Schwaiger DSR 6020 Operating Manual

DSR 6020 Operating manual Modifications and errors reserved. We do not assume any liability for printing errors. Dear customer, Having in mind an environmentally friendly behaviour we ask you to switch off your receiver after usage by operating the mains switch at the rear side of the device. With this, you contribute to the protection of the environment and save money.

2 ZOOM Enlarges TV image 3 LIST Invokes TV channel list 4 TIMER Invokes timer 5 TEXT Invokes Teletext 6 MUTE Turns off sound 7 M/P Multi-picture function, invokes thumbnail view 8 V+ Increases volume/cursor moves to the right 9 OK In normal mode: invokes current channel list In a menu: confirms menu item 10 CH q Switches to the next lower channel location/ cursor moves down 11 FAV Invokes own favourites list 12 RECALL Switches to previously selected channel 13 PAUSE Stills the frame 14 INFO Displays reception data of the current channel (satellite-finder function) 15 0–9 Selects channel directly, numerical input 16 P– In normal mode: changes channel group In TV channel list: Ten-key block commutation 17 P+ In normal mode: changes channel group In TV channel list: Ten-key block commutation 18 V– Decreases volume/cursor moves to the left 19 CH p Switches to the next higher channel location/ cursor moves up 20 MENU Invokes main menu 21 EXIT Exits menu or menu item 22 AUDIO Changes audio mode 23 EPG Invokes Electronic Programme Guide (if offered by the broadcasting station) 24 TV/SAT Switches between terrestrial and satellite antenna 25 TV/RADIO Switches between TV and radio mode

• appropriate • safe • favourable usage of the digital satellite receiver, in short, the “receiver”. We assume that the user of the receiver has overall knowledge regarding the handling of audio and video equipment. Each person who • installs • connects • operates • cleans • disposes of this receiver must be familiar with the entire content of this operating manual. Always keep this operating manual in the proximity of the receiver. Style features Specific style features have been used in different sections of the operating manual. Thus, you can easily differentiate whether it concerns normal text, • enumerations or ð actions.

Style features ................................................................. 4 Contents ......................................................................... 5 Safety instructions ......................................................... 7 Basic safety instructions ........................................... 7 Explanation of safety instructions .................................. 11 Appropriate use ............................................................. 11 Scope of supply ........................................................... 12 Description ................................................................... 13 Connecting the receiver .............................................. 17 LNB cable installation .................................................... 18 Connection with the HDMI cable ................................... 21 Connection with the SCART cable ................................ 23 Audio connection mit Cinch-Kabel ................................. 25 Connection of an audio-digital receiver ......................... 27 Connection and rough direction of the antenna ............. 29 Getting started ............................................................. 34 Remote control ............................................................... 34 The receiver ................................................................... 36 Operation ...................................................................... 37 Screen-inlays while switching channels ......................... 37 User interface on the TV screen .................................... 39 Menu structure ............................................................... 40 Menu navigation ............................................................ 41 Channel (symbol: TV) .................................................... 42 Installation (symbol: satellite antenna) ........................... 48 System Setup (symbol: receiver) ................................... 52 Tools (symbol: tool case) ............................................... 58

Keys with special functions ........................................ 60 Switch between TV and SAT ......................................... 60 Switch between TV and radio ........................................ 60 ZOOM ............................................................................ 60 LIST ............................................................................... 61 AUDIO ............................................................................ 61 EPG ............................................................................... 61 TEXT .............................................................................. 62 M/P ................................................................................. 62 MUTE ............................................................................. 63 FAV ................................................................................ 63 RECALL ......................................................................... 63 INFO - acoustic signal for directing the satellite antenna .......................................................................... 64 0 - Sleep timer ................................................................ 64 PAUSE ........................................................................... 64 Uninstalling the receiver ............................................. 65 Cleaning ........................................................................ 65 Tips & tricks/trouble shooting .................................... 66 Disposal ........................................................................ 69 Specifications ............................................................... 70 Manufacturer ................................................................ 72 Guarantee ..................................................................... 73 Conformity hints .......................................................... 74 Glossary ........................................................................ 75

operating the receiver. Please follow all warnings and instructions on the equipment and in the operating manual. Basic safety instructions Electrical connection • Separate the receiver from the power source in case of operational disruptions. Please note: The receiver will remain live, even if it is turned off with the mains switch on the rear side. • Do not expose the receiver to rain or any kind of humidity to avoid risk of fire and electric shock. • Never open the casing. Otherwise, there is a risk of electric shock. • Connect the receiver only to a professionally installed mains socket of 100–240 V~, 50–60 Hz. • The total power consumption by the antenna connection of the receiver “LNB IN” must not exceed 300 mA. • Pull out the mains plug from the socket if the equipment is not in use for a longer period of time. Only pull at the mains plug, not at the cable. • In case of storms pull out the mains plug of the receiver from the socket. • In case of a storm, loosen the LNB cable from the receiver.

