Panasonic TX-P42VT30E Operating Instructions Manual

Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. English Model No. TX-P42VT30E TX-P50VT30E For more detailed instructions, refer to the Operating Instructions on the CD-ROM. To view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (Version 8.0 or later is recommended) installed on your computer. Depending on the operating system or settings on your computer, the Operating Instructions may not start automatically. In this case, open the PDF file under the “MANUAL” folder manually to view the instructions. Contents Be Sure to Read Safety Precautions······················································2 Maintenance ································································3 Quick Start Guide Accessories ···································································3 Identifying Controls ···················································6 Basic Connection ························································8 Auto Setup ··································································10 Using “VIERA Connect” ···········································14 How to Use VIERA TOOLS ······································14 Viewing 3D images ··················································15 How to Use Menu Functions ································21 Specifications ·····························································28

• Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) • Ensure that the mains plug is easily accessible. • Ensure the earth pin on the mains plug is securely connected to prevent electrical shock. • An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection. • Do not touch the mains plug with a wet hand. (This may cause electrical shock.) • Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.) • Do not move the TV with the lead plugged in the socket outlet. • Do not place a heavy object on the lead or place the lead near a high-temperature object. • Do not twist the lead, bend it excessively, or stretch it. • Do not pull on the lead. Hold onto the mains plug body when disconnecting lead. • Do not use a damaged mains plug or socket outlet. If you find any abnormality, remove the mains plug immediately! AC 220-240 V 50 / 60 Hz Power source • This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. Do not remove covers and NEVER modify the TV yourself • Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside. (High-voltage components may cause serious electrical shock.) • Have the TV checked, adjusted, or repaired at your local Panasonic dealer. Do not expose to direct sunlight and other sources of heat • Avoid exposing the TV to direct sunlight and other sources of heat. To prevent the spread of fire, keep candles or other open flames away from this product at all times Do not expose to rain or excessive moisture • To prevent damage which might result in electric shock or fire, do not expose this TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. Do not insert foreign objects into the TV • Do not allow any objects to drop into the TV through the air vents. (Fire or electrical shock may result.) Do not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base • The TV may fall off or tip over. Use only the dedicated pedestals / mounting equipment • Using an unapproved pedestal or other fixtures may make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup. • Use approved pedestals (p. 4) / wall-hanging brackets. Do not allow children to handle SD Card • As with any small object, SD Cards can be swallowed by young children. Please remove SD Card immediately after use and store out of reach of children. Caution When cleaning the TV, remove the mains plug • Cleaning an energized TV may cause electrical shock. Do not block the rear air vents • Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electrical shock.

3 When the TV is not going to be used for a long period of time, remove the mains plug • This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet. Transport only in upright position • Transporting the TV with its display panel facing upward or downward may cause damage to the internal circuitry. Allow sufficient space around the TV for radiated heat Minimum distance • When using the pedestal, keep the space between the bottom of the TV and the surface where the TV is set. • In case of using Wall-hanging bracket, follow the manual of it. 10 10 10 7 (cm) Do not expose your ears to excessive volume from the headphones • Irreversible damage can be caused. Do not apply strong force or impact to the display panel • This may cause damage resulting in injury. The TV is heavy. Handle the TV by 2 or more people. Support as shown to avoid injury by the TV tipping or falling. Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care : Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt : Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then wring the cloth and wipe the surface. Finally, wipe away all the moisture. Caution • Do not use a hard cloth or rub the surface too hard. This may cause scratches on the surface. • Take care not to subject the TV’s surfaces to water or detergent. A liquid inside the TV could lead to product failure. • Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade surface quality or cause peeling of the paint. • The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the surface with your fingernail or other hard objects. • Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may degrade surface quality. Mains plug Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock. Accessories Remote Control • N2QAYB000593 Batteries for the Remote Control (2) • R6 (p. 6) Pedestal (p. 4) Clamper (p. 8) Ferrite core (2) (Large size) (p. 9) Ferrite core (Small size) Use the Ferrite cores to comply with the EMC standard. Operating Instructions Pan European Guarantee Card

exclusive stand (p. 9) 3D Eyewear set (2) (p. 16) Terminal adaptors • Satellite adaptor (p. 8) • RF adaptor (p. 8, 9) • SCART adaptor (p. 8, 9) • COMPONENT adaptor • Composite adaptor • Audio adaptor • Optical digital audio adaptor • Accessories may not be placed all together. Take care not to throw them away unintentionally. • This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children. ■ Wireless LAN Adaptor Caution Be aware of the following limits before using the supplied Wireless LAN Adaptor. • To use the Wireless LAN Adaptor, an access point needs to be obtained. • Do not use the Wireless LAN Adaptor to connect to any wireless network (SSID∗) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access. ∗SSID is a name for identifying a particular wireless network for transmission. • Do not subject the Wireless LAN Adaptor to high temperatures, direct sunlight or moisture. • Do not bend, or subject the Wireless LAN Adaptor to strong impacts. • Do not disassemble or alter the Wireless LAN Adaptor in any way. • Do not attempt to install the Wireless LAN Adaptor in any incompatible device. • Do not remove the Wireless LAN Adaptor from the TV’s USB port during operations. • Data transmitted and received over radio waves may be intercepted and monitored. • To avoid malfunctions caused by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the Wireless LAN Adaptor. • When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV Off with Mains power On / Off switch, then turn it On again. • Depending on the area, this Wireless LAN Adaptor may not be available. • Additional information for Wireless LAN Adaptor and access point may be on the following web site. (English only) http://panasonic.jp/support/global/cs/tv/ Attaching / removing the pedestal Warning Do not disassemble or modify the pedestal. • Otherwise the TV may fall over and become damaged, and personal injury may result. Caution Do not use any pedestal other than the one provided with this TV. • Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. • If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened. • If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result. Ensure that the TV does not fall over. • If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result. Two or more people are required to install and remove the TV. • If two or more people are not present, the TV may be dropped, and personal injury may result. When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified procedure. (p. 5) • Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.

