Acer MP3 Flash Stick Operation & User’s Manual

1. Introduction 1.1 About Acer MP3 Flash Stick------------------------------------------------------------------------------------- 2 1.2 Features -------------------------------------------------------------------------------------------------------------- 2 2. Illustration of function keys and LCD display------------------------------------------------------ 3 3. Quick start------------------------------------------------------------------------------------------------------ 5 4. Function and operation 4.1 MP3 / WMA playback---------------------------------------------------------------------------------------------- 6 4.2 Recording operation------------------------------------------------------------------------------------------------ 7 4.3 Selection / Fast forward / fast backward---------------------------------------------------------------------- 8 4.4 Equalizer settings--------------------------------------------------------------------------------------------------- 9 4.5 Volume control------------------------------------------------------------------------------------------------------- 9 4.6 Key lock--------------------------------------------------------------------------------------------------------------- 9 4.7 Repeat section------------------------------------------------------------------------------------------------------- 10 4.8 Menu operation------------------------------------------------------------------------------------------------------ 10 4.9 Connect to computer----------------------------------------------------------------------------------------------- 11 5. How to Install / Modify / Repair / Remove driver 5.1 Windows 98 / 98SE Installation -------------------------------------------------------------------------------- 13 5.2 Windows 2000 / ME / XP Installation-------------------------------------------------------------------------- 15 6. Remove Acer MP3 Flash Stick from computer ---------------------------------------------------- 15 7. Linux 2.4.0 + / Mac 8.6 + Installation ------------------------------------------------------------------ 17 IMPORTANT NOTICES --------------------------------------------------------------------------------------------17

Acer MP3 Flash Stick is the brand new multi-function MP3 player . Compared with the single-function MP3 Player, Acer MP3 Flash Stick owns not only the stylish outlook with an EQ built in LCD, but also the high quality digital voice recorder. We successfully combine the convenience of well-known USB flash drive , popular MP3 player and delicate-design digital voice recorder in one stick . With two AAA batteries, you will take the advantage of 12 hours non-stop playing time. Acer MP3 Flash Stick is suitable for each occasion—for meeting, for data storage and of course, for music enjoyment. It is absolutely your best choice from various consumer products. 1.2 Features - Current available: 64MB / 128MB / 256MB - Support music format: MP3 / WMA - Earphone jack: 3.5 mm - Audio output: 5mW+5mW - Output frequency range: 20HZ – 20KHZ - Battery: two of AAA battery. - Support USB specification revision 1.1 - Transferring rate up to 12Mbit per second at “Full Speed”. - Support power saving mode to reduce power consumption while no playing Acer MP3 Flash Stick. - Support Windows 2000, ME, XP, Mac OS 8.6 or above and Linux 2.4.0 or above without device driver. - Support Windows 98/98SE with device driver. - LED indicator when Acer MP3 Flash Stick is working. - Key lock switch. - Hot Plug & Play - Enable you to install Acer MP3 Flash Stick at anytime. - Durable solid-state storage – data retention for at least 10 years. - Erase Cycles: 1,000,000 times - No external power is required - DC 4.5V ~ 5.5V from USB port. - Low Power consumption：Write 39.1mA ~ 39.4mA / Read 35.0mA ~ 36.1mA. - Read/Write Speed of USB interface: Read 800KB / Write 600KB - Size: approximate 95.2 x 30.0 x 28.5 mm - Unit weight: approximate 30g (not including battery) -CE and FCC certificate of approval.

S2鍵: 音量控制桿 S3鍵: 錄音操作鍵/ S4鍵: 選單控制鍵 S1鍵: 開機/多功能按鍵 LCD SW1 S4 S3 S1 LED USB JACK S2 SW1鍵: 按鍵鎖 S1: Switch Controller (Power On / Multi-function Switch) S3: Record Button (Record / Repeat Section settings) S2: Volume Control SW1: Key Lock (Read/Write Protect / Button Lock) S4: Mode Key

重複: 單曲, 全部 曲目 音效指示 1 A B ALL MP3 DVR WMA Rock Classic Jazz Pop LP SP REC 電池電量顯示 鍵盤鎖 錄音模式指示 複讀指示 Music Format: WMA,MP3,DVR Battery Status Repeat Play: Single / All Play Mode: Play / Pause / Stop Repeat Section USB indication Key Luck Record Mode Equalizer Settings Selection and play time Volume

