DO NOT place plastic or aluminium foil, or plastic containers, on the hob. n n DO NOT leave the hob zones switched on unless being used for cooking. Do not stand or rest heavy objects on the hob. Although the ceramic surface is very strong, a sharp blow or sharp falling object (e.g. a salt cellar) might cause the surface to crack or break (Fig. 1.3). n n Should a crack appear in the surface, disconnect the appliance immediately from the supply and arrange for its repair. ArtNo.312-0002 Salt cellar onto hob ArtNo.312-0003 Moving pans Fig. 1.1 Fig. 1.2 Fig. 1.3 Fig. 1.4

oven steam out the back Always LIFT pans off the hob. Sliding pans may cause marks and scratches (Fig. 1.4). Always turn the control to the OFF position before removing a pan. DO NOT place anything between the base of the pan and the hob surface (e.g. asbestos mats, aluminium foil, Wok stand). n n Avoid heating an empty pan. Doing so may damage both the hob and pan. Only certain types of glass, glass-ceramic, earthenware or other glazed containers are suitable for hob cooking; others may break because of the sudden change in temperature. Cooker Care As steam can condense to water droplets on the cool outer trim of the oven, it may be necessary during cooking to wipe away any moisture with a soft cloth. This will also help to prevent soiling and discolouration of the oven exterior by cooking vapours (Fig. 1.5). Cleaning n n DO NOT use abrasive cleaners/pads, oven aerosols/ pads or stain removers on the surface. In the interests of hygiene and safety, the cooker should be kept clean at all times as a build up in fats and other food stuff could result in a fire. Clean only the parts listed in this guide. We recommend that you avoid wiping any surface unit areas until they have cooled and the indicator light has gone off. Sugar spills are the exception to this (see ‘Cleaning your Cooker’). After cleaning, use a dry cloth or paper towel to remove any cleaning cream residue. The ceramic surface should be washed after use in order to prevent it from becoming scratched or dirty. However, you should clean the hob with caution as some cleaners can produce noxious fumes if applied to a hot surface. Clean with caution. If a wet sponge or cloth is used to wipe spills on a hot surface, be careful to avoid steam burns. Some cleansers can produce noxious fumes if applied to a hot surface. Fig. 1.5

A. Ceramic hob B. Control panel C. Separate grill or glide-out grill (depending on model) D. Conventional zoned oven, fan oven or multi-function oven (depending on model) E. Fan oven F. Storage drawer The Hob Use only pans that are suitable for ceramic hobs. We recommend stainless steel and enamelled steel pans as pots and pans with copper or aluminium bases leave traces on the hob that are difficult to remove. The kind of pan you use and the quantity of food affects the setting required. Higher settings are required for larger quantities of food. Pots and pans should have thick, smooth, flat bottoms (Fig. 2.2). This allows the maximum heat transfer from the hob to the pan, making cooking quick and energy efficient. Never use a round-bottomed wok, even with a stand. The very best pans have bases that are very slightly curved up when cold. If you hold a ruler across the bottom you will see a small gap in the middle (Fig. 2.3). When they heat up the metal expands and lies flat on the cooking surface. ArtNo.190-0001 - 110 Ceramic annotated GENERIC ºC M ºC A B C D E F DocNo.020-0002 - Overview - 90 Ceramic - Generic ArtNo.312-0006 Correct pan sizes 2. Cooker Overview Fig. 2.1 Fig. 2.2 Fig. 2.3 Fig. 2.4

Hob zone 1 2 3 1 2 3 ArtNo.312-0008 Ceramic hob labelled 1.1kW 1.56kW 1.1/0.2kW (dual purpose version) 0.11kW (warmer version) 2.02kW Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 1.65kW 1.1kW ArtNo.312-0007 Indicator light 110 Make sure that the base of the pan is clean and dry to prevent any residue burning onto the hob panel. This also helps prevent scratches and deposits. Always use pans that are the same size as (or slightly larger than) the areas marked on the hob top (Fig. 2.4). Using smaller pans wastes heat, and any spillage will be burnt on. Using a lid will help the contents boil more quickly. Always lift pans off the hob (Fig. 2.5). Sliding pans may cause marks and scratches. Always turn the control to the ‘OFF’ position before removing a pan. There are indicator lights for each of the cooking areas (Fig. 2.6). The lights come on when a hob control is turned on and stays lit while the surface cools. n n Always take care before touching the surface, even when the hob is turned off – it may be hotter than you think. The ratings of the different cooking areas are shown in (Fig. 2.6). When cooking on the hob, you may see the hob area you are using switch off and on: this is caused by a safety device that limits the temperature of the hob. This is quite normal, especially when cooking at high temperatures. If it happens a lot with a particular pan, however, it may mean the pan is not suitable – perhaps too small or too uneven – for a ceramic hob. Dual Element Hob Plates The areas marked with two concentric circles have an inner and an outer element. Rotate the control knob clockwise to heat the whole area for larger pans; turn it counter-clockwise to just heat the inner part for smaller pans (Fig. 2.7). Warmer (Rangemaster only) On the right of the hob is the warmer (Fig. 2.8). Use the warmer for keeping food warm while the final touches are put to a meal. Turn the control knob counter-clockwise to the on position. For best results, preheat a covered serving dish for 10 minutes before adding food to it. Use only heat resistant dishes. Dual Purpose Hob/Warmer Area (All models except Rangemaster) There is a dual purpose area on the right of the hob. The inner ring marks out a 1.2 kW hob area (Fig. 2.9). The outer line marks the extent of a warmer, which you can use for keeping food warm while the final touches are put to a meal. Turn the control to the first (warmer) position to heat the whole area to a low temperature. Turn it further to use the inner ring as a normal hob plate. ArtNo.312-0019 - Warmer plate Warmer plate Fig. 2.5 Fig. 2.6 Fig. 2.7 Fig. 2.8 Fig. 2.9

ArtNo.330-0003 - Grill pan w handle pulled forwards ArtNo.200-0003 - Generic grill control to full ArtNo.331-0001Grill pan pulled forwards The Grill / Glide-out Grill Open the door and pull the grill pan (Fig. 2.10) or carriage (Fig. 2.11) forward using the handle. The grill has two elements that allow either the whole area of the pan to be heated or just the right-hand half. Adjust the heat to suit by turning the control knob. To heat the whole grill, turn the knob clockwise (Fig. 2.12). To heat the right-hand half, turn the control knob counter- clockwise. The neon indicator light by the grill control will come on. For best results, leave the grill pan in the grill chamber and preheat the appropriate part(s) of the grill for two minutes. The grill trivet can be removed and the food placed on it while you are waiting for the grill to preheat. n n DO NOT leave the grill on for more than a few moments, without the grill pan underneath it, otherwise the knobs may become hot. Once the grill has preheated, take the grill pan out again and put the trivet back in place with the food on it. Slide the grill pan or carriage back into the grill chamber. Make sure that it is pushed right in. n n Accessible parts may be hot when the grill is in use. Young children should be kept away. The grill pan trivet can be turned over to give two grilling positions (Fig. 2.13). n n Never close the grill door when the grill is on. Fig. 2.10 Fig. 2.11 Fig. 2.12 Fig. 2.13

heat Fan oven A full cooking function, even heat throughout, great for baking Fanned grilling Grilling meat and fish with the door closed Fan assisted A full cooking function good for roasting and baking Conventional oven A full cooking function for roasting and baking in the lower half of the oven Browning element To brown and crisp cheese topped dishes Base heat To crisp up the bases of quiche, pizza or pastry Table 2.1 The Ovens The clock must be set to the time of day before the ovens will work. See the following section on ‘The Clock’ for instructions on setting the time of day. References to ‘left-hand’ and ‘right-hand’ ovens apply as viewed from the front of the appliance. The left-hand oven is either: • a conventional zoned oven • a fan oven or • a multi-function oven depending on model. The right-hand oven is a fan oven (Fig. 2.16). Conventional Zoned Ovens A conventional oven has two heating elements – one visible in the top of the oven and the other under the oven base. Note: Be careful to avoid touching the top element and element deflector when placing or removing items from the oven. Fan Ovens Fan ovens circulate hot air continuously, which means faster, more even cooking. The recommended cooking temperatures for a fan oven are generally lower than those for a non-fan oven. Multifunction Ovens Multi-function ovens have an oven fan and oven fan element, as well as two extra heating elements. One element is in the top of the oven and the second is under the oven base. Take care to avoid touching the top element and element deflector when placing or removing items from the oven. The multi-function oven has 3 main cooking functions, fan, fan assisted and conventional cooking. These functions should be used to complete most of your cooking. The browning element and base heat can be used in the latter part of the cooking process to fine tune the results to your particular requirements. Use fanned grilling for all your grilling needs and defrost to safely thaw small items of frozen food. Table 2.1 gives a summary of the multi-function modes. The multi-function oven has many varied uses. We suggest you keep a careful eye on your cooking until you are familiar with each function. Remember, not all functions will be suitable for all food types.