(silver) M5 × 20 D Pole • TBL5ZA3055 (TX-P42VT30E) • TBL5ZA3065 (TX-P50VT30E) E Base • TBL5ZX0063 (TX-P42VT30E) • TBL5ZX0067 (TX-P50VT30E) F Cover • TBL5ZB3045-1 (TX-P42VT30E) • TBL5ZB3054-1 (TX-P50VT30E) B Assembly screw (4) (black) M5 × 25 C Assembly screw (black) M4 × 8 1 Assembling the pedestal Use the assembly screws A to fasten the pole D to the base E securely. • Make sure that the screws are securely tightened. • Forcing the assembly screws the wrong way will strip the threads. 2 Securing the TV Use the assembly screws B to fasten securely. • Tighten the four assembly screws loosely at first, then tighten them firmly to fix securely. • Carry out the work on a horizontal and level surface. B E Hole for pedestal installation (View from the bottom) Arrow mark A E D Front Attach the cover F with assembly screw C F C Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Remove the assembly screws B from the TV. 2 Pull out the pedestal from the TV. 3 Remove the assembly screw C from the cover. 4 Pull out the cover. 5 Remove the assembly screws A from the pole. Adjusting the panel to your desired angle • Do not place any objects within the full rotation range. (View from the top) : 15° (TX-P42VT30E) : 10° (TX-P50VT30E)

• Switches TV On or Off standby 2 3D button • Switches to the viewing mode between 2D and 3D 3 [Main Menu] • Press to access Picture, Sound, Timer and Setup Menus 4 Aspect • Changes aspect ratio 5 Light • Lights the buttons (numeric, sound mute, last view, volume, channel) for about 5 seconds 6 [VIERA Link Menu] 7 Information • Displays channel and programme information 8 OK• Confirms selections and choices • Press after selecting channel positions to quickly change channel • Displays the Channel List 9 [Option Menu] • Easy optional setting for viewing, sound, etc. 10 Teletext • Switches to teletext mode 11 Subtitles • Displays subtitles 12 Numeric buttons • Changes channel and teletext pages • Sets characters • When in Standby mode, switches TV On (Press for about 1 second) 13 Sound Mute • Switches sound mute On or Off 14 Volume Up / Down 15 Input mode selection • TV - switches DVB-S / DVB-C / DVB-T / Analogue mode • AV - switches to AV input mode from Input Selection list 16 Direct TV Recording • Records programme immediately in DVD Recorder / VCR with Q-Link or VIERA Link connection 17 TV Guide 18 [VIERA Connect] • Displays VIERA Connect home screen 19 VIERA TOOLS • Displays some special feature icons and accesses easily 20 Exit• Returns to the normal viewing screen 21 Cursor buttons • Makes selections and adjustments 22 Return • Returns to the previous menu / page 23 Coloured buttons (red-green-yellow-blue) • Used for the selection, navigation and operation of various functions 24 Hold • Freeze / unfreeze picture • Holds the current teletext page (teletext mode) 25 Index • Returns to the teletext index page (teletext mode) 26 Last view • Switches to previously viewed channel or input mode 27 Channel Up / Down 28 Connected equipment operations ■ Installing / removing remote’s batteries 1 Pull open Hook Caution • Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. • Do not mix old and new batteries. • Do not mix different battery types (such as alkaline and manganese batteries). • Do not use rechargeable (Ni-Cd) batteries. • Do not burn or breakup batteries. Batteries must not be exposed to excessive heat such as sunshine, fire or the like. • Do not disassemble or modify the remote control. 2 Note the correct polarity (+ or -) Close

Many features available on this TV can be accessed via the On Screen Display menu. Operation guide Operation guide will help you to operate by using the remote control. Example : [Sound Menu] Main Menu Picture Sound Timer Setup 1/2 0 0 0 0 11 Mode Music Bass Treble Balance Headphone Volume Surround Auto Gain Control Volume Correction Speaker Distance to Wall Off Off Over 30cm Select EXIT Selects the basic sound mode. Page up Change RETURN Page down Operation guide How to use remote control Open the main menu Move the cursor / select the menu item / select from a range of options Move the cursor / adjust levels / select from a range of options Access the menu / store settings after adjustments have been made or options have been set Return to the previous menu Exit the menu system and return to the normal viewing screen Auto power standby function The TV will automatically go to Standby mode in the following conditions : • no signal is received and no operation is performed for 30 minutes in Analogue TV mode • [Off Timer] is active in the Timer Menu (p. 24) • no operation is performed for the period selected in [Auto Standby] (p. 24) • This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch Recording. 1 CI slot 2 SD Card slot 3 USB 3 port 4 HDMI1 - 4 terminal 5 Function select • [Volume] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ / [Balance] / [Auto Setup] ∗ [Music] or [Speech] mode in the Sound Menu 6 Channel Up / Down, Value change (when using the F button), Switching the TV On (press either button for about 1 second when in Standby mode) 7 Changes the input mode 8 Mains power On / Off switch • Use to switch the mains power. If you turned the TV Off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch. 9 Remote control signal receiver • Do not place any objects between the TV remote control signal receiver and remote control. 10 C.A.T.S. (Contrast Automatic Tracking System) sensor • Senses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On]  (p. 22) 11 Power and Timer LED • Red : Standby Green : On Orange : Timer Programming On Orange (flash) : Recording of Timer Programming, Direct TV Recording or One Touch Recording in progress Red with orange flash : Standby with Timer Programming On, Direct TV Recording or One Touch Recording • The LED blinks when the TV receives a command from the remote control. 12 Infrared transmitter for 3D Eyewear • Do not place any objects between the transmitter and 3D Eyewear.

Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. There are some restrictions on placement for viewing 3D images. For details  (p. 15, 20) Example 1 Connecting dish or aerial TV only To ensure your satellite dish is correctly installed, please consult your local dealer. • Also please consult the received satellite broadcasting companies for details. • For digital cable, digital terrestrial and analogue broadcasts Rear of the TV Terrestrial aerial AC 220-240 V 50 / 60 Hz Mains lead RF cable • For digital satellite broadcasts Satellite dish Satellite cable Cable Satellite adaptor (supplied) RF adaptor (supplied) ■ Clamper (Standard accessory / Attached with the mains lead) Attach the clamper Bundle the cables To remove from the TV : To loosen : hole Insert the clamper in a hole hooks Set the tip in the hooks Keep pushing both side snaps snaps knob Keep pushing the knob • Do not bundle the Satellite cable, RF cable and mains lead together (could cause distorted image). • Fix cables with clampers as necessary. • When using the optional accessory, follow the option’s assembly manual to fix cables. Example 2 Connecting DVD Recorder / VCR and Player TV, DVD Recorder / VCR and Player RF IN RF OUT Rear of the TV Cable Terrestrial aerial AC 220-240 V 50 / 60 Hz Mains lead RF cable RF adaptor (supplied) RF cable DVD Recorder or VCR Player / 3D-compatible player Fully wired SCART cable Fully wired HDMI compliant cable SCART adaptor (supplied)