MP3/WMA Playback Steps: 1. Press Switch Controller to turn on the player. 2. If there are already MP3 or WMA files in the Flash Memory, the LCD will show「01 0:00」, and the LED will light up. To begin the playback of MP3 or WMA file, press again Switch Controller . Record Operation Steps: 1. Press Switch Controller to turn on the player. 2. Press Record Button to enter record mode and the LCD will show ”—HP--”. Slide Switch Controller to choose record mode, and then press Record Button to start recording. LED will blink, and the ”REC” icon will show up in the display. 3. Press again Record Button to stop record and then enter the record playback mode. The ”REC” icon will disappear and the ”DVR” icon will show up in the display. LED will light off. 4. To play the previous recorded WAV files, press Switch Controller in record playback mode. Connecting to PC Steps: 1. Use USB cable to connect to PC’s USB port, the player will be turned on automatically. 2. The USB indication will show up in the LCD. While connecting to PC, LCD will show ”USb bSy”, and LED will blink. 3. Once the connection is completed, LED will light up, and”---PC--” will appear in the display. You will see a “Removable Disk” in My Computer.

4.1. MP3/WMA Playback (1) Press Switch Controller to turn on the player which will automatically read the content of the Flash Memory and the LED will light up. If there are already MP3 or WMA files in the Flash Memory, LCD will show as Figure 4.1.1. ALL WMA Figure 4.1.1 (2) Press Switch Controller to start playing the first selection. The music format such as MP3 or WMA will be indicated in the display. LED will keep blinking and the selection number as well as the playing time will also be indicated in the display. (Figure 4.1.2) ALL MP3 Figure 4.1.2 (3) To pause during playback, press Switch Controller, and the pause symbol will appear. Elapsed playing time will be paused, too. (Figure 4.1.3). LED will light up instead of flashing. (4) Press Switch Controller to resume playback. ALL MP3 Figure 4.1.3 (5) To stop playing, press Switch Controller for 2 seconds, LED will light up instead of blinking, and the playing time will be reset to zero. (Figure 4.1.5) (6) To set the player to sleep mode, press Switch Controller again for 2 seconds in stop mode. ※ If no operations occurred for 30 seconds in stop mode, the player will enter sleep mode automatically。 ※ To wake up the player，press Switch Controller. ALL WMA Figure 4.1.5 (7) If the Flash Memory has not yet been formatted, or problems occur with the files in the Flash Memory, LCD will show ”OS Err” as in Figure 4.1.7. WMA Figure 4.1.7

appears in the display. (Figure 4.1.8) (9) Slide Switch controller until ”dEL” appears in the display. Press Switch controller again to enter delete mode. Slide Switch controller until ”dEL aLL” flashes in the display. (10) Press Switch controller again to start formatting the Flash Memory. ※ To cancel ”dEL aLL” action, press Record Button or Mode Key simultaneously. WMA Figure 4.1.8 (11) During format or delete, LCD will show ”EL____”as in Figure 4.1.11. WMA Figure 4.1.11 (12) Once the format of the Flash Memory is completed, the playing time in the display will be reset to zero. (Figure 4.1.12) ALL WMA Figure 4.1.12 (13) To delete a single file of MP3 / WMA in stop mode, press Mode Key for 2 seconds to go into the Menu. Slide Switch Controller until ”dEL” shows up in the display. Press Switch Controller again to enter the delete mode. Slide Switch Controller until ”EL OnE” flashes in the display. (Figure 4.1.13) (14) Press Switch Controller again to delete the file selected. ※ To cancel ”dEL OnE” action, press Record Button or Mode Key simultaneously. ALL WMA Figure 4.1.13 4.2. Recording Operation (1)In stop mode, press Record Button to enter record mode, and ”--HP--” will appear in the display (Figure 4.2.1). Press Switch Controller to select record mode. ALL DVR Figure 4.2.1

blinking, and the ”REC” icon will appear. Elapsed recording time will be shown in the display. (Figure 4.2.2) ALL SP REC Figure 4.2.2 (3) To stop record, press Record Button again. LED will turn off, and the beginning of the playing time will be indicated in the display. ”DVR” icon turns up while ”REC” icon disappears. (Figure 4.2.3) ※ To pause the record, press Switch Controller. To resume it, press Switch Controller again. ALL DVR SP Figure 4.2.3 (4) To start play of the previous recorded WAV files in stop mode, press Switch Controller. LCD will show the selection number and the playing time. (Figure 4.2.4) ※ To switch between MP3 and record mode in stop mode, press Mode Key. ALL DVR SP Figure 4.2.4 (5) Press Switch Controller to pause the playback，playing time will be paused as well. (Figure 4.2.5) (6) Press Switch Controller to resume playback. ALL DVR SP Figure 4.2.5 (7) If the space in the Flash Memory is used up during record, LCD will show ”FULL” (Figure 4.2.7) and record will stop. ※ Press any key to go back to record stop mode. ※ File deletion, selection, fast forward and fast backward in record mode are the same as in MP3 / WMA mode. ALL SP REC Figure 4.2.7 4.3. Selection / Fast Forward / Fast Backward (1) To select during playback, slide Switch Controller upward once for the previous file, and downward for the next one. Playback will start from the beginning of the selection. (Figure 4.3.1) ALL WMA Figure 4.3.1