immediately pull out the mains plug from the socket. Ask a qualified person to check the equipment before operating it again. Otherwise, there is a risk of electric shock. • Ensure that the power source (socket) is easily accessible. • Do not bend or crimp the mains cable. • If the mains cable is damaged, the receiver must be repaired by an expert before reusing it. Otherwise, there is a risk of electric shock. • Never allow children to operate the receiver or to play with the antenna unit unless supervised. • Always ask qualified personnel to carry out maintenance jobs. Otherwise, you are putting yourself and others at risk. • Disconnect the receiver from the power source in case of operational disruptions. • Spare parts must be ordered directly from the manufacturer • Modifications of the device lead to an extinction of the manufacturer’s liability. • Remove the protection films. Caution! Note regarding separation from the mains supply. The Standby key of this device does not separate the device completely from the mains supply. In addition, the device consumes current in standby mode. To

the mains plug must be pulled out of the socket. Suitable location • Place the receiver on a stable and even base. • Avoid proximity to: - heat sources, like e. g. heaters, - naked flames, like e. g. candles, - devices with strong magnetic fields, like e.g. loudspeakers. - Never place receptacles filled with liquid (e. g. vases) on the receiver • Avoid direct sunlight and places with an extremely high amount of dust. • Never cover ventilation slits. Ensure adequate ventilation of the receiver. • Do not place any heavy objects on the receiver. • Humidity may settle in the receiver if it is brought into hot surroundings from a cold one. In this case, wait for about an hour before operating the equipment. • Arrange the mains and antenna cable in such a manner that no-one steps or trips over them.

• Batteries may contain toxic agents. Ensure that batteries are not within the reach of children. Children may eat and swallow batteries. • Batteries that are getting discharged may damage the remote control. If the receiver is not in use for a longer period of time, remove the batteries from the remote control. • Batteries may contain toxic agents. Therefore, dispose of the batteries immediately in an ecologically accepted manner according to the prevailing statutory regulations. Never throw the batteries into normal household waste. • Never expose the batteries to open fire or strong heat, as otherwise there is a danger of explosion. • Replace the batteries always by batteries of the same type.

The following categories of safety instructions are included in this operating manual: Danger! Instructions with the word DANGER give a warning against possible personal injuries. Caution! Instructions with the word CAUTION give a warning against possible material or environmental damages.  These instructions contain special information regarding an economic use of the receiver. Appropriate use The receiver is designed for receiving unencrypted digital satellite channels (free-to-air, SDTV) for private use. It is exclusively meant for this purpose and must only be used for the same. This also includes paying attention to all information contained in this operating manual, especially in the safety instructions. Any other usage is considered to be improper and may lead to material damages and even personal injuries. Moreover, it will result in the immediate loss of guarantee. The manufacturer does not bear any liability for damages caused due to improper use.

Check the scope of supply after purchase. The scope of supply may vary according to the type of the receiver. Please follow the information on the packaging. No. Pieces Description 1 1 Receiver 2 1 Remote control 3 2 Batteries type AAA/1.5 V - 1 Operating manual (not shown above)

digital satellite channels (free-to-air) via satellite antenna. It is not necessary to programme the receiver yet. The most important broadcasting stations and satellites have been pre-programmed. The satellite antenna has to be directed towards the desired satellite. The receiver will scan for further new channels as soon as you initiate the automatic scanning of broadcasting stations for this satellite. Satellites not preset may be added. All receiver settings can be done easily using the user interface (menu) on the TV monitor. The multilingual user interface supports following languages: • german • italian • spanish • greek • english • polish • czech • slovakian • hungarian • danish • french

company: • ASTRA1 19,2°E • Hotbird 13,0°E • Türksat 42°E • ASTRA2 28,2°E • Sirius2 5,0°E • Amos/Atlantic 4-5°W • HispaSat 30°W • Eutel W2 16°E • HellasSat 39°E • ASTRA 23,5°E Other features of the equipment: • Software update via satellite ASTRA1 19.2° E or via the RS232 connection on the rear side of the device. • Saves the channel last watched (Last Channel Memory) • LNB control logic (sound 0/22 kHz), max. current delivery for LNB 300 mA

frequency • Manual PID entry possible • 3 keys at the frontage • plug & play • The power draw in standby mode is 2W only. • 100–240 V~, 50/60 Hz mains connection • 4500 channel storage locations • Child lock (preset password: 0000) • 1 favourites list and 8 channel groups • Automatic scanning of broadcasting stations • List editor for broadcasting stations • Analogue sound output through Cinch connector (stereo), volume adjustment possible via remote control • AC3 coaxial output (digital audio) • 2 Euro-SCART connections for TV and video set (VCR) • HDMI-connection • Loop-through-function in standby mode for the connection of an analogue receiver • Super fast videotext with a memory of 800 pages • Digital radio reception, background image for radio (background display) • Additional channel information is displayed when the channel is changed. • DiSEqC 1.0, 1.2, USALS is supported if an appropriate antenna unit is connected

• Screen aspect ratios can be set to 4:3, 16:9, and automatically (letterbox) • 8x multi-functional timer linked with EPG, sleep timer • Electronic Programme Guide EPG (up to 14 days in advance, channel-dependent) • SCPC/MCPC reception standard C/Ku-band satellites • Automatic selection of the TV standard with video converter • Digital satellite finder for optical and acoustic adjustment of the paraboloidal-type reflector • 100– 240 V~, 50/60 Hz mains connection • 4500 channel storage locations • Child lock (preset password: 0000) • 1 favourites list and 8 channel groups • Automatic scanning of • • •

The receiver is connected with your satellite antenna by means of a coaxial cable. If necessary, you have to prepare a coaxial cable before connecting the receiver.  The coaxial cable is not included in the scope of supply. Caution! Connect the receiver to the mains supply only after you have connected it to all equipment and the antenna properly. Otherwise, the receiver can suffer damages. The wire netting and the inner core of the coaxial cable carry current during operation.