TV, DVD Recorder / VCR and Set top box RF IN RF OUT Rear of the TV Terrestrial aerial Mains lead AC 220-240 V 50 / 60 Hz Fully wired HDMI compliant cable Fully wired SCART cable Fully wired SCART cable RF adaptor (supplied) SCART adaptor (supplied) Set top box DVD Recorder or VCR RF cable RF cable Cable ■ Connecting to the network environment (Network connections) To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment. • If you do not have any broadband network services, please consult your retailer for assistance. • Connect with LAN cable (Wired connection) or Wireless LAN Adaptor (Wireless connection). • Setup of the network connection will start after the tuning (when first using the TV)  (p. 11 - 13) Internet environment Internet environment Wired connection Wireless connection Access point LAN cable Wireless LAN Adaptor and exclusive stand (supplied) Rear of the TV Less than 10 cm Less than 10 cm Ferrite core - Large size (supplied) Installing the Ferrite core Pull back the tabs (in two places) Wind the cable twice Press the cable through and close • Insert the Wireless LAN Adaptor to the stand straightly and completely. • Connect to the USB 1 or 2 port. Note • To watch 3D contents  (p. 15) • Connect to the TV’s AV1 for a DVD Recorder / VCR supporting Q-Link. • For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable. • Please also read the manual of the equipment being connected. • Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

• These steps are not necessary if the setup has been completed by your local dealer. • Please complete connections (p. 8, 9) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. 1 Plug the TV into mains socket and switch On • Takes a few seconds to be displayed • If the red LED shows on the TV, press the Standby On / Off switch on the remote control for about 1 second. 2 Select the language Menüsprache Deutsch Dansk Polski Srpyski English Svenska čeština Hrvatski Français Norsk Magyar Slovenščina Italiano Suomi Slovenčina Latviešu Español Türkçe Български eesti keel Português Еλληνικά Română Lietuvių Nederlands select set 3 Select your country Country Germany Denmark Poland Austria Sweden Czech France Norway Hungary Italy Finland Slovakia Spain Luxembourg Slovenia Portugal Belgium Croatia Switzerland Netherlands Estonia Malta Turkey Lithuania Andorra Greece Others select set • Depending on the country you select, select your Region or store the Child Lock- PIN number (“0000” cannot be stored) by following the on screen instructions. 4 Select the mode you want to tune TV Signal Selection DVB-C DVB-S DVB-T Analogue Start Auto Setup tune / skip tuning select : tune (search for the available channels) : skip tuning 5 Select [Start Auto Setup] TV Signal Selection DVB-C DVB-S DVB-T Analogue Start Auto Setup access select • Auto Setup will start to search for TV channels and store them. The stored channels and sorted channel order vary depending on the country, area, broadcasting system and conditions of signal reception. Auto Setup screen varies depending on the country you select. 1 DVB-S Search Mode 2 DVB-S Satellite Search Search Mode Free Channels All Channels 0% 100% Astra 19.2°E Hot Bird 13°E Searching Satellite Press EXIT to skip Satellite installation Satellite DVB-S Auto Setup Satellite Checking LNB2 Progress This will take up to 40 minutes. set select mode

4 [DVB-C Network Settings] 0% 100% Astra 19.2° E 1 2 3 100 100 CBBC Channel BBC Radio Wales E4 100 Searching DVB-S Auto Setup Satellite Progress This will take about 30 minutes. No. Channel Name Type Free TV Free TV Free TV Quality Free TV: 3 Pay TV: 0 Radio: 0 • Depending on the country you select, select your cable provider beforehand by following the on screen instructions. Frequency Auto Network ID Start Auto Setup Auto DVB-C Network Settings access select [Start Auto Setup] Normally set [Frequency] and [Network ID] to [Auto]. If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider with numeric buttons. 5 [DVB-C Auto Setup] 6 [DVB-T Auto Setup] 0% 100% 1 2 3 100 100 CBBC Channel BBC Radio Wales E4 100 Searching DVB-C Auto Setup Progress This will take about 3 minutes. No. Channel Name Type Free TV Free TV Free TV Quality Free TV: 3 Pay TV: 0 Radio: 0 CH 5 69 62 62 62 100 100 CBBC Channel BBC Radio Wales E4 100 62 100 Cartoon Nwk Searching CH Channel Name Type Free TV Free TV Free TV Free TV Quality Free TV: 4 Pay TV: 0 Radio: 0 DVB-T Auto Setup Progress This will take about 3 minutes. • Depending on the country you select, the channel selection screen will be displayed after DVB-T Auto Setup if multiple channels have the same logical channel number. Select your preferred channel or exit the screen for automatic selections. 7 [Analogue Auto Setup] 8 Preset Download CH 29 CH 33 BBC1 CH 2 78 41 CC 1 Searching CH Channel Name Analogue: 2 Analogue Auto Setup Scan This will take about 3 minutes. If Q-Link, VIERA Link or similar technology compatible recorder is connected, channel, language, country / region settings are automatically downloaded to the recorder. 0% 100% Sending Preset Data Please wait! Remote control unavailable • If downloading has failed, you can download later through the Setup Menu.  [Download] (p. 25) 6 Setup the network connection Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 14). • To setup the wireless connection, use the Wireless LAN Adaptor (supplied).  (p. 4) Please note that this TV does not support wireless public access points. • Ensure the network connections (p. 9) and network environment are completed before starting setup. Select the network type Network Setup Select Wired or Wireless Wired Wireless Set later [Wired]  “Wired connection” (p. 9) [Wireless]  “Wireless connection” (p. 9) access select • To setup later on or skip this step Select [Set later] or ■ [Wired] 1. Select [Auto] Check network cable connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection. Connection Test : succeeded The test is successful and the TV is connected to the network. : failed Check the settings and connections. And then select [Retry]. Acquire IP Address Auto Manual access select Automatically setup is done and the test of the network connection starts. • To set manually, select [Manual] and set each item. 2. Go to the next step 7 (Press twice)

