NDS Radiance Ultra SERIES Operation & User’s Manual

ZeroWire® Embedded Technology Note: Information and procedures in this section apply only to use of Radiance Ultra displays configured with the optional pre-installed embedded ZeroWire Receiver. Warnings and Cautions This product is a Class I medical device according to M.D.D. in Europe. No modifications are allowed. This product is a Class II medical device in the United States and Canada. No modifications are allowed. This equipment/system is intended for use by healthcare professionals only. Federal law restricts this device to sale by or on the order o ...

Display Menu To open the Display Menu, tap the MENU button. The ZeroWire Menu displays by default, with details of the current Primary and Secondary inputs listed left and right across the top of the menu above the menu tabs. To select other menus, tap the or buttons to highlight the menu tab, then tap the SCROLL button to enter the menu. To adjust a parameter, press the SCROLL button to move the row selection down to it, and then tap the or buttons to adjust the parameter or to select a setting. Parameter adjustments are applied in real time while changing values ...

SmartSync™/Alternative Modes: (VGA, RGBS, YPbPr, and SOG only) NDS proprietary SmartSync technology examines incoming signals to automatically display the video image in its proper format. Alternative Modes are used to manually distinguish between modes whose timing characteristics are very close. SmartSync: To enable SmartSync, tap the button. Alternative Modes: To make an Alternative Modes adjustment, tap the button. After selecting Alternative Modes. the mode changes incrementally each time the button is tapped until the selected mode equals the maximum avail ...

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. This document is subject to change without notice. NDSsi provides this information as reference only. Reference to products from other vendors does not imply any recommendation or endorsement. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic, or other means, in any form, without prior written permission of NDSsi. ...

Corporate Headquarters 5750 Hellyer Ave San Jose, CA 95138 USA 408 776 0085 [email protected] Europe GSI Distribution (USD) GmbH Münchner Strasse 2A 82152 Planegg Germany +49 89 31 707 100 [email protected] Asia Pacific East Square Omori 6-20-14 Minamioi, Shinagawa-ku Tokyo 140-0013 Japan +81 3 5753 2466 [email protected] Contact ...

Recycling Follow local governing ordinances and recycling plans regarding the recycling or disposal of this equipment. Intended Use and Contraindications Note: If your display is configured with embedded ZeroWire, please refer to the ZeroWire “Intended Use and Contraindications” statement on page 25. Intended Use Radiance Ultra series monitors are intended for use in a medical environment to display high quality video and graphic images. Contraindications 1. Do not use this product in the presence of flammable anesthetics mixture with air, oxygen or nitrous oxide. 2 ...

Specifications and Supported Resolutions Specifications Specifications are subject to change without notice. Contact factory for current specifications. Radiance Ultra 27” Radiance Ultra 32” Radiance Ultra 32” TruColor Viewing Area (Diagonal) 27.0 in. (685 mm) 31.5 in. (800 mm) 31.5 in. (800 mm) Typical Luminancea (cd/m2) 900 400 650 Native Resolution 1920 x 1080 1920 x 1080 1920 x 1080 Pixel Pitch (mm) 0.311 0.364 0.364 Viewing Angle (Horizontal & Vertical) 178° 178° 178° Contrast Ratio (Nominal) 1000:1 1100:1 1100:1 Color Gamut BT.709/SM ...