Rocom GSM500.GC Operation & User’s Manual

- Dial tone generator - GSM network signal level survelliance - Automatic random generated PIN code programming - Integrated emergency power supply - Automatic periodical battery test with failure alarm over SMS or ECII FLEX emer gency phone (not with GSM500.GC.NP) - Local programming using ECII FLEX emergency phone or analogue telephone device with DTMF dial - Remote programming using SMS Package content The GSM500.GC package includes: - Device with plastic case - This user guide - RMA re ...

Description ................................................................................................................................... 4 Package content ........................................................................................................................... 4 Features ............................................................................................................. ...

the network connection and will be ready for another call within few seconds. If the called party hangs up fi rst you will get busy tone until you release the line as well. Dial tone Busy tone Warning tone Acknowledge tone (only during programming) Error tone (only during program- ming) Roaming tone Trouble shooting GSM500 gateway is not initialising, the red LED is always blinking fast Check the following: 1. Is the SIM card correctly installed 2. Is the SIM card in order ...

details can be changes this way. The programming is done using the ECII FLEX emergency phone dial pad, a standard DTMF phone or by SMS. Following can be programmed: • Idle state telephone line voltage; • End-of-dial time out; • Country identifi cation (international access and country code); • Roaming service; • Telephone number for SMS notifi cations; • Administrator telephone number; • Password programming; • Battery test; • Speech chann ...