Rapid Response (Classic Deluxe only) The Rapid Response setting enables you to preheat the oven faster than normal. It uses the fan oven element with additional heat from one of the elements in the top of the oven. Fan ovens heat up quickly; but the Rapid Response feature speeds this process up enabling you to start cooking sooner. To use the Rapid Response feature, turn the function control knob to R and set the temperature required. The light on the control panel next to the function control will come on. When the required temperature is reached the top element will switch off and the light will go out. The oven temperature is then maintained by the fan oven element and fan. Should you choose to place food into the cold oven prior to cooking while using the Rapid Response function, make sure that cakes, etc. are not positioned too near the top of the oven. Fan Oven This function operates the fan and the heating element around it. An even heat is produced throughout the oven, allowing you to cook large amounts quickly. Fan oven cooking is particularly suitable for baking on several shelves at one time and is a good ‘all-round’ function. It may be necessary to reduce the temperature by approximately 10 °C for recipes previously cooked in a conventional oven. If you wish to preheat the oven, wait until the indicator light has gone out before inserting the food. Fanned Grilling This function operates the fan whilst the top element is on. It produces a more even, less fierce heat than a conventional grill. For best results, place the food to be grilled, on a grid over a roasting tin, which should be smaller than a conventional grill pan. This allows greater air circulation. Thick pieces of meat or fish are ideal for grilling in this way, as the circulated air reduces the fierceness of the heat from the grill. The oven door should be kept closed while grilling is in progress, so saving energy. You will also find that the food needs to be watched and turned less than for normal grilling. Preheat this function before cooking. For best results we recommend that the grill pan is not located on the uppermost shelf. Fan Assisted Oven This function operates the fan, circulating air heated by the elements at the top and the base of the oven. The combination of fan and conventional cooking (top and base heat) makes this function ideal for cooking large items that need thorough cooking, such as a large meat roast. It is also possible to bake on two shelves at one time, although they will need to be swapped over during the cooking time, as the heat at the top of the oven is greater than at the base, when using this function. This is a fast intensive form of cooking; keep an eye on the food cooking until you have become accustomed to this function. Conventional Oven (Top and Base Heat) This function combines the heat from the top and base elements. It is particularly suitable for roasting and baking pastry, cakes and biscuits. Food cooked on the top shelf will brown and crisp faster than on the lower shelf, because the heat is greater at the top of the oven than at the base, as in ‘Fan Assisted Oven’ function. Similar items being cooked will need to be swapped around for even cooking. This means that foods requiring different temperatures can be cooked together, using the cooler zone in the lower half of the oven and hotter area to the top. The exposed top element may cook some foods too quickly, so we recommend that the food be positioned in the lower half of the oven to cook. The oven temperature may also need to be lowered. Browning Element This function uses the element in the top of the oven only. It is a useful function for the browning or finishing of pasta dishes, vegetables in sauce, shepherds pie and lasagne, the item to be browned being already hot before switching to the top element. Base Heat This function uses the base element only. It will crisp up your pizza or quiche base or finish off cooking the base of a pastry case on a lower shelf. It is also a gentle heat, good for slow cooking of casseroles in the middle of the oven or for plate warming. The Browning and Base Heat functions are useful additions to your oven, giving you flexibility to finish off items to perfection. Defrost This function operates the fan to circulate cold air only. Make sure the temperature control is at 0°C and that no heat is applied. This enables small items such as desserts, cream cakes and pieces of meat, fish and poultry to be defrosted. Defrosting in this way speeds up the process and protects the food from flies. Pieces of meat, fish and poultry should be placed on a shelf, over a tray to catch any drips. Be sure to wash the shelf and tray after defrosting. Defrost with the oven door closed. Large items, such as whole chickens and joints should not be defrosted in this way. We recommend this be carried out in a refrigerator. Defrosting should not be carried out in a warm oven or when an adjoining oven is in use or still warm. Make sure that dairy foods, meat and poultry are completely defrosted before cooking.

Conventional zoned ovens and fan ovens Turn the oven knob to the desired temperature (Fig. 2.14). The oven indicator light will glow until the oven has reached the temperature selected. It will then cycle on and off during cooking. Multifunction ovens The multi-function oven has two controls: a function selector and a temperature setting knob (Fig. 2.15). Turn the function selector control to a cooking function. Turn the oven temperature knob to the temperature required (Fig. 2.14). The oven heating light will glow until the oven has reached the temperature you selected. It will then cycle on and off during cooking. The Browning Element (conventional ovens) The browning element is positioned in the top of the left- hand oven. It can be used at the end of a normal cooking period to give extra browning to au gratin dishes or give a crisper finish to meat. After the normal cooking is finished turn the left-hand oven thermostat knob clockwise to the browning position, indicated by ( ) on the fascia panel. Only the browning element will operate when the thermostat is turned to this position. The top and base cooking elements will automatically switch off. Temperature control Function control Fig. 2.14 Fig. 2.15

D A B E C ArtNo.300-0005 2BC minute minder setting E A B ArtNo.300-0006 2BC minute minder setting 2 A B ArtNo.300-0006 2BC minute minder setting 2 D E C A B ArtNo.300-0005 2BC minute minder setting A B C The Clock You can use the clock to turn the left-hand oven on and off. Note: When using the timer functions, first set the clock as required before setting the oven temperature and selecting the oven function (multi-function ovens only). Setting 2-button LCD Clock The clock must be set to the time of day before the oven will work. 1. Once the cooker is connected and switched on, the display will start to flash. 2. To set the time, turn and hold the Timer (A) knob to the Clock (C) setting and at the same time turn the Adjusting (B) knob either clockwise or counter-clockwise (Fig. 2.16). 3. Once you have set the time release the Timer (A) knob. Setting the Minute Minder A Minute Minder (E) is a feature that can be set for a number of minutes and sounds an alarm once the specified amount of time has elapsed. 1. Turn the Timer (A) knob to the Minute Minder (E) setting (Fig. 2.17). 2. Turn the Adjusting (B) knob to set the amount of time required. e.g. 20 seconds (Fig. 2.18). 3. Turn the Timer (A) knob to the Manual (D) setting to see the current time and the ‘Bell’ symbol on the display (Fig. 2.19). Cancel the Timer Alarm Once the specified time has elapsed it will emit an alarm. There are two ways to cancel the alarm: 1. Turn the Adjusting (B) knob counter-clockwise or clockwise (Fig. 2.20). 2. Turn either the Timer (A) knob to the Clock (C) or to the Minute Minder (E) setting. Return to Manual (D) for normal cooking mode (Fig. 2.20). NOTE If the alarm is not manually switched off it will stop after approximately 2 minutes. • The ‘cook period’, which is the length of time you want the oven to cook for. • The ‘stop time’, which is the time of day you want the oven to stop cooking. A – Timer knob, B – Adjusting knob Fig. 2.16 Fig. 2.17 Fig. 2.18 Fig. 2.19 Fig. 2.20

Time of Day You have set the required temperature and function mode for the Multifunction Oven and you would like the Multifunction Oven to automatically stop. TOP TIP Make a note of the current time so you do not forget. 1. Turn the Timer (A) knob to the Stop Time (G) setting (Fig. 2.21). 2. Turn the Adjusting (B) knob clockwise, the display will show the current time of day (Fig. 2.21). 3. Continue to turn the Adjusting (B) knob to the amount of time required e.g. 1 minute. The display will show the current time plus the required length of time you have set (Fig. 2.22). 4. Turn the Timer (A) knob to the Auto (H) setting (Fig. 2.22). The display will show the current time, the Cooking symbol and the word ‘AUTO’ (Fig. 2.22). 5. Once the specified time has elapsed it will emit an alarm and the Multifunction Oven will stop working. The ‘Cooking’ symbol on the display will disappear and the word ‘AUTO’ will flash (Fig. 2.23). 6. When you return, turn the Timer (A) knob to the Manual (D) setting to return to manual cooking and reset the Multifunction Oven modes once cooking is complete (Fig. 2.23). 7. Once the specified time has elapsed it will emit an alarm. There are two ways to cancel the alarm refer to Cancel the Timer Alarm page 10: To Start and Stop the Multifunction Oven The Multifunction Oven allows you to automatically start and stop by a combination of the length of the cooking time and the stop time. Giving you the flexibilty to cook casseroles etc while you are out. You cannot set the actual start time. 1. Turn the Timer (A) knob to the Cook Time (F) setting. Turn the Adjusting (B) knob clockwise to set the length of the cooking time required e.g. 50 seconds (Fig. 2.24). 2. Turn the Timer (A) knob to the Stop Time (G) setting (Fig. 2.25). The display will show the current time of day plus the ‘cook time’ you just set. 3. Continue to turn the Adjusting (B) knob to the amount of time required e.g. 1 minute (Fig. 2.26). 4. Set the Multifunction Oven to the required cooking temperature and function mode. 5. Turn the Timer (A) knob to the Auto (H) setting (Fig. 2.26). If the display shows the current time and the word ‘AUTO’ the Multifunction Oven is set to turn on and off. 6. When the program starts the Multifunction Oven, the ‘Cooking’ symbol will appear on the display. Once the specified time has elapsed it will emit an alarm and the Multifunction Oven will stop working. The ‘Cooking’ ArtNo.301-0008 2BC Stopping the oven 2 H A B ArtNo.301-0007 2BC Stopping the oven 1 D A B ArtNo.301-0008 2BC Stopping the oven 2 G A B Fig. 2.21 Fig. 2.22 Fig. 2.23 ArtNo.301-0010 2BC Setting the cooking time A B F ArtNo.301-0008 2BC Stopping the oven 2 G A B ArtNo.301-0008 2BC Stopping the oven 2 H A B Fig. 2.24 Fig. 2.25 Fig. 2.26 ArtNo.301-0007 2BC Stopping the oven 1 D A B Fig. 2.27