desired selection shows up in the display. Press Switch controller to start play. (3) To locate a particular point in a selection, Slide Switch Controller up for fast backward and slide down for fast forward. Playing time in the display will change accordingly. Release Switch Controller and the playback will start from the time indicated in the display. 4.4. Equalizer Settings (1) Press Mode Key for 2 seconds until ”Eq” appears in the display. (Figure 4.4.1) Press Switch Controller to enter the menu of Equalizer Settings. (2) Slide Switch Controller to select the following settings: Normal Æ POP Æ JAZZ Æ CLASSICAL Æ ROCKÆ Normal. Press Switch Controller again to confirm, then the icon will come out in the display. WMA Figure 4.4.1 ALL WMA ALL WMA Pop ALL WMA Jazz ALL WMA Classic ALL MP3 Rock 4.5. Volume Control (1) During playback，slide Volume Controller to the left to turn down and right to turn up the volume which will be shown in the display. (Figure 4.5.1) -- Sound Level: 0 ~ 63 (2) To continuously increase or decrease the volume, slide Volume Controller to the right / left and hold. To stop volume control, stop sliding Volume Controller and the LCD will resume the normal display. ALL WMA Rock Figure 4.5.1 4.6. Key Lock (1) Player status: click switch toward to Switch Controller, all buttons and switch controller will be locked and no working. (2) Removable disk status: click switch toward to Switch Controller, writing will be protected.

(1) During playback, press Record Button once to enter the repeat read mode. The start point A will be marked. ”A-B” icon will appear and “B” starts flashing. (Figure 4.7.1) 1 A B MP3 Figure 4.7.1 (2) Press Record Button again to mark the end point “B” whose icon will stop flashing. A→B repeat read will go on. (Figure 4.7.2) ※ If point “B” is not marked until the end of the selected MP3 file, the playback of the next selection will start and point ” A” will disappear. A B ALL MP3 Figure 4.7.2 (3) During A→B repeat read，press Record Button again to leave this mode. Normal playback will resume from point “B”, and the ”A-B” icon will disappear from the display. (Figure 4.7.3) ※ During A→B repeat read，press Switch Controller once to pause the repeat read, press Switch controller once again to resume it。 ALL MP3 Figure 4.7.3 4.8. Menu Operation (1) Press Mode Key to enter Menu operation which contains 3 functions: (1) Equalizer Settings (Eq), (2) Playback Settings (Rep), (3) File Deletion (dEL). To select, slide Switch Controller up and down and the function will change cyclically as follows : Eq Æ rEP Æ dEL ÆEq. Press Switch Controller again to confirm the selection. (Figure 4.8.1) WMA Figure 4.8.1 (2) Eq Menu: Under Equalizer Settings, slide Switch Controller to select among 5 settings with the following cycle: Normal Æ POP Æ JAZZÆCLASSICALÆROCKÆNormal Press Switch Controller to confirm the setting. (Figure 4.8.2) ALL WMA Figure 4.8.2

among the following 3 repeat settings: (1) Repeat ALL: repeat all the selections (2) Repeat 1:repeat a single selection (3) NO Repeat: to cancel repeat Press Switch Controller again to confirm the setting. (Figure 4.8.3) 1 WMA Figure 4.8.3 (4) dEL Menu: Under file deletion，slide Switch Controller to select among the deletion of a single file or all files with the following cycle: EL ONEÆ EL aLLÆ EL ONE Press Switch Controller again to confirm the setting. (Figure 4.8.4) ALL MP3 Figure 4.8.4 4.9. Connect to Computer (1) Use the USB cable to connect to PC’s USB port, and the USB indication will show up in the LCD when the player is plugged in. (Figure 4.9.1) Figure 4.9.1 (2) During USB operations (including connection with PC, file copy / delete, Flash Memory format), the LED will blink and ”USb bSy” will appear in the display. (Figure 4.9.2) Figure 4.9.2 (3) Once the connection is completed, LED will light up, and”---PC--” will appear in the display. You will see a “Removable Disk” in My Computer. (Figure 4.9.3) Figure 4.9.3

player back to stop mode, and the removable disk will disappear from My Computer. Playing time of the 1st file will be displayed in the LCD. (Figure 4.9.4) ※ When file copy / delete through PC is finished, make sure the USB operation has come to a complete stop before unplugging the player from PC’s USB port. Otherwise it may result in damages to the files in the Flash Memory. ALL WMA Figure 4.9.4