Connection Type Please select network connection type. Search for access point WPS(Push button) access select [Search for access point] Access points found automatically are listed. 1. Select your desired access point 1 2 3 Access Point A SSID Access Point B Access Point C 11n(2.4GHz) 11n(5GHz) 11n(5GHz) Available Access Points No. Wireless type Encrypt Reception access select : Encrypted access point • To search access points again (yellow) • For the information of the highlighted access point • To set manually (red) 2. Access the encryption key input mode SSID : Access Point A Encryption Key Setting Authentication type : WPA-PSK Encryption type : TKIP Please input the encryption key. Encryption key Connection will be made with the following settings:- • If the selected access point is not encrypted, the confirmation screen will be displayed. It is recommended to select the encrypted access point. 3. Enter the encryption key of the access point A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : # a b c d e f g h i j k l m n o p q r s t u v w x y z ( ) + - . * _ Access Point Settings Encryption key Set characters Store select set • You can set characters by using numeric buttons. 4. Select [Yes] No Access Point Settings Encryption key is set to:- XXXXXXXX Select 'Yes' to confirm. Select 'No' to change. Yes set select • To re-enter the encryption key, select [No]. • If the connection has failed, check the encryption key, settings and positions of your access point. And then, follow the on screen instructions. 5. After the access point setting is finished, perform the connection test Check access point connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection. Connection Test : succeeded The test is successful and the TV is connected to the network. : failed Check the settings and connections. And then select [Retry]. • To set manually, select [Manual] and set each item. 6. Go to the next step 7 (Press twice)

2. Connect the Wireless LAN Adaptor and the access point 1) Please press the ‘WPS’ button on the access point until its light flashes. 2) When the light is flashing select ‘Connect’ on TV. If you are unsure, please check the instruction manual of the access point. WPS(Push button) Connect • Ensure that your access point supports WPS for this setup. • WPS : Wi-Fi Protected Setup™ • If the connection has failed, check the settings and positions of your access point. And then, follow the on screen instructions. 3. After the access point setting is finished, perform the connection test Check access point connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection. Connection Test : succeeded The test is successful and the TV is connected to the network. : failed Check the settings and connections. And then select [Retry]. • To set manually, select [Manual] and set each item. 4. Go to the next step 7 (Press twice) 7 Select [Home] Select [Home] viewing environment to use in your home environment. Please select your viewing environment. Home Shop set select ■ [Shop] viewing environment (for shop display only) [Shop] viewing environment is the demonstration mode to explain main features of this TV. Select [Home] viewing environment to use in your home environment. • You can return to viewing environment selection screen at the stage of Shop confirmation screen and Automatic Demo Off / On selection screen. 1 Return to viewing environment selection screen 2 Select [Home] Please select your viewing environment. Home Shop set select Shop You have selected shop mode Automatic Demo Off On To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.  [Shipping Condition] (p. 27) Auto Setup is now complete and your TV is ready for viewing. If tuning has failed, check the connection of the satellite cable, RF cable, and then, follow the on screen instructions. • To retune all channels  [Auto Setup] (p. 25, 26) • To add the available TV mode later  [Add TV Signal] (p. 25, 26) • To initialise all settings  [Shipping Condition] (p. 27) Do not display a still picture for a long time This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty. Typical still images : • Channel number and other logos • Image displayed in 4:3 mode • Video game • Computer image To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed.

14 Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. • This TV has no full browser function and all features of websites may not be available. 1 Turn power on • Press for about 1 second • Mains power On / Off switch should be On (p. 7). Every time you turn on the TV, VIERA Connect introduction banner appears. The banner is subject to change. Enjoy selected internet content with VIERA Connect. Simply press the OK / INTERNET button 2 Access VIERA Connect While the banner is displayed • The button design varies depending on the remote control. or Example : Welcome to VIERA Connect™ VIERA Connect™ home screen is subject to change without notice. The services through VIERA Connect™ are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. All features of websites or content of the service may not be available. Some content may be inappropriate for some viewers. Some content may only be available for specific countries and may be presented in specific languages. ENTER Don’t show this message again • Depending on the usage conditions, it may take a while to read all the data. • Messages might be displayed before VIERA Connect home screen. Please read these instructions carefully and follow the on screen instructions. Example : VIERA Connect home screen MORE BACK • To go to the next level  [MORE] • To back to the previous level  [BACK] ■ To exit from VIERA Connect • To set the VIERA Connect instruction banner display off   [VIERA Connect Banner] (p. 27) How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. 1 Display icons of the feature 2 Select a feature VIERA Link Control access select 3 Follow the operations of each feature ■ To return to TV or

15 Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats. ∗1 : The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back ∗2, ∗3 : Other available 3D formats • How to use the 3D Eyewear (p. 16) • How to view the 3D images (p. 19) Danger Prohibition of Heating • Do not put 3D Eyewear in fire, heat it or leave it in places that can get hot. • 3D Eyewear contains a lithium-ion polymer rechargeable battery, so heating may result in combustion or rupture that may cause burns or fire. Warning Small Parts • 3D Eyewear contains small parts (ferrite core, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly • Do not disassemble or modify the 3D Eyewear. • When disposing this 3D Eyewear, refer “Disposal” (p. 18) and disassemble properly for removing the rechargeable battery. Charging • Charge by connecting the included charging cable to the USB port of this TV. Charging with other devices may result in battery leakage, heating or rupture. • Do not use the included charging cable for uses other than charging Caution To enjoy 3D images safely and comfortably, please read these instructions fully. 3D Eyewear • Do not drop, exert pressure on, or step on the 3D Eyewear. • Be careful of the tips of the frame when putting on the 3D Eyewear. • Always keep the 3D Eyewear in a cool, dry place. • Be careful not to trap a finger in the hinge section of the 3D Eyewear. Viewing 3D Content • Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing medical conditions. • Please stop using the 3D Eyewear immediately, if you feel tired, are not feeling well or experience any other uncomfortable sensation. • When you set the effect by using [3D Adjustment], take into account that the vision of 3D images varies among different individuals. • Take an appropriate break after viewing a 3D movie. • Take a break of between 30 - 60 minutes after viewing 3D content on interactive devices such as 3D games or computers. • Be careful not to strike the TV screen or other people unintentionally. When using the 3D Eyewear the distance between the user and screen can be misjudged. • The 3D Eyewear must only be worn when viewing 3D content. • If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be turned off automatically. • If you suffer from any eyesight problems (short / far-sighted, astigmatism, eyesight differences in left and right), please ensure to correct your vision before using the 3D Eyewear. • Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content. • Do not use the 3D Eyewear at a distance less than the recommended distance. The recommended viewing distance is at least 3 times of image height. TX-P42VT30E : 1.6 m or more TX-P50VT30E : 1.9 m or more When the top and bottom area of the screen is blackened, such as movies, view the screen at a distance at least 3 times further than the height of the actual image. (That makes the distance closer than above recommended figure.)