(cp. installation diagram on the next page) For the installation of the F connector on the coaxial cable you will need a knife (ideally a wire stripper) and side cutting pliers.  When stripping the isolation, neither the inner core or the foil nor the wire netting must be damaged. ð Cut 8 mm of the coaxial cable at each end up to the inner core. ð Carefully cut 10 mm of the outer insulation so that the wire netting is exposed. ð Turn the wire netting backwards and wind it over the outer insulation in such a manner that it does not touch the inner core. ð Remove the inner insulation together with the foil placed over it up to 2mm before reaching the wire netting. Caution! The wire netting and the foil must not touch the inner core. The foil must enclose the inner insulation and must not be damaged. ð Rotate the F connector onto the turned-back wire netting until the connector touches the inner insulation.  The wire netting must not protrude from the back of the connector end.

that it projects maximum 1 mm from the connector.

“LNB IN” antenna connection of the receiver. Fasten the other end of the coaxial cable on the LNB.

ð Insert the HDMI cable in the HDMI socket of the receiver. ð Connect the HDMI-Kabel to the TV set. Follow the operating manual of the TV set. ð Insert the Scart cable in the Scart socket “VCR” of the receiver if you want to connect a video set. ð Connect the SCART cable with the video set. Follow the operating manual of the video set. ð Insert the Cinch connector of the Cinch cable in the “AUDIO-R” and “AUDIO-L” sockets of the receiver if you want to connect a stereo system.  The HDMI cable is not included in the scope of supply.

ð Insert the SCART cable in the SCART socket “TV” of the receiver. ð Connect the SCART cable to the TV set. Follow the operating manual of the TV set. ð Insert the Scart cable in the Scart socket “VCR” of the receiver if you want to connect a video set. ð Connect the SCART cable with the video set. Follow the operating manual of the video set. ð Insert the Cinch connector of the Cinch cable in the “AUDIO-R” and “AUDIO-L” sockets of the receiver if you want to connect a stereo system.  The Scart cable is not included in the scope of supply.

If you want to connect a stereo system, connect it to the receiver with a cinch cable. ð Connect the „AUDIO-R“ and „AUDIO-L“ sockets of the receiver to the audio inouts of the stereo system. Caution! Never connect the Phono input of your stereo system to the receiver; it may damage your stereo system. Strictly follow instructions for connecting the Cinch cable provided in the operating manual of your stereo system.  The Cinch cable is not included in the scope of supply.  Your TV set need not be switched on for radio reception. The audio is given out by the connected stereo system. For choosing the radio station, you can use the radio list shown on your TV set as an orientation.

If you want to use 5-channel audio transmission (Dolby digital sound/AC3), you must connect your audio-digital receiver to the coaxial output of the receiver. Caution! Never connect the Phono input of your stereo system to the receiver; it may damage your stereo system. Strictly follow instructions for connecting the Cinch cable provided in the operating manual of your stereo system. Caution! Please follow strictly the information regarding connection in the operating manual of your audio- digital receiver.  The coaxial cable is not included in the scope of supply.  Your TV set need not be switched on for radio reception. You must switch on the TV set if you want to receive TV sound through your stereo system.

ð Insert the coaxial cable in the “COAXIAL” socket of the receiver. ð Connect the coaxial cable to the audio-digital receiver. Anschluss-Schema

You must connect the antenna cable to the LNB before directing the antenna.  Please follow also the instructions in the operating manual of your satellite antenna. Caution! The receiver should only be connected to the power supply after you have connected the antenna cable to the receiver. ð Screw the F plug to the LNB connection. If you have not mounted and directed your satellite system yet, you must first find a suitable location for mounting the antenna. Please make sure that the antenna is directed towards the south-east. This means, you must have a free view in this direction when you stand behind the antenna. Keep in mind that the antenna must never be mounted behind a balustrade, a handrail or other obstacles (such as trees).  When searching the southern direction, the position of the sun might help you. During summer time, the sun is exactly in southern position at 12 am noon and during winter at 1 pm.

antenna. In this angle of 90° nearly all common satellite positions, such as ASTRA1 19.2° E, Eutelsat Hotbird 13° E, and Türksat 42° E, can be found. Depending on which satellite you wish to receive, there must be free sight without any obstacles in this angle. This must especially be ensured with an installation on a wall. Make sure that you can turn your antenna completely without having contact with the wall of your house before installing a corresponding wall bracket (not necessarily included in the scope of supply). After having made all relevant connections you can now start with the setup of the antenna. Please check again that the receiver is connected with the LNB of the antenna and the receiver with your TV set. As soon as these cable connections have been made correctly, you can switch on the devices.

set has been adjusted to the receiver, i.e. in case of a Scart connection or HDMI connection, the TV set must be set to the correct AV channel. Second step: Switch on the receiver. Please ensure that the receiver has been preset for the most common satellites and their channels and that you just have to enter the channel locations via the numeric keys of the remote control of the receiver. Example: If you wish to receive the satellite ASTRA1 19.2° E, you must set your receiver to channel location 1 for directing the antenna. The same applies also for other satellites, such as Hotbird. If you wish to direct your antenna to Hotbird, just call a preset channel of Hotbird with your receiver. Third step: Now, direct your antenna to the satellite you selected. You have several options to do so. The easiest and most cost-effective solution is the following way: Stand behind the antenna and move the antenna completely into vertical position (see picture B). Make sure that the receiving compo-nent of the antenna is directed towards the south (see picture A).

left) while observing the TV set, until the receiving component points exactly towards the east, i.e. rotate by 90° (see picture below). South East  In case of digital satellite reception, the receiver receives the transmission signal with a time lag. Therefore, turn the antenna very slowly and wait at each position for some seconds until the receiver shows the signal strength on the screen menu.

