Reflecta Super 8 Quick Installation Manual
Text of the manual
Front (Figure 1):
1) Supply Reel (Arm)
2) Take-up Reel (Arm)
3) Feed Sprocket
4) Forward Button
•
Press briefly (1 sec)—feeding frame one by one,
•
Press and hold (more then 3 seconds)--- Continuously
feeds the frames
5) Stop Button
6) Rewind Button
•
Press briefly (1 sec)— feeding frame one by one,
•
Press and hold (more then 3 secon
Super 8 scanner Quick guide
Before Installing Scanner
Check your Super 8 Film Reel, Film and Hard Disk
Space
Film Reel :
Super 8 Scanner support 1”~8” standard Super 8
film reel
Film:
1.
Please make sure your film is smooth, if not
please use cutter to repair and maintain to
smooth (Fig 1, 2)
2.
If your film is splicing, please check as below
list before
Super 8 scanner Quick guide
Calibration Light Source (First time use)
Open the Case
Turn on Power
Connect to USB to PC
Wait for LED light to turn Orange
Activate the
CyberView S8
Software
1
2
3
4
5
6
7
Create a New Movie Plan
and click “Next” button
click “Calibration” button
After Finish Calibration
click “OK” button