16 3D Eyewear Use • Pay special attention when children are using the 3D Eyewear. 3D Eyewear should not be used by children younger than about 5 - 6 years old, as a guideline. All children must be fully supervised by parents or guardians who must ensure their safety and health throughout the using 3D Eyewear. • Before using the 3D Eyewear, ensure no breakable objects surrounding the user to avoid any accidental damage or injury. • Remove the 3D Eyewear before moving around to avoid falling or accidental injury. • Always store the 3D Eyewear in the case supplied with the 3D Eyewear when not in use. • Use the 3D Eyewear only for the intended purpose and nothing else. • Do not use 3D Eyewear in the condition of high temperature. • Do not use if the 3D Eyewear is physically damaged. • Do not use any devices that emit the infrared signals near the 3D Eyewear, as this may cause the 3D Eyewear false operations. • Do not use devices (such as mobile phones or personal transceivers) that emit strong electromagnetic waves near the 3D Eyewear as this may cause the 3D Eyewear to malfunction. • Do not expose the infrared receiver section to bright light such as direct sunshine and fluorescent light. The 3D image may not be displayed correctly. • Stop using the 3D Eyewear immediately if a malfunction or fault occurs. • Stop using the 3D Eyewear immediately if you experience any redness, pain, or skin irritation around the nose or temples. • In rare cases, the materials used in the 3D Eyewear may cause an allergic reaction. 3D Eyewear 3D Eyewear set (2) • TY-EW3D2MA • 3D Eyewear can be worn over vision correction glasses. 3D Eyewear • N5ZZ00000223 3D Eyewear case Charging cable Ferrite core Part names and functions Infrared receiver Receives infrared signals from the TV. • 3D Eyewear is controlled by receiving infrared signals from the TV, which allows you to view 3D images. • If the eyewear stops receiving infra-red signal from the TV, the power automatically switches off after 5 minutes. Note • Do not soil the infrared receiver section or attach stickers etc. to it. Lenses - Liquid Crystal Shutter Controls the images for 3D viewing. • The left and right liquid crystal shutters are alternately opened and closed in time with the images on the TV screen to achieve the 3D effect. Note • Do not apply pressure to or scratch the surface of the liquid crystal shutter. Power switch Switches on the 3D Eyewear power. The 3D Eyewear is turned on by setting the power switch to “ON”. Set the power switch to “OFF” to turn off the 3D Eyewear. Indicator lamp Lights or flashes during use or charging to show the status of the rechargeable battery. Charging port Connect the charging cable.

17 ■ Battery status shown by indicator lamp Power / indicator lamp status Battery status Lights for 2 seconds when turned on Sufficient battery level Flashes 5 times when turned on Low battery level Flashes once every 2 seconds when in use Operating normally Lights continuously when off Charging Lamp off Power off Attaching Ferrite Core Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical noise. 1 Attach the ferrite core as close to USB connector of the charging cable as shown. Mini USB connector USB connector 2 Close the ferrite core until it clicks. USB connector Charging the 3D Eyewear Preparations • Set [USB Charge in Standby] in the Setup menu to [On]. • Switch off the 3D Eyewear. 1 Turn the TV to Standby mode with the remote control. 2 Connect as shown in the diagram. • The indicator lamp lights red, and charging starts. • When the indicator lamp turns off, charging is completed. (Approximately 2 hours required) 3 After charging is completed, remove the charging cable. Mini USB connector USB connector Note • Do not turn the TV Off with Mains power On / Off switch during charging. Storing and cleaning the 3D Eyewear • Use the supplied 3D Eyewear case to store the 3D Eyewear. • Avoid storing the 3D Eyewear in hot or highly humid locations. • Use a clean, soft and dry cloth to wipe the 3D Eyewear. Otherwise, dirt or dust may scratch the eyewear. • Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off. • Do not submerge the 3D Eyewear in liquid such as water when cleaning. • During the long period of disuse, full charge the 3D Eyewear once every 6 months to keep the battery performance. • As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them.

18 Disposal A lithium-ion polymer rechargeable battery is built in to the 3D Eyewear. Please discard according to local regulations. When disposing this 3D Eyewear, disassemble properly by following the procedure below, and remove the internal rechargeable battery. Do not disassemble this 3D Eyewear except when disposing of it. Danger As the rechargeable battery is specifically for this 3D Eyewear, do not use it for any other device. • Do not charge the removed battery. • Do not throw the battery in a fire, or apply heat to it. • Do not pierce the battery with a nail, subject it to an impact, or dismantle or modify it. • Do not let the wires touch any other metal or each other. • Do not carry or store the battery with a necklace, hair pin, or the like. • Do not charge, use, or leave the battery in a hot location such as near a fire or under the hot sun. Doing so may cause the battery to generate heat, ignite, or rupture. Warning Do not place the removed battery, screws, and other items within reach of infants. Accidental swallowing of such an item may have an adverse effect on the body. • In the event that you think such an item has been swallowed, consult a doctor immediately. In the event of fluid leaking from the battery, take the following measure, and do not touch the fluid with bare hands. Fluid entering into an eye may cause loss of eyesight. • Wash the eye with water immediately without rubbing it, and then consult a doctor. Fluid getting on your body or clothes may cause inflammation of the skin or injury. • Sufficiently rinse with clean water, and then consult a doctor. ■ How to remove the battery Disassemble this 3D Eyewear after the battery has run out of power. The following figures are intended to explain how to dispose of the 3D Eyewear, not for describing how to repair. The 3D Eyewear cannot be repaired once it has been disassembled. 1 Fold the part of the frame without the power switch, and then remove the two screws on the inside of the hinge with a precision Phillips (plus + ) screwdriver. Screws Frame 2 Bend the frame inwards and pull it off from the side cover. Side cover Battery • If it is difficult to remove, insert a flat-blade (minus - ) screwdriver and force it off. 3 Remove the battery from inside the side cover, and cut the two wires one by one with scissors. • Insulate the wire parts of the removed battery with cellophane tape. Note • Take sufficient care when performing this work so as not to injure yourself. • Do not damage or dismantle the battery.