become steeper by 1°. For this purpose, pull at the top of the antenna. Now, return the antenna slowly to its initial position towards the south. Now, turn the antenna once again 1° steeper and move it again to the left in eastern direction. Repeat these steps until the vertical elevation angle crosses the horizontal azimuth angle, e.g. for ASTRA1 at 19.2° east, and you are receiving the set channel on your TV set. Now, please check again if you are receiving the channel set on the receiver and zap through the channels with the CHp and CHq keys of the receiver or by using the remote control. As soon as you have found the desired satellite, you should improve the direction of the antenna until you get a clear image on all channels. You can achieve this by an optimum adjustment of the vertical elevation angle and the horizontal azimuth angle (see pictures A and B). Please use also the indication of the signal strength and signal quality by pressing the INFO key. Finally tighten all screws thoroughly to make sure that the direction of your antenna cannot change anymore.

required. ð Open the battery compartment. ð Insert two batteries into the battery compartment - paying attention to the indicated polarities and push the cover of the battery compartment carefully until it is locked.  The strap in the battery compartment is intended to make it easier for you to take out the batteries. If you place the strap under the inserted batteries, you can remove them by simply pulling it out. ð Replace discharging batteries on time. Otherwise, the sending capacity of the remote control will be too low. ð Always replace both batteries simultaneously and use batteries of the same type.

once a year. ð If one battery has leaked, wear protective gloves and clean the battery compartment with a dry cloth. Caution! Batteries may contain toxic agents that are hazardous to health and environment. Therefore, dispose of the batteries in any case according to the prevailing statutory regulations. Never throw the batteries into normal household waste. The remote control transmits infrared signals to the receiver. Please refer to the overview of the remote control for the functioning of the keys. ð Point the remote control towards the front side of the receiver and slightly press the corresponding key once.

antenna are proper before connecting the receiver to the mains. ð Insert the mains plugs of the connected equipment in the mains socket and switch it on. ð Switch on the AV channel of the TV set. If the receiver is connected via Scart and the TV set recognizes the switching voltage emitted by the receiver, it will switch automatically to the AV mode. If the receiver is connected via HDMI, it depends on the TV set if it switches automatically to the AV channel or you have to switch by yourself to the AV channel. ð Insert the mains plug of the receiver in the mains socket. Turn on the mains switch on the rear side of the receiver. The device is in normal mode. The LED displays the current channel. The receiver is supplied with preset TV channels and can be used directly. If you want to check if new channels are available, initiate a scan for broadcasting stations. Read the following information further below for this purpose.  To get into standby mode, press the red key at top right of the remote control. The current time is displayed on the LED. The device consumes approx. 2W only. Currently, this is a very low value of power consumption.

When a channel is switched, an information bar appears on the screen for 5 seconds. In this information bar, you will find the following indications: Channel name Received satellite Current date Current time (According to the presetting in menu item “Time“). Storage location TTX symbol This symbol is displayed if the selected broadcasting station offers Teletext. EPG symbol This symbol is displayed if the selected broadcasting station offers an electronic programme guide. Heart symbol The heart symbol is displayed if you have included the channel in your favorite list. Channel- group The corresponding channel-group symbol is displayed if you have included the channel in your

symbols is provided on the next page. Info Information on the current and the following programme “Now” – “Next” Info Information on the currently active channel list Channel-group symbols Symbol Channel group Sport News Music Movie Shopping Education Leisure  Should the current programme belong to the general channel group, no symbol will appear.

You can do individual settings of your receiver using the menus in the user interface. For this purpose, both the receiver and the TV set need to be switched on and connected by a Scart or HDMI cable. Press the “MENU” key. The main menu will be displayed. By pressing the “EXIT“ or the “MENU“ key, you can exit this menu again. When you exit the main menu, an information bar appears on the screen for 5 seconds. Navigation within the menus Top (arrow 1): menu name (the corresponding function symbols are displayed at the bottom) Middle (arrow 2): sub-menu or menu items Below (arrow 3): The information bar shows you the keys with which you can navigate in the current menu. 3 1 2

language in which the OSD menu is to be displayed. Channel (symbol: TV) Page: 42 TV Channel List Page: 42 Radio Channel List Page: 42 Delete All Page: 42 Installation (symbol: satellite antenna) Page: 48 Antenna Setup Page: 48 TP Scan Page: 49 Preset Scan Page: 49 Auto Scan Page: 50 System Setup (symbol: Receiver) Page: 52 Audio Language Page: 52 TV System Page: 52 Channel setup Page: 52 Time & Timer setting Page: 53 OSD Setting Page: 53 Parental Lock Page: 53 LNB Power Page: 54 Other Page: 54 Tools (symbol tool case) Page: 58 Default Value Page: 58 Software-Update Page: 58 Game Page: 58 Information Page: 58

within the menus. The selected menu items are marked. Confirm your selection with the “OK” key. By pressing the “EXIT” key you can exit the menu again. Changes must be confirmed additionally. Apart from this, the numerical keys are required in further sub-menus.  In each menu, an information bar will be displayed containing all selection options. Example: Setting the receiver to summer time. Press the “MENU“ key, select "System Setup", press the OK key, then go to "Time & Timer setting", press the “OK” key, enter Time and press the “OK” key again. Set “GMT+02:00“ in the item GMT Offset. Quit menu by pressing the "EXIT“ key.  Setting for Central European summer time: GMT+02:00 winter time: GMT+01:00