‘AUTO’ will flash (Fig. 2.27). Setting the 6-button Clock The 6-button LCD clock is shown in Fig. 2.28. When the clock is first connected the display flashes ( 0.00 ) and (G) alternately. Press and hold both the [C] and [D] buttons down (Fig. 2.29). Now press the [+] button (or the [–] button) until the correct time shows. Do not forget that it is a 24-hour clock. If you need to reset the cooker, turn off the power supply and wait for a couple of minutes and start again. Setting the minute minder Press and hold the [C] button (Fig. 2.30), and then press the [+] button until the length of time you want to cook for is shown (Fig. 2.31). You can check the time remaining by pressing [C]. When the beeper sounds cancel it by pressing [C]. • The ‘cook period’, which is the length of time you want the oven to cook for. • The ‘stop time’, which is the time of day you want the oven to stop cooking. To stop the oven automatically Press and hold the Stop Time [E] button (Fig. 2.32) and then press the [+] button (or [–] button) until the required ‘stop time’ shows (Fig. 2.33). AUTO will show in the display. Once the ‘stop time’ is reached, the beeper sounds. To stop the beep turn the oven control knob to 0 first and then press [B] once; press [B] again to return to manual cooking. To start and stop the oven automatically Before you set the clock you must have two numbers clearly in mind – the ‘cook period’ and the ‘stop time’. Note: You cannot set a start time directly – this is set automatically by setting the ‘cook period’ and the ‘stop time’. Press and hold the [D] button (Fig. 2.34) and then press the [+] button (or [–] button) until the required ‘cook period’ shows (Fig. 2.35). Now press and hold the [E] button (Fig. 2.36) and then press the [+] button (or [–] button) until the required ‘stop time’ shows (Fig. 2.37). Release the buttons. AUTO will now show in the display. Set the oven to the required temperature. When cooking is finished the beeper will sound. Turn the oven knob to the OFF position first, and then press the [B] button once to stop the beep; press it again to return to manual cooking. If you are out, do not worry about the beeper going off, it stops after a while. When you return, turn the oven knob to 0 first, and then press [B] twice to return to manual cooking. ArtNo.302-0001 - 6-button clock ArtNo.302-0003 - 6BC minute minder setting 1 ArtNo.302-0004 - Minute minder setting 2 ArtNo.302-0005 - 6BC Stopping the oven 1 ArtNo.302-0002 - 6BC annotated A B C D E F A – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time, D – Manual, E & F – Time setting buttons ArtNo.302-0005a - 6BC Stopping the oven 1a ArtNo.302-0006 - 6BC setting the cook time ArtNo.302-0006 - 6BC setting the cook time ArtNo.302-0005 - 6BC Stopping the oven 1 ArtNo.302-0005a - 6BC Stopping the oven 1a Fig. 2.28 Fig. 2.29 Fig. 2.30 Fig. 2.32 Fig. 2.34 Fig. 2.36 Fig. 2.31 Fig. 2.33 Fig. 2.35 Fig. 2.37

ArtNo.302-0008 - Activating the key lock 1 ArtNo.302-0009 - Activating the key lock 2 ArtNo.302-0011 - 6BC Deactivating the key lock 1 ArtNo.302-0012 - Deactivating the key lock 2 AUTO is showing, you want to reset to manual cooking To return to manual cooking from any automatic setting, the ‘cook period’ must be cancelled. Press and hold the [E] button and then press the [­–] button until the display reads ( 0.00 ). Press the [B] button to return to manual cooking. Key Lock Activating the key lock will lock the left-hand oven and it will not come on. The right-hand oven can be operated as usual. To activate the key lock Make sure that the clock is in manual mode and cancel any active programs. Hold the Minute Minder [C] and Cook period [D] buttons. When ‘On’ appears on the display (Fig. 2.38) press the [+] button once. The key symbol [F] and ‘OF’ will now show on the display (Fig. 2.39). Release the buttons. The left-hand oven is now locked, as confirmed by the display showing the time of day alongside the key symbol (Fig. 2.40). To turn off the key lock Hold the Minute Minder [C] and Cook period [D] buttons. When ‘OF’ appears on the display (Fig. 2.41) press the [+] button once. The key symbol [F] will go out and ‘On’ will show on the display (Fig. 2.42). Release the buttons. After a few seconds the display will revert to show the time of day. The oven can now be used normally. Fig. 2.38 Fig. 2.39 Fig. 2.40 Fig. 2.41 Fig. 2.42

forward but can be easily removed and refitted. Pull the shelf forward until the back of the shelf is stopped by the shelf stop bumps in the oven sides (Fig. 2.44). Lift up the front of the shelf so the back of the shelf will pass under the shelf stop and then pull the shelf forward (Fig. 2.45). To refit the shelf, line up the shelf with a groove in the oven side and push the shelf back until the ends hit the shelf stop. Lift up the front so the shelf ends clear the shelf stops, and then lower the front so that the shelf is level and push it fully back (Fig. 2.46). The Handyrack (Main Oven) The Handyrack (Fig. 2.47) fits to the left-hand oven door only. Food cooking on it is easy to attend to, because it is accessible when the door is open. The maximum weight that can be held by the Handyrack is 5.5 kg (12 lb). It should only be used with the supplied roasting tin, which is designed to fit the Handyrack. Any other vessel could be unstable. It can be fitted at two different heights. One of the oven shelves must be removed and the other positioned to suit. When the Handyrack is used in its highest position, other dishes can be cooked on the bottom shelf position or base of the oven. When the Handyrack is used in its lowest position, other dishes can be cooked on the second shelf position or base of the oven. To fit the Handyrack, locate one side of it on the door bracket (Fig. 2.48). Then spring the other side out to clip it onto the other bracket (Fig. 2.49). Main Oven Light Press the button to turn the light on (Fig. 2.50). If the oven light fails, turn off the power supply before changing the bulb. See the ‘Troubleshooting’ section for details on how to change the bulb. Storage The bottom drawer is for storing oven trays and other cooking utensils. It can get very warm, so do not store anything in it that may melt or catch fire. Never store flammable materials in the drawer. This includes paper, plastic and cloth items, such as cookbooks, plastic ware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the appliance. n n Flammable materials may explode and result in fire or property damage. The drawer can be removed completely for cleaning, etc. ArtNo.320-0013 Removing the shelf 3 ArtNo.320-0011 Removing the shelf 1 ArtNo.320-0012 Removing the shelf 2 ArtNo.320-0014 Handyrack on LH door ArtNo.320-0015 Fitting the Handyack 1 ArtNo.320-0016 Fitting the handyrack 2 ArtNo.320-0017 Main oven light Fig. 2.43 Fig. 2.44 Fig. 2.46 Fig. 2.48 Fig. 2.45 Fig. 2.47 Fig. 2.49 Fig. 2.50