5.1 Windows 98/98SE Installation： (1) Plug Flash Stick into USB port. System will detect one new hardware and search for proper driver to install. (2) Choose the first recommend to install. InstallShield Wizard The InstallShield Wizard will search new driver for the following device, Acer MP3 Flash Stick InstallShield Wizard What do you want to do? Search proper driver for the device. (recommend!) Display driver list, I want to choose proper driver. Back Next Cancel Back Next Cancel

(4) To execute installation by press “Next”. InstallShield Wizard InstallShield Wizard Windows will search new driver from one of following methods, press Next to start search. Floppy Disk A: CD ROM Location: Review Next Back Cancel Back Next Cancel Windows search program for the device, Windows is preparing to install the driver. Press “Back” to choose other methods or press “Next” to execute installation. Location: E:\Smmd.INF

5.2 Windows ME / Windows 2000 / XP Installation For these three operating systems, NO Driver is needed, because Windows has built-in driver to support USB removable disk. Simply plug Acer MP3 Flash Stick into the USB port and it will be recognized by the system. System will setup Acer MP3 Flash Stick automatically without any further installation of driver. Once installation is completed, you will see a “Removable Disk” drive in My Computer. 6. Remove Acer MP3 Flash Stick from computer After using Acer MP3 Flash Stick, please choose one of the methods below according to your Operating System to remove Acer MP3 Flash Stick from USB port: Windows 98/98SE：You could unplug Acer MP3 Flash Stick from the USB port directly once the LED stops blinking and its icon would disappear automatically. Windows Me/2000/XP：Click the icon of Acer MP3 Flash Stick at the right down corner, and a “Stop USB Mass Storage Device-Drive(H:)” menu appears (Fig.6.1). Click the menu, and the below window appears telling you “the ‘USB Mass Storage Device’ device can be safely removed from the system”. Click “OK” to close the window (Fig.6.2), then you can safely remove Acer MP3 Flash Stick. InstallShield Wizard Windows has successfully installed software for the new hardware. Cancel Next Back

Again, No Driver is required for these two operating systems. Simply plug the Acer MP3 Flash Stick into the USB port and the system will automatically find Acer MP3 Flash Stick. After using Acer MP3 Flash Stick, you could unplug Acer MP3 Flash Stick from the USB port directly once the LED stops blinking, then its icon would disappear automatically. For Linux user, please refer to Important Notices. Important Notices： (i) In OS Windows 98/98SE, if you don’t set up installation firstly, system will ask you to put driver disk for running installation. Be sure to unplug Acer MP3 Flash Stick before running setup programs. If you install the driver with Acer MP3 Flash Stick plugged, it may cause setup error or failure. (ii) If you plug Acer MP3 Flash Stick into the USB port. System can find Acer MP3 Flash Stick, but you are unable to access it. Please FORMAT Acer MP3 Flash Stick. (iii) Before unplugging Acer MP3 Flash Stick from the USB port in Windows ME/2000/XP, make sure you go to the right hand bottom of the screen to stop the USB device. Otherwise, it may result in losing data that you have saved on Acer MP3 Flash Stick. (Please refer to 6.2.) (iv) Linux uses a so-called "USB Manager", which does automatically load kernel modules (drivers) for USB devices. It loads only drivers for devices that are present on the USB bus to reduce memory usage. Per default, the USB Manager does not come with the USB Drive pre-configured. However, you can easily configure the USB Manager to automatically recognize the USB Drive yourself. Just add the following to the configuration file, usbmgr.conf (usually in /etc/usbmgr): vendor 0xd7d product 0x100 module scsi_mod, usb-storage This line identifies the USB Drive and tells the USB Manager to load the SCSI as well as the USB storage module. The SCSI module is needed in order to talk to both SCSI and USB storage devices, while the usb-storage module is needed to talk to USB storage devices. Do not forget to either reload the USB Manager's configuration or to restart the USB Manager (for instance, do as root: /etc/init.d/usbmgr reload).