Sub-menu Description TV channel list 1 Favorite, 2 Move, 3 Find, 4 Sort, 5 Edit, 6 Type, Select, V- V+ Group, OK Enter, EXIT Exit Radio channel list as indicated above Delete all Deletion of the complete channel list. For this purpose: Enter password (default value 0000) and confirm warning message with Yes. 1 Favorite By pressing the 1 key you can determine your favourite channels. Next to the corresponding channels, a heart symbol will be displayed. 2 Move By pressing the 2 key, the move symbol will appear behind the marked channel. By pressing the keys CH▲ and CH▼, the channel will be moved to the desired position. The procedure must be confirmed with OK. 3 Find Channel scan function. By entering letters in the appearing keyboard, a filtered channel scan is possible. By pressing the keys CH▲, CH▼, V- and V+, you can mark the desired letter. Confirm the marked letter by pressing the OK key.

offered options. The list must be confirmed with OK. As long as the existing list has not been overwritten, the last status before confirming can be restored. 5 Edit  This option is not available in the favourites list or a channel group. After entering the password (default value 0000), new selection options will appear. Sub-menu Description Edit 1 Delete, 2 Skip, 3 Lock, 4 Create, 5 Edit, 6 Del all, Select, V- V+ Group, P+P- Page, EXIT Exit 1 Delete By marking with the 1 key, selected channels can be marked to be deleted. Please confirm your selection and the safety message by pressing the "OK“ key. 2 Skip By marking with the 2 key, selected channels can be marked to be skipped. Please confirm your selection and the safety message by pressing the "OK“ key. Then, the selected channels are skipped when zapping. A direct input is still possible.

marked to be locked. Please confirm your selection and the safety message by pressing the "OK“ key. Then, the selected channels require the entry of a password (parental lock). 4 Create By pressing the 4 key, the menu "Create" will be displayed. Here, a new channel can be created. Option Description Satellite Satellite selection (example: Astra1 19.2° East) TP Index Select the new transponder on the selected satellite. TP Frequency Data corresponding to the selection of the created transponder. Symbol Rate Data corresponding to the selection of the created transponder. Polarity Data corresponding to the selection of the created transponder. Name Determination of the channel name. By pressing the OK key, an editing mask will be displayed. By pressing the keys CH, CH, V- and V+, the curser can be moved over the keyboard. The selected field is marked yellow. To select it press the OK key. The cursor jumps to the next place. Select the symbol group with the keys 1, 2 and

For deleting a symbol mark the “Del“ field and press the OK key. Select the "OK" field as soon as the channel name is complete and press the "OK" key to confirm. The changed channel name will be accepted. If you want to exit the keyboard without any change, press the EXIT key or mark the “Exit“ field and press the OK key. Video PID Video PID input with the 0-9 keys of the remote control Audio PID Audio PID input with the keys 0-9 of the remote control PCR PID PCR PID input with the keys 0-9 of the remote control Save To exit with saving changes select save and confirm by pressing the OK key. Exit To exit without saving changes select save and confirm by pressing the OK key. 5 Edit By pressing the 5 key, the editing menu will be displayed. Here, you can change the individual parameters as desired. Option Description Name Changes the name of the currently selected channel.

displayed. By pressing the keys CH, CH, V- and V+, the curser can be moved over the keyboard. The selected field is marked yellow. To select it press the OK key. The cursor jumps to the next place. Select the symbol group with the keys 1, 2 and 3 of the remote control. For deleting a symbol mark the “Del“ field and press the OK key. Select the "OK" field as soon as the channel name is complete and press the OK key. The changed channel name will be accepted. If you want to exit the keyboard without any change, press the EXIT key or mark the “Exit“ field and press the OK key. Video PID Video PID input with the 0-9 keys of the remote control Audio PID Audio PID input with the keys 0-9 of the remote control PCR PID PCR PID input with the keys 0-9 of the remote control Save To exit with saving changes select save and confirm by pressing the OK key. Exit To exit without saving changes select save and confirm by pressing the OK key.

Via the 6 key you can mark all channels to be deleted. Thereafter, individual channels can be deselected again by pressing the 1 key. Please confirm your selection and the safety message by pressing the "OK“ key. 6 Type (channel group) Here, you can assign selected channels to determined channel groups (Types) as desired. Please confirm selection and safety message by pressing the "OK“ key. You can exit the menu by pressing the "EXIT“ key.

Sub-menu Description Antenna setup Satellite Satellite selection (example: Astra1 19.2° East) LNB Type Select LNB type (default value is Universal) 22K 22KHz activation, (Note: with LNB type Universal, activation occurs automatically) DiSEqC Select DiSEqC level DiSEqC Switch Select DiSEqC command Example: Astra and Hotbird double reception Astra = 1 / 4 Hotbird = 2 / 4 Disable for positioner: Not enabled Positioner By pressing the “OK“ key you will go to DiSEqC positioner menu. Please refer to the operating manual of your DiSEqC motor for help. Polarity H (Horizontal), v (vertical), H/V (automatic operation)

preset frequencies (transponders) individually. The transponder details can be changed manually. The procedure is initiated with "Scan“. Satellite Selection of the satellite to be scanned TP Index Frequency selection The selection options are displayed 1 Add, 2 Delete, 3 Delete all See following table for TP Index. TP Frequency Setting of the frequency Symbol Rate Setting of the symbol rate Polarity H = horizontal, V = vertical Scan Mode All = encrypted and unencrypted channels Free = only unencrypted channels Search Start scan by pressing the OK key. The channels and frequency found are added. Preset Scan Scanning of preset frequencies (transponders). (Normal automatic scan) Satellite Selection of the satellite to be scanned

unencrypted channels Free = only unencrypted channels Scan Channel Selection between TV and radio or only TV or only radio Search Start scan by pressing the OK key. Auto Scan (unique function that can be used without any previous knowledge), Here you can scan a selected satellite (example: Astra1 19.2° East) completely to search for new channels. For this purpose, no special information is needed. You can choose between free-to-air channels and all TV and radio channels. The procedure is initiated via "Scan“. The signal strength and quality is displayed permanently. Satellite Selection of the satellite to be scanned Scan Mode All = encrypted and unencrypted channels Free = only unencrypted channels Scan Channel Selection between TV and radio or only TV or only radio Search Start scan by pressing the OK key. The channels found are added.