If you want to cook more than one dish, choose dishes that require approximately the same cooking time. However, dishes can be ‘slowed down’ slightly by using small containers and covering them with aluminium foil, or ‘speeded up’ slightly by cooking smaller quantities or placing them in larger containers. Very perishable foods such as pork or fish should be avoided if a long delay period is planned, especially in hot weather. n n DO NOT place warm food in the oven to be timed. n n DO NOT use a timed oven that is already warm. n n DO NOT use the timed oven if the adjoining oven is already warm. Whole poultry must be thoroughly defrosted before being placed in the oven. Check that meat and poultry are fully cooked before serving. Temperature (Gas Mark) Temperature (°C / °F) 1 140 / 275 2 150 / 300 3 160 / 325 4 175 / 350 5 190 / 375 6 205 / 400 7 220 / 425 8 230 / 450 Table 3-1 Temperature conversion table General Oven Tips The wire shelves should always be pushed firmly to the back of the oven. Baking trays with food cooking on them should be placed level with the front edge of the oven’s wire shelves. Other containers should be placed centrally. Keep all trays and containers away from the back of the oven, as overbrowning of the food may occur. For even browning, the maximum recommended size of a baking tray is 340 mm (13½”) by 340 mm (13½”). When the oven is on, do not leave the door open for longer than necessary, otherwise the knobs may get very hot. • Always leave a “finger’s width” between dishes on the same shelf. This allows the heat to circulate freely around them. • To reduce fat splashing when you add vegetables to hot fat around a roast, dry them thoroughly or brush lightly with cooking oil. • Where dishes may boil and spill over during cooking, place them on a baking tray. • The ‘Cook & Clean’ oven liners (see ‘Cleaning Your Cooker’) work better when fat splashes are avoided. Cover meat when cooking. • Sufficient heat rises out of the oven while cooking to warm plates in the grill compartment. • If you want to brown the base of a pastry dish, preheat the baking tray for 15 minutes before placing the dish in the centre of the tray. 3. Cooking Tips

ArtNo.050-0007 Oven shelf positions Oven Shelf Positions Top (T) Centre (C) Base (B) The oven control settings and cooking times given in the table below are intended to be used AS A GUIDE ONLY. Individual tastes may require the temperature to be altered to provide a preferred result. Food is cooked at lower temperature in a fan oven than in a conventional oven. When using recipes, reduce the fan oven temperature by 10 °C and the cooking time by 5-10 minutes. The temperature in the fan oven does not vary with height in the oven so you can use any shelf. Food Meat Beef (no bone) Lamb Pork Poultry Chicken Turkey Duck Casserole Yorkshire Pudding Cake Very rich fruit - Christmas, wedding, etc. Fruit 180 mm tin Fruit 230 mm tin Madeira 180 mm Small cakes Scones Victoria sandwich 180 mm tin 210 mm tin Desserts Shortcrust tarts Fruit pies Tartlets Puff pastry Meringues Baked egg custard Baked sponge pudding Milk pudding Bread Fish Fillet Whole Steak Approximate Cooking Time 30-35 minutes per 500g +30-35 minutes. 20-25 minutes per 500g +20-25 minutes. 30-35 minutes per 500g +30-35 minutes. 25-30 minutes per 500g +25-30 minutes. 35-40 minutes per 500g +35-40 minutes. 25-30 minutes per 500g +25-30 minutes. 20-25 minutes per 500g +20-25 minutes. 15-20 minutes per 500g +15-20 minutes. 20 minutes per 500g +20 minutes. 15 minutes per 500g +15 minutes. 25-30 minutes per 500g. 20 minutes per 500g. 2-4 hours according to recipe. Large tins 30-35 minutes; individual 10-20 minutes. 45-50 minutes per 500g of mixture. 2-2½ hours. Up to 3½ hours. 80-90 minutes. 15-25 minutes. 10-15 minutes. 20-30 minutes. 30-40 minutes. 20-30 minutes on a preheated tray. 35-45 minutes. 10-20 minutes according to size. 20-40 minutes according to size. 2-3 hours. 45-60 minutes. 40-45 minutes. 2 to 3 hours. 20-30 minutes. 15-20 minutes. 15-20 minutes per 500g. Steaks according to thickness. Conventional Oven Temperature °C (Shelf Position) 160 (C) 200 (C) 160 (C) 200 (C) 160 (C) 200 (C) 160 (C) 200 (C) 160 (C) 200 (C) 160 (C) 200 (C) 140-150 (C) 220 (C) 140 (C/B) 150 (C/B) 150 (C/B) 160 (C/B) 170 (C/B) 200 (C/B) 170 (C/B) 170 (C/B) 200 (C/B) 180 (C/B) 180 (C/B) 210 (C/B) 100 (C/B) 160 (C/B) 180 (C/B) 140-150 (C/B) 210 (C) Fanned Grilling 190 (C/B) 190 (C/B) 190 (C/B) Fan Oven Temperature °C 150 190 150 190 150 190 150 190 150 190 150 190 130-140 210 130 140 140 150 160 190 160 160 190 170 170 200 90 150 170 130-140 200 190 (C/B) 190 (C/B) 190 (C/B) Thoroughly thaw frozen joints before cooking. Meat may be roasted at 220°C (210°C for fan oven) and the cooking time adjusted accordingly. For stuffed and rolled meats, add approximately 10 minutes per 500g, or cook at 200°C (190°C) for 20 minutes then 160°C (150°C) for the remainder. For stuffed poultry, you could cook at 200°C (190°C) for 20 minutes then 160°C (150°C) for remainder. Do not forget to include the weight of the stuffing. For fresh or frozen prepacked poultry, follow instructions on the pack. Thoroughly thaw frozen poultry before cooking. Using the conventional oven: when two tier cooking leave at least one runner space between shelves. Position the baking tray with the front edge along the front of the oven shelf. ArtNo.050-0001 Gas cooking table Using the conventional oven: for even browning the maximum size of baking tray recommended is 340 mm x 340 mm. This ensures free heat circulation. If cooking a two tier load, the trays should be interchanged approximately halfway though the cooking time. Up to three tiers can be cooked in a fan oven at the same time but make sure to leave at least one runner space between each shelf being cooked on. T - Top; C - Centre; B - Base DocNo.031-0004 - Cooking table - electric & fan single cavity

cleaning. Then allow the cooker to cool. n n NEVER use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. n n DO NOT mix different cleaning products – they may react together with hazardous results. All parts of the cooker can be cleaned with hot soapy water – but take care that no surplus water seeps into the appliance. Remember to switch the electricity supply back on and reset the clock before re-using the cooker. Hob Daily Care First of all, be sure that all heat indicator lights are off and that the cooking surface is cool. Apply a small dab of ceramic cleaning cream in the centre of each area to be cleaned. Dampen a clean paper towel and work the cream onto the cooking surface. As a final step, wipe the cooking surface with a clean, dry paper towel. Cleaning Spills For spills and boil-overs that occur while cooking, turn off the unit and wipe the area surrounding the hot zone with a clean paper towel. If a spill (other than a sugary substance) is on the hot zone, do not clean until the unit has completely cooled down, and then follow the instructions below, ‘Cleaning Burned-on Spills’. If you accidentally melt anything on the surface, or if you spill foods with a high sugar content (preserves, tomato sauce, fruit juice, etc.), remove the spill IMMEDIATELY with a razor scraper, while the unit is still hot. IMPORTANT: Use an oven glove to protect your hand from potential burns. Scrape the major spill or melted material from the cooking zone and push into a cold area. Then, turn the unit ‘OFF’ and allow to cool before cleaning further. After the cooking surface cools down and the heat indicator lights go off, follow the ‘Daily Care’ procedure outlined above. Cleaning Burned-on Spills Make sure that the heat indicator lights are off and that the hob is cool. Remove the excess burned-on substance with a single-edged razor scraper. Hold the scraper at an angle of about 30° to the surface and then scrape off the burned-on matter (Fig. 5.1). Once you have removed as much as possible with the scraper, follow the ‘Daily Care’ procedure outlined above. ArtNo.312-0010 Cleaning; scraping the ceramic hob 5. Cleaning Your Cooker Fig. 5.1 DocNo.040-0004 - Cleaning - 110 ceramic GENERIC

After grilling meats or any foods that soil, leave to soak for a few minutes immediately after use. Stubborn particles may be removed from the trivet using a nylon brush. Alternatively, the grill pan can be washed in a dishwasher. n n Before you remove any of the grill parts for cleaning, make sure that they are cool, or use oven gloves. n n DO NOT use any abrasive substances. Removing the Glide-out Grill The glide-out grill pan can be easily removed for cleaning as follows: Remove the grill pan support frame by pulling the grill pan forward (Fig. 5.2). Lift the grill pan clear of the support frame. The support frame is held to the side rails by two clips on each side (Fig. 5.3). For each side, support the side rail with one hand and with the other hand lift the frame up and out of the side clips (Fig. 5.4). For safety, push the side rails back into the grill chamber. If you need to remove the side rails to allow cleaning of the grill chamber, you can unhook them from the grill chamber sides (Fig. 5.5) and wipe the sides clean with a soft cloth and mild detergent. n n DO NOT put the side runners in a dishwasher. Once you have finished, hook the side rails back onto the sides of the chamber. To refit the frame, pull the side rails forward and, for each side in turn, support the side rail and press the frame down into the side rails. Replace the grill pan. When refitting the grill pan, make sure that the wide rim is at the front (Fig. 5.6). Control Panel and Doors Avoid using any abrasive cleaners, including cream cleaners. For best results, use a liquid detergent. The same cleaner can also be used on the doors. Alternatively, use a soft cloth wrung out in clean hot soapy water. You can use the same method for cleaning the control panel and knobs. After cleaning, polish with a dry cloth. ArtNo.331-0001Grill pan pulled forwards ArtNo.331-0003 Grill frame out, no pan ArtNo.331-0004 Removing the grill frame ArtNo.331-0005 Removing the grill rail ArtNo.331-0006 Grill pan plan Fig. 5.2 Fig. 5.3 Fig. 5.4 Fig. 5.5 Fig. 5.6