19 To view the 3D images You can enjoy the 3D images in a variety of ways. (Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.) ■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format) • Connect the 3D-compatible player via a fully wired HDMI compliant cable. • If input mode is not switched automatically, select the input mode connected to the player. • If you use the non 3D-compatible player, the images will be displayed on 2D mode. ■ 3D-supported broadcast • Please consult the suppliers of contents or programmes for availability of this service. ■ 3D photos and 3D videos taken by 3D-compatible Panasonic products • Available in Media Player and Network services ■ 2D images converted to 3D Set to [2D 3D] mode in [3D Mode Selection] 1 Turn the 3D Eyewear on 2 Put on the 3D Eyewear 3 Watch the 3D images • Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view 3D images. If you select [Yes], this message will be displayed again in the same condition after Mains power On / Off switch is next turned On. Select [No] if you do not wish to display this message again. 4 Turn off the 3D Eyewear after using it Changing 2D - 3D mode You can easily change the viewing mode between 2D and 3D using the 3D button. Select the mode 2D 3D 3D 2D 3D Mode Selection set select • Items of [3D Mode Selection] vary depending on the condition. [3D] / [2D] / [2D 3D] : Displays the appropriate image that you desire without selecting 3D format • This mode may not work properly depending on the source image format. In this case, select the appropriate 3D format manually. ■ To change 3D format manually When the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting. During the above operation Select the mode (red) 2D 3D 3D Mode Selection (Manual) Top and Bottom - 2D Top and Bottom - 3D Side by Side - 2D Side by Side - 3D Frame Sequential - 2D Frame Sequential - 3D Original set select

20 Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode. [3D Mode Selection] Source image format [Original] [Frame Sequential - 3D] [Side by Side - 3D] [Top and Bottom - 3D] [2D 3D] Frame Sequential Normal 3D∗1 Side by Side (Full) Normal 3D∗1 Side by Side Normal 3D∗1 Top and Bottom Normal 3D∗1 Normal format (2D) Normal 3D ∗1 :  When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images will be displayed without 3D effect. • Depending on the player or broadcasts, the image may be different from the above illustrations. Available range for the 3D Eyewear If the 3D Eyewear is placed outside the coverage area for about 5 minutes, the 3D Eyewear will be turned off automatically. : Coverage area for using the 3D Eyewear 35° 35° View from the top Approx. 3.2 m Approx. 3.2 m Approx. 3.2 m View from the side 20° 20° Approx. 3.2 m Note • You cannot view the 3D images with the 3D Eyewear too far from the TV, because of the difficulty of receiving infrared signals from the TV. • The range may be shortened depending on the obstacles between the infrared sensors on the TV and the 3D Eyewear, the dirt on the infrared sensors or the surrounding environment. • If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be turned off automatically even if in the coverage area. • There are differences in the viewing range of the 3D Eyewear among individuals. • The 3D Eyewear may not operate correctly at the outside of the viewing range.

21 How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. 1 Display the menu • Displays the functions that can be set (varies according to the input signal) 2 Select the menu Example : [Picture Menu] Main Menu Picture Sound Timer Setup access select 3 Select the item Example : [Picture Menu] 1/2 60 30 5 0 0 Viewing Mode Dynamic Contrast Brightness Colour Sharpness Tint Colour Balance Vivid Colour Eco Mode Off Off Warm access select ■ Choose from among alternatives Colour Balance Normal Cool Warm store select ■ Adjust using the slide bar 5 Sharpness Moved store change ■ Go to the next screen Child Lock Access Displays the next screen access ■ Enter characters by free input menu You can enter names or numbers freely for some items. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : # a b c d e f g h i j k l m n o p q r s t u v w x y z ( ) + - . * _ User input Name Set characters one by one Store select set • You can set characters by using numeric buttons. ■ To reset the settings • To reset the picture settings only   [Reset to Defaults] in the Picture Menu (p. 23) • To reset the sound settings only   [Reset to Defaults] in the Sound Menu (p. 24) • To initialise all settings   [Shipping Condition] in the Setup Menu (p. 27) ■ To return to TV at any time ■ To return to the previous screen ■ To change menu pages up down

22 Menu list Menu Item Adjustments / Configurations (alternatives) Picture Viewing Mode Basic picture mode [Dynamic] / [Normal] / [Cinema] / [THX (True Cinema)] / [Game] / [Photo] / [Professional1] / [Professional2] In each Viewing Mode and input, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement. [Dynamic] : Provides enhanced picture contrast and sharpness when viewing in a bright room. [Normal] : Recommended for viewing under normal ambient room lighting conditions. [Cinema] : For watching movies in a darkened room with the improved performance of contrast, black and colour reproduction [THX (True Cinema)] : Precisely reproduces the original quality of the image without any revision. Recommended for playback of THX disc (disc with [THX] logo) THX mode is used to mirror the picture settings used by professional filmmakers, faithfully reproducing the image quality of THX Certified movies. [Game] : Fast response signal specifically to provide suitable images for playing games [Photo] : Set [Reversal Film Effect] to [On] to provide the suitable image quality for photos [Professional1 / 2] : Allows you to set the professional picture settings in [Advanced Settings], [Lock Settings] and [Copy Adjustment] Contrast, Brightness, Colour, Sharpness Increases or decreases the levels of these options according to your personal preference Tint With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste Colour Balance Allows you to set the overall colour tone of the picture [Cool] / [Normal] / [Warm] Vivid Colour Automatically adjusts colours to vivid ones [Off] / [On] Colour Remaster Displays the vivid images with the expanded colour gamut [Off] / [On] / [Auto] Reversal Film Effect Provides the picture effect such as the reversal film [Off] / [On] Eco Mode Automatic Brightness Control function Adjusts picture settings automatically dependent on ambient lighting conditions [Off] / [On] P-NR Picture Noise Reduction Automatically reduces unwanted picture noise and flicker noise in the contoured parts of a picture [Off] / [Min] / [Mid] / [Max] 3D-COMB Makes still or slow moving pictures look more vivid [Off] / [On] Picture in Picture Displays two windows at once 3D Settings 2D 3D Depth Selects a level of 3D-image depth for viewing converted 2D images [Min] / [Mid] / [Max] 3D Adjustment Adjustment of the 3D effect (except in [2D 3D] mode) [Off] / [On] [Effect] : Adjust the 3D depth according to the contents or to your preference. Picture Sequence Select [Reverse] if you feel that the sense of depth is unusual. (except in [2D 3D] mode) [Normal] / [Reverse] Edge Smoother Select [On] if you feel the contoured parts of an image are not smooth enough. (except in [2D 3D] mode) [Off] / [On]