No. Sub-menu Description 1 Add Create new frequency (transponder): Menu item "TP frequency": Frequency: set desired frequency Menu item "Symbol rate": set corresponding symbol rate Menu item Polarity: set corresponding polarisation The new frequency (transponder) is created after execution. When exiting the menu confirm the safety message by pressing the OK key. Only after confirmation the new frequency will be created. For scanning the newly created frequency, initiate the menu item "Scan". 2 Delete Delete the selected transponder. When confirming the safety message, the transponder and all channels on it will be deleted. 3 Del(ete) all When confirming the safety message, all transponders and all channels on them will be deleted.

Sub-menu Description Audio Language First Audio Preselection of audio language (if offered by the broadcasting station) Second Audio Preselection of audio language (if offered by the broadcasting station) TV System Display Mode Selection of the transmission system Default selection: HDMI 576i Aspect Mode Selection of the aspect ratio Default selection: 4:3 Letterbox Video Output CVBS Dolby Digital Enable (On) / disable (Off) Channel setup Start-up channel: Determination of the desired TV or radio channel appearing when switching on the receiver Boot on Channel Enable (On) / disable (Off) Mode TV = the start-up channel is a TV channel Radio = the start-up channel is a radio channel Startup Channel: By pressing the OK key, a channel list will be displayed

channel. Confirm the selected channel by pressing the OK key. Time & Timer Setting Time Optional input of time and time zones. See following table for time setting. Timer See following table for timer setting. OSD Setting Subtitle Display Enable / disable OSD Timeout Menu display time (OSD time lock) OSD Transparency Menu transparency Load Default OSD Setting OSD default value can be restored Parental Lock (password settings, requires password input) Factory password: 0000 Installation Lock Deactivation of password input in the Installation menu Channel Lock Deactivation of password input for locked channels (parental lock)

(Make sure you will remember the new password) Confirm Password Confirm new password. LNB Power Enabling and disabling LNB power supply. ON is preset. Other Auto shutdown: 180 min / 120 min / 60 min / disable Preset: 180 min Using the “Auto Shut Down” function you can function you can set the number of minutes after which the receiver will automatically enter stand-by mode, if it does not receive any commands within the set period. You can choose between 60, 120 and 180 minutes. 2 minutes before the end of the set period a corresponding notification will be shown briefly to inform you. If you do not want then want the receiver to enter stand-by mode, enter a command using the remote control. The set period will then start from the beginning. In order to deactivate this function, select “Disable”. This function serves to protect the environment.

Sub-menu Description GMT Usage Enable / disable GMT Offset Setting of the location-dependant divergence to Greenwich Mean Time Date Enabled if sub-menu “GMT Usage“ is disabled: Date input with the keys 0-9 of the remote control Time Enabled if sub-menu “GMT Usage“ is disabled: Time input with the keys 0-9 of the remote control Time Display Enabling / disabling of the time display on the TV screen.  If GMT Usage is enabled, time in the standby mode on the front panel of the receiver is set automatically.

Sub-menu Description Timer Number Selection of timer number 1-8. Timer Mode Type of repetition (once, daily, weekly, monthly, yearly, off). With the setting “Off“, the timer will be disabled. Timer Service Switching between programme timer (TV or radio channels) and reminding function (message). Wakeup Channel With the timer service setting “Message“, you have following options: Birthday, Anniversary, and General With the timer-service setting "TV Channel“ or "Radio Channel“, you can select channels Wakeup Date Date input with the keys 0-9 of the remote control On Time Time input with the keys 0-9 of the remote control Duration Input duration of the event with the keys 0-9 of the remote control.  However, the timer can also be programmed via the EPG mode. Example: Press the “EPG“ key. Via the 1 key you will then get an event list. By using the keys CH▲ and CH▼, you can select the desired event. After

the result can be taken over directly to the timer by pressing the 2 key.

Sub-menu Description Default Value (requires password input) Reset receiver to the default value. All changes are cancelled. If the receiver is reset to the default values via the OSD menu, the language selection appears in the main menu after completion of the procedure. Now, switch off the receiver with the mains switch. As soon as 5 seconds have passed, you can switch it on again. In the condition as supplied to the customer, the receiver starts in normal mode. Please note: the default values are restored if you keep the standby key at the front side of your receiver pressed for more than 10 seconds. Software- Update (requires password input) Please note: A software update has NOTHING to do with a scan for new TV channels. Therefore, please initiate an automatic scan. By means of a software update you can load new operation software in case of need. An update via satellite or RS232 is also possible. Game Here, the three games Tetris, Snake and Othello are available. Information Technical details

 The update has nothing to do with the storage of new TV channels. It is rather meant to update the system software of the receiver.  Normally, the update is not required for a trouble- free operation of the receiver.  You must direct your satellite system towards the satellite Astra1 19° East to be able to update the software.  Updating the software may take up to an hour. After the upgrade it is recommended to load the default settings additionally. ATTENTION: with this, the channel list you created will be deleted.