Glass Fronted Door Panels (some models) The oven door front panels can be taken off so that the glass panels can be cleaned. Move the cooker forward to gain access to the sides (see the ‘Moving the Cooker’ section under ‘Installation’). Open the oven door slightly and remove the front panel fixing screws from the door sides, two each side (Fig. 5.7). Carefully lift off the outer door panel. The inside face of the glass panels can now be cleaned – take care not to disturb or wet the door insulation. Note: If the door is triple glazed then the inner two panels are fixed together and should not be separated. After cleaning, carefully refit the outer door panel and replace the side fixing screws. n n DO NOT use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Ovens The oven door front panels can be taken off so that the glass panels can be cleaned. Move the cooker forward to gain access to the sides (see the ‘Moving the Cooker’ section under ‘Installation’). ‘Cook & Clean’ Panels The ovens have side ‘Cook & Clean’ panels which have been coated with a special enamel that partly cleans itself. This does not stop all marks on the lining, but helps to reduce the amount of manual cleaning needed. These panels work better above 200 °C. If you do most of your cooking below this temperature, occasionally remove the panels and wipe with a lint free cloth and hot soapy water. The panels should then be dried and replaced and the oven heated at 200 °C for about one hour. This will make sure that the panels are working effectively. Removing the Panels to Clean the Enamel Interior Some of the lining panels can be removed for cleaning. If you wish to clean the enamel interior of the oven, you will need to remove the shelves before removing the ‘Cook & Clean’ panels. To remove the side panels, simply lift the panel and slide forwards. (Fig. 5.8). Once the panels have been removed, the oven enamel interior can be cleaned. DO NOT use steel wool, oven cleaning pads, or any other materials that will scratch the surface. Refit in the reverse order. Fig. 5.7 Fig. 5.8

electrical retailers as stated. For enamelled surfaces use a cleaner that is approved for use on vitreous enamel. Regular cleaning is recommended. For easier cleaning, wipe up any spillages immediately. Hotplate Part Finish Recommended Cleaning Method Hob top Enamel or stainless steel Hot soapy water, soft cloth. Any stubborn stains remove gently with a nylon scourer. Ceramic/Induction hob Toughened glass Hot soapy water; cream cleaner/scourer if necessary. Griddle plate (some models only) Non-stick surface Allow to cool. Wash in hot soapy water. Do not use abrasive cleaners/scourers. Dishwasher. Warming zone (some models only) Toughened glass Hot soapy water, cream cleaner/scourer if necessary. Outside of Cooker Part Finish Recommended Cleaning Method Door, door surround and storage drawer exterior Enamel or paint Hot soapy water, soft cloth. Any stubborn stains, remove gently with a liquid detergent. Stainless steel E-cloth (electrical retailers) or microfibre all-purpose cloth (supermarket). Sides and plinth Painted surface Hot soapy water, soft cloth. Splashback/rear grille Enamel or stainless steel Hot soapy water, soft cloth. Cream cleaner, with care, if necessary. Control panel Paint, enamel or stainless steel Warm soapy water. Do not use abrasive cleaners on lettering. Control knobs/handles & trims Plastic/chrome, copper or lacquered brass Warm soapy water, soft cloth. Brass Brass polish. Oven door glass/glass lid (some models only) Toughened glass Hot soapy water, cream cleaner/scourer if necessary. Oven and Grill Part Finish Recommended Cleaning Method Sides, floor & roof of oven NOT COOK & CLEAN OVEN PANELS (see below) Enamel Any proprietary oven cleaner that is suitable for enamel. CAUTION: CORROSIVE/CAUSTIC OVEN CLEANERS: FOLLOW MANUFACTURER’S INSTRUCTIONS. Do not allow contact with the oven elements. Cook & Clean oven panels (some models only) Special enamel that partly cleans itself This surface cleans itself at 200 °C and above, or the panels can be removed and washed with hot soapy water and a nylon brush. Oven shelves, Handyrack, grill trivet, Handygrill rack (some models only) Chrome An oven interior cleaner that is suitable for chrome. Soap filled pad. Dishwasher. Grill pan/meat tin (some models only) Enamel Hot soapy water. Soap filled pad. Dishwasher. Table 5.1

be carried out by unqualified persons. Do not try to repair the hob as this may result in injury and damage to the hob. Please arrange for repair by a suitably competent person. A crack has appeared in the hob surface Disconnect the cooker immediately from the power supply and arrange for its repair. Do not use the cooker until after the repair. My hob is scratched Always use the cleaning methods recommended in this guide, and ensure that the pan bottoms are smooth and clean. Marks from mineral deposits from water or food can be removed with a cleaning cream. However, tiny scratches are not removable but will become less visible in time as a result of cleaning. The oven fan is noisy The note of the oven fan may change as the oven heats up – this is perfectly normal. Grill not cooking properly Are you using the pan and trivet supplied with the cooker? Is the pan being used on the runners, not the floor of the compartment? Is the grill tray pushed back fully to the ‘back stop’ position? The knobs get hot when I use the oven or grill. Can I avoid this? Yes, this is caused by heat rising from the oven or the grill, and heating them up. Do not leave the oven door open. Make sure that the grill pan is pushed right back to the ‘back stop’ when grilling. Always grill with the grill compartment door open. If there is an installation problem and I don’t get my original installer to come back to fix it, who pays? You do. Service organisations will charge for their call- outs if they are correcting work carried out by your original installer. Therefore, it’s in your own interest to keep track of this installer so that you can contact them as required. Power failure In the event of a failure in the electrical supply, remember to reset the clock to ensure that the timed oven continues to operate. Food is cooking too slowly, too quickly, or burning Cooking times may differ from your previous oven. Check that you are using the recommended temperatures and shelf positions – see the oven cooking guide. Then adjust the settings according to your own individual tastes. The oven is not cooking evenly Do not use a baking tray with dimensions larger than those specified in the section on ‘General Oven Tips’. If you are cooking a large item, be prepared to turn it round during cooking. If two shelves are used, check that space has been left for the heat to circulate. When a baking tray is put into the oven, ensure that it is placed centrally on the shelf. Check that the door seal is not damaged and that the door catch is adjusted so that the door is held firmly against the seal. A dish of water when placed on the shelf should be the same depth all over. (For example, if it is deeper at the back, then the back of the cooker should be raised up or the front lowered.) If the cooker is not level, arrange for your supplier to level it for you. The timed oven is not coming on when turned on manually Is the power on? Is the clock illuminated? If not, there may be something wrong with the power supply. Is the cooker supply on at the isolator switch? Has the time of day been set? Is the key symbol [] showing in the display to signify that the oven is locked? See the ‘Clock’ section of the instructions for more information on the key lock feature. The timed oven is not coming on when automatic cooking Has the oven knob been left in the OFF position by mistake? Is the oven locked (see above)? Oven temperature getting hotter as the cooker gets older If turning the temperature down using the oven control knob has not worked, or has only worked for a short time, then you may need a new thermostat. This should be fitted by a service person. 6. Troubleshooting

The bulb has probably blown. You can buy a replacement bulb (which is not covered under the guarantee) from most electrical stores. Ask for an Edison screw fitting 15 W 230 V lamp, FOR OVENS (Fig. 6.1). It must be a special bulb, heat resistant to 300 °C. Before removing the existing bulb, turn off the power supply and make sure that the oven is cool. Open the oven door and remove the oven shelves. Locate the bulb cover and unscrew it by turning it counter-clockwise – it may be very stiff (Fig. 6.2). Taking care to protect your fingers with a glove in case the bulb should shatter, unscrew the old bulb. Screw in the new bulb clockwise and then screw the bulb cover back on. Turn on the electricity supply and check that the bulb now lights. The oven door is misaligned The bottom hinge of either oven door can be adjusted to alter the angle of the door (Fig. 6.3). Loosen the bottom hinge fixing screws and use the notch and a flat bladed screwdriver to move the position of the hinge to set the hinge position (Fig. 6.4). Retighten the hinge screws. ArtNo.324-0005 Oven light bulb ArtNo.320-0006 Oven door hinge adjustment 1 Effect of hinge adjustment – exagerrated for clarity ArtNo.320-0007 Oven door hinge adjustment 2 Centreline of hinge pin Oven door omitted for clarity Fig. 6.1 Fig. 6.2 Fig. 6.3 Fig. 6.4