23 Menu Item Adjustments / Configurations (alternatives) Picture 3D Settings 3D Detection Automatically detects the 3D format signals [Off] / [On] / [On (Advance)] [On (Advance)] : Detects all the 3D format signals and displays the 3D image automatically. [On] : Detects the particular 3D format signals (Frame Sequential, etc.) and displays the 3D image automatically. 3D Signal Message Selects whether to give a notification message when a signal of 3D format is found [Off] / [On] Safety Precautions Displays the precautions for viewing 3D images. Screen Display Turns the screen off when you select [Off] [Off] / [On] Advanced Settings Intelligent Frame Creation Automatically compensates the picture frame rate and removes juddering movements to make the images smooth [Off] / [Mid] / [Max] 24p Smooth Film Automatically compensates the picture frame rate to make the 24p source movie images smooth [Off] / [Mid] / [Max] Film Cadence Detection Automatically makes the film source movie images clear [Off] / [On] 3D Refresh Rate Reduces juddering and flicker noises of the 3D images [Auto] / [100Hz] Resolution Enhancer Enhances the picture resolution to make the image sharper [Off] / [Mid] / [Max] Side Panel Increases the brightness of the side panel [Off] / [Low] / [Mid] / [High] 16:9 Overscan Selects the screen area displaying the image [Off] / [On] [On] : Enlarged the image to hide the edge of the image. [Off] : Displayed the image in the original size. AV Colour System Selects optional colour system based on video signals in AV mode [Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC] DVI Input Setting Changes the black level in the image for HDMI input mode with DVI input signal manually [Normal] / [Full] Pixel Orbiter Selects the mode for wobbling of the image to prevent panel “image retention” [Auto] / [On] [Auto] : Automatically works only for the appropriate images and you rarely recognise the wobbling. Scrolling Bar Scrolls the vertical bar to prevent panel “image retention” Reset to Defaults Press the OK button to reset the present Picture Viewing Mode of the selected input to the default settings Sound Mode Selects the basic sound mode [Music] / [Speech] / [User] [Music] : Improves sound quality for watching music videos, etc. [Speech] : Improves sound quality for watching news, drama, etc. [User] : Adjusts the sounds manually by using the equaliser to suit your favourite sound quality. Bass Increases or decreases level to enhance or minimise lower, deeper sound output Treble Increases or decreases level to enhance or minimise sharper, higher sound output Equaliser Adjusts the frequency level to suit your favourite sound quality

24 Menu Item Adjustments / Configurations (alternatives) Sound Balance Adjusts volume level of right and left speakers Headphone Volume Adjusts the volume of the headphones Surround Surround sound settings [Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround] [V-Audio] : Provides a dynamic enhancer of width to simulate improved spatial effects [V-Audio Surround] : Provides a dynamic enhancer of width and depth to simulate improved spatial effects [V-Audio ProSurround] : Provides a more progressive enhancer and reverberation to simulate improved spatial effects Auto Gain Control Adjusts the current volume level if it is extremely different from the previous viewed channel or input mode [Off] / [On] Volume Correction Adjusts the volume of individual channel or input mode Speaker Distance to Wall Adjusts the low frequency sound [Over 30cm] / [Up to 30cm] MPX Selects multiplex sound mode (if available) [Stereo] : Use this normally [Mono] : When stereo signal cannot be received [M1] / [M2] : Available while mono signal is transmitted Audio Preference Selects the initial setting for audio tracks [Auto] / [Multichannel] / [Stereo] / [MPEG] [Auto] : Automatically selects the audio tracks if programme has more than two tracks. The priority is given in the following order - Dolby Digital Plus, HE-AAC, Dolby Digital, MPEG. [Multichannel] : The priority is given to multi-channel audio track. [Stereo] : The priority is given to stereo (2ch) audio track. [MPEG] : The priority is given to MPEG. SPDIF Selection SPDIF : A standard audio transfer file format Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and HDMI2 (ARC function) terminals [Auto] / [PCM] [Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output as Dolby Digital Bitstream. MPEG is output as PCM. [PCM] : Digital output signal is fixed to PCM. HDMI1 / 2 / 3 / 4 Input Select to fit the input signal [Digital] / [Analogue] [Digital] : HDMI cable connection [Analogue] : HDMI-DVI adaptor cable connection SPDIF Delay Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2 (ARC function) terminals if the sound does not synchronize the image Reset to Defaults Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume] and [Surround] to the default settings Timer Timer Programming Sets a timer to remind watching or record forthcoming programmes Off Timer Sets the time until the TV automatically goes to Standby mode [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) Auto Standby Sets the time the TV automatically goes to Standby mode when no operation is performed for the selected times [Off] / [2] / [4] (hours)

25 Menu Item Adjustments / Configurations (alternatives) Setup Eco Navigation Automatically sets the TV to the most suitable energy-saving mode Recording Setup Settings for the recording feature of the USB HDD / SD Card Link Settings VIERA Link Sets to use VIERA Link functions [Off] / [On] HDMI Content Type Adjusts the picture settings according to the content type signal from the connected equipment via HDMI cable [Off] / [Auto] AV1 out Chooses the signal to be transmitted from the TV to Q-Link [TV] / [AV2] / [Monitor] [Monitor] : Image displayed on screen Power on Link Sets to use Power on Link function [Off] / [On] Power off Link Sets to use Power off Link function [Off] / [On] Standby Power Save Controls the power consumption in Standby mode of the connected equipment to reduce the consumption [Off] / [On] Intelligent Auto Standby Makes non-watched or non-used connected equipment go into Standby mode to reduce the power consumption [Off] / [On (With reminder)] / [On (No reminder)] Download Downloads channel, language, country / region settings to a Q-Link or VIERA Link compatible equipment connected to the TV Child Lock Locks a channel / AV input to prevent access to it DVB-S Tuning Menu Favourites Edit Creates list of favourite DVB-S channels Channel List Skips the unwanted DVB-S channels or edits DVB-S channels Auto Setup Automatically sets the DVB-S channels received in the area Manual Tuning Sets the DVB-S channels manually Update Channel List Updates DVB-S Channel List while keeping your settings New Channel Message Selects whether to give a notification message when a new DVB-S channel is found [Off] / [On] Signal Condition Checks the DVB-S signal condition Antenna System Sets the antenna system to use plural LNBs for receiving several satellites [One LNB] / [MiniDiSEqC] / [DiSEqC 1.0] / [Single Cable] LNB Configuration Selects the satellite for each LNB Add TV Signal Adds the TV mode DVB-C Tuning Menu Favourites Edit Creates list of favourite DVB-C channels Channel List Skips the unwanted DVB-C channels or edits DVB-C channels Auto Setup Automatically sets the DVB-C channels supplied Manual Tuning Sets the DVB-C channels manually Update Channel List Updates DVB-C Channel List while keeping your settings Favourite Network Selects your favourite network for each broadcasters (only available in some countries) New Channel Message Selects whether to give a notification message when a new DVB-C channel is found [Off] / [On]

