Sanyo ICR-B160NX Instruction Manual

correctly or not 1. [Start] menu > [Settings] > [Control Panel] > [System] > [System Properties] > Open [Device Manager] in tab. 2. Double click [Disk drives] > double click [Hard disk controllers]. If the following screen is displayed, it means USB driver has installed correctly. ...

correctly or not 1. [Start] menu > [Settings] > [Control Panel] > [System] > [System Properties] > Open [Device Manager] in tab. 2. Double click [Disk drives] > double click [Hard disk controllers]. If the following screen is displayed, it means USB driver has installed correctly. ...

After connection, the following screen will appear (Windows XP only). - For Windows98/98SE/ME/2000, this operation is not needed. The screen shots are of Windows XP. Adjust your settings to match your PC’s environment. In this manual, [Take no action] is selected, [Always do the selected action] is checked, and [OK] is clicked. This completes the connection to the PC. When connected to the PC, the unit display will be as shown below and none of the operating buttons will work. Before disconnecting the unit from the PC, be sure to follow the steps ...

(MIC(ST)) 2. Built-in microphones (L/R) 3. Play/Pause button (i) 4. Stop/Menu button (n) (MENU) 5. Erase button (ERASE) 6. Skip/Search buttons (f, e) 7. Volume buttons (VOL.) 8. Folder/Repeat button (FOLDER/REPEAT) 9. Record/Pause button (m) (PAUSE/REC) Controls 10. Headphones socket ( ) 11. Hold switch (HOLD) 12. USB terminal (I/O) 13. Speaker 14. Battery compartment lid ...

1. In the stop mode, press the n/MENU button for at least 2 seconds. 2. Press the e or f button to select “dATE TIME”. The unit enters the date and time setting mode. 3. Press the i button. The year display blinks. 4. Press the e or f button to select the year. Then press the i button. The month display blinks. 5. Set the month, day, hour display (24H or AM/PM), hour and minute by following step 4 above. When the minute setting is completed, “dATE TIME” returns. 6. Press the n/MENU button. If you press the n/MENU button in the stop mode, the current time appe ...

Press the FOLDER/REPEAT button to select the folder (A, b, C, d or M). Note: - Since the M folder is the music folder, ordinary voice data cannot be recorded to it, and is instead recorded automatically to the A folder. No recording is possible if the A folder is full. - The unit can record up to 99 files in one folder. “FILE FULL” appears when attempting to record the 100th file. Starting recording Press the m PAUSE/REC button. Recording starts (standard recording mode is assumed for the following description). To stop recording Press the n/MENU button. To pause ...

(MIC(ST)) 2. Built-in microphones (L/R) 3. Play/Pause button (i) 4. Stop/Menu button (n) (MENU) 5. Erase button (ERASE) 6. Skip/Search buttons (f, e) 7. Volume buttons (VOL.) 8. Folder/Repeat button (FOLDER/REPEAT) 9. Record/Pause button (m) (PAUSE/REC) Controls 10. Headphones socket ( ) 11. Hold switch (HOLD) 12. USB terminal (I/O) 13. Speaker 14. Battery compartment lid ...