23 Dear Installer Before you start your installation, please complete the details below, so that, if your customer has a problem relating to your installation, they will be able to contact you easily. Safety Requirements and Regulations n n This cooker must be installed in accordance with the relevant instructions in this booklet, with the relevant national and local regulations, and with the local electricity supply companies’ requirements. n n The appliance must be installed in accordance with the regulations in force and only in a well ventilated space. n n Read the instructions before installing or using this appliance. Provision of Ventilation This appliance is not connected to a combustion products evacuation device. Therefore, particular attention must be given to the relevant requirements regarding ventilation. All rooms require a window that can be opened, or equivalent, while some rooms require a permanent vent in addition to the window. Location of Cooker The cooker may be installed in a kitchen/kitchen diner but NOT in a room containing a bath or shower. This appliance is designed for domestic cooking only. Use for any other purpose could invalidate any warranty or liability claim. You will need the following equipment to complete the cooker installation satisfactorily: • Multimeter (for electrical checks). You will also need the following tools: 1. Steel tape measure 2. Cross-head screwdriver 3. Flat-bladed screwdriver 4. Spirit level 5. Pencil 6. Adjustable spanner 7. 3 mm and 4 mm Allen keys 8. 13 mm spanner or socket wrench Checking the parts: ArtNo.050-0011 - Installer information table Installer’s Name Appliance Serial Number Installer’s Telephone Number Installer’s Company Grill pan and trivet (standard model shown) Flat oven shelves ArtNo.330-0002 - Grill pan w handle Handyrack Roasting tin ArtNo.324-0003 Handyrack ArtNo.324-0004 Roasting tin Plinth (standard model shown) Splashback (Classic & Classic Deluxe) ArtNo.421-0002 - Splashback Allen Keys 7. Installation

24 ArtNo.110-0016 110 induction min positions above cooker 1100 mm min* ** 410 mm min 5 mm 5 mm ArtNo.110-0009 - 110 induction door clearances 130 mm min ArtNo.090-0028 - 90 cooker min spacing GENERIC ºC M ºC 75 mm min 75 mm min 650 mm min 905 mm min 930 mm max Positioning the Cooker Fig. 7.1 and Fig. 7.2 show the minimum recommended distance from the cooker to nearby surfaces. The cooker should not be placed on a base. The hotplate surround should be level with, or above, any adjacent work surface. A gap of 75 mm should be left between each side of the cooker ABOVE the hotplate level and any adjacent vertical surface. For non-combustible surfaces (such as unpainted metal or ceramic tiles), this can be reduced to 25 mm. A minimum space of 650 mm is required between the top of the hob and a horizontal combustible surface. *Any cookerhood should be installed in accordance with the hood manufacturer’s instructions. **Any splashback must be fitted in accordance with the manufacturers instructions. Allowance should be made for the additional height of the flue trim, which is fitted to the cooker hob. Surfaces of furniture and walls at the sides and rear of the appliance should be heat, splash and steam resistant. Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage and discolouration. We cannot accept responsibility for damage caused by normal use of the cooker to any material that de-laminates or discolours at temperatures less than 65 °C above room temperature. We recommend a gap of 1110 mm between units to allow for moving the cooker. Do not box the cooker in – it must be possible to move the cooker in and out for cleaning and servicing. If the cooker is near a corner of the kitchen, a clearance of 130 mm is required to allow the oven doors to open (Fig. 7.3). The actual opening of the doors is slightly less, but this allows for some protection of your hand as you open the door. Moving the Cooker n n On no account try and move the cooker while it is plugged into the electricity supply. n n The cooker is very heavy, so take great care. We recommend two people manoeuvre the cooker. Make sure that the floor covering is firmly fixed, or removed to prevent it being disturbed when moving the cooker around. To help you, there are two levelling rollers at the back and two screw-down levelling feet at the front. Remove the polystyrene base pack. From the front, tilt the cooker backwards and remove the front half of the polystyrene base (Fig. 7.4). Repeat from the back and remove the rear half of the polystyrene base. Fig. 7.1 Fig. 7.2 Fig. 7.3 Fig. 7.4

25 ArtNo.010-0004 Moving the cooker Lowering the Two Rear Rollers To adjust the height of the rear of the cooker, first fit a 13 mm spanner or socket wrench onto the hexagonal adjusting nut (Fig. 7.5). Rotate the nut – clockwise to raise – counter-clockwise to lower. Make 10 complete (360°) turns clockwise. Make sure you lower BOTH REAR ROLLERS. Completing the Move Unfold the rear edge of the cardboard base tray. Open the grill door and right-hand oven door so that you can get a good grip on the bottom of the fascia panel as you move the oven (Fig. 7.6). Carefully push the cooker backwards off the base tray. Remove the base tray. Position the cooker close to its final position, leaving just enough space to get behind it (Fig. 7.7). n n DO NOT use the door handles or control knobs to manoeuvre the cooker. Repositioning the Cooker Following Connection If you need to move the cooker once it has been connected, make sure it is switched off at the supply switch before gripping under the fascia panel and lifting the front of the cooker slightly (Fig. 7.6). Check behind the cooker to make sure that the electricity cable is not caught. As you progress, always make sure that the cable has sufficient slack to allow the cooker to move. When you replace the cooker, check behind it again once more to make sure that the electricity cable is not caught or trapped. Levelling the Cooker Place the cooker in its intended position. Take care not to twist it within the gap between the kitchen units, as otherwise, damage may occur to the cooker or units. There are two screw-down feet at the front and two levelling rollers at the rear, which can be used to adjust the height and level of the cooker. It is recommended that you use a spirit level on a shelf in one of the ovens to check for level. Fig. 7.5 Fig. 7.6 Fig. 7.7

26 ArtNo.130-0010 Electrical connections single-phase L N 230 V ac 50 Hz 10 mm² max 6 mm² max L1 N L3 L2 3N ac 230/400 V 50 Hz 6 mm² max 10 mm² max 6 mm² max Electrical Connection The cooker must be installed by a qualified electrician, in accordance with all relevant British Standards/Codes of Practice (in particular BS 7671), or with the relevant national and local regulations. Current Operated Earth Leakage Breakers The combined use of your induction cooker and other domestic appliances may cause nuisance tripping, so we recommend that the cooker is protected on an individual RCD (Residual Current Device) or RCBO (Residual Current Breaker with Overload). IF IN DOUBT, PLEASE CONSULT A SUITABLY QUALIFIED ELECTRICIAN. n n WARNING: THE APPLIANCE MUST BE EARTHED. Note: The cooker must be connected to the correct electrical supply as stated on the voltage label on the cooker, through a suitable cooker control unit incorporating a double-pole switch, having a contact separation of at least 3 mm in all poles. n n The cooker MUST NOT be connected to an ordinary domestic power point. Access to the mains terminal is gained by removing the electrical terminal cover box on the back panel. Connect the mains cable to the correct terminals for your electrical supply type (Fig. 7.8 and Fig. 7.9). Check that the links are correctly fitted and that the terminal screws are tight. Secure the mains cable using the cable clamp. Final Checks Hob Check Check each cooking zone in turn. Be sure to use pans of the correct size and material. Grill Check Turn on the grill control and check that the grill heats up. Oven Check Set the clock as described earlier, and then turn on the ovens. Check the oven fans start to turn and that the ovens heat up. Fig. 7.8 Fig. 7.9

27 ArtNo.350-0012 - Securing the plinth ArtNo.350-0010 - Fitting the plinth 1 (Kitchener) ArtNo.350-0011 - Fitting the plinth 2 (Kitchener) Outer plinth Outer plinth fxing screw Inner plinth ArtNo.215-0026 - Handle gaskets fixed ArtNo.215-0027 - Elan handle blanking plugs Art No 215-0028 - Handrail fascia fixings Final Fitting Fitting the Handles and Handrail (depending on model) Remove the 4 mm Allen screws from the doors (Fig. 7.10). Fit the door handles and secure using the 4 mm screws. n n The handles should be above the fixings. Elan only: Fit the plastic blanking plugs to the fixing holes (Fig. 7.11). Remove the 4 mm Allen screws from the top corners of the fascia (Fig. 7.12). Fit the front handrail in position and secure using the 4 mm screws. Fitting the 1-piece Plinth Loosen the three screws along the front bottom edge of the cooker. Hook the central keyhole over the central screw. Twist and fit each end keyhole over their respective screws. Tighten the fixing screws (Fig. 7.13). Fitting the 2-piece Plinth (Classic Deluxe only) Fit the inner plinth to the bottom front of the cooker using the 4 screws provided (Fig. 7.14). Fit the outer plinth (2 screws, 1 each end) to the inner plinth. The height of the outer plinth can be adjusted by sliding it up or down via the slotted hole (Fig. 7.15). Fitting the Splashback (optional) Position the splashback on the rear of the hotplate and secure with the screws supplied. Customer Care Installer: Please complete your details in this guide, inform the user how to operate the cooker and hand over the instructions. Thank you. Fig. 7.10 Fig. 7.11 Fig. 7.12 Fig. 7.13 Fig. 7.14 Fig. 7.15