26 Menu Item Adjustments / Configurations (alternatives) Setup DVB-C Tuning Menu Service Replacement Set to [On] to enable a message to switch to the available service (only available in some countries) [Off] / [On] Signal Condition Checks the DVB-C signal condition Attenuator Automatically reduces the DVB-C signal to avoid the interference [Off] / [On] Add TV Signal Adds the TV mode DVB-T Tuning Menu Favourites Edit Creates list of favourite DVB-T channels Channel List Skips the unwanted DVB-T channels or edits DVB-T channels Auto Setup Automatically sets the DVB-T channels received in the area Manual Tuning Sets the DVB-T channels manually Update Channel List Updates DVB-T Channel List while keeping your settings Favourite Network Selects your favourite network for each broadcasters (only available in some countries) New Channel Message Selects whether to give a notification message when a new DVB-T channel is found [Off] / [On] Signal Condition Checks the DVB-T signal condition Add TV Signal Adds the TV mode Analogue Tuning Menu Channel List Skips the unwanted Analogue channels or edits Analogue channels Auto Setup Automatically sets the Analogue channels received in the area Manual Tuning Sets the Analogue channels manually Add TV Signal Adds the TV mode Language OSD Language Changes language for on screen displays Preferred Audio 1 / 2 Selects the first and second preferred language for DVB multi audio (depending on the broadcaster) Preferred Subtitles 1 / 2 Selects the first and second preferred language for DVB subtitles (depending on the broadcaster) Preferred Teletext Selects the preferred language for DVB teletext service (depending on the broadcaster) Display Settings Preferred Subtitle Type Selects the preferred subtitle type [Standard] / [Hard of Hearing] Teletext Teletext display mode [TOP (FLOF)] / [List] Teletext Character Set Selects teletext language font [West] / [East1] / [East2] [West] : English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc. [East1] : Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc. [East2] : Czech, Hungarian, Lettish, Polish, Rumanian, etc. Default Guide Selects the default TV Guide type when the GUIDE button is pressed (only available in some countries) [Channel List] / [TV Guide] [TV Guide] : Electronic Programme Guide (EPG) is available. [Channel List] : EPG is not available and the channel list will appear instead of it.

27 Menu Item Adjustments / Configurations (alternatives) Setup Display Settings Input Labels Labels or skips each input terminal Banner Display Timeout Sets how long the Information banner stays on screen [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds) VIERA Connect Banner Sets the VIERA Connect introduction banner display [Off] / [On] Playing Time Display Set to [On] to display a continuous record of time spent using Game mode every 30 minutes [Off] / [On] MHP Auto Start Sets to [On] to start MHP application automatically (depending on the selected country and broadcaster) [Off] / [On] Radio Mode Sets the timer for turning off the screen automatically when a radio channel is selected [Off] / [5] / [10] / [15] / [20] (seconds) Common Interface Uses include to watch encrypted channels Network Setup Sets the network setting to use in your network environment DivX® VOD Displays DivX VOD registration code Advance(isfccc) Enables the advanced picture settings [Off] / [On] System Menu USB Keyboard Layout Selects the language that your USB Keyboard supports Shipping Condition Resets all settings, for example, when moving house System Update Downloads new software to this TV Licence Menu Software Licence Displays the software licence information Java Logo Displays the Java logo System Information Displays the system information of this TV Other Settings GUIDE Plus+ Settings Update Performs the update of the GUIDE Plus+ schedule and advertising information for the GUIDE Plus+ system Postcode Sets your postcode to display advertisements in the GUIDE Plus+ system System Information Displays the system information of the GUIDE Plus+ system Power on Preference Automatically selects the input when the TV is turned on [TV] / [AV] Set to [TV] to view picture from TV tuner. Set to [AV] to view input from an external equipment connected to the AV1 or HDMI1 terminal, e.g. set top box. USB Charge in Standby Enables to supply the power from the USB port in Standby mode [Off] / [On] Power Save Reduces brightness of picture to economise on power consumption [Off] / [On] Time Zone Adjusts the time data Exchange Channel List Exports / Imports DVB-S Channel List settings using the SD Card to share the same settings with VIERA which has the same function • Menu items and selectable options vary depending on the current input signal, setting and mode. • A different menu will be displayed when [Advance(isfccc)] in the Setup Menu is set to [On] or in the mode of Media Player / network service operations. • Only available items can be selected.

© Panasonic Corporation 2011 M0311-1041 Printed in Czech Republic Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples) : This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Specifications TX-P42VT30E TX-P50VT30E Power Source AC 220-240 V, 50 / 60 Hz Rated Power Consumption 350 W 410 W On mode Average Power Consumption (based on IEC 62087 Ed.2 measurement method) 156 W 190 W Standby Power Consumption 0.30 W 30.00 W (With monitor out recording) • This equipment complies with the EMC standards listed below. EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024 Notice for DVB / Data broadcasting / IPTV functions • This TV is designed to meet the standards (as of August, 2010) of DVB-T (MPEG2 and MPEG4-AVC(H.264)) digital terrestrial services, DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services and DVB-S (MPEG2 and MPEG4-AVC(H.264)) digital satellite services. Consult your local dealer for availability of DVB-T or DVB-S services in your area. Consult your cable service provider for availability of DVB-C services with this TV. • This TV may not work correctly with the signal which does not meet the standards of DVB-T, DVB-C or DVB-S. • Not all the features are available depending on the country, area, broadcaster, service provider and satellite. • Not all CI modules work properly with this TV. Consult your service provider about the available CI module. • This TV may not work correctly with CI module that is not approved by the service provider. • Additional fees may be charged depending on the service provider. • The compatibility with future services is not guaranteed. • Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/tv/