Switch between TV and SAT With the “TV/SAT” key you can switch between TV and satellite functions. (This function has to be provided by your TV set). ð Press the “TV/SAT” key until you have set the desired function. Switch between TV and radio With the “TV/Radio” key you can switch between TV and the radio function. Now, the receiver transmits a radio channel and shows a background image. ð To return to the TV channel, press the “TV/Radio” key of the remote control. ZOOM With the zoom function you can enlarge a section of the image. ð Press the “ZOOM” key. With each pressing of the “ZOOM” key, a section of the image will be enlarged gradually. ð Select the image section with the keys CH▼, CH▲, V- and V+. By pressing the “EXIT” key, you can exit this mode.

Here you have the option to edit the channel list as already described earlier under menu item “Channel“. AUDIO With the “AUDIO” key you can select the audio track if a broadcasting station offers multi-channel sound. Additionally, you can enable the Dolby Digital mode here. (For this purpose you will additionally need a Dolby Digital system. The connection is made on the rear of the device via the COAXIAL socket). EPG Electronic Programme Guide. To activate this function, please press the “EPG“ key. The channel list will be displayed. With the keys CH▲ and CH▼, you can select a channel. With the keys P+ and P-, you can jump 10 channels up or down. On the right side, the current and the following event will be displayed. For getting detailed information on the current event, press the 2 key. Press the 1 key to display the complete event list of the selected channel. With the keys V+ and V-, you can scroll between the days. With the keys CH▲ and CH▼, you can scroll up and down the events. You will get detailed information on a selected event (programme) by pressing the 1 key. A selected event of a channel will be taken over directly to the timer by pressing the 2 key.

your TV set. For Teletext reception, the selected channel must support this function. The TTX symbol appears when channels are changed. Comparing our receiver with others you will notice that our Teletext is extremely fast. ð Press the “TEXT“ key to start Teletext. ð For switching off Teletext, press the “EXIT” or “TEXT” key. Using Fasttext functions The coloured keys on the remote control are meant for Fasttext and are enabled after invoking another Teletext page. These functions will be available for some channels only. You can get there directly by pressing the small coloured keys on the remote control. ð Press the desired key. M/P Press the “M/P“ key to go to the multi-picture mode. Now, 9 channels will appear simultaneously on your screen, starting with the current channel. With the keys CH▼, CH▲, V- and V+, you can move the yellow marking bar. The marked channel is displayed in real time. All other channels are displayed as freeze images. To enable the desired channel, mark it and then press the “OK” or "EXIT” key.

picture mode. The channel you marked last will appear as complete image on your screen. MUTE By pressing the “MUTE“ key, the sound will be turned off. By pressing the “MUTE“ key again, the sound will be turned on again. FAV ð Press the “FAV” key. On the screen you will see the favorite list selected by you. ð Select a channel out of the favorite list by pressing the CH▲ and CH▼ keys. ð With the keys V+ and V-, you can switch between the favorite list and the channel groups. ð Press the “OK” key to select. ð Press the “FAV“ key to switch between the favorite list and the channel groups. Select with the V- and V+ keys. ð To exit the favorite list or the channel group, press the 1 key. RECALL By pressing the “RECALL” key, you will return to the previously selected channel.

antenna For this purpose, press the “INFO” key. Apart from the current reception parameters, you will get information on the signal strength and quality. Additionally, you can enable an acoustic signal by pressing the 1 key.  An acoustic signal will be emitted by the TV set. The higher the signal, the better the direction of the antenna. 0 - Sleep timer You can go to the sleep timer in normal mode by pressing the 0 key. By pressing the 0 key again, you will have following setup options: off, 10, 30, 60, 90, 120 minutes. After this time, the receiver will be switched off automatically. PAUSE For this purpose. press the “PAUSE” key. The TV image will be ”frozen“. By pressing the "PAUSE" key again, it will be disabled.

ð Separate the receiver and connected equipment from the power supply. ð Loosen the LNB cable from the receiver. ð Take the batteries out of the remote control, if you will not use the receiver for a longer period of time. ð Pack the receiver, the cables and the remote control in a cardboard box. ð Store the receiver and all accessories in a dry and dust-free room. ð Protect the receiver from frost. Cleaning Caution! The receiver must not become wet. Never clean it with a wet cloth. Do not use any cleaning agent containing solvents like petrol or thinners for cleaning. These agents may damage the surface of the casing. ð Clean the casing of the receiver with a dry cloth. ð Clean the display of the receiver with a slightly wet cloth.

Symptom Possible cause and remedy Satellite cannot be found, or no signal Example: Astra1 19.2° East 1 key (default setting: “Das Erste“) “INFO“ key (“Das Erste“, FR11837) Signal AND quality are both at 0% Direct vertical reflector to the south. Turn some millimetres to the left, wait approx. 3 seconds and repeat, until signal AND quality are displayed. With a signal of approx. 60%, the black background disappears and the TV image will be displayed. For changing the satellite please select a current channel out of the preset channel list and then press the INFO key. Frontal display dark The mains cable is not connected. Connect the mains cable with the power source. No sound or image, but receiver menus are displayed The antenna is not directed towards the satellite. Direct the antenna properly. No signal (with symbol). Check the cable connection from the LNB to the receiver and from the receiver to the connected equipment. Direct the antenna.