Hob with warmer plate ArtNo.095-0003 - Circuit diagram - 90 induction ArtNo.082-0023 - 110 Ceramic (hob warmer only) - circuit diagram 2.02kW 1.1kW 1.56kW 1.1kW 1.65kW A br br g/y br br b b b br br b or b b b b b b b b or w w b r r r r br br br br r r r r br br br br r r br b br b b b b br br b br br b b br b br br b v br br bk r w bk/w b v b v br br w/y br br br w/y A B C D F To cooling fan J H H H H H H G Code Description A Left-hand end dual circuit hob energy regulator B Left-hand front hob energy regulator C Left-hand rear hob energy regulator D Right-hand rear hob energy regulator F Right-hand front hob dual energy regulator G Right-hand warmer hob controller H Hob neons J Warmer Connections shown in the circuit diagram are for single -phase. Ratings are for 230 V 50 Hz. Code Colour b Blue br Brown bk Black or Orange r Red v Violet w White y Yellow g/y Green/yellow gr Grey

ArtNo.082-0024 - 110 Ceramic (hob) - circuit diagram P1 P4 P3 P5 P6 P7 P8 1 3 5 6 7 8 2 1.1kW 2.02kW 1.1kW 1.56kW 1.1kW 1.65kW br br g/y br br b b b b b b br br br b br br br b b b br b b b b b b b br br br w w w/y w/y r y r w w b w/y b r r r r br br br br r r r r br br br br r r br b br b b b b br br b br br b b br b br br b v br br bk r w bk/w b v b v br br br y br br br br br A B C D F G J J H H H H H H To cooling fan Code Description A Left-hand end dual circuit hob energy regulator B Left-hand front hob energy regulator C Left-hand rear hob energy regulator D Right-hand rear hob energy regulator F Right-hand front hob dual energy regulator G Right-hand warmer hob controller H Hob neons J Dual purpose hob/warmer Connections shown in the circuit diagram are for single-phase. The ratings are for 230 V 50 Hz. Code Colour b Blue br Brown bk Black or Orange r Red v Violet w White y Yellow g/y Green/yellow gy Grey

ArtNo.082-0020 - 110 Ceramic (hob) - Classic DL circuit diagram P1 P4 P3 P5 P6 P7 P8 1 3 5 6 7 8 2 1.1kW 2.02kW 1.1kW 1.56kW 1.1kW 1.65kW br br g/y br br b b b b b b br br br br b br br br b b br b b b b b b b br br br w w w/y w/y r y w w b w/y b r r r r br br br br r r r r br br br br r r br b br b b b b br br b br br b b br b br br b v br br bk r w bk/w b v b v br br br y br br br br w r bk A B C D F G J J H H H H H H To cooling fan Code Description A Left-hand end dual circuit hob energy regulator B Left-hand front hob energy regulator C Left-hand rear hob energy regulator D Right-hand rear hob energy regulator F Right-hand front hob dual energy regulator G Right-hand warmer hob controller H Hob neons J Dual purpose hob/warmer Connections shown in the circuit diagram are for single-phase. The ratings are for 230 V 50 Hz. Code Colour b Blue br Brown bk Black or Orange r Red v Violet w White y Yellow g/y Green/yellow gy Grey

ArtNo.082-0025 - 110 Ceramic (oven) - Circuit diagram 2 3 4 1 P3 P2 P1 P4 1 2 P1 P2 P3 1 2 4 3 5 2 3 4 1 P3 P2 P1 P4 bk bk w or br bk br b br bk b br b br br br br br b bk b bk b b b br v v v w b or y y br br y y r y v v r r br br b r r r b b bk w w bk y br br br r b w y b y w br br br w b To terminal 2 on the warmer hob controller switch b br w br b b b b b v v w br br b w b b b br br br F2 G B5 D H K F1 F3 F4 J I B2 B1 B3 B4 A3 K A1 A2 K I J Code Description A1 Grill energy regulator A2 Grill front switch A3 Grill elements B1 Left-hand zoned oven thermostat B2 Left-hand oven thermostat front switch B3 Left-hand oven browning element (inner pair) B4 Left-hand oven top element (outer pair) B5 Left-hand oven base element D Clock Code Description F1 Right-hand oven thermostat F2 Right-hand oven thermostat front switch F3 Right-hand oven fan element F4 Right-hand oven fan G Cooling fan H Oven light switch I Oven light J Thermal cut-out K Neon Code Colour b Blue br Brown bk Black or Orange r Red v Violet w White y Yellow g/y Green/yellow gy Grey

P033458 2 3 4 1 P3 P2 P1 P4 P033458 2 3 4 1 P3 P2 P1 P4 P028728 6 P6 5 P5 4 P4 7 P7 8 P8 2 P2 1 P1 3 P3 L N E w w or bk b br bk b br bk br br b b b b b br v v v w b y y br br y y y v r br br br b b r r b b bk w b r w gy r gy w bk or y br br br b b br To terminal P6 on the warmer hob controller switch br v b b y y b br br br br b b b b b r br br br br b bk gy v bk bk r br bk b or b or A2 A1 B1 A3 B3 B4 B2 B5 B6 B7 I D F1 G K I H E F2 F3 F4 K K K J J J Code Description A1 Grill energy regulator A2 Grill elements A3 Grill front switch B1 Left-hand multi-function oven thermostat B2 Left-hand multi-function oven control B3 Left-hand multi-function oven base element B4 Left-hand multi-function oven top element (outer pair) B5 Left-hand multi-function oven browning element (inner pair) B6 Left-hand multi-function oven fan element B7 Left-hand multi-function oven fan Code Description D Clock F1 Right-hand oven thermostat F2 Right-hand oven front switch F3 Right-hand oven element F4 Right-hand oven fan G Cooling fan H Light switch I Oven light J Thermal cut -out K Neon Multifunction Oven Elan Code Colour b Blue br Brown bk Black or Orange r Red v Violet w White y Yellow g/y Green/yellow gy Grey

6 P6 5 P5 4 P4 7 P7 8 P8 2 P2 1 P1 3 P3 2 3 4 1 P3 P2 P1 P4 P033458 2 3 4 1 P3 P2 P1 P4 P033458 P038434 L N E br br bk b w or br bk b br bk bk b b b bk b br br br br b br b b b bk b b b b b b bk v v v w b y or y br br y y y y v v r r br br br b r r b bk w b v r v r w r gr w bk or or y br br b b br To terminal P6 on the warmer hob controller switch br v b b br br br or w y b b b r or b b b br w b b gr w v bk bk b A2 A1 B1 A3 B2a B4 B2 B5 B6 B7 F2 I F3 F4 K J I H F1 K K D B3 J J K G Multifunction Oven Classic Deluxe The connections shown in the circuit diagram are for single-phase. The ratings are for 230 V 50 Hz. Code Description A1 Grill energy regulator A2 Grill elements A3 Grill front switch B1 Left-hand multi-function oven thermostat B2 Left-hand multi -function oven control B2a Left-hand multi-function oven thermostat front switch B3 Left-hand multi-function oven base element B4 Left-hand multi-function oven top element (outer pair) B5 Left-hand multi-function oven browning element (inner pair) B6 Left-hand multi-function oven fan element B7 Left-hand multi-function oven fan Code Description D Clock F1 Right-hand oven front switch F2 Right-hand oven thermostat F3 Right-hand oven element F4 Right-hand oven fan G Cooling fan H Light switch I Oven light J Thermal cut-out K Neon Code Colour b Blue br Brown bk Black or Orange r Red v Violet w White y Yellow g/y Green/yellow gy Grey

INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Back of the cooker, serial number repeater badge below oven door opening. COUNTRY OF DESTINATION: GB, IE. Connections Electric 230 / 400 V ~ 50 Hz 3N Dimensions Total height Min 905 mm Max 930 mm Total width 1100 mm Total depth: Classic 600 mm excluding handles, 650 mm including handles Total depth: Classic Deluxe 608 mm excluding handles, 670 mm including handles Total depth: Elan 615 mm excluding handles, 685 mm including handles Total depth: Kitchener 515 mm excluding handles, 663 mm including handles Total depth: Professional+ 604 mm excluding handles, 645 mm including handles Total depth: Rangemaster 600 mm excluding handles, 650 mm including handles Total depth: Toledo 605 mm excluding handles, 655 mm including handles Hotplate Ratings Hotplate energy saving tips Oven energy saving tips Use cookware with a flat base. Cook meals together, if possible. Use the correct size cookware. Keep the pre-heating time short. Use cookware with a lid. Do not lengthen cooking time. Minimise the amount of liquid or fat. Do not open the oven door during the cooking period. When liquid starts boiling, reduce the setting. Do not forget to turn the appliance off at the end of cooking. ArtNo.312-0008 Ceramic hob labelled 1.1kW 1.56kW 1.1/0.2kW (dual purpose version) 0.11kW (warmer version) 2.02kW Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 1.65kW 1.1kW

Classic, Classic Deluxe, Elan, Kitchener, Professional+ and Toledo Brand Rangemaster Model Identification Classic Classic Deluxe Elan Kitchener Professional+ Toledo Size 110 Type Ceramic Type of Hob Radiant Number of electric zones 6 Zone 1 - Ø cm 14.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 175 Zone 2 - Ø cm 14.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 180 Zone 3 - Ø cm 18.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 177 Zone 4 - Ø cm 14.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 180 Zone 5 - Ø cm 18.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 177 Zone 6 - Ø cm 14.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 180 Energy Consumption (ECElectric hob) - Wh/kg (*) 178 Information marked thus (*) is not required with mixed fuel hobs

Rangemaster Brand Rangemaster Model Identification Rangemaster Size 110 Type Ceramic Type of Hob Radiant Number of electric zones 6 Zone 1 - Ø cm 21.0 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 175 Zone 2 - Ø cm 14.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 180 Zone 3 - Ø cm 18.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 177 Zone 4 - Ø cm 14.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 180 Zone 5 - Ø cm 18.5 Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg 177 Zone 6 - Ø cm - Heating Technology - Energy Consumption (ECElectric cooking) - Wh/kg - Energy Consumption (ECElectric hob) - Wh/kg (*) 177 Information marked thus (*) is not required with mixed fuel hobs

Brand Rangemaster Model identification Classic Kitchener Professional+ Mass kg 117 Model identification Rangemaster Toledo Mass kg 112 Type of oven Electric Number of cavities 2 Left-hand Efficiency Fuel type Electric Cavity type Convection Power - conventional 2.2 Power - forced air convection - Volume Litres 80 Energy consumption (electricity) - conventional kWh / cycle 1.03 Energy consumption (electricity) - forced air convection kWh / cycle - Energy efficiency index - conventional 116.3 Energy efficiency index - forced air convection - Energy class B Right-hand Efficiency Fuel type Electric Cavity type Fanned Power - conventional - Power - forced air convection 2.5 Volume Litres 73 Energy consumption (electricity) - conventional kWh / cycle - Energy consumption (electricity) - forced air convection kWh / cycle 0.88 Energy efficiency index - conventional - Energy efficiency index - forced air convection 102.7 Energy class A Additional Information The oven complies with EN 60350-1 Maximum output @ 230V 50Hz Conventional 2.2 kW Multifunction 2.5 kW Multifunction (with Rapid Response) - Forced Air Convection 2.5 kW Grill 2.3 kW Slow Oven - Bread Proving Drawer - Maximum total electrical load at 230 V (approximate total including hob, oven lights, oven fan, etc.): 16.1 kW

Brand Rangemaster Model identification Classic Deluxe Mass kg 118 Model identification Elan Mass kg 125 Type of oven Electric Number of cavities 2 Left-hand Efficiency Fuel type Electric Cavity type Multifunction Power - conventional 2.2 Power - forced air convection 2.5 Volume Litres 73 Energy consumption (electricity) - conventional kWh / cycle 1.08 Energy consumption (electricity) - forced air convection kWh / cycle 0.91 Energy efficiency index - conventional 126.1 Energy efficiency index - forced air convection 106.2 Energy class A Right-hand Efficiency Fuel type Electric Cavity type Fanned Power - conventional - Power - forced air convection 2.5 Volume Litres 73 Energy consumption (electricity) - conventional kWh / cycle - Energy consumption (electricity) - forced air convection kWh / cycle 0.88 Energy efficiency index - conventional - Energy efficiency index - forced air convection 102.7 Energy class A Additional Information The oven complies with EN 60350-1 Maximum output @ 230V 50Hz Conventional 2.2 kW Multifunction 2.5 kW Multifunction (with Rapid Response) 3.7 kW Forced Air Convection 2.5 kW Grill 2.3 kW Slow Oven - Bread Proving Drawer - Maximum total electrical load at 230 V (approximate total including hob, oven lights, oven fan, etc.): Classic Deluxe (with Rapid Response) 17.1 kW Elan 16.1 kW

with your appliance once it has been installed, please telephone: 0800 804 6261 or depending on your mobile network tariff you can call free on 0370 789 5107. CONSUMER SERVICE LINES OPEN: Monday to Thursday 8am–6pm Friday 8am–5pm Saturday 9am–1pm WARRANTY Your manufacturer warranty covers goods of our own brand for defective workmanship and materials for a period of 1 year from the date of purchase. This warranty covers mechanical breakdown and proven cosmetic and manufacturing defects. You will receive an additional FREE full 12 months guarantee by registering your purchase using the FREEPOST form provided. Alternatively, call free on 0800 587 5747, quoting reference RMGX57A, or register online at www.rangemaster.co.uk. Any damage, blemishes or chips identified upon receipt of the product must be reported within 90 days. Proof of purchase may be required to establish validity. Scratches on the surface of ceramic hobs must be reported within 14 days. Scratches caused by usage are not covered. Accidental damage is not covered by the manufacturer’s warranty. For warranty compliance, the requirements for the appliance are: • Has been correctly installed in accordance with current legislation, relevant British and European Standards and Codes of Practice, by a suitably competent person registered with Gas Safe or equivalent body and where applicable a qualified electrician. • Has been used solely for domestic cooking purposes. • If in use in the UK*, has not been taken abroad as a personal export. In the Republic of Ireland, conditions may vary, so consult your retailer. • Is not second-hand or a refurbished appliance. The manufacturer’s warranty is not transferable. • Has not been subject to misuse, accidental damage or modification, and has not deteriorated due to normal domestic wear and tear, and the manufacturer’s recommendations concerning cleaning materials have been followed. • Has not been repaired by persons or organisations other than those authorised to act on behalf of AGA Rangemaster. Exceptions: • Items not included under the free 1 year warranty include pan supports, griddles, wok rings, baking trays, grill pans, trivets, filters, light bulbs and other consumable accessories. • Any damage caused other than through normal use. • Breakdowns associated with cooking spillage. • Cosmetic deterioration deemed to be normal wear and tear. • Please note that we reserve the right to charge additional payments for engineer’s expenses, at our discretion, up to the value of £300 per home visit. • The terms of this warranty are in addition to your legal rights and do not affect your legal rights in relation to defective products. Please contact Citizen’s Advice for more information relating to your legal rights. * Only certain models can be adapted for use with Mains Gas supplied in the Channel Islands and Isle of Man. OUT OF WARRANTY Service work should only be carried out by technically competent and suitably qualified personnel. For your own safety, always make sure that work is carried out by a Gas Safe registered engineer for gas appliances or an approved electrician for electrical models. For a competitive quote and to arrange for a Rangemaster approved engineer to attend, call Consumer Services on: 0800 804 6261 or depending on your mobile network tariff you can call free on 0370 789 5107. SPARE PARTS To maintain optimum and safe performance, we recommend that only genuine Rangemaster spare parts are used. These are available from most major spares stockists, including ourselves. STANDARDS Rangemaster cookers are designed and manufactured to a recognised international quality standard, which meets the requirements of BS EN ISO 9001, BS EN ISO 14001 and OHSAS 18001 for continually improving environmental procedures. Rangemaster cookers comply with the essential requirements of the appropriate European Directives, and carry the CE mark. Name of Appliance & Colour* Appliance Serial Number* Fuel Type* Natural Gas LP Gas Dual Fuel Electric Retailer’s Name & Address Date of Purchase Installer’s Name & Address Installer’s Telephone Number Date of Installation * This information is on the appliance data badge - look in the appliance instructions to find out where the data badge is located.

Clarence Street Royal Leamington Spa Warwickshire CV31 2AD England Tel: +44 (0) 1926 457400 Fax: +44 (0)1926 450526 E-mail: [email protected] Consumer Services Tel: +44 (0) 800 804 6261 www.rangemaster.co.uk For ROI Enquiries Tel: 1850 302 502 Registered in England and Wales. Registration No. 354715 Registered Office: Juno Drive, Leamington Spa, Warwickshire, CV31 3RG Search Rangemaster UK Rangemaster continuously seeks improvements in specification, design and production of products and thus, alterations take place peri- odically. Whilst every effort is made to produce up-to-date literature, this booklet should not be regarded as an infallible guide to current specification, nor does it constitute an offer for the sale of any particular appliance. ALSO PART OF THE RANGEMASTER COLLECTION... Refrigeration Built-in Cooking Dishwashing Sinks & Taps