not display any image. The system is not connected properly. Check connection of the SCART cable or HDMI cable. The TV set is not in AV mode. Switch the TV set to the respective AV input. Poor image, blocking error, formation of small blocks, sound stops The antenna is not directed exactly towards the satellite. Direct the antenna more precisely. For this purpose, use the “Info” key of the remote control. The signal strength will be displayed for directing the antenna properly. The LNB is defective. Replace the LNB. No image, no sound, signal strength and signal quality OK The satellite antenna has been directed to a wrong satellite. Bad reception of: DSF, etc. Wireless telephone is disturbing (DECT standard). Move your telephone to another place. System crash (receiver cannot be operated anymore.) Should it come to the improbable case of a system crash, separate the receiver from the mains supply. Connect it again after 10 seconds. With this, the problem can be solved usually. Please note: a software crash is not a malfunction and no guarantee will apply. For technical equipment (e.g. also PC, radio network, etc.) a software crash can be solved simply and quickly by following this procedure.

work. The batteries are exhausted. Replace the batteries. The remote control is not directed properly. Aim the remote control towards the front side of the receiver and ensure that there is no obstacle between the remote control and the receiver. Channel has received new frequency and is not transmitted anymore with the current data Delete the corresponding channel and carry out an automatic scan. Exit favourites list Press the FAV key and the 1 key. Password The default password is 0000. Cannot remember personal password Please contact the service hotline if you have forgotten your personal password. Default value The default settings are restored if you keep the standby key at the front side of your receiver pressed for more than 10 seconds. Caution! By doing this, your personal settings will get lost. If a problem cannot be rectified in spite of this, please contact your specialized dealer or the manufacturer.

Never throw the receiver into normal household waste. Ask your municipal authorities or local government about different methods for disposing of the equipment in an eco-friendly and proper manner. Never throw the batteries into normal household waste. Batteries may contain toxic agents. Therefore, it is essential to dispose of the batteries according to the prevailing statutory regulations and the statutory return obligation. Ask your municipal authorities or local government about different methods of disposal in an eco-friendly and proper manner. Hand over used batteries to a collection centre. With this you will make a positive contribution to pollution control.

280 × 170 × 46 Weight in grammes Receiver 904 g Remote control 80 g (without batteries) Range of input frequency 950 MHz ~ 2150 MHz IF band width 55 MHz / 8 MHz (below 5MS/s) LNB power supply 13/18 V, 0.30 A max. Overload protection LNB control 22 kHz ± 2 kHz, 0.6 V pp ± 0.2 V DiSEqC control Version 1.0, Version 1.2, tone burst A/B Symbol rate 2 ~ 35 MS/s Input speed Max. 15 Mbit/s Error correction (FEC) 1/2, 2/3, 3/4, 5/6, 7/8, auto Aspect ratio 4:3 letterbox, 4:3 PanScan, 16:9 Video resolution 720 x 576 (Pal), 720 x 480 (NTSC) Audio mode Left, right, stereo, AC3 digital sound Connection options LNB IF input Type F, IEC 169-24 IF OUT Type F, IEC 169-24 TV SCART (output only) Audio L, R, Video (CVBS) VCR SCART (output and input) Video (CVBS), Audio L, R RCA (CINCH) Audio L, R

HDMI HDMI connection RS 232 RS 232 (Service) Power supply Input voltage power pack 100-240 V ~, 50/60 Hz Power consumption approx. 20W (operation with Single LNB) approx. 5W (receiver only, operation mode) approx. 2W (standby) Operating temperature 0 ºC ~ +40 ºC Storage temperature – 40 ºC ~ + 65 ºC

90579 Langenzenn Telephone: 0049 (0)9101 / 702 – 0 E-Mail [email protected] Website: www.schwaiger.de Dear customer, Past experience has shown that many complaints can be settled through a simple telephone call. In case problems should arise with your device we kindly ask you to contact our service hotline first. Proceeding like this will save you time and possible irritation. Our hotline personnel will be glad to help you and explain the exact procedure of guarantee handling, should it become necessary to send in your device. Service hotline: 0049 (0) 9101-702-299

Schwaiger GmbH is in conformity with the prevailing statutory regulations at the time of purchasing the product. The term of guarantee is 2 years. Modifications of the device lead to an extinction of the manufacturer’s guarantee obligation. A crash of the system software is not considered a malfunction and no guarantee will apply.

following guidelines and standards for this product: • Low-voltage guideline 2006/95/EC • Guideline on electromagnetic compatibility, 2004/108/EC • Ecodesign Directive 2009/125/EC, regulation 107/2009 Equipment type/model: Digital Satellite Receiver DSR6020 011 Langenzenn, 23/04/2010 SCHWAIGER GmbH

DC Direct Current Connection for direct current Cinch connector Coaxial connector for connecting TV set or stereo system. DiSEqC Digital Satellite Equipment Control Digital system, with which the receiver can control different components of the external unit. It is especially used for selecting from multiple satellite positions (for example Astra and Eutelsat). EPG Electronic Programme Guide IF connector Coaxial connector for LNB antenna cable. FTA Free-to-air services Free-of-charge services that can be received without a special decoder. HDMI Connection for digital transmission of audio and video signals. LNB Low Noise Block Amplifier / Converter A device at the centre of the antenna, which converts high-frequency incoming signals from satellites into a low-frequency range and amplifies them simultaneously. Mute Key of the remote control for turning off sound

PID Identification number of a received data stream The PIDs ensure that a channel is received completely. Receiver Receiver unit, which converts signals from the antenna into video and audio signals. SCART A 21-pole connector for connecting the TV set to the receiver. Swap function Switches between current channel and channel last watched. Transponder Satellite frequency. Several digital channels can be broadcasted simultaneously on a transponder. VCR Abbreviation for Video Cassette Recorder. YUV YUV is a signal formed by one brightness (Y) and two colour difference signals (UV). This signal is transmitted over three individual cables.